How & where to change fix upload permitions for joomla.
After installation of the plugin or module, i have no rights to edit file/directory.
thnx
You need to either enable the FTP layer and put in your username and password so that Joomla can create new directories with the proper permissions or you need to get a host that runs PHP as a CGI. The latter is preferable as the FTP layer is considered a security risk.
By default, Joomla will try to fix the permissions of files and directories during the install process, but it is not always successful depending on the server configuration. One of these 2 methods should fix your issue with future installs.
Related
I am newbie to TYPO3 and having a situation where I have to setup an existing TYPO3 website in my local machine so, I can make changes in some pages but the problem is that I don't have any experience with TYPO3.
What I have:
I have FTP access to the development server but don't know which folders/files are required to make it work in the local machine.
What I have tried:
I had searched regarding this on the internet and also read some past StackOverflow questions but don't find any positive response.
If someone can guide me through then it would be very helpful... Thanks!
first: you need a webserver running PHP and a database (probably mySQL).
This should match the running server.
You might use DDEV to put it all into a virtual machine and get a better match, but any webserver with PHP and mysql should do.
TYPO3 can be running in two ways:
composer mode
non composer mode
if it runs in composer mode you also need composer (and git) installed. But the copy is easier as you only need to copy the composer.lock-file and do an composer install to copy all code.
additional you need to copy all data.
that is the database.
the whole folder /fileadmin (based in webroot)
in non-composer mode you need to:
install the same TYPO3 version (typical somewhere with a symlink /typo3/ -> your location/ in the webroot.
then look for /index.php on the original server and copy it (it could be a symlink)
additional you need to copy the folder /typo3conf from the server.
and of course the data as above
then you might need to adapt /typo3conf/LocalConfiguration.php and /typo3conf/AddionalConfiguration.php. (database credentials/ domain specific info/ ...)
since TYPO3 9 you probably have a yaml config file outside the webroot.
Our app is being stored in /Users/Shared/OurAppData/OurApp.app.
One of the reasons for this is to enforce user to use launcher.
But, now we've met the problem, when we want to update our app through the launcher(we download zip file, extract that and that wants to replace our app with the new one with)
try FileManager.default.replaceItemAt(URL(fileURLWithPath : Paths.ourAppPath) , withItemAt: extractedURL)
"You don’t have permission to save the file “OurApp” in the folder “ OurApp Data”."
My question is - is there a way to handle that situation?
I guess the best solution to promt user for login and password for permissions, and to replace that file? I guess this is something outside the Swift scope, and probably AppleScript, or even .sh.
Please, help.
Thanks
I recommend to have a look at the Sparkle framework for updating applications.
Sparkle handles the checking if an update is available, downloading the update, asking for an administrator password if required, and cleaning up the downloaded files after the update.
For most application it is enough to just have the new version archived as zip archive.
But it is also possible to update application with helper applications or agents which are outside of the main application bundle.
This can be done with installer package *.pkg. If you are familiar with Sparkle, the "Automatic installation" referred here will only show the Sparkle UI. In the background it will use macOS’s built-in command line installer, /usr/sbin/installer.
In most cases it will make sense to have the same .pkg as user facing installer and update, it is not required.
If your application is sandbox, there are a couple of forks of the framework.
i know that the default profile name when i installed websphere was Appsrv01, I want to create my own AppSrv02 but the location of my IBM Websphere was in C: and i dont have any write permission, i dont have any admin rights also..
using COMMAND-LINE, I want to make my profile folder to be writable, so that my newly created AppSrv02 will be list down in the profile names in my RAD.
Please help me. Thanks
So that's your problem. In order to have a usable profile in WAS, your user must have write permissions. See this link from WAS ND infocenter, it applies to WAS standalone too.
http://www.ibm.com/support/knowledgecenter/SSAW57_8.5.5/com.ibm.websphere.installation.nd.doc/ae/tpro_manage_nonroot.html
If you cannot change the write permissions to this profile, you'll need to create your own. For this, you can either use WAS Profile Management Tool, WAS CLI or you can create your profile using the Configure profiles... link in the WAS server creation wizard you posted. I'd use the RAD way because RAD validates, within the IDE, the proper permissions that you need to create and use the profile within RAD.
First check whether you have admin rights or not if your using User/Guest profile, by creating any new folder in C drive where IBM WAS is installed.
If you have Admin rights, than right click on RAD run as administrator. It should work fine.
If Profile doesnt show up in drop down, Configure new profile and try checking that way.
If you dont have Admin rights better install RAD in any local drive other than C
Running Eclipse with Admin rights and removing the read-only tick for the AppServXX folder/WAS folder couldn't help me... cause I copied the WAS server from another PC :). So for those of you who want to move / migrate your development environment:
I did a search inside the copied WAS, Eclipse and the project's workspace folder for their old paths (with Total Commander, feed the results into a list) and dragged all the files (except the log ones) into my editor (NotePad++) and did a replace in all open documents for the new paths. It's a bit lucrative, but it took only 10 minutes for me and afterwards the WAS server in Eclipse showed the correct profile and it also did start up well.
I am new to Modx. I successfully installed and set up Modx on my laptop on localhost using xampp. However I would like to work on Modx on my desktop. I have copied over the htdocs onto my desktop. And have set up my database identically. When accessing Modx Manager, my username and password is said to be incorrect. I am using the same username and password and it works on my laptop (I have checked for typos). I do not understand why I am unable to log in. Can someone guide me so I can successfully work on my Modx on my desktop computer?
Often a stale session from your browser can prevent login. Try logging in from an incognito window.
Also, did you ensure that the MODX install on your desktop has the correct paths in config.core.php files? There's one in your document root, one in your manager folder, and one in your connectors folder.
Furthermore the paths and DB connection info need to be environment specific, in {core_path}/config/{config_key}.inc.php
When you migrated the site to your desktop, did you run the setup program again? Often that helps to fix paths, but you need to normalize the config.inc.php file first.
If you can access the database directly, you can change the hash_class value for your user in the modx_users table to hashing.modMD5 temporarily so that you can manually enter an MD5-hashed password. Maybe there's an issue with the PBKDF2 on your desktop local environment.
Some ideas to try, anyways.
When I started my current job, I was told to install the Subversive plugin for Eclipse, and given the URL of the repository to pull projects down from. My username and password were/are the same as my Active Directory credentials. So I installed the plugin, created a new repository (don't remember how, but it was easy to do), and have never looked back.
I am now being transitioned to a different team, who also use SVN for source control, but have it set up on a completely different server. I was asked to put in a ticket with the systems people to request access to this SVN server so I could access this other team's code.
The systems person assigned to my ticket just sent me the following email:
Attached are the pkcs12 files that are needed for your access to SVN on [svn.someserver.com]. You’ll need to put these files on your local systems and then add the following configuration to the ~/.subversion/servers file, for your SVN client. I just use the svn command on linux, so my home directory contains the .subversion directory and the servers file is in that directory. I will send your password separately.
Note: I have a Windows machine, so a part of my confusion may stem from the fact that the tech is on Linux and I am on Windows 7.
The attachment was a ZIP file that extracted two separate files:
foo.pem - a PEM file (?)
atannon - a "Personal Information Exchange" file (?); same as my username
The tech followed up with an email giving me my password in cleartext.
I checked my home directory and do not see a .subversion or .svn hidden directory anywhere. I am wondering if I need to follow his directions, but using my Program Files/eclipse/ directory instead.
So I have several questions here, all relating to how to configure SVN access in the manner prescribed by this systems tech:
Why was it so easy for me to get set up with the first SVN server when I started my job (just install the plugin and find the repo through Eclipse's Repo Explorer), and why does this server require so much configuration? I assume there are multiple methods for gaining access to a SVN server, and this 2nd team just uses a more lengthy setup method?
Can someone give me a super-quick rundown of what each of these files are and what purpose they serve? And why I need to install them locally on my system?
Where should I install these files? The tech wanted me to put them in my ~/.subversion directory, but I never created one because they only SVN client I ever installed was Subversive (through Eclipse)
I tried creating a new repository for [svn.someserver.com] in Eclipse. I supplied my username and the cleartext password the tech sent me and now it is giving me a dialog stating I need to "Provide authentication information", asking for SSL settings, and specifically a File and a Passphrase for the Client Certificate...would the files he sent me suffice for this? If so, perhaps the answer to my question above just requires knowing which files to point Eclipse to, and I don't have to install these files anywhere
I usually don't like to ask multiple questions inside of one giant question, but these are all so similatrly in nature, I didn't want to clutter SO with too many closely-related questionss.
Thanks in advance for any help here!
Why was it so easy for me to get set up with the first SVN server when I started my job (just install the plugin and find the repo through Eclipse's Repo Explorer), and why does this server require so much configuration?
First server have less paranoid (if have any at all) security settings, second was configured by Real Admin. Client-certificate authorization is most bullet-proof method
Can someone give me a super-quick rundown of what each of these files
are and what purpose they serve? And why I need to install them
locally on my system?
foo.pem is your Personal S/MIME certificate, which used for client authentication, which you have storelocally and link with repo's server. atannon (I think) contain password for certificate privatekey, which will be asked (TBT) at first operation with repo (or with all, if you don't cache password)
Where should I install these files? The tech wanted me to put them in my ~/.subversion directory
For Windows, $HOME-dir (~ in Tux-world) is C:\Users\<Your Username>\ (Win7) or c:\Documents and Settings\<Your Username>\ (WinXP). You have to find inside this tree servers file (and remember it's location for future). In case of my XP (with TortoiseSVN only, no any Eclipse)
Directory of c:\Documents and Settings\Badger\Application Data\Subversion
30.06.2010 09:02 <DIR> auth
02.01.2012 19:11 6 712 config
30.06.2010 09:02 4 400 README.txt
30.06.2010 09:02 7 832 servers
"Provide authentication information", asking for SSL settings, and specifically a File and a Passphrase for the Client Certificate...would the files he sent me suffice for this?
Yes, pem-file is certificate in PKCS12-format, atannon (I hope) - contain password for it