After the sub of the exec JCL, i've got the following error :
SQLCODE = -991
Error = ALL ATTACH WAS UNABLE TO ESTABLISH AN IMPLICIT CONNECT OR OPEN TO DB2
This error is triggered when i call a module that allows to query a table.
PS : i have the necessary privileges for the table.
Thanks.
From IBM's page:
-991 CALL ATTACH WAS UNABLE TO ESTABLISH AN IMPLICIT CONNECT OR OPEN TO DB2. RC1= rc1 RC2= rc2
And some general links for SQL return code information:
http://en.wikipedia.org/wiki/DB2_SQL_return_codes
http://theamericanprogrammer.com/programming/sqlcodes.shtml
http://www-01.ibm.com/support/docview.wss?rs=64&uid=swg27011656 - use the searches here to find lots of things
http://publib.boulder.ibm.com/infocenter/dzichelp/v2r2/index.jsp
It is possible you are not running on the same LPAR as DB2 and you don't have sharing enabled.
Ensure you included DSNALI in your program bind (aka link) step, and that you're running on the correct LPAR.
Related
While i am executing the DB2 Java class and i am getting the below error.
com.ibm.db2.jcc.am.SqlException: DB2 SQL Error: SQLCODE=-4742,
SQLSTATE=560D5, SQLERRMC=6, DRIVER=4.24.92
Thanks,
Rasheed SK
Have you followed the instructions and suggestions in the documentation?
Specifically for the -4742 sqlcode.
your table is not added idaa check your table from idaa db
I recently started working with Robot framework. So I had a requirement where I needed to connect with Postgres db.
So though I am able to connect with the db but then when I try to execute queries, the flow is getting stuck. Even the test is not failing. Following is what I did:
Connect To Database psycopg2 ${DBName} ${DBUser} ${DBPass} ${DBHost} ${DBPort}
${current_row_count} = Row Count Select * from xyz
The first statement is executing fine but then it gets stuck on second statement.
Can somebody help me out on this
To Execute Query and get data from result :
Connect To Database psycopg2 ${DBName} ${DBUser} ${DBPass} ${DBHost} ${DBPort}
${output} = Query SELECT * from xyz;
Log ${output}
${DataResults}= Get from list ${output} 0
${DataResults}= Convert to list ${DataResults}
${DataResults}= Get from list ${DataResults} 0
${DataResults} convert to string ${DataResults}
Disconnect From Database
You are not executing your query.... read below a bit documentation and an example ;)
In the example you can see example variable but introduce your data ;)
Name: Connect To Database Using Custom Params
Source: DatabaseLibrary
Arguments:
[ dbapiModuleName=None | db_connect_string= ]
Loads the DB API 2.0 module given dbapiModuleName then uses it to connect to the database using the map string db_custom_param_string.
Example usage Example usage: :
Connect To Database Using Custom Params pymssql database='${db_database}' , user='${db_user}', password='${db_password}', host='${db_host}'
${queryResults} Query ${query}
Disconnect From Database
I am new to Hibernate. Using the 5.2.10 FINAL version connecting to Oracle 11g using the Oracle10gDialect with JPA 2.1 and ojdbc8.jar
I try to access a simple stored procedure taking a String input parameter and output a Oracle SYS_REFCURSOR.
StoredProcedureQuery call = session.createStoredProcedureCall("sp_get_profile");
call.registerStoredProcedureParameter(1, String.class, ParameterMode.IN);
call.registerStoredProcedureParameter(2, Class.class, ParameterMode.REF_CURSOR);
call.execute();
An exception occur when I access the function
ERROR SqlExceptionHelper Invalid column type: 2012
DatabaseException::error=[Error registering REF_CURSOR parameter [2]]
I try to write a simple program connecting to DB with the Oracle Driver only. I will have the same error if I register Types.REF_CUSOR as the output parameter to CallableStatement.
cs.registerOutParameter(2, Types.REF_CURSOR);
And the problem can be solved by changing to OracleTypes
cs.registerOutParameter(2, OracleTypes.CURSOR);
Anyone know what is wrong? I need to fall back to use the traditional SQL programming if I cannot get the stored procedure access success. . . please help.
Finally got it work, I should check the Oracle JDBC document first before implementation.
ojdbc8 should be good for Oracle 12c + JDK8 + JPA2.1 with Oracle12cDialect.
For Oracle 11g, need to use ojdbc6.jar
I solved that issue by debugging OJDBC and Hibernate, the building from sources a patched Hibernate CORE library (5.4.15-Final).
I have patched the method ExtractedDatabaseMetaDataImpl.supportsRefCursors which returns always false.
Im running a workflow in powercenter that is constatnly getting an SQL1224N error.
This process execute a query against one table (POLIZA) with 800k rows, it retrieves the first 10k rows and then it start to execute to another table with 75M rows, at ths moment in DB2 an idle thread error appear but the PWC process still running retrieving the 75M rows, when it is completed (after 20 minutes) the errros comes up related with the first table:
[IBM][CLI Driver] SQL1224N A database agent could not be started to service a request, or was terminated as a result of a database system shutdown or a force command. SQLSTATE=55032
sqlstate = 40003
[IBM][CLI Driver] SQL1224N A database agent could not be started to service a request, or was terminated as a result of a database system shutdown or a force command. SQLSTATE=55032
sqlstate = 40003
Database driver error...
Function Name : Fetch
SQL Stmt : SELECT POLIZA.BSPOL_BSCODCIA, POLIZA.BSPOL_BSRAMOCO
FROM POLIZA
WHERE
EXA01.POLIZA.BSPOL_IDEMPR='0015' for read only with ur
Native error code = -1224
DB2 Fatal Error].
I have a similar process runing against the same 2 tables and it is woking fine where the only difference I can see is that the DB2 user is different.
Any idea how can i fix this?
Regards
The common causes for -1224 are:
Your instance or database has crashed, or
Something/somebody is forcing off your application (FORCE APPLICATION or equivalent)
As for the crash, I think you would know by know. This typically requires a database or instance restart. At any rate, can you please have a look into your DIAGPATH to check for any FODC* directories whose timestamp would match the timestamp of the -1224 errors?
As for the FORCE case, you should find some evidence of the -1224 in db2diag.log. Try searching for the decimal -1224, but also for its hex representation (0xFFFFFB38).
I am trying to connect to DB2 in my local LAN using worklight 6.1.0 and firing a Select Query for lookup of data if exist. But i am getting below error:
{
"errors": [
"Runtime: DB2 SQL Error: SQLCODE=-204, SQLSTATE=42704, SQLERRMC=DATABASE_NAME.REGISTRATION, DRIVER=3.58.82.\nPerformed query:\nSELECT * FROM DATABASE_NAME.registration where DATABASE_NAME.registration.Mob_No = ?"
],
"info": [
],
"isSuccessful": false,
"warnings": [
]
}
My SQL adapter configuration looks like below:
<connectionPolicy xsi:type="sql:SQLConnectionPolicy">
<!-- Example for using a JNDI data source, replace with actual data source name -->
<!-- <dataSourceJNDIName>java:/data-source-jndi-name</dataSourceJNDIName> -->
<!-- Example for using MySQL connector, do not forget to put the MySQL connector library in the project's lib folder -->
<dataSourceDefinition>
<driverClass>com.ibm.db2.jcc.DB2Driver</driverClass>
<url>jdbc:db2://172.21.11.129:50000/MOBILEDB</url>
<user>db2admin</user>
<password>Newuser123</password>
</dataSourceDefinition>
</connectionPolicy>
And js file which has procedure looks like:
var selectStatement1 = "SELECT * FROM DATABASE_NAME.registration where DATABASE_NAME.registration.Mob_No = ?";
var procStmt1 = WL.Server.createSQLStatement(selectStatement1);
function registrationLookup(mobile){
WL.Logger.debug("Inside registrationLookup");
return WL.Server.invokeSQLStatement(
{
preparedStatement : procStmt1,
parameters : [mobile]
}
);
}
I did some Research about connecting DB2 with Worklight and came to know that i need to put below data in worklight.properties file.
wl.db.username=db2admin
wl.db.type=DB2
wl.db.password=Newuser123
wl.db.driver=com.ibm.db2.jcc.DB2Driver
But after adding it, i am not able to deploy Adapter and error says 'db2admin' does not exist. So i have skipped this step in the context of current question. But after going through error which i am getting without adding this worklight.properties data it seems to me that 'Object doesn't exist' as per http://www-01.ibm.com/support/docview.wss?uid=swg21613531 or user table does not exist. Any suggestion would be helpful.
NOTE:
My IP address is 172.21.11.125 from where i am invoking Adapter for DB2.
DB2 instance is running on 172.21.11.129 # 50000.
Already Added db2jcc_license_cu_9.5.jar & db2jcc_9.5.jar in server/lib. It had name appended with '_9.5' which i have removed from both jar and kept only db2jcc_license_cu.jar and db2jcc.jar.
The error message is saying that your SQL statement is invalid, and I therefore infer that your connection to the DB is fine.
To diagnose this first run the SQL using DB2 command line or other tools. My guess is you mean
LARSEN.registration
whereas you are saying DATABASE_NAME.registration
Got Answer to my own Question and its really interesting one. Thanks to https://stackoverflow.com/users/2260967/glen-misquith [Glen Misquith]
Problem was with SQL Query framing which is Different what i did with MYSQL.
Adapter's Java Script file:
var selectStatement4 = "UPDATE \"LARSEN\".\"registration\" SET \"LARSEN\".\"registration\".\"Pass\"=?, \"LARSEN\".\"registration\".\"Re_Pass\"=? WHERE \"User_Name\" = ?";
var procStmt5 = WL.Server.createSQLStatement(selectStatement4);
function updatePassword(username,pass,repass){
WL.Logger.debug("Inside updatePassword "+username+" "+pass+" "+repass);
return WL.Server.invokeSQLStatement(
{
preparedStatement : procStmt5,
parameters : [pass,repass,username]
}
);
}
This is quite a Strange thing Slashes need to be used in SQL Statement while Preparing it.
I would really like to understand this behavior of DB2. And also i cant directly write 'Select * from schema.table_name' and precisely write column name from which data needs to be fetched.