what would be the NSRegularExpression to match the text between the "[" and the "]" in the following example:
"[this is some] text i would [like] to [parse] with NSRegularExpression"
Thx in advance :)
Not sure about NSRegularExpression, but I suspect it's like other regular expressions in terms of greediness. So, if there could be multiple [words] or [phrases in brackets] that you want to capture in the same string, you'll have to make sure the regex isn't greedy.
Maybe something like (broken up across a few lines for clarity:)
\[ // find an opening square bracket
([^]]+) // find one or more characters that ARE NOT a square bracket
\] // find the corresponding closing square bracket
Like a Daniel answer right pattern is \\[(.*?)\\]
Let me explain why.
\\[ is mean "open-bracket" symbol. Double slash allow to use special symbol [
All in ( ) allow to union as atomic sequence
. — any symbol without special * ? + [ ( ) { } ^ $ | \ . /!
*? — symbol entry 0 or more times. Match as few times as possible.
\\] — close-bracket
Your pattern should be \[(.*?)\]
Related
My code has a ton of occurrences of something like:
idof(some_object)
I want to replace them with:
some_object["id"]
It sounds simple:
sed -i 's/idof(\([^)]\+\))/\1["id"]/g' source.py
The problem is that some_object might be something like idof(get_some_object()), or idof(my_class().get_some_object()), in which case, instead of getting what I want (get_some_object()["id"] or my_class().get_some_object()["id"]), I get get_some_object(["id"]) or my_class(["id"].get_some_object()).
Is there a way to have sed match closing bracket, so that it internally keeps track of any opening/closing brackets inside my (), and ignores those?
It needs to keep everything that's between those brackets: idof(ANYTHING) becomes ANYTHING["id"].
Using sed
$ sed -E 's/idof\(([[:alpha:][:punct:]]*)\)/\1["id"]/g' input_file
Using ERE, exclude idof and the first opening parenthesis.
As a literal closing parenthesis is also excluded, everything in-between the capture parenthesis including additional parenthesis will be captured.
[[:alpha:]] will match all alphabetic characters including upper and lower case while [[:punct:]] will capture punctuation characters including ().-{} and more.
The g option will make the substitution as many times as the pattern is found.
Theoretically, you can write a regex that will handle all combinations of idof(....) up to some limit of nested () calls inside ..... Such regex would have to list with all possible combinations of calls, like idof(one(two(three))) or idof(one(two(three)four(five)) you can match with an appropriate regex like idof([^()]*([^()]*([^()]*)[^()]*)[^()]*) or idof([^()]*([^()]*([^()]*)[^()]*([^()]*)[^()]*) respectively.
The following regex handles only some cases, but shows the complexity and general path. Writing a regex to handle all possible cases to "eat" everything in front of the trailing ) is left to OP as an exercise why it's better to use something else. Note that handling string literals ")" becomes increasingly complex.
The following Bash code:
sed '
: begin
# No idof? Just print the line!
/^\(.*\)idof(\([^)]*)\)/!n
# Note: regex is greedy - we start from the back!
# Note: using newline as a stack separator.
s//\1\n\2/
# hold the front
{ h ; x ; s/\n.*// ; x ; s/[^\n]*\n// ; }
: handle_brackets
# Eat everything before final ) up to some number of nested ((())) calls.
# Insert more jokes here.
: eat_brackets
/^[^()]*\(([^()]*\(([^()]*\(([^()]*\(([^()]*\(([^()]*\(([^()]*)\)\?[^()]*)\)\?[^()]*)\)\?[^()]*)\)\?[^()]*)\)\?[^()]*)\)/{
s//&\n/
# Hold the front.
{ H ; x ; s/\n\([^\n]*\)\n.*/\1/ ; x ; s/[^\n]*\n// ; }
b eat_brackets
}
/^\([^()]*\))/!{
s/^/ERROR: eating brackets did not work: /
q1
}
# Add the id after trailing ) and remove it.
s//\1["id"]/
# Join with hold space and clear the hold space for next round
{ H ; s/.*// ; x ; s/\n//g ; }
# Restart for another idof if in input.
b begin
' <<EOF
before idof(some_object) after
before idof(get_some_object()) after
before idof(my_class().get_some_object()) after
before idof(one(two(three)four)five) after
before idof(one(two(three)four)five) between idof(one(two(three)four)five) after
before idof( one(two(three)four)five one(two(three)four)five ) after
before idof(one(two(three(four)five)six(seven(eight)nine)ten) between idof(one(two(three(four)five)six(seven(eight)nine)ten) after
EOF
Will output:
before some_object["id"] after
before get_some_object()["id"] after
before my_class().get_some_object()["id"] after
before one(two(three)four)five["id"] after
before one(two(three)four)five["id"] between one(two(three)four)five["id"] after
before one(two(three)four)five one(two(three)four)five ["id"] after
ERROR: eating brackets did not work: one(two(three(four)five)six(seven(eight)nine)ten) after
The last line is not handled correctly, because (()()) case is not correctly handled. One would have to write a regex to match it.
I am trying to parse all the files and verify if any of the file content has strings TESTDIR or TEST_DIR
Files contents might look something like:-
TESTDIR = foo
include $(TESTDIR)/chop.mk
...
TEST_DIR := goldimage
MAKE_TESTDIR = var_make
NEW_TEST_DIR = tesing_var
Actually I am only interested in TESTDIR ,$(TESTDIR),TEST_DIR but in my case last two lines should be ignored. I am new to perl , Can anyone help me out with re-rex.
/\bTEST_?DIR\b/
\b means a "word boundary", i.e. the place between a word character and a non-word character. "Word" here has the Perl meaning: it contains characters, numbers, and underscores.
_? means "nothing or an underscore"
Look at "characterset".
Only (space) surrounding allowed:
/^(.* )?TEST_?DIR /
^ beginning of the line
(.* )? There may be some content .* but if, its must be followed by a space
at the and says that a whitespace must be there. Otherwise use ( .*)?$ at the end.
One of a given characterset is allowed:
Should the be other characters then a space be possible you can use a character class []:
/^(.*[ \t(])?TEST_?DIR[) :=]/
(.*[ \t(])? in front of TEST_?DIR may be a (space) or a \t (tab) or ( or nothing if the line starts with itself.
afterwards there must be one of (space) or : or = or ). Followd by anything (to "anything" belongs the "=" of ":=" ...).
One of a given group is allowed:
So you need groups within () each possible group in there devided by a |:
/^(.*( |\t))?TEST_?DIR( | := | = )/
In this case, at the beginning is no change to [ \t] because each group holds only one character and \t.
At the end, there must be (single space) or := (':=' surrounded by spaces) or = ('=' surrounded by spaces), following by anything...
You can use any combination...
/^(.*[ \t(])?TEST_?DIR([) =:]| :=| =|)/
Test it on Debuggex.com. (Use 'PCRE')
I'd like to extract the Range<String.Index> of a sentence within its whitespace padding. For example,
let padded = " El águila (🦅). "
let sentenceRangeInPadded = ???
assert(padded[sentenceRangeInPadded] == "El águila (🦅).") // The test!
Here's some regex that I started with, but looks like variable length lookbehinds aren't supported.
let sentenceRangeInPadded = padded.range(of: #"(?<=^\s*).*?(?=\s*$)"#, options: .regularExpression)!
I'm not looking to extract the sentence (could just use trimmingCharacters(in:) for that), just the Range.
Thanks for reading!
You may use
#"(?s)\S(?:.*\S)?"#
See the regex demo.
Details
(?s) - a DOTALL modifier making . match any char, including line break chars
\S - the first non-whitespace char
(?:.*\S)? - an optional non-capturing group matching
.* - any 0+ chars as many as possible
\S - up to the last non-whitespace char.
I need to find the index of the first character that is not ]. Normally to match any character except X, you use the pattern [^X]. The problem is that [^]] simply closes the first bracket too early. The first part, [^], will match any character.
In the documentation for the LIKE operator, if you scroll down to the section "Using Wildcard Characters As Literals" it shows a table of methods to indicated literal characters like [ and ] inside a pattern. It makes no mention of using [ or ] inside double brackets. If the pattern is being used with the LIKE operator, you would use the ESCAPE clause. LIKE doesn't return an index and PATINDEX doesn't seem to have a parameter for an escape clause.
Is there no way to do this?
(This may seem arbitrary. To put some context around it, I need to match ] immediately followed by a character that is not ] in order to locate the end of a quoted identifier. ]] is the only character escape inside a quoted identifier.)
This isn't possible. The Connect item PATINDEX Missing ESCAPE Clause is closed as won't fix.
I'd probably use CLR and regular expressions.
A simple implementation might be
using System.Data.SqlTypes;
using System.Text.RegularExpressions;
public partial class UserDefinedFunctions
{
[Microsoft.SqlServer.Server.SqlFunction]
public static SqlInt32 PatIndexCLR(SqlString pattern, SqlString expression)
{
if (pattern.IsNull || expression.IsNull)
return new SqlInt32();
Match match = Regex.Match(expression.ToString(), pattern.ToString());
if (match.Success)
{
return new SqlInt32(match.Index + 1);
}
else
{
return new SqlInt32(0);
}
}
}
With example usage
SELECT [dbo].[PatIndexCLR] ( N'[^]]', N']]]]]]]]ABC[DEF');
If that is not an option a possible flaky workaround might be to substitute a character unlikely to be in the data without this special significance in the grammar.
WITH T(Value) AS
(
SELECT ']]]]]]]]ABC[DEF'
)
SELECT PATINDEX('%[^' + char(7) + ']%', REPLACE(Value,']', char(7)))
FROM T
(Returns 9)
I have some java code declaring a 2d array that I want to flip.
Content is like:
zData[0][0] = 198;
zData[0][1] = 198;
zData[0][2] = 198;
...
And I want to flip indices to have
zData[0][0] = 198;
zData[1][0] = 198;
zData[2][0] = 198;
So I tried doing it with sed:
sed -r 's#zData[([0-9]*)][([0-9]*)]#zData[\2][\1]#g' DataSample1.java
But unfortunately sed says:
sed: -e expression #1, char 43: Unmatched ) or \)
Might the string "zData" hold kind of flag or option?
I tried not using the -r option but I have the same kind of message for:
sed 's#zData[\(\[\0\-\9\]\*\)][\(\[\0\-\9\]\*\)]#zData[\2][\1]#g' DataSample1.java
Thanks for your help
Simples:
$ sed -r 's/(zData)(\[[^]]+])(\[[^]]+])/\1\3\2/' file
zData[0][0] = 198;
zData[1][0] = 198;
zData[2][0] = 198;
Regexplanation:
# Match
(zData) # Capture the variable name we want to transpose
( # Start capture group for first index
\[ # Opening bracket escaped to mean literal [
[^]]+ # One or more none ] characters i.e the digits
] # The closing literal ] doesn't need escaping here.
) # Close the capture
(\[[^]]+]) # Same regexp as before for the second index
# Replace
\1\3\2 # Switch the indexes but rearranging the 2nd and 3rd capture groups
Note: Switch \[[^]]+] to if it is clearer \[[0-9]+] for you, so instead of saying match an opening square bracket followed by one or more none-closing brackets followed by a closing bracket you are saying match an opening square bracket followed by one or more digit followed by a closing bracket.
Try that one:
sed 's#\([a-zA-Z0-9_-]\+\)\(\[[^]]*\]\)\(\[[^]*]\]\)\(.*$\)#\1\3\2\4#'
It adds four captures for the variable name, the first index, the second index and the rest and then switches order.
Edit: #Sudo_O's solution with extended regular expressions is much more readable. Thx for that! Nevertheless, on some systems sed -r may not be available, since it is not part of basic POSIX.