I have 2 computers. when I open the project with live server on the first one it gives me this url 127.0.0.1:5500/index.html
I want to put that url on the other computer's browser but it doesn't work.
is there any solution to this?
This is what worked for me in VS Code:
1.- Go to your extensions option:
2.- Make sure you have the "Use Local Ip" option checked:
3.- Check on your terminal for your local Ip address (ipconfig on windows for example) and substitute the ip address from your live server url with you local ip:
You can try port forwarding using powershell on the hosting computer. I use wsl2 and when I want a preview on another computer I port forward using powershell
netsh interface portproxy add v4tov4 listenport=xxxx listenaddress=(host pc ip address) connectport=yyyy connectaddress=(wsl2 ip address)
In your case try making the listenaddress and connectaddress the same (which is your main pc) and the listen and connect ports 5500 using the above script.
After that the last step you should perform is add Inbound Rules inside your firewall.
you can go to settings live server and check the use local ip option, then you stop live server and start over again.
Now live server use an direction with local ip and you can open your file in other pc.
enter image description here
It doesn't work because you are using loopback address (127.0.0.1), in order to access your live server on entire LAN you need to change this address in vscode/liveserver settings to your private address, it will be something like (192.168.100.XXX)
put port 5500 in firewall to access from other pc
connect pc via lan and set static ip
then call it like xxx.xxx.xxx.xxx:5500/
You need nothing extra.
Just type your local IPv4 Address which you can find in Command Prompt by typing " ipconfig ", then on another computer in browser type this IPv4:5500 and it's done.
(You must have Live Server On)
Example: 192.168.1.5:5500
This might be an easy question, but I am not familiar with these stuff.
Basically I have a server pc that I connect through my pc, and there is this webpage http://localhost:8080/. I can only access this address when I log in my server pc. Now I wanted to know how I can access this webpage in my pc (without having to remotely connect to my server pc). Any help will be appreciated.
you can access to your website (if your web server accept external requests) by type this code to your browser address bar from your pc:
<server ip>:8080
replace
<server ip>
with your server ip like this:
192.168.1.10:8080
Okay, so quick networking 101, localhost is a hostname that maps to the IP address of of 127.0.0.1 and these point to the local machine, i.e. your server.
In order to access that page within the same network, you'll need an external IP address. So say you're in the network of 192.168.1.0/24 and the server is on IP address 192.168.1.100. So in order to access your stuff from another machine, simply replace localhost with that IP and it should work. If not, you've got firewall issues, and those are another topic.
I understand that you can access your computer's local site from a mobile device running on the same network by entering your computer's IP address (with relevant local port) into the address bar. However, I often use subdomains for development. On my local I access subdomains using lvh.me. For example:
blog.lvh.me
However, this will not work for mobile because lvh.me is redirecting to the IP 127.0.0.1 .
Is there a way to access a subdomain on an IP address? Essentially, doing the same thing as the above code but allowing for a dynamic IP address depending on the IP my computer has at the time?
So, after continuing research, I found an awesome tool that allows for exactly the above functionality:
xip.io
For example, if my computer has the IP address of 124.4.1.3 and I was running a web server at blog.lvh.me, where lvh.me redirects to localhost or 127.0.0.1, I could access my computer's localhost from another device on the network using blog.124.4.1.3.xip.io
I hope that helps someone!
Sidenote: The app in question was running on a rails server and the above setup required the following setting to be added to the environments/development.rb file:
config.action_dispatch.tld_length = 5
As rails was running on port 3000, this also required a url like:
blog.124.4.1.3.xip.io:3000
I implemented a web service for an Android application. The web service is running on my local host (192.168.1.2). Using the Android emulator I succeeded to connect to web service. The I tried to connect my Android device using debugging mode to web service but it didn't work. So my question is if it is possible to connect an Android device to this web service that is running on my local host (192.168.1.2) without using a real IP ?
It's much simpler way supported by google!
Connect your phone via usb to computer and enable usb debugging
On your computer open Chrome browser and type exactly this address: chrome://inspect/#devices
Now you can link your computer port to your device port by port forwarding button. On my computer I have service on address localhost:61437 and I just linked it to device's 8081 port. Remeber to check 'Enable port forwarding' checkbox
screen from service on my computer ( localhost:61437 )
screen from my mobile browser with the same service ( localhost:8081). And that's it. Also you use this service address in your application
Did you already solve your problem? I also got a problem like you. These are the steps that I already done:
unplug lan cable or turn off any other internet connection from your pc.
connect your android mobile to your pc using usb.
turn on usb tethering
back to your pc. check your ip. mine is 192.168.42.37
check your webservice app in your pc. let's say http://192.168.42.37/webserviceapp
back to your android mobile. try this url http://192.168.42.37/webserviceapp
Now you can access your webservice app in your pc from your mobile phone.
Well your localhost is 127.0.0.1 (or ::1) and your LAN IP is 192.168.1.2. Each pc/device that are connected under your LAN could reach your webservice on IP 192.168.1.2
Your Android device must be so connected under the same LAN maybe through Wifi connection so it will be able to talk with 192.168.1.2.
If you can't connect your Android device under the same LAN eg you have just a 3g connection you need to play with your router/firewall to redirect all incoming traffic (maybe just the http traffic) from your public ip to you private ip (192.168.1.2)
Hope this help
I'll throw in my process, since nothing on SO worked for me. Here are the steps I took to connect my physical android device to the web service running on my laptop (connected to the phone) on localhost:
Enable USB debugging on your Android device
Run your web service on your machine. My web service runs on localhost, port 3000 in development: http://localhost:3000/api/...
Run ifconfig (Unix), or ipconfig (Windows)
Find your machine's inet address on your LAN interface. Mine is 10.0.0.121 for interface wlan0. Externally, it is 68.43.XX.XXX, which is not the address that you want to use.
Use the LAN IP since you are connecting to your service on LAN, otherwise you might get an econnrefused (connection refused) error due to firewall rules
Build your http URL with that IP address, and the port that your web service is running on. For me, it's http://10.0.0.121:3000/api/...
When you launch your app, you should connections to your local web service in logs, Wireshark, etc, and you should see the desired activity/data in your Android application.
I had the same issues, researched a lot then found out that you have to explicitly make changes in your firewall settings. Your firewall is blocking your code to be accessed from external source. So, all you need to do is, go to firewall settings, add port 80 (in my case since, I am using Apache http Server) for inbound and outbound. Now, you can test it on your phone's browser http://192.16..**:80/
I've done that on a Mac using GasMask and Charles Proxy Server. Your phone and your computer have to be on the same network.
say the webservice url you want to access is at http://api.xyz.com, you first use GasMask to point that url to your localhost, then use Charles to set up a proxy server. Then you go to the settings on your phone, go into Wi-Fi, long-press the network you are connected to, choose Modify Network, and enter the proxy settings Charles gave you.
In my case, nothing of these solutions works because Windows firewall blocks it, but putting a rule on the firewall hasn't effect.
The problem in my case is that my laptop is connected with Wifi and Windows had the Wifi connection like a Public network. I must to change the network connection to Private network. http://www.comofuncionatodo.net/tecnologia/informatica/como-cambiar-de-red-publica-a-red-privada-en-windows-10/
I agree with the other answers as good approaches if you don't want to expose your DEV webservice on the internet. However, it's much easier if you do just expose the webservice. There's a number of free DNS services, but I've found no-ip to be the easiest to set up. I use it for exactly the purpose that you asked about; so I can test with my DEV webservice on a real device.
If you choose to go with no-ip (I have no affiliation with that company, it's just the one I've used and am familiar with), you can get a free publicly accessible URL like http://MyExampleWebServer.no-ip-org, and no-ip has a utility you can install so even if you're behind a dynamic IP, it will always keep the correct external IP associated with that URL. If you're working from your house, then you'd just need to make sure you port forward traffic from port 80 to your internal 192.x.x.x IP address (or whatever port you use; maybe 443 for ssl).
It's as easy as that, and now you can hit that webservice from any device that can access the internet.
I haven't worked with it, but I believe dyndns also offers a similar service.
This solution is for GAE development server in Eclipse
Step 1: Get the LAN IP
Goto your Windows Command Console (Press Win+R, then type "cmd"). In the console, enter "ipconfig". You will see a list of display. Under Wireless LAN adapter Wi-Fi, get the IPv4 Address. It will be something 192.168.x.x
LAN IP : 192.168.x.x
Step 2:
Go to Eclipse, Open the Configured server
Under Properties of GAE Development Server -> Local Interface address to bind to, enter the LAN IP address, and save.
Step 3:
Now you can access the GAE server by
http://192.168.x.x:8888/
8888 - Refers to the Port Number, as mentioned in the GAE development server
In order to access local web services using their own server hosts rather than IP addresses with ports, do these following steps:
Make sure your Android device and your local machine are on the same network.
Install SquidMan on your Mac, Linux, or any other Proxy Server.
Configure the proxy server's HTTPPort (ex. 5555) and clients (ex. 192.168.0.0/24) to your own network mask, and run the proxy server.
You are either using the web services in:
a. A web browser: Configure the proxy settings of your Android device from Modify WiFi networks.
b. Android application:
Set up the Proxy for your HTTP client. If you are using Volley, check this out: Volley Behind a Proxy server.
You can now connect to it by using whatever URL you are using on your host to connect to the web service (ex. http://my-local-machine.com)
Hint: If you got 4xx response codes, make sure your web service allows connections from other non-local-hosts.
If you are referring your localhost on your system from the Android emulator then you have to use
http://10.0.2.2:8080/
Because Android emulator runs inside a Virtual Machine(QEMU) therefore here 127.0.0.1 or localhost will be emulator's own loopback address.
I want to serve a website over an open wifi connection but I do not want this wifi connection to have access to the internet. Is this possible and how would I go about doing it.
I have setup websites locally and have gotten access in the browser through localhost or the IP address but I am not sure how I would go about setting up a webserver and serving the website via wifi.
Any insight on this?
you can access your machine's localhost via any computer easily, as long as that computer is connected to the said wifi.
get your computer name, and access it from other machine like this:
http://<your_computer_name_here:port_if_applicable>/website_folder_name
I do this to test my websites on mac and windows at home. My windows machine is called "The-Genius" and I access it via my mac like this:
http://The-Genius/Test/
which leads to the IIS.. if I want to access Apache, which is on port 78, I do this:
http://The-Genius:78/Test/
Hope it helps..
If you are using a wifi router, you don't have to do anything to get this to work. Whenever a client connects over wifi, they will be able to type in your webserver's IP address to see the website. If you want to use a DNS name then you might be able to set up the DNS names on the router itself.
Based on #LocustHorde's answer,
I tired the pc's IP address instead of using the pc name.
This worked fine for me...
http://172.168.1.21:8080/test/aa.php