I have a Zabbix server 2.2 and a few linux hosts with websites. How can I get a notification from Zabbix, if the HTTP(s) response code is not 200?
I've tried those triggers without any success:
{owncloud:web.test.rspcode[Availability of owncloud,owncloud availability].last(,10)}#200
{owncloud:web.test.error[Availability of owncloud].count(10,200)}<1
{owncloud:web.test.error[Availability of owncloud].last(#1,10)}=200
But nothing works. I never got an notification, that the code is not 200 anymore even it was 404, because I have renamed the index.php of owncloud to index2.php
I configured the Application and the we the Web Scenario as followed:
if you have already configured the host go to step 1
1) Select the host by Configuration-> Host groups -> select host (example server 1)
2) Go to Config > Hosts > [Host Created Above] > Applications and click on Create Application
3) Now you have to create the Web scenario with the status code check, in my case I checked status code 200. So go to Configuration > Hosts > [Host Created Above] > Web Scenarios and click on Create Web Scenario .
Remark: you have to select the previous application created at the step 2
4) After that without click on Add button go to Steps window and you have to configure the host and parameters for the chek. After that click on Add. In my cas e check the status code 200 response for the HTTP request.
I found the issue. You need to specify the URL to check with file. For example like this in your web scenario:
https://owncloud.example.com/index.php
"Note that Zabbix frontend uses JavaScript redirect when logging in, thus first we must log in, and only in further steps we may check for logged-in features. Additionally, the login step must use full URL to index.php file." - https://www.zabbix.com/documentation/2.4/manual/web_monitoring/example
I also used following expression as trigger:
{owncloud:web.test.fail[Availability of owncloud].last()}>0
you have set a triggers bye Expression
{host name:web.test.rspcode[Scenario name,Steps name].last()}=200
The question has been answered adequately, but I will provide a very much more advanced solution that you could use for all HTTP status codes.
I've created an item that monitors all HTTP status codes of a proxy, graphs them, and then set up multiple different types of triggers to watch last value and counts in last N minutes.
The regex I used to extract all the values from a Nginx or Apache access log is
^(\S+) (\S+) (\S+) \[([\w:\/]+\s[+\-]\d{4})\] \"(\S+)\s?(\S+)?\s?(\S+)?\" (\d{3}|-) (\d+|-)\s?\"?([^\"]*)\"?\s?\"?([^\"]*)\"?\s
I then set many triggers relevant for my particular situation
101 Switching Protocols
301 Moved Permanently
302 Redirect
304 not modified
400 Bad Request
401 Unauthorised
403 Forbidden
404 Not found
500 Server Error
It's also important that your Zabbix agent has permissions to read the log file on the host. You can add the zabbix-agent to the www-data group using this command.
$ sudo usermod -a -G www-data Zabbix
See the tutorial for all the steps in greater detail.
when I am starting WebLogic admin server with local host:port no/console I am getting the following error:
Console/Management requests or requests with <require-admin-traffic> specified to 'true' can only be made through an administration channel.
How to overcome this error?
You can manualy change your config.xml, find the <require-admin-traffic> element and change it's value to false.
This is because the option administration-port-enabled is set to true in config.xml
(available under ../MW_HOME/user_projects/domains/config)
<administration-port-enabled>false</administration-port-enabled>
Perfect. Or you can use the administration port you entered when configuring the server to use the admin server, which will be different from the default one. The default one 7001, the default for the admin server is 9002 and you can only access it via https.
Not downvoting the answer as it is accepted and maybe useful for users which can't recover their admin port, but this is obviously not best practise.
Once you open config.xml under the folder ../config,
change this row from 'true' to 'false':
true
It should then be ok.
Skender Kollcaku
You are most probably trying to use the administration console on the application port. You need the administration port.
Go to your domain directories (ex. /opt/weblogic/domains/mydomain)
Go into sub-directory config
Run grep "administration-port" config.xml
This will give you a port number, like: <administration-port>12345</administration-port>
Use that port to connect to /console/.
ex: https://YOUR-SERVER:12345/console/
This is much preferable to using the application port for the console, like #Peter pointed out.
my update site is only via ftp reachable and the customer needs to set a proxy. But i can't select a FTP-Proxy in the preference page (General -> Network Connections). How can i add the ftp schema? There are no buttons like 'add proxy'
Try setting 'Active Provider' on top of the General -> Network Connections page to 'Manual' - you will then be able to edit individual proxy schemas.
Just wanted to know if there is any way I could develop Facebook applications in localhost.
Edit: 2-15-2012 This is how to use FB authentication for a localhost website.
I find it more scalable and convenient to set up a second Facebook app. If I'm building MyApp, then I'll make a second one called MyApp-dev.
Create a new app at https://developers.facebook.com/apps
(New 2/15/2012) Click the Website checkbox under 'Select how your application integrates with Facebook'
(In the recent Facebook version you can find this under Settings > Basic > Add Platform - Then select website)
Set the Site URL field (NOT the App Domains field) to http://www.localhost:3000 (this address is for Ruby on Rails, change as needed)
In your application initializer, put in code to detect the environment
Sample Rails 3 code
if Rails.env == 'development' || Rails.env == 'test'
Rails.application.config.middleware.use OmniAuth::Builder do
provider :facebook, 'DEV_APP_ID', 'DEV_APP_SECRET'
end
else
# Production
Rails.application.config.middleware.use OmniAuth::Builder do
provider :facebook, 'PRODUCTION_APP_ID', 'PRODUCTION_APP_SECRET'
end
end
I prefer this method because once it's set up, coworkers and other machines don't have additional setup.
Of course you can, just add the url localhost (without "http") in your app_domain and then add in your site_url http://localhost (with http)
Update
Facebook change the things a little now, just go to the app settings and in the site url just add http: //localhost and leave the App Domain empty
Here is my config and it works fine for PHP API:
app domain
http://localhost
Site URL
http://localhost:8082/
NOTE: As of 2012 Facebook allows registration of "localhost" as return Url. You still may need similar workaround for other providers (i.e. Microsoft one).
If you need real domain name registered with Facebook (like my.really.own.domain.com) you can locally redirect requests to this domain to your machine. Easiest out of box approach on any OS is to change "hosts" file to map the domain to 127.0.0.1 (see http://technet.microsoft.com/en-us/library/bb727005.aspx#EDAA and https://serverfault.com/questions/118290/cname-record-alias-in-windows-hosts-file).
I usually use Fiddler to do it for me (on Windows with local IIS) - see samples on http://www.fiddler2.com/Fiddler/Dev/ScriptSamples.asp.
if (oSession.HostnameIs("my.really.own.domain.com")) {
oSession.host="localhost:80";
}
Hosts file approach of approaches does not work with Visual Studio Development Server as it requires incoming Urls to be localhost/127.0.0.1. If you need to work with it (or possibly with IIS express) to override host - Using Fiddler with IIS7 Express
Facebook no longer allowed a 'localhost' callback URL for FBML Facebook applications
With the new development center it is now easier:
1) Leave app domains blank.
2) Click Add Platform
3) Site URL should equal the full path of your local host.
4) Save Changes
I just discovered a workaround: You can make your local machine accessible by using http://localtunnel.com . You'll need to (temporarily) change some URLs used in your app code / html so links point to the temporary domain, but at least facebook can reach your machine.
In your app's basic settings (https://developers.facebook.com/apps)
under Settings->Basic->Select how your app integrates with Facebook...
Use "Site URL:" and "Mobile Site URL:" to hold your production and development URLs respectively. Both sites will be allowed to authenticate. I'm just using Facebook for authentication so I don't need any of the mobile site redirection features. I usually change the "Mobile Site URL:" to my "localhost:12345" site while I'm testing the authentication, and then set it back to normal when I'm done.
You have to choose Facebook product 'facebook login' and enable
Client OAuth Login , 'Web OAuth Login' and 'Embedded Browser OAuth Login'
then even if you give localhost url It will work
There is ! My solution works when you create an app, but you want to use facebook authentification on your website. This solution below is NOT needed when you want to create an app integrated to FB page.
The thing is that you can't put "localhost" as a domain in the facebook configuration page of your app. Security reasons ?
You need to go to your host file, in OSX / Linux etc/hosts and add the following line :
127.0.0.1 dev.yourdomain.com
The domain you put whatever you want. One mistake is to add this line :
localhost dev.yourdomain.com (at least on osx snow leopard in doesnt work).
Then you have to clear your dns cache. On OSX : type dscacheutil -flushcache in the terminal.
Finally, go back to the online facebook developer website, and in the configuration page of your app, you can add the domain "dev.yourdomain.com".
If you use a program such as Mamp, Easyphp or whatever, make sure the port for Apache is 80.
This solution should work for Windows because it also has a hosts file. Nevertheless, as far as I remember Windows 7 doesnt use this file anymore, but this trick should work if you find a way to force windows to use a hosts file.
this works June 2018, even after the HTTPS requirement. It appears a test app does not require https:
create a test app:
https://developers.facebook.com/docs/apps/test-apps/
then within the test app, follow the simple steps in this video:
https://www.youtube.com/watch?v=7DuRvf7Jtkg
I think you should be able to develop applications using the visual studio development web server: Start a new FaceBook application on: http://www.facebook.com/developers/. Then set the settings for the site Url and the canvas url to the running instance of your website for example:http://localhost:1062/
Here are a couple of links that should help you out on starting with FaceBook:
http://thinkdiff.net/facebook/graph-api-iframe-base-facebook-application-development/,
http://nagbaba.blogspot.com/2010/05/experiencing-facebook-javascript-sdk.html,
http://apps.facebook.com/thinkdiffdemo/
Hope this helps.
Try this ---
https://www.facebook.com/help/community/question/?id=589302607826562
1 - Click Apps and then select your app.
2 - Click the Settings button on the left side of the screen.
3 - In the Basic settings, click the Add Platform button below the
settings configuration.
4 - Select Website in the platform dialog.
5 - Enter your URL (localhost works here).
6 - In the App Domains text input, add your domain that matches the one in the URL.
7 - Save your settings.
Suppose that you have registered your app as:
app.domain.com
You just need to modify the /etc/hosts file by adding
127.0.0.1 dev01.app.domain.com
Then, modify your apache configuration
ServerName dev01.app.domain.com
and restart apache.
You'll need to put your URL in a variable in order to use it as XML parameter on some calls:
<fb:login-button registration-url="http://<?=$URL?>/register" />
Don't have enough cred to comment on the top voted answer, but at least in my rails environment (running 4), rails s is at http://localhost:3000, not http://www.localhost:3000. When I changed it to http://localhost:3000, it worked just fine. No need to edit any hosts file.
app domain : localhost
site URL : http://localhost:4440/
worked for me with the new UI.
Latest update:
You don't have to give any urls if you are testing it in development. You can leave the fields empty. Make sure your app is in development mode. If not turn off status from live.
No need to provide site url, app domains or valid redirect oauth uri.
My Solution works fine in localhost.....
For Site URLS use http://localhost/
and for App domains use localhost/folder_name
Rest everything is same .......it works fine
(though its shows redflag in App Domain..App is working fine)
It's easy go to the app dashboard under the facebook login tab click settings
then select Enforce HTTPs No, save settings
The application will run just fine in localhost: 3000, you just need to specify the https address on which the application will be live when it be in production mode.
Option 2 is provide the url or you heroku website which lets you have sample application in production mode.
I have setup TYPO3 successfully on my local server. But I am having problem when clicking on any menu item: It's showing "url not found on server".
When I type in the URL manually into the browser it shows the page. It's only having problems when redirecting after clicking on a page item at any frontend website page.
That might be related to the domain config or RealURL... or both ;)
Do you use RealURL? Or do you use the standard url config?
If links to sub pages look like index.php?id=12345 you are using the standard config.
My guess is that the local DNS ("hosts file") is not configured correctly.
With the hosts file you can simulate how the web site will appear when it's online, hooked up to a "real/global" DNS. (Not quite, but in a nutshell)
So if you set up Typo3 to be reached under http://www.example.com/ you need to tell your local DNS ("hosts file") to route a request to http://www.example.com/ to your local host e.g. http://127.0.0.1/ . In that case your host file needs an entry like so:
127.0.0.1 http://www.example.com/
What Domain do you enter to reach your web site? Where do the links from the menu link to?
If you wanna know mor about the "hosts file" look here:
http://accs-net.com/hosts/how_to_use_hosts.html
If you can log in into the TYPO3 backend (/typo3/) and can access the frondend through /index.php, but not through the generated menu links, then RewriteRules for mod_rewrite don't apply.
Usually TYPO3's installer should detect this configuration and disable RealURL, which is responsible for generating such nice looking URLs (instead of index.php?id=123). It seems like this failed (or you copied everything afterwards without the .htaccess file?).
Make sure that you have TYPO3's .htaccess file in place in the root directory of your installation. If this is the case, make sure that mod_rewrite is enabled in your Apache config.