For some reason, I'm no longer able to connect and deploy to my wp7 device. Zune does not show the phone as being connected, despite the fact that it is connected and the phone shows that it's being charged ... and the wpconnect tool gives the following error:
Failed to connect to the device.
Ensure that the device is completely
booted and is connected to the PC.
(0x80070103)
I rebooted the phone, and I've deployed to it before, so it's definitely developer unlocked. I verified that my computer has internet access. Any other troubleshooting thoughts?
Hey, I run into this all the time. Simply restart your phone and connect again. Make sure you plug in and unplug the phone several times, waiting at least a minute if it doesn't work.
In short, it's temperamental, Keep trying.
Make sure that you have switched off WiFi and Bluetooth on your phone.
I have found that I cannot deploy when Wifi and Bluetooth are switched on - even though Zune is syncing music and other content in the usual fashion. The error messages are frustratingly unhelpful!
As a short term workaround try using the Application Deployment utility to deploy the xap file.
I had the same issue. When I changed the Project properties target OS to 7.1 it worked.
I had the same issue. Only restoring to the previous OS version helped me.
Also I would that it usually happens when internet sharing is turned on.
I think I finally found the problem!
When I had this problem a few days ago, I had been charging my phone (Lumia 900) using a faulty charger which keeps on getting disconnected. And now that I've changed the cable and charger, it started working again!
I had the same problem with my previous phone as well (HTC Mozart), and I had a bad cable back then, but never made the connection (geddit?) between the problem and the cable...
My theory is that when the phone is running on bad power supply/not getting enough power, it sets a flag in the registry, which throws that error.
Also, bizarrely I just found that if you have internet sharing turned on then it won't let you connect.
Any of above mentioned did not work for me. I had many different error messages (included the 0x80070103)
What did is this:
Go to https://dev.windowsphone.com, uregister your phone.
Launch registration tool ("C:\Program Files (x86)\Microsoft SDKs\Windows Phone\v8.0\Tools\Phone Registration\PhoneReg.exe")
Unregister in tool from 2) too (if it is showing still as
registered).
Now disconnect phone and connect it again
Register phone in tool from 2)
Related
I have 5000 devices enrolled with EMM using android management API and recently I am getting issues with multiple devices out of nowhere and getting and error prompt after scanning the QR code on re-enrollment. All of my enrolled devices are Samsung Tab with the older version of android(7-9) and the issue doesn't seem to be related to the android version. Also, The issue has been experienced for the device which was earlier enrolled and was working fine but recently has this issue, we tried re-enrolling it but it gives us the same following error prompt after QR scan.
Cannot create a work profile - The security policy prevents the
creation of a managed device because a custom os is or has been
installed on this device
For your kind information, there is no custom os installed on the device and the device is not rooted or bootloader is not unlocked. I have researched a lot over the internet but cannot find a solution to the problem I have tried following approaches but it doesn't seem to work in my case
To fix this, you will need to update the time on the device by either connecting to wifi or cellular data (insert SIM-card), or by manually changing it in the set-up screen. After this is done you will be able to provision the device.
Tried DPC Identifier method for enrollment, When prompted to sign in on fresh factory reset device, enter afw#setup, which downloads Android Device Policy. Scan a QR code or manually enter an enrollment token to provision the device.
None of the above seems to work for me, I have also seen that its an issue related to Samsung Knox version, so can anyone from Samsung or google help me debugging and solving this issue, will removing the Knox app from the device work in my case.
Eagerly awaiting for the response as most of my device has started getting affected with this issue, please let me know your thoughts and resolution on this.
Not sure if that's an option for you as you have multiple devices, but on my single device, manually downloading and installing "google apps device policy" resolved the issue.
Been a lurker for a while and posting for the first time
Work as IT helpdesk and found a fix for us (context below)
We use Azure, InTune and Samsung Knox
Needing to assign a Knox profile so an application installs and runs
How we fixed this
Unassigned Knox profile
Ran tablet normally, skipping setup of Google, Samsung account and security
Running Samsung updates until current (24th Feb 2021)
Reassign the Knox profile
Factory resetting through settings
run through the setup process
Error has stopped at this point
You can either use Wi-Fi or SIM Card Data for OS updates through Knox
I had the same problems and this is how i fixed it. I have Samsung Tablet Android 10 and need to set it up under Enterprise.
Straight out of the box, you expand the OS, set up Network connection and than type in the google gmail space: afw#mobicontrol. This Does Not install the custom OS. Once expanded the OS has all the bloated software in tact plus the Mobicontrol app. I kept getting an error 'Can't Create Work Profile because Custom OS is installed on this device'. I did a factory reset but did so by powering it off than using the Power Button and Up Arrow to force it to the Android Recovery Screen. There is a factory reset option to choose from. "This Does Not Work". It still keeps the bloated software in tact.
You need to expand the Android OS first than do a reset. Go to SETTINGS. than ABOUT. at bottom is a RESET option. Choose that. Choose Factory Reset. This will delete all those apps. It reboots. Now you can enter afw#mobicontrol at the google email screen and it will install the custom OS and works under Soti.
Reset From the SETTINGS and do a Factory Reset. Than type in AFW#MOBICONTOL and the custom OS will work.
I've read every StackOverflow that I could find on this issue, but I still can't work it out.
I'm trying to deploy an app to actual device (NOT emulator). But I receive the following error when i try to build:
Severity Code Description Project File Line
Error Error : DEP6100 : The following unexpected error occurred during bootstrapping stage 'Connecting to the device '30F105C9-681E-420b-A277-7C086EAD8A4E'.':
SEHException - External component has thrown an exception. App1
and
Severity Code Description Project File Line
Error Error : DEP6200 : Bootstrapping 'Device' failed. Device cannot be found. App1
It's worth mentioning that I went from Windows 7 to Windows 10. It's also worth mentioning that my computer was missing the IpOverUsbSvc.exe (not just the registry post, but the actual service was missing). Couldn't find any way to get this back so, so my colleague sent over the .exe and the DLLs and I placed it in it's location. And the service is now running and no longer gives any errors. My device is recognized by the PC, it's running Windows 10 Mobile (but I've also tried with a device running Windows 8.1).
Specs on PC:
Windows 10 Pro (Build 10240)
Using Visual Studio 2015
UWP Tools
Any suggestions to fix my nightmare? Thanks!
Steps that helped me. I have windows 10 mobile build 10581 (and now 10586) installed on phone
Turn off Developer mode on your phone.
Deploy app (UWP or SL) by VS2015 -> Error.
Turn on Developer mode on your phone.
Deploy app (UWP or SL) by VS2015 -> Working.
If you change another device or re-connect you must close VS2015, re-launch and do again!
Finally managed to find a solution to this illusive bug.
It seems that if I didn't have the Windows Phone 8.1 Tools installed I couldn't build to an ARM device (not even Windows 10 Mobile).
So my step to solve this was:
Go to Control Panel -> Programs and Features -> Microsoft Visual Studio ... 2015 -> Modify. And then select the Windows Phone 8.1 Tools.
Pretty pissed that one can't get a reasonable error message when things like this is missing.
I had this issue after updating my device to win10 ver:10.0.10581.0. I tried many things but finally after installing latest sdk and emulators i got it working. You may try installing from this page sdk and emulator:
https://dev.windows.com/en-us/downloads/windows-10-developer-preview
Somehow the new emulators were not visible in vs, they got visible after few restarts and then on device debugging started to work.
But one problem still remain from me that vs crashes after ending debug session with device.
desktop-->my computer--> right click--> management--> service--> start the service Windows Phone IP over USB Transport (IpOverUsbSvc) although maybe the starttype is set as automatic
Seems like there are many issues causing the same error message.
This one worked for me Windows Phone deploy Issue
Essentially you need to remove/uninstall the device from Windows. Then after unplugging and plugging back in, the device and drivers are reinstalled.
I tried many of the suggested solutions to no avail.
After changing the USB-C cable from a USB 3.1 port to a USB 2.0 port on my computer, the error goes away. YMMV
I see it is quite an old post...but I still get this problem. In my case, this happened after I deployed to a second phone I had for testing. After that, VS 2017 now only wants to deploy to that phone and not to the other phone no more. If I start another project, the other phone is recognized and deployable to (listed as device under debug).
Restarting system fixes this...
Also, if I add another project as reference (like a background task) to my project, I will loose the ability to select the devices and emulators under debug. VS 2017 simply then seems to deploy to the last device selected...(really no clue what this is). I have not been able to get the selection of emulators and devices back yet on this one. I only will have the "Start" and "Download new emulators" options. I think this has to do with the fact that VS maybe doesn't know the type (like arm/86/64) of the reference project because it is not set (not needed as this defies the purpose of referencing a project for dynamic references and not the compiled device specific file...)
Hope it helps someone ....
I uninstalled the existing version of the app in device and re-ran it and it worked for me
I got that error for a really simple reason...just opened a new solution I downloaded from GitHub, pressed F5, and got it!
I had left my build configuration in the default "Debug - ARM" setting, when I changed to "Debug - x64" it worked fine!
(Just adding another reason for completeness, not likely to affect your case!)
In case it's helpful for others... I got: DEP6701 bootstrapping failed ... access denied.
Thanks to comments here, I only dev-locked then dev-unlocked my phone (was originally dev-unlocked). Totally works now (took some time installing missing frameworks at first). All good.
Thanks
One more thing could be tried.
Uninstall the existing app if any and then deploy from Visual Studio.
Try on another usb port. It worked
I'm trying to deploy my first Windows Phone 8 app to my brand new Lumia 920, after getting everything up and running on the emulator, but I'm running into the following error during deployment:
1>------ Deploy started: Project: AudioFilteringPhone, Configuration: Debug ARM ------
1>Deploying C:\Users\<username>\Documents\Visual Studio 2012\Projects\AudioFiltering\AudioFiltering\Bin\ARM\Debug\AudioFiltering_Debug_ARM.xap...
1>Connecting to Device...
1>Optimizing for device...
1>Installing the application...
1>Deployment of application to device failed.
1>Error writing file '%FOLDERID_SharedData%\PhoneTools\11.0\Install\{29b31259-9af9-47a5-9891-c3098315d3d8}\AudioFiltering_Debug_ARM.xap'. Error 0x80070003: The system cannot find the path specified.
If I manually try to deploy using the Deployment tool, I get the same error. Does anyone know what the cause of this is and how to alleviate it? This happens even if I just start a new WP8 app and immediately try to deploy it, so it's something wrong with my environment, not my application configuration.
I had exactly the same problem, but solved it by simply rebooting the phone. No software updates were required.
It turns out that there were software updates that needed to be installed. If anyone knows a way to find out the names of the updates applied, I will post them here, otherwise all I can say is that I had to update to OS version 8.0.10211.204.
This also can be because of wrong USB cable or port. I have a long cable for charging which works with android devices, but doesn't with WP.
Or maybe using another USB port helped.
I am dealing with an issue that USB GSM modem throws an exception and is in the failed state until you SHUT DOWN and turn on the PC again.
The "restart" does not help, because it only flushes the memory (running on Windows XP, SP3 Pro.)
As I suspect, the problem might be solved when the USB's power goes off and on again.
But is there a way how to do it without shuting the whole PC down (Like remove and add the device in device manager)?
Also do you know how can I simulate this state? It happends randomely and I am unable to do it at my will.
Thanks
You say it is a USB device (i.e. not integrated). The only reliable way to re-power the device, apart from re-booting the PC, is to unplug and re-plug the device (which is quicker anyway).
There's a discussion here: http://social.msdn.microsoft.com/Forums/en-US/vcgeneral/thread/326d26e7-baa9-45b4-8234-321c9e5f8ffa/
The exception is happening in the device, and without knowing what causes it, you can't reliably reproduce it. Maybe the device vendor has some software that would help you collect its logs.
Couldn't register taxsmart.MapTest with the bootstrap server. Error: unknown error code.
This generally means that another instance of this process was already running or is hung in the debugger
I get this Error when I try to install my app on my Device.
I already tried restarting Mac and device.
Also tried cleaning the app and re-building. But did not work for me.
Also I tried refering to this link but didn't help me.
Bootstrap Server Error in Xcode IPHONE
What can be done?
I restarted my Mac and my device and it worked.
You didn't mention specifically, so I'll ask: Have you tried manually deleting the application from the device? Tap and hold its icon. When they begin to wiggle, hit the x in the upper-left of the icon and confirm deletion.