The main page of my mobile web app is a .jsp page. My app requires login (Google App Engine), so there is a Log In button when the user is not logged in and a Log Out button when the user is logged in, all handled by code on the .jsp page.
I load a lot of JS code on the page, so I used a .appcache file to cache that. Unfortunatelly, even though I added my .jsp page to the Network area, the page is being cached in a funny way, ignoring the content server from the server. That means that my Log Out button shows when users are Logged Out and vice-versa.
I tried to add no-cache directives as meta tags, but they are all being ignored.
Ideas?
According to dive into HTML5, the page that references the manifest is automatically included in the manifest.
http://diveintohtml5.ep.io/offline.html
Q: Do I need to list my HTML pages in my cache manifest?
A: Yes and no. If your entire web application is contained in a single page, just make sure that page points to the cache manifest using the manifest attribute. When you navigate to an HTML page with a manifest attribute, the page itself is assumed to be part of the web application, so you don’t need to list it in the manifest file itself. However, if your web application spans multiple pages, you should list all of the HTML pages in the manifest file, otherwise the browser would not know that there are other HTML pages that need to be downloaded and cached.
I have a similar issue, and I think I will end up loading the contents of the page via AJAX.
Caching in appCache is a two stage process: first the cache manifest is checked (in this case, as the page is loading), then if the content of it has changed, that content is reloaded. However, in your case, by that time, the stale page is already loaded and displayed.
The easiest fix would be to specifically exclude the page (but not the .js) from the appCache, so that only the js is cached, and not the page. I sounds like you might have figured that out, as you are trying to do it by putting the page in the network area. Check that that exclusion is correct, as that sounds like the problem, and that html cache attributes are being set correctly on that page.
Related
General Scala-JS page building advice needed. Most of the examples seem to be of the pattern where the main into which your single page application will go is between the tags in a landing page html file. How do you handle the need to insert something in the meta area of the dom? Do I need to render my landing page dynamically from the server to accomplish this? My specific need is to inject a script tag into the meta area of an already defined static html page. I'm using scalajs-react.
Generally you will want a server-rendered "root page" for the SPA. This allows you to dynamically compute proper cache busting file names for your script and stylesheet tags and to easily manage the cache expiration of the root page. Also, for proper html5 push state support you'll want to serve that page at every URL, which is easily done with a server side route.
I need to create a custom Facebook Page Tab app which will show an external site in an iframe. This need to have adverts on it but I'm not sure if this is possible as the site is hosted externally.
I'm not sure if I need to sign up to the Facebook Audience Network to get approved etc. either?
Any help or advice would be great.
Many browsers have this limitation of not allowing external sites to be shown in an iframe. Imagine the case when you are working hard to create a site and others show all your content in iframes. That is, naturally frustrating.
However, there is a candidate-solution: Let's suppose you create a page which sends a request to the other site and appends all the content into the body and head of your page. This is very much possible, so the solution is to:
Create a page in your site, let's call it outsider
In the server-side code of your outsider page send a request to the desired page to be shown
You will get the html of the page. Process it and include its content into the head and body of outsider. This includes:
3.1. Checking all the CSS to be reached, as the target page might refer to local CSS, which is unreachable locally at your end. Process the URLs of CSS files
3.2. Checking all the Javascript to be reached, as the target page might refer to local JS, which is unreachable locally at your end. Process the URLs of JS files
3.3. Apply the idea described in 3.1. and 3.2. for other resources, like images, until you are satisfied with the content of outsider
Create an iframe, having the source to point to outsider. outsider is inside your scope, so it should be shown
NOTE: If the site owning the target page does not like the possibility of you showing their content inside iframes, they might protect it by, let's say, having Javascript in their code, which checks whether the page is inside an iframe. Remove that code while processing the response to your request. If nothing else prevents you from showing the page in an iframe, then you should achieve success.
I have an application running in an iFrame that is embedded in a SharePoint site. The problem with this is navigation within the application does not result in a change in the SharePoint site URL. Therefore, if you were to refresh the overall page, you would be sent back to the default page of the application, not stay on the same page of the application. The reason this is an issue is sharing for social media. I have added a Facebook Share button to the application, but when it pulls the URL of the application which does not match or reference the URL of the overall site, so it just shares the application (which is not visually appealing and does not allow you to access the rest of the site).
Any body have any suggestions or know a place I can go for help? Thanks!
If I understand properly, the Facebook stuff is INSIDE the iframe?
If so, you can:
* Remove the iframe and integrate the application better with SharePoint, or
* Change the application so that it detects that it's running "alone" (with javascript etc), and if so redirect to the "big" application.
IF the Facebook stuff is in SharePoint, OUTSIDE of the iframe, you can write some javascript to update the URL in some way that matches the URL of the application. This requires that the SharePoint parent application and the iframe application run in the same domain - if they are not, this is not an option.
Note that changing the "parent" URL with JS will reload the page, UNLESS you only change the URL after the "#" part (so you can do something like:
"http://sharepoint/iframe.aspx?aa=11&bb=22#iframeUrl=http://uglyapplication/"
You'll also probably want to write JS to update your iframe accordingly if the user press "back"/"forward" etc in the browser, because changing the URL like above will still add a "step" to the browser history.
I am writing an app within a facebook iframe and am unsure how best to write this. I originally wrote all the code within the main canvas.php file but found everything was running too slow before results were being loaded into the iframe.
I then tried using the php header location method so to try and load different pages into the iframe, thus reducing page load time. However, the header location is ignored.
I have also tried using javascript to get the page to load within the iframe instead, this does load in the new page but the page experiences lots of problems. It wil not pass parrameteres to itself using $_GET.
Basically, I need to perform some checks when the canvas page is first loaded in the iframe and then re-direct to another file to avoid the checks being perfomed on every page load as this seriously shows everything down. I then need to have page reloads with different parrameteres in the URL to populate the iframe with different results, again this is very slow as it has to perfomr all the checks again.
Therefore, how can I achieve a smooth workflow as a normal site within a facebook iframe?
[EDIT] Just thought is Ajax a valid option?
Many thanks in advance.
Most people experience slow response times due to not having a channelURL specified. See http://developers.facebook.com/docs/reference/javascript/
Channel File
The channel file addresses some issues with cross domain communication
in certain browsers. The contents of the channel.html file can be just
a single line:
It is important for the channel file to be cached for as long as
possible. When serving this file, you must send valid Expires headers
with a long expiration period. This will ensure the channel file is
cached by the browser which is important for a smooth user experience.
Without proper caching, cross domain communication will become very
slow and users will suffer a severely degraded experience. A simple
way to do this in PHP is:
The channelUrl parameter is optional, but recommended. Providing a
channel file can help address three specific known issues. First,
pages that include code to communicate across frames may cause Social
Plugins to show up as blank without a channelUrl. Second, if no
channelUrl is provided and a page includes auto-playing audio or
video, the user may hear two streams of audio because the page has
been loaded a second time in the background for cross domain
communication. Third, a channel file will prevent inclusion of extra
hits in your server-side logs. If you do not specify a channelUrl, you
can remove page views containing fb_xd_bust or fb_xd_fragment
parameters from your logs to ensure proper counts.
The channelUrl must be a fully qualified URL matching the page on
which you include the SDK. In other words, the channel file domain
must include www if your site is served using www, and if you modify
document.domain on your page you must make the same document.domain
change in the channel.html file as well. The protocols must also
match. If your page is served over https, your channelUrl must also be
https. Remember to use the matching protocol for the script src as
well. The sample code above uses protocol-relative URLs which should
handle most https cases properly.
So I created a nice 6 page website hutchspropertyandtree.co.nr using freedomain.co.nr via dropbox public folder. Everything was working and updating properly until i updated with iwebs SEO TOOL. I added meta and title tags as well as description etc... PROBLEM is that even though my .html files in dropbox are correct and show all new code and tags. when i open up my domain hutchspropertyandtree.co.nr it doesnt show any of my recent seo tool updates.
im thinking that the cheap domainname from .co.nr is the problem? Is it possible that the default tags and titles and keywords entered into the co.nr website creation boxs are overwriting the newer ones in the html within my dropbox?
But still doesnt explain why a stat counter code and google analytics code in the footer and header respectively still do not show up when i view source in browser.
PLEASE PLEASE HELP.
It's because the page at hutchspropertyandtree.co.nr uses a frame to show the content from another location. The meta information comes from the page with the frame, not the page in the frame. You should be able to see the content of the frame using an inspector (comes with all browsers these days) or "View frame source", if your browser does that.
Note that any search engine hits to your pages will link to the dropbox URL, not the frame page (that has essentially no content from the viewpoint of a search engine). If you want search engine results to show up under that domain, you'll have to get hosting that lets you point a domain directly to it.