I use Emacs v. 22 (the console version, either remotely with PuTTY or locally with Konsole) as my primary text editor on Linux. It takes a while to load up each time I start it though, probably almost a second, although I never timed it. I tend to open and close Emacs a lot, because I'm more comfortable using the Bash command-line for file/directory manipulation and compiling.
How can I speed up the start-up time?
Others have covered using gnuserve and emacsclient, and I'd suggest compiling within emacs (being able to jump to compilation errors is a win).
But, specifically speeding up the .emacs can be done by:
Byte compiling the .emacs file, which you can do automatically by using this snippet of code
Replacing as many of the (require 'package) statements with autoloaded functionality. This will delay loading of lisp until it's actually required. Using this technique allowed me to speed up my startup from >6 seconds to <1. This takes a little bit of work because not all libraries come properly marked autoload.
Removing code/functionality you no longer use.
Try running emacs with the option --no-site-file to avoid loading unnecessary packages in the site installation site-start.el.
If you are really serious, you can roll your own emacs with your favorite functionality already loaded. This, of course, means it's more involved to make changes to what you have in your .emacs because it's a part of the binary. Follow the link for information on how to use dump-emacs.
Buy a faster computer and/or faster disk.
How to determine what your .emacs loads
Now, how do you find out what your .emacs loads? With the goal to remove the functionality, or to delay it? Check your *Messages* buffer, which contains lines like:
Loading /home/tjackson/.emacs.tjackson.el (source)...
Loading /home/tjackson/installed/emacs/lisp/loaddefs.el (source)...done
Loading /user/tjackson/.elisp/source/loaddefs.el (source)...done
Loading autorevert...done
Loading /home/tjackson/.emacs.tjackson.el (source)...done
If you'll notice, the Loading statements can nest: the first .emacs.tjackson.el ends with ... and the last line shows the .emacs.tjackson.el load is ...done. All those other files are loaded from inside my .emacs.tjackson.el file. All the other loads are atomic.
Note: If you have a large .emacs, it's possible that the *Messages* buffer will lose some of the messages because it only keeps a fixed amount of information. You can add this setting early on to your .emacs to keep all the messages around:
(setq message-log-max t)
Note: It the 'load command will suppress the messages if its fourth argument nomessage is non-nil, so remove any such invocations (or, advise 'load and force the fourth argument to be nil).
In addition to Adam Rosenfield's solution, I recommend to use Emacs in server mode. You may add (server-start) to your dotemacs, and run emacsclient instead of emacs whenever you want to open file in Emacs. That way you have to pay the loading cost of Emacs only once, after then clients pop up immediately.
Edit
You're right, v22 does not create a new frame. Create a shell script that do the trick:
#!/bin/bash
# Argument: filename to open in new Emacs frame
/usr/bin/emacsclient -e '(let ((default-directory "`pwd`/")) (select-frame (make-frame)) (find-file "'$1'"))'
Edit 2
In v24+, you can do emacsclient -c to create a new frame.
Don't close Emacs every time you want to use the shell. Use Ctrl-Z to move Emacs to the background and the fg command in Bash to move it back to the foreground.
A couple of tips:
Use autoloads
Using autoload saves you from loading libraries until you use them.
For example:
(if (locate-library "ediff-trees")
(autoload 'ediff-trees "ediff-trees" "Start an tree ediff" t))
Compile your .emacs
Gives you a slight speed increase although there are pitfalls if you
work with version control and your .emacs is newer than .emacs.elc.
One common trick is:
(defun autocompile nil
"compile itself if ~/.emacs"
(interactive)
(require 'bytecomp)
(let ((dotemacs (file-truename user-init-file)))
(if (string= (buffer-file-name) (file-chase-links dotemacs))
(byte-compile-file dotemacs))))
(add-hook 'after-save-hook 'autocompile)
Learn to love emacs server.
Running emacs as a server means never having to close it down. However
I note your still using emacs22. emacs23 supports multi-tty which makes
it a lot easier to run emacs in one screen session and then bring up
new windows in another terminal. I use emacs to edit mail for my mail
client (mutt) and emacsclient is fantastic for these sort of quick edits.
One of
M-x shell
M-x eshell
M-x term
M-x ansi-term
should meet your command-line needs from within Emacs.
You can also use M-! (aka M-x shell-command) to execute a one-liner without dropping to the shell.
Check your .emacs file to see if you're loading unnecessary packages. Loading packages can take a significant amount of time. For example, you might only want to load the php-mode package if you're editing a PHP file. You can do that by installing a hook procedure, although I'm not certain of the details.
Also make sure that any packages you're loading are compiled (.elc files). You can compile an elisp file by running
emacs -batch -f batch-byte-compile thefile.el
Compiled packages load much faster than uncompiled packages.
"I tend to open and close emacs a lot, because I'm more comfortable using the bash command line for file/directory manipulation and compiling."
You're describing the way an editor like vim is used like. Shoot in&out. Emacs is usually kept open, and mostly all is done from "within it". hiena already answered what would be the correct approach here.
The fastest way is to profile your .emacs. I cut down my load time from >3s to 1s in 5 minutes after I found that 4 particular lines in my .emacs were taking up more than 80% of the load time.
One thing that helped me reduce the load time of my .emacs, in addition to autoload (as others have suggested), is eval-after-load. In the following example, delaying the call to sql-set-product saves you from having to load sql in your .emacs, making the exisiting sql autoloads more effective.
(eval-after-load "sql"
'(progn
(sql-set-product 'mysql)
(setq sql-mysql-options '("-C" "-t" "-f" "-n"))
(setq sql-sqlite-program "sqlite3")
))
Of course, for some packages there will be a hook available that you can do the same thing, but sometimes there isn't, or else this way just proves easier to think about.
Emacs is designed to run "all the time" (or at least for long periods of time), thus starting and stopping Emacs several times during a day is not recommended.
I would suggest using screen. Screen is a terminal multiplexer, giving you an unlimited virtual terminals in one terminal.
After installing simply write "screen emacs" in your terminal. Emacs will start as usual, but pressing "c-a c" (that is press ctrl-a and then c) will open a new virtual terminal. You can get back to emacs by pressing "c-a c-a" (that's two times ctrl-a).
You can even detach from the running screen session, the key sequence is "c-a d".
Re-attach to the session by issuing "screen -R" and you will be back where you left. This enables you to start an emacs session at work, detach, go home, and re-attach from home.
I've been running Emacs like this for months in a row.
Here's the official web site: http://www.gnu.org/software/screen/ but try googling for screen tutorials and howtos
You can use benchmark-init to profile your Emacs startup. It will keep track of what modules are being loaded and how much time is spent on each. The results can be presented either in a tabulated form or as a tree. The tree makes it easier to track who loads what, which can be helpful when you load a package with a lot of dependencies, and the tabulated form helps you quickly find where most of the time is being spent.
Once you have these results try to figure out if all of the modules have to be loaded all the time or if you can perhaps load some of them on-demand. For instance, in my configuration I only load Emacs extensions that are specific to certain modes when that mode is actually activated since most of the time I only use a small subset of them in a session. eval-after-load and mode hooks will be your friends here.
By applying this method my Emacs starts in 3-4 seconds and I have close to 200 extensions installed. Most of the time is spent loading Helm, which I always load since it replaces find-file and other core functions that are always needed, and CEDET, since I use the latest version and it has to be loaded before Emacs tries to load the older built-in version.
Try using the https://github.com/jwiegley/use-package macro to define your package loads and customizations. It handles deferred loading of packages for you, making it relatively easy to get good startup times even in the presence of large numbers of configured packages. I have almost 100 packages referenced in my .emacs, but my startup time is under 2 seconds on Linux, and 2.2s on the Mac.
One thing that others haven't mentioned is to include the elisp libraries you use as part of the dumped Emacs to move the library loading time from Emacs startup to Emacs build. It is not for the faint-hearted, but if you load several libraries in .emacs it could win you a few seconds of startup time.
I had around 120sec start time. I was able to find the fix installing this:
https://github.com/dholm/benchmark-init-el
put on top of your init.el
(let ((benchmark-init.el "~/.emacs.d/el-get/benchmark-init/benchmark-init.el"))
(when (file-exists-p benchmark-init.el)
(load benchmark-init.el)))
then once your emacs started, run:
M-x benchmark-init/show-durations-tree
On my side the problem was 127 secs in tramp-loaddefs
I fixed it by adding
127.0.0.1 host.does.not.exist
to /etc/hosts and that made my startup fast
see more here: https://github.com/emacs-helm/helm/issues/1045
another thing that maybe helpful to you: https://www.emacswiki.org/emacs/ProfileDotEmacs
This doesn't answer the question, but is kind of relevant
I don't know how to make it start faster, but there are a few things I could suggest:
for most things you do on the command line, you can do them in emacs:
compile: M-x compile, then type the command you use
my experience is only with C++, but with g++ you can press C-x ` to jump to lines that the compiler complains about
run shell commands: M-!, dumps output into a buffer
interactive shell: M-x shell
alternatively, you could run emacs like this:
emacs file.ext &
which opens emacs in the background so you can still use the shell ( this works best with putty and X forwarding with something like Xming)
I was trying to solve the same problem, when I came across this question here. I just wanted to add that the problem for me was not because of the load time of emacs lisp packages, but the fact that the host did not have a fully resolved hostname
To check your package load time do
M-x emacs-init-time
For me it was 0.3 seconds, and yet the load time was extremely high.
After changing my hostname correctly, it fixed the problem.
To configure your fully resolved hostname edit /etc/hostname, and /etc/hostsfile with:
127.0.0.1 localhost localhost.localdomain
192.168.0.2 hostname hostname.domain
I would have to check my customization, but there is a package called gnuserve or emacsclient. It migrates a lot so you will have to google for it.
It runs one emacs session in the background. Any further sessions of emacs are essentially just new frames of that session. One advatage is quick startup times for your later sessions.
I have Emacs on a Kubuntu 15.04 OS and I have a problem in showing the selected region; if I run emacs in the terminal windows with -nw option, I can set marks and I see the selected region highlighted; but if emacs starts in a window, the selected region is not highlighted, though it is still selected (ctrl+w cuts that part). Note that transient-mark-mode doesn't affect this behaviour, whether it is enabled or not.
Do you see this behavior when you start Emacs using emacs -Q (i.e., without an init file)? If not, then recursively bisect your init file until you locate the culprit code. You can do use command comment-region to comment out the region (with C-u it uncomments). Comment out 1/2, then 3/4, 7/8,... until you find the culprit.
If you see a problem using emacs -Q then give a step-by-step recipe to reproduce it.
If not, and if you narrow your init file to locate the problem but you still need more help at that point, report as much as you have found out, specifically. Again, step-by-step specifics help.
Ok, so thanks to Drew I finally managed to resolve this issue!
I had a file with path: /etc/X11/Xresources/x11-common
With the following content:
! $Id$
! load color-specific resources for clients that have them
#ifdef COLOR
*customization: -color
#endif
! make Xaw (Athena widget set) clients understand the delete key
! this causes problems with some non-Xaw apps, use with care
! *Text.translations: #override ~Shift ~Meta <Key>Delete: delete-next-character()
What I just did was moving that file away, running xrdb with an empty input, and everything went fine!
Now I just need to figure out what the content of that file was and what to do if I need to put it back where it was.
Thanks a lot for your precious help, Drew!
I am using run-octave in Emacs to trigger octave. Something is acting abnormally.
Every time I hit TAB to complete, there would be a tailing ^M; If I edit a .m file using edit a.m, it would start a new frame instead of a new buffer and the prompt is waiting for the closure of that frame so it would not respond to any input. How could I configure .emacs so that run-octave would behave normally?
Any comment is appreciated!
You seem to have two problems. I'm not sure about the trailing ^M, which seems to be caused by some sort of Windows/Unix CR/LF problem, but maybe I can help with the second problem.
The edit command uses the EDITOR environment variable to decide what to run. It seems that yours is either set to emacsclient or has defaulted to it. You haven't said whether you're on Unix or Windows, so I'm going to assume the former: you'll have to change this a bit for Windows.
To avoid the waiting thing, try running octave with a different EDITOR. For example, try out running
EDITOR='emacsclient -n' octave
When you type edit foo, it should bring up an Emacs buffer (if you want a new frame as well, use -c too) but not wait until you're done.
If this fixes things for you, you could change your ~/.bashrc to include the line
export EDITOR='emacsclient -n'
When I start Emacs, its windows and its minibuffer start up floating on the main frame, leaving a lot of empty space (see: here and here). Any idea of what is going on and how to fix it?
I'm using emacs version 23.1.1 on Xmonad
Thanks!
I get the same thing occasionally when doing a TAB expand in shell mode. I don't end up with an empty mini-buf, it usually has all the contents from the shell expand. The only solution I've found so far is to kill the current shell buffer
You might try C-l (recenter-top-bottom). I've used this over the years as a pretty reliable "repaint" operation that will clear up various detritus that occurs on the frame. It is even more helpful when you do not have a window system.
It looks like an odd interaction between Emacs and your window manager. It's as if Emacs is configuring itself to have a certain number of lines and columns in its active window, but the frame the window manager has allocated it is larger.
Can you try running X without Xmonad (ie. just run startX) and then run Emacs? You won't get frame decorations, but you can still use xterm to start it and see what 'natural' size it gets allocated. With the same Emacs configuration, that would narrow it down to some issue with Xmonad.
It's not obvious from the screenshots, as one is definitely in GUI mode, but the other (green on black) looks like it is in text mode. If you force it to run in text mode (emacs -nw), does it take up the same size? Within the shell, do normal commands take up the entire size of the allocated window?
Are the shell variables COLUMNS or LINES set correctly? Do they match the window dimensions? Assuming you are running bash, is shopt checkwinsize turned on? Do regular commands such as ls wrap at the expected margins and scroll to use the entire window?
It is worth ensuring that text mode is being configured correctly before getting GUI mode to work. I have a hunch the way that Xmonad is managing its window sizing may be the culprit, if it is 'forcing' windows to tile in certain arrangements, and the correct X hints aren't being sent. But - that's all just supposition for now...
This partially works (taken from here):
(defun fullscreen ()
(interactive)
(set-frame-parameter nil 'fullscreen
(if (frame-parameter nil 'fullscreen) nil 'fullboth)))
(add-hook 'emacs-startup-hook 'fullscreen)
The windows get corrected, although the mini-buffer is still larger than the usual.
Sounds like a bug, to me. Consider reporting it: M-x report-emacs-bug. Try to provide a recipe starting from emacs -Q.
As is, my emacs is set up to show green text on a black background. On seeing it, a friend remarked that I just took it because of the Matrix-like appearance it gives. So, now what I want to do is implement an idle animation for it where, like in the matrix, changing text falls down the screen. Like in the zone out functions, it should run after emacs has been idle for a while. How would this be done?
You might want to check out the package zone: M-x zone
The 'zone-pgm-drip is like the Matrix drip, only one character at a time. I'm sure it could be enhanced to be more flood like. Also, the 'zone-pgm-jitter has text flooding down, but it's just the text currently on the screen (so it's horizontal extent is limited to what was already showing). You can just run M-x zone over and over until you find what you like.
If you want to limit the choices zone uses, you can restrict the array that zone uses:
(setq zone-programs [zone-pgm-jitter])
The choices for zone-programs are:
zone-pgm-jitter
zone-pgm-putz-with-case
zone-pgm-dissolve
zone-pgm-explode
zone-pgm-whack-chars
zone-pgm-rotate
zone-pgm-rotate-LR-lockstep
zone-pgm-rotate-RL-lockstep
zone-pgm-rotate-LR-variable
zone-pgm-rotate-RL-variable
zone-pgm-drip
zone-pgm-drip-fretfully
zone-pgm-five-oclock-swan-dive
zone-pgm-martini-swan-dive
zone-pgm-rat-race
zone-pgm-paragraph-spaz
zone-pgm-stress
zone-pgm-stress-destress
zone-pgm-random-life
You could install zone-matrix from Marmalade. "M-x package-install zone-matrix"
Looks like someone just made one. It worked for me after a small amount of tweaking:
https://github.com/emacsmirror/zone-matrix
You could just use the xmatrix screensaver, which could probably be modified to run in a window other than the X root if you really want it to run it within emacs. Bonus points if you can modify it to use glyphs based on the text in the current window. By strange coincidence, Jamie Zawinski both wrote xmatrix and large chunks of Lucid Emacs, which was subsequently released under an open-source licence as Xemacs.