I'm working on a game with cocos2D game engine and make load all the sprites while it load the level, now as because some of sprites (obstacles) are taller than 320 pixel, thus it seems difficult to check them out. So for the convenience sake I want to apply ZOOM IN and ZOOM out effect, which minimizes entire level's all sprites at once, and in zoom out case these will resided to there old position.
Can I achieve this?
If yes, then how?
Please tell about pinch zoom also.
Zooming, is fairly simple, simply set the scale property of your main game layer... but there are a few catches.
When you scale the layer, it will shift the position of the layer. It won't automatically zoom towards the center of what you're currently looking at. If you have any type of scrolling in your game, you'll need to account for this.
To do this, set the anchorPoint of your layer to ccp(0.0f, 0.0f), and then calculate how much your layer has shifted, and reposition it accordingly.
- (void) scale:(CGFloat) newScale scaleCenter:(CGPoint) scaleCenter {
// scaleCenter is the point to zoom to..
// If you are doing a pinch zoom, this should be the center of your pinch.
// Get the original center point.
CGPoint oldCenterPoint = ccp(scaleCenter.x * yourLayer.scale, scaleCenter.y * yourLayer.scale);
// Set the scale.
yourLayer.scale = newScale;
// Get the new center point.
CGPoint newCenterPoint = ccp(scaleCenter.x * yourLayer.scale, scaleCenter.y * yourLayer.scale);
// Then calculate the delta.
CGPoint centerPointDelta = ccpSub(oldCenterPoint, newCenterPoint);
// Now adjust your layer by the delta.
yourLayer.position = ccpAdd(yourLayer.position, centerPointDelta);
}
Pinch zoom is easier... just detect the touchesMoved, and then call your scaling routine.
- (void) ccTouchesMoved:(NSSet*)touches withEvent:(UIEvent*)event {
// Examine allTouches instead of just touches. Touches tracks only the touch that is currently moving...
// But stationary touches still trigger a multi-touch gesture.
NSArray* allTouches = [[event allTouches] allObjects];
if ([allTouches count] == 2) {
// Get two of the touches to handle the zoom
UITouch* touchOne = [allTouches objectAtIndex:0];
UITouch* touchTwo = [allTouches objectAtIndex:1];
// Get the touches and previous touches.
CGPoint touchLocationOne = [touchOne locationInView: [touchOne view]];
CGPoint touchLocationTwo = [touchTwo locationInView: [touchTwo view]];
CGPoint previousLocationOne = [touchOne previousLocationInView: [touchOne view]];
CGPoint previousLocationTwo = [touchTwo previousLocationInView: [touchTwo view]];
// Get the distance for the current and previous touches.
CGFloat currentDistance = sqrt(
pow(touchLocationOne.x - touchLocationTwo.x, 2.0f) +
pow(touchLocationOne.y - touchLocationTwo.y, 2.0f));
CGFloat previousDistance = sqrt(
pow(previousLocationOne.x - previousLocationTwo.x, 2.0f) +
pow(previousLocationOne.y - previousLocationTwo.y, 2.0f));
// Get the delta of the distances.
CGFloat distanceDelta = currentDistance - previousDistance;
// Next, position the camera to the middle of the pinch.
// Get the middle position of the pinch.
CGPoint pinchCenter = ccpMidpoint(touchLocationOne, touchLocationTwo);
// Then, convert the screen position to node space... use your game layer to do this.
pinchCenter = [yourLayer convertToNodeSpace:pinchCenter];
// Finally, call the scale method to scale by the distanceDelta, pass in the pinch center as well.
// Also, multiply the delta by PINCH_ZOOM_MULTIPLIER to slow down the scale speed.
// A PINCH_ZOOM_MULTIPLIER of 0.005f works for me, but experiment to find one that you like.
[self scale:yourlayer.scale - (distanceDelta * PINCH_ZOOM_MULTIPLIER)
scaleCenter:pinchCenter];
}
}
If all the sprites have the same parent you can just scale their parent and they will be scaled with it, keeping their coordinates relative to the parent.
this code scale my Layer by 2 to specific location
[layer setScale:2];
layer.position=ccp(240/2+40,160*1.5);
double dx=(touchLocation.x*2-240);
double dy=(touchLocation.y*2-160);
layer.position=ccp(inGamePlay.position.x-dx,inGamePlay.position.y-dy);
My code and it works better than other ones:
- (void)ccTouchesMoved:(NSSet *)touches withEvent:(UIEvent *)event {
NSArray* allTouches = [[event allTouches] allObjects];
CCLayer *gameField = (CCLayer *)[self getChildByTag:TAG_GAMEFIELD];
if (allTouches.count == 2) {
UIView *v = [[CCDirector sharedDirector] view];
UITouch *tOne = [allTouches objectAtIndex:0];
UITouch *tTwo = [allTouches objectAtIndex:1];
CGPoint firstTouch = [tOne locationInView:v];
CGPoint secondTouch = [tTwo locationInView:v];
CGPoint oldFirstTouch = [tOne previousLocationInView:v];
CGPoint oldSecondTouch = [tTwo previousLocationInView:v];
float oldPinchDistance = ccpDistance(oldFirstTouch, oldSecondTouch);
float newPinchDistance = ccpDistance(firstTouch, secondTouch);
float distanceDelta = newPinchDistance - oldPinchDistance;
NSLog(#"%f", distanceDelta);
CGPoint pinchCenter = ccpMidpoint(firstTouch, secondTouch);
pinchCenter = [gameField convertToNodeSpace:pinchCenter];
gameField.scale = gameField.scale - distanceDelta / 100;
if (gameField.scale < 0) {
gameField.scale = 0;
}
}
}
Related
At the moment, I have a puzzle game, with some objects that are movable using the ccTouchesBegan && ccTouchesMoved method
Called in ccTouchesBegan:
if (CGRectContainsPoint(newBoundingBox, touchLocation))
{
//Set the selectedSprite to the sprite with newBoundingBox
}
Then in ccTouchesMoved i do:
CGPoint translation = ccpSub(touchLocation, oldTouchLocation);
newPos = ccpAdd(selSprite.position, translation);
selectedSprite.position = newPos;
Now this all works fine and dandy, HOWEVER, some of the objects that I am moving are about 140x40px (on the 320x480 iPhone), and sometimes the ccTouchesBegan method won't acknowledge the boundingBox containing the touchLocation.
My question is, Can I increase the size of the boundingBox of the object so that if the user "misses" with there touch a little bit, it will help them out? It's a little frustrating requiring you to be so precise on a touch screen to move an obstacle.
EDIT: for iPhonic:
How I get touchLocation, this is in ccTouchesBegan:
NSSet *touchSet = [event allTouches];
int numberOfTouches = [touchSet count];
CGPoint touchLocation = [self convertTouchToNodeSpace:[touches anyObject]];
allTouches is passed automatically when the a touch begins.
-(BOOL) ccTouchBegan:(UITouch *)touch withEvent:(UIEvent *)event
{
CGPoint location = [self convertTouchToNodeSpace: touch];
for (CCSprite *tempSprite in sprites )
{
//Increase the size of bounding box..
CGRect rect=tempSprite.boundingBox;
rect.size.height=rect.size.height + 20;
rect.size.width=rect.size.width + 20;
if (CGRectContainsPoint(rect, location))
{
//Your stuffs
}
}
}
just like the path in the picture
(new users aren't allowed to post images, sorry i can only give the link)
http://cdn.dropmark.com/30180/3bd0f0fc6ee77c1b6f0e05e3ea14c821f8b48a82/questiong1-1.jpg
Thanks a lot for any help
Try this on touches event delegate (if you want to rotate the view with touch event)-
- (void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event
{
touches = [event allTouches];
UITouch *touch = [[event allTouches] anyObject];
CGPoint Pageposition = [touch locationInView:self];
CGPoint prevPoint = [[[touches allObjects] objectAtIndex:0] previousLocationInView:self];
CGPoint curPoint = [[[touches allObjects] objectAtIndex:0] locationInView:self];
float prevAngle = atan2(prevPoint.x, prevPoint.y);
 float curAngle= atan2(curPoint.x, curPoint.y);
float angleDifference = curAngle - prevAngle;
CGAffineTransform newTransform3 = CGAffineTransformRotate(self.transform, angleDifference);
self.transform = newTransform3;
}
use transform rotation , and tell me if it works..
Please look at my answer for this question about "rotating a label around an arbitrary point" for a more detailed explanation about using the an anchor point when rotating (ignore the keyframe animation answers since they are more complicated and not the "right tool for this job" even though the answers says so).
In short: set the anchor point to the point (in the unit-coordinate system of your views layer) to the point outside of your view and just apply a normal rotation animation.
EDIT: One thing to remember
The frame of your layer (which is also the frame of your view) is calculated using the position, bounds and anchor point. Changing the anchorPoint will change where your view appears on screen. You can counter this by re-setting the frame after changing the anchor point (this will set the position for you). Otherwise you can set the position to the point you are rotating to yourself. The Layer Geometry and Transforms (linked to in the other question) also mentions this.
The code that I provided in that answer (generalized to a UIView and Core Animation instead of UIView-animations):
#define DEGREES_TO_RADIANS(angle) (angle/180.0*M_PI)
- (void)rotateView:(UIView *)view
aroundPoint:(CGPoint)rotationPoint
duration:(NSTimeInterval)duration
degrees:(CGFloat)degrees {
CABasicAnimation *rotationAnimation = [CABasicAnimation animationWithKeyPath:#"transform"];
[rotationAnimation setDuration:duration];
// Additional animation configurations here...
// The anchor point is expressed in the unit coordinate
// system ((0,0) to (1,1)) of the label. Therefore the
// x and y difference must be divided by the width and
// height of the view (divide x difference by width and
// y difference by height).
CGPoint anchorPoint = CGPointMake((rotationPoint.x - CGRectGetMinX(view.frame))/CGRectGetWidth(view.bounds),
(rotationPoint.y - CGRectGetMinY(view.frame))/CGRectGetHeight(view.bounds));
[[view layer] setAnchorPoint:anchorPoint];
[[view layer] setPosition:rotationPoint]; // change the position here to keep the frame
CATransform3D rotationTransform = CATransform3DMakeRotation(DEGREES_TO_RADIANS(degrees), 0, 0, 1);
[rotationAnimation setToValue:[NSValue valueWithCATransform3D:rotationTransform]];
// Add the animation to the views layer
[[view layer] addAnimation:rotationAnimation
forKey:#"rotateAroundAnchorPoint"]
}
Currently i am following this Link to perform Single finger rotation on an image and its working fine.But i am wondering after performing rotation, how to perform translation operation if i want to move the image from one postion of screen to any other position.
- (void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event
{
// We can look at any touch object since we know we
// have only 1. If there were more than 1 then
// touchesBegan:withEvent: would have failed the recognizer.
UITouch *touch = [touches anyObject];
// A tap can have slight movement, but we're not interested
// in a tap. We want more movement. So if a tap is detected
// fail the recognizer.
if ([self state] == UIGestureRecognizerStatePossible) {
[self setState:UIGestureRecognizerStateBegan];
} else {
[self setState:UIGestureRecognizerStateChanged];
}
// To rotate with one finger, we simulate a second finger.
// The second figure is on the opposite side of the virtual
// circle that represents the rotation gesture.
UIView *view = [self view];
CGPoint center = CGPointMake(CGRectGetMidX([view bounds]), CGRectGetMidY([view bounds]));
CGPoint currentTouchPoint = [touch locationInView:view];
CGPoint previousTouchPoint = [touch previousLocationInView:view];
// use the movement of the touch to decide
// how much to rotate the carousel
CGPoint line2Start = currentTouchPoint;
CGPoint line1Start = previousTouchPoint;
CGPoint line2End = CGPointMake(center.x + (center.x - line2Start.x), center.y + (center.y - line2Start.y));
CGPoint line1End = CGPointMake(center.x + (center.x - line1Start.x), center.y + (center.y - line1Start.y));
//////
// Calculate the angle in radians.
// (From: http://iphonedevelopment.blogspot.com/2009/12/better-two-finger-rotate-gesture.html )
CGFloat a = line1End.x - line1Start.x;
CGFloat b = line1End.y - line1Start.y;
CGFloat c = line2End.x - line2Start.x;
CGFloat d = line2End.y - line2Start.y;
CGFloat line1Slope = (line1End.y - line1Start.y) / (line1End.x - line1Start.x);
CGFloat line2Slope = (line2End.y - line2Start.y) / (line2End.x - line2Start.x);
CGFloat degs = acosf(((a*c) + (b*d)) / ((sqrt(a*a + b*b)) * (sqrt(c*c + d*d))));
CGFloat angleInRadians = (line2Slope > line1Slope) ? degs : -degs;
//////
[self setRotation:angleInRadians];
}
I am not sure that my answer will help you, but I fear that you cannot do "one-touch" rotation and "one-touch" translation at the same time. Indeed, your code always interprets a single touch as for rotation, by "simulating" the presence of a second finger touching the display.
What you could do is trying and differentiate two single-finger gestures so to associate one with rotation and the other with translation. For example, the gesture for translation could be a "long touch" (i.e., you touch and keep touching for some time, then you move the object).
Hope this helps, anyway...
This isn't another one of "those" questions, don't worry.
Basically I want to test for a pinch and then run an animation. Here is the code I currently have:
// test for a pinch
- (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event {
NSSet *allTouches = [event allTouches];
if([allTouches count] == 2){
//there are two touches...
UITouch *firstTouch = [[allTouches allObjects] objectAtIndex:0];
UITouch *secondTouch = [[allTouches allObjects] objectAtIndex:1];
CGPoint firstPoint = [firstTouch locationInView:self.superview];
CGPoint secondPoint = [secondTouch locationInView:self.superview];
int X1 = firstPoint.x;
int Y1 = firstPoint.y;
int X2 = secondPoint.x;
int Y2 = secondPoint.y;
// lets work out the distance:
// sqrt( (x2-x1)^2 + (y2-y1)^2 );
preDistance = sqrtf( (float)pow((X2-X1),2) + (float)pow((Y2-Y1),2) );
}
}
- (void)touchesEnded:(NSSet *)touches withEvent:(UIEvent *)event {
NSSet *allTouches = [event allTouches];
if([allTouches count] == 2){
//there are two touches...
UITouch *firstTouch = [[allTouches allObjects] objectAtIndex:0];
UITouch *secondTouch = [[allTouches allObjects] objectAtIndex:1];
CGPoint firstPoint = [firstTouch locationInView:self.superview];
CGPoint secondPoint = [secondTouch locationInView:self.superview];
int X1 = firstPoint.x;
int Y1 = firstPoint.y;
int X2 = secondPoint.x;
int Y2 = secondPoint.y;
// lets work out the distance:
// sqrt( (x2-x1)^2 + (y2-y1)^2 );
postDistance = sqrtf( (float)pow((X2-X1),2) + (float)pow((Y2-Y1),2) );
// lets test now
// if the post distance is LESS than the pre distance then
// there has been a pinch INWARDS
if(preDistance > postDistance){
NSLog(#"Pinch INWARDS");
// so we need to move it back to its small frame
if(CGRectEqualToRect(self.frame, largeFrame) && !CGRectIsEmpty(self.smallFrame)){
// we can go inwards
[UIView beginAnimations:nil context:nil];
[UIView setAnimationDuration:0.5];
self.frame = smallFrame;
[UIView commitAnimations];
}
}
else {
NSLog(#"Pinch OUTWARDS");
// so we need to move it back to its small frame
if(!CGRectEqualToRect(self.frame, largeFrame)){
// we can go outwards
// set org frame
smallFrame = self.frame; // so we can go back later
[UIView beginAnimations:nil context:nil];
[UIView setAnimationDuration:0.5];
self.frame = largeFrame;
[UIView commitAnimations];
}
}
}
}
All it does is measure the distance between the two touches if there is a multi touch, then it measures the distance again when the touches end. If the difference between the two is positive then it was an outwards pinch, and if it was negative it was an inwards pinch.
Depending on the direction of the pinch the image view will scale bigger or smaller to and from set CGRects (this is why I don't want the "normal" pinch and zoom functionality). I just want it to be a gesture to scale an image up and down again.
However, this isn't working very well... it doesn't always pick up pinches. I don't know if this is because the view its in is also detecting touches (only single pinches), but still...
Anyway, I was wondering if anyone has a better way of detecting pinches? I've currently subclassed the UIImageView to create my ImageController class which has these touch methods in them. All I need to know is a) they are touching this image and b) which direction they've pinched in.
Thanks
Check out UIPinchGestureRecognizer in the documentation. I haven't used it, but seems like it's just what you need.
Anyway, I was wondering if anyone has a better way of detecting pinches?
If you're targeting iOS 3.2 and upwards you can use gesture recognizers - there's no good reason not to. If you need to target pre 3.2, then your above approach (or varients therein, using touchesBegin, etc) is the only way, so it's just tweaking the algorithm.
If you can, I'd strongly recommend using UIPinchGestureRecognizer. It will make your life considerably easier, as it handles all the details. If you want to detect both the scale and direction of the pinch you can combine UIPinchGestureRecognizer with a UIRotationGestureRecognizer - the former will just give you the scale of a pinch, not the relative angle.
If you can live without 3.1.x devices I would recommend that you use the UIPinchGestureRecognizer. It's very simple to use, but the problem is that you're only going to be able to run it on iOS devices running 3.2 and upwards.
For some reason you are using locationInView to identify the position of the touches. Have you tried identifying the touches location in the current view (the actual image view)? Calling superview means that you will get the position of the touches in the view that contains your image view.
I'm building an iPhone app. I have a UIView that contains a set of UIImageView subclass objects. The user can drag and rotate the image views via touch. I'm having trouble moving the image view after it has been rotated.
To rotate an image view, I apply a transform rotation, which works fine. It looks like this:
CGAffineTransform trans = self.transform;
self.transform = CGAffineTransformRotate(trans, delta);
The problem comes later when the user tries to move the element via touch. In touchesBegan:WithEvent:, I save the start point in a class variable, startLocation:
- (void) touchesBegan:(NSSet*)touches withEvent:(UIEvent*)event
{
// Retrieve the touch point
CGPoint pt = [[touches anyObject] locationInView:self];
startLocation = pt;
}
In touchesMoved:withEvent:, I had the following code, which works well enough if there is no rotation transform on the image view:
- (void) touchesMoved:(NSSet*)touches withEvent:(UIEvent*)event
{
CGPoint pt = [[touches anyObject] locationInView:self];
CGFloat dx = pt.x - startLocation.x;
CGFloat dy = pt.y - startLocation.y;
CGPoint newCenter = CGPointMake(self.center.x + dx, self.center.y + dy);
self.center = newCenter;
}
But if there is a rotation transform on the image view, then the image view thrashes about the screen on each touchesMoved event and soon disappears. In the debugger, I observed that the value of pt became monstrous. It occurred to me that I needed to transform that point, which I did, like so:
- (void) touchesMoved:(NSSet*)touches withEvent:(UIEvent*)event
{
CGPoint pt = [[touches anyObject] locationInView:self];
if (!CGAffineTransformIsIdentity(self.transform)) {
pt = CGPointApplyAffineTransform(pt, self.transform);
}
CGFloat dx = pt.x - startLocation.x;
CGFloat dy = pt.y - startLocation.y;
CGPoint newCenter = CGPointMake(self.center.x + dx, self.center.y + dy);
}
This worked much better. I can drag the image about the screen now. But the very first movement causes the image to jolt once in one direction or another, depending on the angle of rotation in the transform and the dimensions of the image view.
How can I move the image view without having the initial jolt?
Why is it that I do not need to transform startLocation (the point I capture when touches began)?
- (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)_event {
CGPoint pt = [[touches anyObject] locationInView:self];
startLocation = pt;
}
- (void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)_event {
CGPoint pt = [[touches anyObject] previousLocationInView:self];
CGFloat dx = pt.x - startLocation.x;
CGFloat dy = pt.y - startLocation.y;
CGPoint newCenter = CGPointMake(self.center.x + dx, self.center.y + dy);
self.center = newCenter;
}
- (void)setRotation:(float)rotation {
self.transform = CGAffineTransformRotate(self.transform, degreesToRadians(rotation));
}
It seems you need to convert the coordinates from the main not-rotated object to the rotated-view system.
Take a look at the UIView method "convertPoint:toView:":
convertPoint:toView:
Converts a point from the receiver’s coordinate system to that of the specified view.
- (CGPoint)convertPoint:(CGPoint)point toView:(UIView *)view
Parameters
point
A point specified in the local coordinate system (bounds) of the receiver.
view
The view into whose coordinate system point is to be converted. If view is nil, this method instead converts to window base coordinates. Otherwise, both view and the receiver must belong to the same UIWindow object.
Return Value
The point converted to the coordinate system of view.
Update:
In response to the comments:
You have to get the "real" coordinates of the finger touch (in the non-rotated system), then when the finger moves you always have new coordinates in the main non-rotated view: and they are the point that you have to convert in the rotated view parent of the view that you are moving.
If A is a mainView 320x480 pixel
and B is a subView 320x480 pixel centered in A,
and C is a subView in B at position 170,240 (+10,+0 of the screen center)
and you rotate B of 90 degrees clockwise
then C is still in 170,240 in B
But you see it in 160,250 on the screen,
and if now the user want to move it +20 to the right the user moves the finger +20 in the screen coordinates, not in the B view coordinates,
so the user would like to see it in 180,250 of the screen,
that means you need to convert this point in the B coordinates system...
So it's a bit easier, you just need to get the screen coordinates of the finger when the user moves it and just convert it in rotated-view coordinates (B)...