I'm searching a way to be able to display one modal view controller after another one, and make the second appear while the first is disapearing.
The problem is that the dismiss call that is done inside the first modalviewcontroller applies to both and SecondController is never shown.
Putting the first dismiss before or after the parent call does not change anything.
If first dismiss is set wih animate= NO, everything works fine. But I need the animation.
I planned to do that this way, but the problem is that the dismiss call that is done inside the first modalviewcontroller applies to both and SecondController is never shown.
I don't understand why because each modal view has its own navigationcontrollers, so they shouldn't collide.
I tried another way by showing the second modal view with a NSTimer after 0.5 sec, but it's not satisfying : the second appears when the first has completely disapeared. Not smooth at all... If I set the delay less than 0.5 sec, the second modal view never shows up. And using such a timer to make this does not seem to be a good way of coding.
Main.m
- (void) entry {
FirstController *nextWindow = [[FirstController alloc] initWithNibName:#"theNIB" bundle:nil];
nextWindow.caller = self;
UINavigationController* navController = [[UINavigationController alloc] initWithRootViewController:nextWindow];
[self.navigationController presentModalViewController:navController animated:YES];
[nextWindow release];
[navController release];
}
- (void) thingsDoneInFirstModalController:(OBJECT)returnValue retval2:(OBJECT2)returnValue2 {
[self display2ndController];
}
- (void) display2ndController {
SecondController *nextWindow;
nextWindow = [[SecondController alloc] initWithNibName:#"NIB2" bundle:nil];
UINavigationController* navController = [[UINavigationController alloc] initWithRootViewController:nextWindow];
[self.navigationController presentModalViewController:navController animated:YES];
[navController release];
[nextWindow release];
}
1st ModalViewController.m
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath {
[self.navigationController dismissModalViewControllerAnimated:YES];
[self.caller thingsDoneInFirstModalController:theResult retval2:someMoreResult];
}
Do you know a way to make this possible (make the second view appears while the first one is disappearing), with some code for example ?
Thank you.
Try creating some dummy ViewController, and present your second one using it.
Related
I'm trying to do a switch view. My first view is a storyboard and i want to switch for view2, i have no problem when click the botton in my first view everything is fine. The prolem is when i am trying to go back, the screen is going black and is not going back to the first view. Here the code that i'm using.
ViewController.h
- (IBAction)View2:(id)sender;
ViewController.m
- (IBAction)View2:(id)sender {
View2 *second = [[View2 alloc] initWithNibName:nil bundle:nil];
[self presentModalViewController:second animated:YES];
}
And here the code that i am using to go back from the second view to the first.
view2.h
- (IBAction)back:(id)sender;
View2.m
- (IBAction)back:(id)sender {
ViewController *second = [[ViewController2 alloc] initWithNibName:nil bundle:nil];
[self presentModalViewController:second animated:YES];
}
Am I doing some kind of error?
Thanks
Your issue is in View2.m
- (IBAction)back:(id)sender {
[self dismissModalViewControllerAnimated:YES];
}
should do the trick
Apple has a View Controller Programming Guide that I suggest skimming through
UPDATE
If you need to jump back more that one ViewController, you should use NSNotificationCenter or keep a reference to the viewController you need to jump back to.
In my experiences, the following line does 1 of 2 things (where self is a subclass of UIViewController)
[self dismissModalViewControllerAnimated:YES];
1) If self has presented another view controller, the line above will dismiss all view controllers that have been presented on top of self
2) If self has not presented any other view controller, the line above will dismiss self back to the previous view controller
I'm not sure how to do this. So I originally had a ViewController that had one .xib, with one main view. I present it like this:
DogViewController *dvc = [[DogViewController alloc] initWithNibName:#"DogViewController" bundle:nil];
dvc.modalPresentationStyle = UIModalPresentationFormSheet;
dvc.modalTransitionStyle = UIModalTransitionStyleFlipHorizontal;
[self presentModalViewController:dvc animated:YES];
[dvc release];
So that works fine. However now from a button press in the DogViewController.xib, I want to dismiss the current form sheet, and show another form sheet with some additional questions before proceeding. So I started by adding another view to in my original .xib of DogViewController, then got stuck in the logic of how to dismiss the first one, and show the second one. I'm assuming I need some outlet to the new view in the same .xib, but from there I'm lost. Thanks.
The way to do this would be to set it up with a UINavigationController as Mathiew mentions. However, if you really want to transition between two views on one view controller, you can refer to this sample code from Apple:
http://developer.apple.com/library/ios/#samplecode/ViewTransitions/Introduction/Intro.html
The code uses ImageViews to demonstrate the effect but I don't see why you can't use views instead :)
You can add a view within the other view in front of all of the other objects and just use its hidden property to control whether it's shown or not.
Why don't you use a navigation controller in your modal view, create another xib and do a [self.navigationController pushViewController:secondViewController animated:YES];
If you have a good reason, you can set a second view outlet secondView and use code like
UIView* superview = [self.view superview];
[self.view removeFromSuperView];
[superview addSubview:self.secondView];
Very simple solution is to hold reference to MainViewController and call methods on it that swap between two view controllers.
Like this:
#implementation MainViewController
- (void)showDogViewController {
[self dismissModalViewControllerAnimated:YES];
DogViewController *dvc = [[DogViewController alloc] initWithNibName:#"DogViewController" bundle:nil];
dvc.modalPresentationStyle = UIModalPresentationFormSheet;
dvc.modalTransitionStyle = UIModalTransitionStyleFlipHorizontal;
dvc.mainViewController = self;
[self presentModalViewController:dvc animated:YES];
[dvc release];
}
- (void)showCatViewController {
[self dismissModalViewControllerAnimated:YES];
CatViewController *cvc = [[CatViewController alloc] initWithNibName:#"CatViewController" bundle:nil];
cvc.modalPresentationStyle = UIModalPresentationFormSheet;
cvc.modalTransitionStyle = UIModalTransitionStyleFlipHorizontal;
cvc.mainViewController = self;
[self presentModalViewController:cvc animated:YES];
[dvc release];
}
}
#end
#implementation DogViewController
- (void)showCatViewController {
[mainViewController showCatViewController]
}
#end
#implementation CatViewController
- (void)showDogViewController {
[mainViewController showDogViewController]
}
#end
When I push cancel button in the third view, I want to go back to the first view directly.
I also want to remove the second view.
How can I do that?
This is the code.
// this part is in the first view.
self.second = [SecondController alloc] init];
[self.view addSubview:second.view];
// this part is in the second view.
ThirdController *thirdController = [[ThirdController alloc] initWithStyle:UITableViewStyleGrouped];
self.navigationController = [UINavigationController alloc] initWithRootViewController:thirdController];
[self.view addSubview:navigationController.view];
// this part is in the third view.
- (void)cancel {
[self.view removeFromSuperview]; // this only goes to the second view.
}
EDIT:
Can I use popToViewController in called contoller? My app crashes.
I thought popToViewController can be used only in calling controller.
And popToViewController is used when it was pushed.
I did add not push.
[self.navigationController popToViewController:[[self.navigationController viewControllers] objectAtIndex:0] animated:YES];
popToViewController:animated: is a UINavigationController method that you use when popping view controllers off the navigation controller stack. It doesn't fit for this scenario.
This user is adding subviews, not pushing them on a navigation controller stack.
As a note, it appears as a matter of design you should be using a navigation controller with the first view as the root controller, then the second pushed on the stack, and the third pushed on the stack. Then all you have to do is [self.navigationController popToRootViewControllerAnimated:YES].
I think this will work if you want to keep your current architecture:
// this part is in the third view.
- (void)cancel {
// remove the second view (self.view.superview) from the first view
[self.view.superview removeFromSuperView];
// can't recall, possibly you still need to remove the third view, but i think removing the superview will do it.
// [self.view removeFromSuperView];
}
If you prefer to try the UINavigationController route, then the easiest path is to create a new project in Xcode and select the type for a Navigation-Based Application or a Master-Detail Application. This will create a UINavigationController in a nib and add it to your window. You can then set the root view controller in Interface Builder to your FirstViewController class.
If you prefer to create the UINavigationController in code, then that is also possible. I show that below, along with the rest of the code you need, regardless of whether you create your UINavigationController in a nib in IB or in code.
I also recommend reading the View Controller Programming Guide for iOS.
In your app delegate or some other code:
-(void)application:(UIApplication*)application didFinishLaunchingWithOptions:(NSDictionary*)launchOptions [
// I would recommend setting up the UINavigationController and FirstViewController as IBOutlets in your nib, but it can be done in code.
FirstViewController* fvc = [[FirstViewController alloc] initWithNibName:#"FirstView" bundle:nil];
UINavigationController* navController = [[UINavigationController alloc] initWithRootViewController:fvc];
[window addSubView:navController.view];
[window makeKeyAndVisible];
[fvc release];
[navController release];
}
In the first view controller:
SecondViewController* svc = [[SecondViewController alloc] initWithNibName:#"SecondView" bundle:nil];
[self.navigationController pushViewController:svc animated:YES];
[svc release];
In the second view controller:
ThirdViewController* tvc = [[ThirdViewController alloc] initWithNibName:#"ThirdView" bundle:nil];
[self.navigationController pushViewController:tvc animated:YES];
[tvc release];
In the third view controller:
-(void)cancel {
// returns to the first view controller
[self.navigationController popToRootViewControllerAnimated:YES];
}
Use
- (NSArray *)popToViewController:(UIViewController *)viewController animated:(BOOL)animated
to go back to a specific view controller.
Try this:
[self.navigationController popToViewController:[self.navigationController.viewControllers objectAtIndex:1] animated:YES];
This will pop to the view at index 1. Hope that Helps!
// this part is in the third view.
- (void)cancel {
self.first = [SecondController alloc] init];
[self.view addSubview:second.view];
}
And I think if you have you don't need to be worried about removing beneath view, later these will removed.
I have a main window that pops a modal view controller. When done in this modal view controller, it returns to the main window then dismisses itself.
Then the main windows pops a new Modal view controller with animated=YES.
The problem is that the dismiss call that is done inside the first modalviewcontroller applies to both and SecondController is never shown.
Putting the first dismiss before or after the parent call does not change anything.
If first dismiss is set wih animate= NO, everything works fine. But I need the animation.
Main.m
- (void) entry {
FirstController *nextWindow = [[FirstController alloc] initWithNibName:#"theNIB" bundle:nil];
nextWindow.caller = self;
UINavigationController* navController = [[UINavigationController alloc] initWithRootViewController:nextWindow];
[self.navigationController presentModalViewController:navController animated:YES];
[nextWindow release];
[navController release];
}
- (void) thingsDoneInFirstModalController:(OBJECT)returnValue retval2:(OBJECT2)returnValue2 {
[self display2ndController];
}
- (void) display2ndController {
SecondController *nextWindow;
nextWindow = [[SecondController alloc] initWithNibName:#"NIB2" bundle:nil];
UINavigationController* navController = [[UINavigationController alloc] initWithRootViewController:nextWindow];
[self.navigationController presentModalViewController:navController animated:YES];
[navController release];
[nextWindow release];
}
1st ModalViewController.m
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath {
[self.navigationController dismissModalViewControllerAnimated:YES];
[self.caller thingsDoneInFirstModalController:theResult retval2:someMoreResult];
}
What may I do ?
I don't want to catch anything in view....Disapear...
Why does the dismiss colides as they are not called from the same navigation controller ?
The reason is likely the animation when you dismiss it. Try showing the second modal window using the performSelector:withObject:afterDelay:, a method inherited from NSObject. Reference here.
I have the following code where I display a view controller within a navigation controller.
Just for the test I display it for 3 seconds and then dismiss it.
What is happening is that it disappearing - and then reappearing after a second or so.
What am I doign wrong?
- (void) test
{
[myNavCtrl dismissModalViewControllerAnimated:YES];
}
- (void) viewDidAppear:(BOOL)animated
{
MyViewController *ctrl = [[MyViewController alloc] init];
[ctrl setDelegate:self];
myNavCtrl = [[UINavigationController alloc] initWithRootViewController:ctrl];
[myNavCtrl setModalTransitionStyle:UIModalTransitionStyleCrossDissolve];
[self presentModalViewController:myNavCtrl animated:NO];
[ctrl release];
[myNavCtrl release];
[self performSelector:#selector(test) withObject:nil afterDelay:3];
}
The viewWillAppear method is called every time the controller's view appears so you've created a loop. The view appears, it calls the modal view which covers the calling view. When the modal view disappears, the calling view controller's viewWillAppear gets called again. Lather, rinse, repeat.