Checking out a maven project from a git repository - eclipse

I have installed m2eclipse and EGit, I can checkout a project from a git repository and I can build a maven project, but I cannot checkout a maven project from the git repository.
The problem is, that the SCM URL field is empty (apart from EGit I have SVN team providers as well...) and when I paste the url I just get SCM provider is not available in the maven console.
I tried searching for this issue and I found I have to install m2eclipse SCM integration and SCM handler for git, however those aren't on the update sites.
Any ideas?


Maven SCM integration in Eclipse used to be good. It used to be that you could do Import > Check out Maven projects from SCM and put in a URL like scm:git:ssh://git#git:project.git but in Helios or the new version of m2eclipse + extras you can't do that anymore. It always gives the error that the original post is talking about. Disappointing that you have to check out in EGit and then add dependency management. This isn't a great solution because it isn't smooth with parent / children POMs.


Ok, so now it works. First clone the repository with EGit, then create generic project, then add dependency management and everything installs just fine and works.


If I understand your saying, I can do what you need in this way. Just place this in the projects' pom.xml:
<scm>
<connection>scm:git:https://gitUsername#github.com/gitRepo/projectname.git</connection>
<url>scm:git:https://gitUsername#github.com/gitRepo/projectname.git.git</url>
<developerConnection>scm:git:https://gitUsername#github.com/gitRepo/projectname.git.git</developerConnection>
</scm>
A git project is not checked out, it's cloned.
To clone the project just type
git clone <project url>


I found a partial solution to my problem. I use Apache Ivy (IvyDE, plugin for Eclipse) instead and the thing I want to checkout is in the default dependency repository.

Related

How to upload my local maven projects into Github

I have searched a lot for this question, while most of the questions & answers are just for the simple maven projects, while for me, there are different folders in my maven project.
Please take a look of my project structure.
project structure
Now I have a project, a parent maven project, a common maven project and a manager maven project.
"common" and "manager" are depending on parent and under "manager", there are five maven models, "dao" is depending on "pojo", "interface" is depending on "dao", "service" id depending on "interface" and "pojo", "web" is depending on "service".
I am quite struggled for uploading my project into GitHub. Most of the answers I've searched is for single and simple maven projects uploading to GitHub.
I am using eclipse mars 2.
Can anyone do me a favor?
I am quite thanks.

If the EGit tutorial if not enough, consider the command line, for uploading all your maven modules into one GitHub repo:
cd /path/to/your/main/pom.xml/folder
git init .
git add .
git commit -m "maven project"
git remote add origin https://github.com/<me>/<myrepo>
git push -u origin master
Then in Eclipse, a simple Team/Share will allow Eclipse to recognize your Git repo.

SVN Checkout of multi module maven project causing build issues

I am trying to learn how to setup multi-module maven project and share it with colleagues using SVN.
We work with eclipse IDE.
Here is how my project structure looks in SVN.
Each module has its own svn labels and tag trunk, branches, tags etc.
I check out all the modules individually by right clicking on them and choosing check out.
Finally I get the below in my eclipse project explorer:
Here is my pom for the parent project. and this throws errors when I do a mvn clean install
I want to understand how to checkout the projects/ modify my pom to get the build successful.
Thanks

You don't want to check out the root folders of your modules in SVN. All you want is the content of the trunk. So right click on the trunk folder and select Check out as.... Check it out as new projects and enable Maven on those project afterwards. Do this with each of your modules and you should be fine.
If you have Maven SVN connectors installed you have an option called Check out as Maven project. This is very comfortable as it does a few steps for you.

Maven dependency in Local Repository but not being picked up

The dependency I'm using is for Oracle which, reading from another post, is not included in the default maven repo due to legal issues. For this reason I've added the dependency to my local repo using:
mvn install:install-file -Dfile=/home/<myname>/development/Libraries/ojdbc6.jar
-DgroupId=com.oracle -DartifactId=ojdbc6 -Dversion=11.2.0.3 -Dpackaging=jar
My problem is that maven is attempting to pull the file from the default remote repo and failing although it was my understanding that the local repo is checked first.
My install of maven is the default version packaged with STS (basically Eclipse).
Kind Regards,
Justin

Checking whether the jar got properly installed in your local repository might help. If you navigate to the .m2/repository/com/oracle/ojdbc6/11.2.03/ you should find the jar present there.

if this problem is present, i can suggest you to select the Offline option on maven uptade project. Whith this option enabled, the maven install search for local repository.

Importing a Maven project into Eclipse from Git

How can I get the effect of choosing to import from both Maven and Git and have Eclipse properly generate my project?
To get my project into Eclipse I can choose File->import->maven and then I get all the Maven projects imported and can build fine, or I can choose File->import->git and make a new project that ignores the pom.xml and does not generate the project properly.
It seems I can do one or the other but not combine both so I get a correctly generated project.

Eclipse Indigo + M2Eclipse 1.0 makes it very easy.
If you don't already have the Git connector for M2Eclipse install it. M2Eclipse will help you along by prompting you on the Import menu.
Select the "Import..." context menu from the Package Explorer view
Select "Check out Maven projects from SCM" option under the Maven category
On the window that is presented choose the link "Find more SCM connectors in the m2e Marketplace
Find connector for Git...install...restart
Note that in the search box you may have to enter "EGit" instead of "Git" to find the right connector.
With that done, simply go to the EGit repository, bring up the context menu for the Working directory and select "Import Maven projects...".
Done!

I would perform a git clone via the command line (outside Eclipse) then use File -> Import... -> Existing Maven Projects.
Your projects will be understood as using Git and Maven. It's the fastest and most reliable way to import IMO.

Step 1 : Setting Up Eclipse
First of all you'll need to have a few Eclipse plug-ins installed. So use eclipse IDE software install feature in the help dropdown menu → Install new software, and add link to Available Software Site, then install it.
GIT plugin (EGIT)- http://download.eclipse.org/egit/updates
Eclipse Maven plugin (M2Eclipse) - http://download.eclipse.org/technology/m2e/releases
Maven SCM Handler for EGit (m2e-egit)
Install from the M2E Marketplace (Settings → Maven → Discovery → Open Catalog and search for " m2e-egit")
Step 2 : Clone the repository
Clone(download) your Maven Projects from Git
Check out non-eclipse Maven Projects from Git (File → Import.. → Maven → Check out Maven Projects from SCM)
Now add your git repository link to SCM URI field.Then click next & finish.

As of this (updated) writing, a working setup is the following:
Eclipse 3.8 (Eclipse Indigo update site)
EGit 1.3.0 (Eclipse Indigo update site)
m2e 1.0.200 (Eclipse Indigo update site)
m2e-egit 0.14.0 (m2e marketplace when adding a connector)
Tested on Ubuntu Raring.
You can certainly "Import" -> "Maven" -> "Check out Maven Projects from SCM", and this is the quickest way. However, such direct import currently does not give you control over the cloned repository folder name. You may be better off working from the "Git Repository" View and perform either a "Clone from a Git Repository and add the clone to this view", followed by an "Import Maven Projects" from such clone; the longest way would be to do your manual cloning and then "Add an existing local Git Repository to this view", followed again by an "Import Maven Projects". Either case you have full control on the cloned folder.
A final comment on a side issue that made me cry in frustration. As far as I know, if the cloned repository lies on the root of your Eclipse workspace, and your Maven project file hierarchy has a POM on its root, then importing such root project will rename the cloned folder (with the template you chose, defaults to [artifactId]). Without changing your project structure and without keeping files outside your workspace, you can easily work around this issue by cloning on a subsubfolder of the workspace folder.

I have been testing this out for my project.
Eclispe Indigo
"Help > Install New Software" Enable/Install official Git plug-ins at "Eclipse Git Plugin .." and install the lot.
Enable the Maven/EGit connector with these instructions How do you get git integration working with m2eclipse?
Switch to the Git Repository perspective. Right click paste the project git url. The defaults should all work. You may want to change the install folder it guesses.
Expand the cloned repository and right click on "Working Tree" and pick "Import Maven Projects...".
Switch to the Java perspective. Right click on the project and choose "Team > Share Project". Select "Git" and be sure to tick the box "Use or create repository in parent folder of project".

Here's my workaround, this is a solution to these issues:
You can't install m2e-egit (I get an error in Juno)
Converting a general project (connected to your Git repository) to a Maven project isn't working for you (The Import Maven Projects step seems essential)
Importing Maven Projects from your repository on the filesystem isn't showing the project connected to Git.
Setup your Git repository in the Git Repository Exploring perspective.
Switch to the Java perspective, Import > Existing Maven Projects
Browse to your Git checkout in the filesystem, select the directory containing the pom.xml file. Finish the import;
you'll notice these projects aren't connected to Git. :-(
Delete these projects, but DO NOT DELETE FROM FILESYSTEM.
We don't want our clone deleted; this task also leaves the .project file behind so that we can import in the next step.
Go back to the Git Repository Exploring perspective.
Right-click your repository, Import Projects...
Select Import existing projects
In the explorer below, browse to and select the directory containing the pom.xml (and .project file) , then click next.
Continue through the wizard.

Import without installing any additional connectors for Mylyn:
Open Git Repositories view (Window->Show view->Git Repositories)
Press Clone a Git Repository button and proceed with all steps
In newly created repository expand Working Directory, right click on folder with your project and select Import Projects. Then either choose Import existing projects, or select Import as general project. If needed after importing right click on your project and select Configure->Convert to Maven Project (and Maven->Update Project).

You should note that putting generated metadata under version control (let it be git or any other scm), is not a very good idea if there are more than one developer working on the codebase. Two developers may have a totally different project or classpath setup. Just as a heads up in case you intends to share the code at some time...

I have a maven project with three submodules that is managed in git. I set them up in eclipse as follows:
I registered the git repository with eclipse using EGit
I imported the projects as existing Maven Projects
For each project, I went Team | Share Project.

Direct answer: Go to Files>>Import>>Git>>Project From Git (you should have GIT installed on Eclips)

I would prefer to import projects into Eclipse as maven projects rather than git project. Doing this will still allow the project contents to be recognized as git contents. You can continue to perform git operations from Eclipse. As you have mentioned the reverse is not true.
The nature of a project in Eclipse is not based on the SCM which holds the project, but on the type of project - whether war or jar, etc. - which is automagically determined when the project is imported as maven project.
I would be hesitant to check-in to SCM IDE-specific metadata. Doing so assumes a lot of things - all developers are using the same IDE or version of the IDE, perhaps same version of JDK/JRE, that they continue to use the same version throughout the project lifecycle and so on.

Can't you import it as a git project and then (if you have the m2eclipse installed) right click on the project in the Package Explorer > Maven > Enable Dependency Management?

After checking out my branch in Egit, I switched to the Java View, then used File-->Import, Git-->Projects from Git, then selected the top level maven directory. This was with Eclipse Kepler.

Instead of constantly generating project metadata via import->maven command, you can generate your project metadata once and the place it in your git repository along with the rest of your source code. After than, using import->git command will import a proper maven-enabled project, assuming you have maven tools installed.
Make sure to place into the source control system all files in project dir that start with '.' such as .classpath and .project along with the entire contents of the .settings directory.

Does m2eclipse need EGit for git support

Does m2eclipse use EGit for git support or does it just use the native git client installed on a machine?
I have both installed (plus the m2eclipse SCM integration plugin) and I was wondering if I still need EGit if I use m2eclipse's git support.

If you have installed Maven SCM feature, you should be able to checkout projects from Git using Maven SCM provider for Git. This should work for "Checkout projects from SCM" wizard, assuming you know a correct project url to checkout.

m2eclipse has no idea of git, so it needs a plugin which supports git (currently only EGit).
Inside the POM, the situation is different: Here, the Maven plugin (and not the one from Eclipse) is loaded. This SCM maven plugin uses the command line interface of the git client on the machine.