I've just successfully built openCV as a static library for iOS armv7 architecture.
However, when referencing this library from an app compiled under -o3 (or -o2, -o1) the app just freezes when this library is called.
I'm guessing it's something I didn't set as build flags or options when compiling openCV that's the problem (I compiled openCV using cMake and Xcode 4) - any ideas what I'm doing wrong?
Like #ughoavgfhw said above, it was a threading issue. One task was being completed at an earlier stage than expected (with no checking for this), and ended up creating a recurring loop.
Related
I'm using
newest OpenXSDKframework (debug)
included in embedded Binaries
Build Settings: Embedded Content Contains Swift Code YES
Other linker -Objc
XCode 7.31
swift
when import OpenXSDKCore
this error is showing
.../ViewController/OpenXBannerViewController.swift:11:8: Module file
was created by an older version of the compiler;
rebuild 'OpenXSDKCore' and try again:
.../OpenXSDKCore.framework/Modules/OpenXSDKCore.swiftmodule/i386.swiftmodule
is this related to the Framework producing Company ?
what should i do - to fix that error?
thanks
That error will occur if the compiled framework (binary) was compiled using earlier version of compiler and in the most of the iOS cases it means that the binary was compiled using some earlier versions of Xcode.
Most probably, your OpenXSDKCore was not built using Xcode 7.3 that you use. The best course of action would be downloading the framework source code and compiling it by yourself.
If you don't have that option you can only wait or downgrade to earlier Xcode version.
I am working on an iphone application using openCV framework.
Everything was working fine. however lately with the release of iOS 6 and XCode 4.5 I was migrating my project to XCode 4.5
When building I encountered this error:
ld: file is universal (2 slices) but does not contain a(n) armv7s
slice:
/Users/jobs/iPhone_Client/workspace/MyProject/third-party/OpenCV.framework/OpenCV
for architecture armv7s clang: error: linker command failed with exit
code 1 (use -v to see invocation)
** BUILD FAILED **
The following build commands failed:
Ld build/MyProject.build/Debug-iphoneos/MyProject.build/Objects-normal/armv7s/MyProject
normal armv7s (1 failure)
As I understood this is due to the new armv7s architecture.
OpenCV is apparently it is not compiling with armv7s.
How can I fix this issue?
Where can I find a new release of the framework that is compatible with the armv7s architecture?
And if there is no compatible framework available, is there a way to get the source code and create my own library compiled against the new architecture? Maybe some quick steps on how to do it?
Note: Just to note that I need the build for armv7s not armv7.
Thank you
This answer builds upon the one given by n9986. As he suggested, I cloned the repository found at
https://github.com/jonmarimba/OpenCV-iOS
When I downloaded it several references inside the project to different libraries were broken which was strange but they were easy to fix. After they were fixed it behaved exactly as n9986 described, outputting libraries compiled for both armv7 and armv7s. For my purposes however I required that they be bundled into a .framework so that they could be a drop in replacement for the old .framework I have been using.
Previously I had downloaded the latest version of Opencv for ios here and spent quite a bit of time trying to modify their cmake files to compile with support for armv7s. jonmarimba has already restructured the xcode project file to strip away its cmake dependencies which makes changing the target architecture much more intuitive. Unfortunately he does not build as many libraries as come with the standard openCV build. I added a new target to jonmarimba's project for opencv_world which is the target used in the standard openCV release for converting into a framework. Once that was built I used it as a drop in replacement for the static library in the framework file structure generated by the standard openCV release.
The framework I created can be downloaded here. It works perfectly for me as a drop in replacement for my previous opencv2.framework. I did notice however that jonmarimba has not converted the targets for opencv_videostab, opencv_stitching, or opencv_nonfree. It is possible that if you use one of those libraries my framework will not work for you. If that is the case let me know and I can try to set those up as targets in the xcode project for you.
Update
To compile for other architectures, change the target architecture in the included xcode project to whatever you like for the opencv_world library. After you build it, go find the library you just built. Rename the opencv_world library to opencv2 and replace the library file found in the .framework with opencv_world.
Update2
OpenCV 2.4.3 now compiles with armv7s support by default so these solutions are outdated.
Clone the Xcode project for opencv and update the opencv git submodule as per the README:
https://github.com/jonmarimba/OpenCV-iOS
Check the build settings, make sure iOS6 and armv7s are present. Click build. You should now have the armv7s compatible .a files. I just tried this:
$ file libopencv_core.a
libopencv_core.a: Mach-O universal binary with 2 architectures
libopencv_core.a (for architecture armv7): current ar archive random library
libopencv_core.a (for architecture cputype (12) cpusubtype (11)): current ar archive random library
The last entry is for armv7s as per my research so far.
Edit: The last entry is indeed armv7s. I ran the Xcode's own lipo info command:
$ xcrun -sdk iphoneos lipo -info libopencv_core.a
Architectures in the fat file: libopencv_core.a are: armv7 armv7s
You can always just not target armv7s, and only target armv7. Your application will still run fine on the iPhone 5, it just won't be fully optimized for the new instruction set.
Simply, I cloned source from here and build with this tutorial.
Then I got opencv2.framewok that works with armv7, armv7s and simulator.
Stating the obvious, you will need to recompile and rebuild the library openCV.framework and target it for armv7s.
Adjust the library "project settings" and "target settings" before rebuild. good luck!
Probably its possible to build it with CMake. I had one year ago a problem with a medical library I wanted to build for iOS. I could handle that with CMake.
Perhaps this link can be a starter.
http://computer-vision-talks.com/2010/12/building-opencv-for-ios/
Good luck!
Pass -DCMAKE_OSX_ARCHITECTURES="armv6;armv7;armv7s;i386" to cmake when compiling OpenCV library/framework for iOS.
I am trying to build an app (with ARC) that uses the facebook_ios_sdk (the latest version on github).
As recommended by Facebook, I used the build script to create a static library and then added it to the project.
Now when I build the project for an iPhone 5.1 Simulator, it works fine. However, on running it for an actual device (which is running 5.1), it gives the following build error -
ld: in ../facebook-ios-sdk/libfacebook_ios_sdk.a, file is universal but does not contain a(n) armv7 slice for architecture armv7
clang: error: linker command failed with exit code 1 (use -v to see invocation)
Any suggestions on how to resolve this?
You could modify the build script for static library (which was too complicated for me), or just skip the library approach:
add the Facebook sources from SDK to your project
if using ARC, go to "target->build phases->compile sources" and mark all the Facbook source files with the--fno-objc-arc flag
That's it, works for me.
One work around that worked was to change the Valid Architectures from"armv6 armv7" to just armv6
I'm attempting to use the ZeroMQ library in an iPhone app developed in C# using MonoTouch. I've solved almost all of the problems, but have fallen at the last hurdle. I'm using ZeroMQ 2.1.10, and the C# CLR binding/wrapper, and developing in Mac OS X 10.6.8. Here's the story so far:
I first attempted to use ZeroMq in a simple Mono C# Console app. I built ZeroMQ with ./configure, then make and sudo make install, which installs shared library /usr/local/lib/libzmq.dylib. The ZeroMq C# binding clrzmq.dll is a wrapper that uses the 'core' ZeroMq functionality via C Api [DllImport] calls.
The test app didn't work, which I figured out to be that the standard ZeroMQ ./configure produces a 64-bit output, and Mono is only 32 bit. I then rebuilt ZeroMQ with
./configure CFLAGS="-O -arch i386" CXXFLAGS="-O -arch i386" LDFLAGS="-arch i386" --disable-dependency-tracking
My simple C# ZeroMq app then worked correctly.
Moving on, I then tried to use ZeroMq from inside an iPhone app in the iPhone simulator. I discovered that the iPhone only allows statically linked libraries (no dynamic libraries allowed). This is achieved by changing all the C# wrapper calls to
[DllImport("__Internal", CallingConvention = CallingConvention.Cdecl)]
and including libzmq.a directly in the MonoTouch project, and setting extra mtouch arguments
-cxx -gcc_flags "-L${ProjectDir} -lzmq -force_load ${ProjectDir}/libzmq.a"
to ensure the ZeroMQ library is included in the iPhone app.
When running the app in the iPhone simulator, it crashed out, which I traced to a call made from a zmq_init() to socketpair. I finally traced this to the ZeroMQ library having been built against my build machine's MacOS headers and libraries, instead of against the iPhone SDK. This was fixed by
./configure CFLAGS="-O -arch i386 -isysroot /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator5.0.sdk" CXXFLAGS="-O -arch i386 -isysroot /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator5.0.sdk" LDFLAGS="-arch i386" --disable-dependency-tracking
Success in the iPhone Simulator! The simulator requires i386 static libraries built to the iPhone simulator SDK. I now can use ZeroMQ functionality within an iPhone app in the Simulator ONLY. It does not work however on a real iPhone.
This is because a real iPhone requires a library that has been built for the ARM architecture, and against the real iPhoneOS SDK.
(There is a side-issue of building 3 separate libraries - i386, ARM6, and ARM7, and combining all 3 into 'fat' library that can be used in any environment. I need to be able to build for ARM before I get to this problem).
** Finally, my question!! **
The last step is to cross-compile build the ZeroMQ library to ARM. I have been trying all day long to come up with the correct switches for this, and studied all the examples on the internet that I can find, but none seem to have a solution that works.
The closest I have got to working is:
./configure CXX=/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/arm-apple-darwin10-llvm-g++-4.2
CC=/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/arm-apple-darwin10-llvm-gcc-4.2
LD=/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/ld CFLAGS="-O -isysroot /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS5.0.sdk"
CXXFLAGS="-O -isysroot /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS5.0.sdk"
--disable-dependency-tracking --host=arm-apple-darwin10
LDFLAGS="-isysroot /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS5.0.sdk"
AR=/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/ar
AS=/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/as
LIBTOOL=/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/libtool
STRIP=/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/strip
RANLIB=/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/ranlib
This produces a config which make compiles the ZeroMq code, but fails with lots of link errors, e.g.:
ar: libzmq_la-clock.o: No such file or directory
I've tried many other configurations, but they don't even pass ./configure correctly.
Can anyone help me with a suitable ./configure parameter list to produce an ARM architecture static library? This is all I need to get ZeroMQ working on a real iPhone.
And and all help much appreciated!
Just thought I'd share that I found the answer in the end - the trick was to add CPP="cpp" CXXCPP="cpp" to the ./configure statement, giving:
./configure CPP="cpp" CXXCPP="cpp" CXX=/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/arm-apple-darwin10-llvm-g++-4.2 CC=/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/arm-apple-darwin10-llvm-gcc-4.2 LD=/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/ld CFLAGS="-O -isysroot /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS5.0.sdk" CXXFLAGS="-O -isysroot /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS5.0.sdk" --disable-dependency-tracking --host=arm-apple-darwin10 LDFLAGS="-isysroot /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS5.0.sdk" AR=/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/ar AS=/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/as LIBTOOL=/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/libtool STRIP=/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/strip RANLIB=/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/ranlib
I used this configuration to successfully build ZeroMQ for ARM, as used in my new iPhone app I Buzzed First (available at http://itunes.apple.com/gb/app/i-buzzed-first!/id490622820?mt=8 )
That question is not really related to MonoTouch but on how to compile 0MQ on the iOS (ARM). Have a look at: Compile C lib for iPhone
Hopefully it will help you and also cover the next question: fat universal binaries using lipo. The good news is that, if this works on the simulator, then you likely already covered any MonoTouch related issue :-)
Update
Daniel was close, it just wasn't the search path. The Prefix Header under GCC 4.2 was set to:
$(SYSTEM_LIBRARY_DIR)/Frameworks/AppKit.framework/Headers/AppKit.h
I missed that when I was combing through the first 2 times.
I removed it and now all is well.
Original Question
I have been using/building products with a static libraries for about a week now with no issues.
For the first time, I tried to make a distribution build (for ad hoc testing) and I am getting errors all over the place.
The errors, strangely say that it can't find Appkit headers. Which is odd because it is an iPhone app and shouldn't be linking to Appkit headers
Additionally, the library name, "libFJSCodeDebug.a" turns red while when I switch from debug to distribution/release. I figure this must be a big clue.
To test, I duplicated the debug configuration and renamed it release. This built fine. So it seems the problem is somewhere in the configuration. Below is a snippet of what I get in Xcode when I build. (Note: I named my target FJSCodeDebug even though it will be used for both debug and release builds)
Building target “FJSCodeDebug” of project “FJSCode” with configuration “Release” — (169 errors)
Checking Dependencies
cd /[redacted]/FJSCode
setenv PATH "/DeveloperBeta/Platforms/iPhoneOS.platform/Developer/usr/bin:/DeveloperBeta/usr/bin:/usr/bin:/bin:/usr/sbin:/sbin"
/DeveloperBeta/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc-4.2 -x objective-c-header -arch armv6 -fmessage-length=0 -pipe -std=c99 -Wno-trigraphs -fpascal-strings -fasm-blocks -Os -Wreturn-type -Wunused-variable -isysroot /DeveloperBeta/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk -gdwarf-2 -mthumb -miphoneos-version-min=3.0 -iquote /[redacted]/build/FJSCode.build/Release-iphoneos/FJSCodeDebug.build/FJSCodeDebug-generated-files.hmap -I/[redacted]/build/FJSCode.build/Release-iphoneos/FJSCodeDebug.build/FJSCodeDebug-own-target-headers.hmap -I/[redacted]/build/FJSCode.build/Release-iphoneos/FJSCodeDebug.build/FJSCodeDebug-all-target-headers.hmap -iquote /U[redacted]/build/FJSCode.build/Release-iphoneos/FJSCodeDebug.build/FJSCodeDebug-project-headers.hmap -F/[redacted]/build/Release-iphoneos -I/[redacted]/build/Release-iphoneos/include -I/Users/coreyfloyd/Xcode/ProductionProjects/build/FJSCode.build/Release-iphoneos/FJSCodeDebug.build/DerivedSources/armv6 -I/[redacted]/build/FJSCode.build/Release-iphoneos/FJSCodeDebug.build/DerivedSources -c /System/Library/Frameworks/AppKit.framework/Headers/AppKit.h -o /var/folders/R+/R+ofDLtuH1GOYQ1ZQ2C5mk+++TI/-Caches-/com.apple.Xcode.501/SharedPrecompiledHeaders/AppKit-gihvhjsfuggoevbehiszhgrzcska/AppKit.h.gch
/System/Library/Frameworks/AppKit.framework/Headers/AppKit.h:11:33: error: AppKit/AppKitDefines.h: No such file or directory
/System/Library/Frameworks/AppKit.framework/Headers/AppKit.h:12:32: error: AppKit/AppKitErrors.h: No such file or directory
/System/Library/Frameworks/AppKit.framework/Headers/AppKit.h:13:37: error: AppKit/NSGraphicsContext.h: No such file or directory
/System/Library/Frameworks/AppKit.framework/Headers/AppKit.h:14:35: error: AppKit/NSAccessibility.h: No such file or directory
/System/Library/Frameworks/AppKit.framework/Headers/AppKit.h:15:32: error: AppKit/NSActionCell.h: No such file or directory
...... (continues for everything in AppKit)......
Build failed (169 errors)
I'm looking for 1 of 2 solutions:
Obviously, fix the release build to not get these errors
OR
Tweak the debug configuration to have all the important settings that a release configuration requires.
Any ideas??
This
-c /System/Library/Frameworks/AppKit.framework/Headers/AppKit.h
leads me to believe your build target is trying to compile AppKit.h for some reason (while I don't think it should be doing that at all), and/or it's looking for it in the wrong place (i.e. in the root /System instead of in the SDK /Developer/Platforms/...).
You should double check your build settings library/frameworks search paths, and that AppKit.h isn't in the compile phase.
Does your project include Mac OS products? Are you sure you haven't accidently included a Mac library/framework in your frameworks group?
In SDK2.2.1, I don't know why, but the thing that always gets me is when "Active SDK" and "Active Executable" become out of sync (in the build configuration dropdown). This leads to weird linker errors where the iPhone tries to dynamically link against its libraries. This setting seems to occasionally go out of sync whenever I switch from debug/release or device/simulator.
Perhaps its a similar case, its hard to tell without seeing the actual project settings.