Hi friends ,I have question ,Is this possible to use two different tabbar class in the same app.
It mean I have Two tabbar controller in my app.
Like 1st is newtabcontroller.h & newtabcontroller.m
2nd is oldtabcontroller.h & oldtabcontroller.m
is possible to use two different tabbarcontroller in app.
thanks
why not?
But it should not be a tabbarcontroller inside another tabbarcontroller.
Have a TabbarManager class. Then on some condition, load
- FirstTabbarController or
- SecondTabbarController
All components and the UITabbarControllers themselves should be instantiated in the TabbarManager class.
Its init may have code like this, make similar for two tabbarcontrollers.
self.tabBarController = [[UITabBarController alloc] init];
self.controllers = [[NSMutableArray alloc] init];
// initialize the view controllers and navigation controllers for the tab bar
self.friendsVC = [[FriendsVC alloc] initWithNibName:#"FriendsView" bundle:nil];
UINavigationController *friendsNVC = [[UINavigationController alloc] initWithRootViewController: friendsVC];
friendsNVC.navigationBar.barStyle = UIBarStyleBlack;
[controllers addObject:friendsNVC];
[friendsNVC release];
self.paymentsVC = [[PaymentsVC alloc] initWithNibName:#"PaymentsView" bundle:nil];
UINavigationController *paymentsNVC = [[UINavigationController alloc] initWithRootViewController: paymentsVC];
paymentsNVC.navigationBar.barStyle = UIBarStyleBlack;
[controllers addObject:paymentsNVC];
[paymentsNVC release];
tabBarController.viewControllers = controllers;
tabBarController.selectedIndex = 0;
tabBarController.delegate = self;
self.view = tabBarController.view;
Related
I am using XCode 4.3 and I am creating a tab bar application following an example in my book (likely used for XCode version < 4.3).
By default the newly created tab-bar application includes 2 tabs. you can see my screenshot
And now I would like to add another tab (the TabExampleThirdViewControler as you also see in the image). But I don't know how to make it the third tab. My old book says that I need to link it to the MainWindow but as you see in the image, there is no MainWindow file at all.
This sort of update from new version of XCode pretty confuses a beginner like me. Thank you for any guidance you could offer.
I am not sure what approach you are follwoing to create tabs. But look at mine. I always create tabs like this. This is very easy to implement :
Appdelegate.h
UITabBarController *tabBarController;
// set properties
Appdelegate.m
// Synthesize
tabBarController = [[UITabBarController alloc] init];
tabBarController.delegate=self;
// Adding Search,Nearby,Map,AboutUs,Favorites Tabs to tabBarController
Search * search = [[Search alloc] init];
UINavigationController *searchNav = [[UINavigationController alloc] initWithRootViewController:search];
Nearby* nearby = [[Nearby alloc] init];
UINavigationController *nearbyNav = [[UINavigationController alloc] initWithRootViewController:nearby];
Map* map = [[Map alloc] init];
UINavigationController *mapNav = [[UINavigationController alloc] initWithRootViewController:map];
AboutUs* aboutUs = [[AboutUs alloc] init];
UINavigationController *aboutUsNav = [[UINavigationController alloc] initWithRootViewController:aboutUs];
Favorites* favorites = [[Favorites alloc] init];
UINavigationController *favoritesNav = [[UINavigationController alloc] initWithRootViewController:favorites];
NSArray* controllers = [NSArray arrayWithObjects:searchNav,nearbyNav,mapNav,aboutUsNav,favoritesNav, nil];
tabBarController.viewControllers = controllers;
[window addSubview:tabBarController.view];
Then in each of the view controllers mentioned above you need to implement
- (id)init {}
in which you can set Tab name and image.
I always follow this approach and it never fails. The tabs are always visible.
Hihi all,
I am pretty new in iPhone dev. I have follow some tutorial and created a tabbar application. Below is the code in the appdelegate implementation:
self.window = [[UIWindow alloc] initWithFrame:[[UIScreen mainScreen] bounds]];
UIViewController *viewController1 = [[ViewController1 alloc] initWithNibName:#"ViewController1" bundle:nil];
UIViewController *viewController2 = [[ViewController2 alloc] initWithNibName:#"ViewController2" bundle:nil];
self.tabBarController = [[UITabBarController alloc] init];
self.tabBarController.viewControllers = [NSArray arrayWithObjects:viewController1, viewController2, nil];
self.window.rootViewController = self.tabBarController;
[self.window makeKeyAndVisible];
Then set the title and the image for the tab in each of the controller implementation.
My problem is that, example, in my viewController1, I need to navigate to viewController3, when I use presentModalViewController method to push the viewController3 in, the tabbar at the bottom will be disappeared.
While I tried to use the app delegate to refer to my tabBarController, and use tabBarController.navigationController pushViewController method, my viewController3 is not being pushed, and seems nothing happens.
I have tried to follow a few tutorial, but it's all required to drag in the navigationcontroller into the MainWindow.xib, which, in the xcode 4, MainWindow.xib doesn't exist anymore. How can i create the navigationcontroller from code so that the app can navigate between different view without hiding the tabbar?
Any comment is very much appreciated! Thanks in advance!
:)
If you want to use a navigation controller, you need to create a navigation controller. Since you're not using a XIB, you'll have to create it manually.
Since you want the tab bar to remain visible when you present viewController3, you need to make the navigation controller a child of the tab bar controller.
UIViewController *viewController1 = [[ViewController1 alloc] initWithNibName:#"ViewController1" bundle:nil];
UINavigationController *navController1 = [[UINavigationController alloc] initWithRootViewController:viewController1];
UIViewController *viewController2 = [[ViewController2 alloc] initWithNibName:#"ViewController2" bundle:nil];
self.tabBarController = [[UITabBarController alloc] init];
self.tabBarController.viewControllers = [NSArray arrayWithObjects:
navController1,
viewController2,
nil];
Then when you want to present viewController3, do this:
// in some method of viewController1
[self.navigationController pushViewController:viewController3 animated:YES];
I am not very Sure but have you tried this??? Actually i am going to use XCode 4 soon, i am still using 3.2.8 version:-
WebViewController *viewController = [[WebViewController alloc]initWithNibName:#"WebViewController" bundle:nil];
viewController.modalTransitionStyle = UIModalTransitionStyleFlipHorizontal;
[self presentModalViewController:viewController animated:YES];
[viewController release];
See in this also the Tab bar will be removed when you navigate to your 3rd screen, you have to provide the navigation bar to come back.
Hope it helps.. :)
I've been stuck trying to puzzle this out for a couple days now, and I'll admit I need help.
The root view controller of my application is a tab bar controller. I want to have each tab bar a different navigation controller. These navigation controllers have completely different behavior.
So how do I set this up in terms of classes? Per Apple's documentation, I'm not supposed to subclass UINavigationViewController. So where do I put the code that drives each of these navigation controllers? Does it all get thrown in App Delegate? That would create an impossible mess.
This app should run on iOS 4.0 or later. (Realistically, I can probably require iOS 4.2.)
This is taken from one of my applications. As you say, you are not supposed to subclass UINavigationController, instead you use them as they are and you add viewcontroller on the UINavigationController's. Then after setting the root viewcontroller in each UINavigationController, you add the UINavigationController to the UITabBarController (phew!).
So each tab will "point" to a UINavigationController which has a regular viewcontroller as root viewcontroller, and it is the root viewcontroller (the one you add) that will be shown when a tab is pressed with a (optional) navigationbar at top.
UITabBarController *tvc = [[UITabBarController alloc] init];
self.tabBarController = tvc;
[tvc release];
// Instantiates three view-controllers which will be attached to the tabbar.
// Each view-controller is attached as rootviewcontroller in a navigationcontroller.
MainScreenViewController *vc1 = [[MainScreenViewController alloc] init];
PracticalMainViewController *vc2 = [[PracticalMainViewController alloc] init];
ExerciseViewController *vc3 = [[ExerciseViewController alloc] init];
UINavigationController *nvc1 = [[UINavigationController alloc] initWithRootViewController:vc1];
UINavigationController *nvc2 = [[UINavigationController alloc] initWithRootViewController:vc2];
UINavigationController *nvc3 = [[UINavigationController alloc] initWithRootViewController:vc3];
[vc1 release];
[vc2 release];
[vc3 release];
nvc1.navigationBar.barStyle = UIBarStyleBlack;
nvc2.navigationBar.barStyle = UIBarStyleBlack;
nvc3.navigationBar.barStyle = UIBarStyleBlack;
NSArray *controllers = [[NSArray alloc] initWithObjects:nvc1, nvc2, nvc3, nil];
[nvc1 release];
[nvc2 release];
[nvc3 release];
self.tabBarController.viewControllers = controllers;
[controllers release];
This is how I go from one viewcontroller to another one (this is done by tapping a cell in a tableview but as you see the pushViewController method can be used wherever you want).
(this is taken from another part of the app)
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath {
if (self.detailedAnswerViewController == nil) {
TestAnsweredViewController *vc = [[TestAnsweredViewController alloc] init];
self.detailedAnswerViewController = vc;
[vc release];
}
[self.navigationController pushViewController:self.detailedAnswerViewController animated:YES];
}
The self.navigationcontroller property is of course set on each viewcontroller which are pushed on the UINavigationController hierachy.
Good Morning Guys/Girls
I am very new at programming for the iPhone, i have done alot of examples. I can create tabview project successfully and tableviews opening from SQL.
However i am finding it very difficult to try and put them all together, i am not sure i am getting the delegates very well.
I would like to ask someone if possible to please please help me with this problem to try and understand this better.
What i am trying to do exactly is have a TabView Project, each tab would have a navigationcontroller page (so a table with say search on top, and table view) the data is being populated either from sqllite3 or datacore.
Thats it.
it seems simple enough, but i am sorry, i need to see a working example to see how these multiple controllers are being loaded. Do you delegate each in a different class? please if someone can make an example to so i can load it and see.
thank you
Eden
I always prefer creating complex multiviews through coding.
You need to start with view based application. And then create a UITabbarController in you appDelegate file.
Appdelegate.h
UITabBarController *tabBarController;
// set properties
Appdelegate.m
// Synthsize
tabBarController = [[UITabBarController alloc] init];
tabBarController.delegate=self;
//Adding Search,Nearby,Map,AboutUs,Favorites Tabs to tabBarController
Search * search = [[Search alloc] init];
UINavigationController *searchNav = [[UINavigationController alloc] initWithRootViewController:search];
Nearby* nearby = [[Nearby alloc] init];
UINavigationController *nearbyNav = [[UINavigationController alloc] initWithRootViewController:nearby];
Map* map = [[Map alloc] init];
UINavigationController *mapNav = [[UINavigationController alloc] initWithRootViewController:map];
AboutUs* aboutUs = [[AboutUs alloc] init];
UINavigationController *aboutUsNav = [[UINavigationController alloc] initWithRootViewController:aboutUs];
Favorites* favorites = [[Favorites alloc] init];
UINavigationController *favoritesNav = [[UINavigationController alloc] initWithRootViewController:favorites];
NSArray* controllers = [NSArray arrayWithObjects:searchNav,nearbyNav,mapNav,aboutUsNav,favoritesNav, nil];
tabBarController.viewControllers = controllers;
[window addSubview:tabBarController.view];
You can accordingly manage in which tab you want to place navigation controller or only a view controller.
Then in each of the view controllers mentioned above you need to implement
- (id)init {}
in which you can set Tab name and image.
I currently have a UINavigationController in my app delegate where I push a ViewController on to login. If the login is successful I want to then create a UITabBarController with a Navigation Controller as the first Tab whose root controller is a UIViewController that I am creating.
The RootViewController of my first UINavigationController is actually acting as a delegate to the logincontroller so if a user logs in correctly it calls a method in my RootViewController which is where I would then like to push a UITabBarController onto the stack. Here is my code:
UITabBarController *tbController = [[UITabBarController alloc] init];
FileBrowserViewController *fileController = [[FileBrowserViewController alloc] init];
fileController.pathToFileDB = pathToDBUnzipped;
fileController.parentId = #"0";
UINavigationController *navController = [[UINavigationController alloc]initWithRootViewController:fileController];
NSMutableArray *aViewControllersArray = [[NSMutableArray alloc] initWithCapacity:2];
[aViewControllersArray addObject:navController];
[navController release];
[tbController setViewControllers:aViewControllersArray];
[self.navigationController pushViewController:tbController animated:YES];
[tbController release];
Now, it is all working fine. Except 2 things. Here is the screen shot:
1) I can't see any uitabbar items. How do i set an image and the text for each tab?
2) I don't want that top black bar. I only want 1 bar ontop with the undo button. How do I remove the additional bar?
I always follow this approach when I have both a UINavigationController and a UITabbarController:
You need to start with a view based application. And then create a UITabbarController in your appDelegate file.
Appdelegate.h
UITabBarController *tabBarController;
// set properties
Appdelegate.m
// Synthesize
tabBarController = [[UITabBarController alloc] init];
tabBarController.delegate=self;
// Adding Search,Nearby,Map,AboutUs,Favorites Tabs to tabBarController
Search * search = [[Search alloc] init];
UINavigationController *searchNav = [[UINavigationController alloc] initWithRootViewController:search];
Nearby* nearby = [[Nearby alloc] init];
UINavigationController *nearbyNav = [[UINavigationController alloc] initWithRootViewController:nearby];
Map* map = [[Map alloc] init];
UINavigationController *mapNav = [[UINavigationController alloc] initWithRootViewController:map];
AboutUs* aboutUs = [[AboutUs alloc] init];
UINavigationController *aboutUsNav = [[UINavigationController alloc] initWithRootViewController:aboutUs];
Favorites* favorites = [[Favorites alloc] init];
UINavigationController *favoritesNav = [[UINavigationController alloc] initWithRootViewController:favorites];
NSArray* controllers = [NSArray arrayWithObjects:searchNav,nearbyNav,mapNav,aboutUsNav,favoritesNav, nil];
tabBarController.viewControllers = controllers;
[window addSubview:tabBarController.view];
You can accordingly manage in which tab you want to place navigation controller or only a view controller.
Then in each of the view controllers mentioned above you need to implement
- (id)init {}
in which you can set Tab name and image.
I always follow this approach and it never fails. The tabs are always visible. You can make changes according to your code.
to hide the above black bar use -
[self.navigationController setNavigationBarHidden:TRUE];
to set tab bar item use -
for system item -
UITabBarItem *firstItem = [[UITabBarItem alloc] initWithTabBarSystemItem:UITabBarSystemItemFavorites tag:0];
for custom item -
UITabBarItem *firstItem = [[UITabBarItem alloc] initWithTitle:#"title" image:[UIImage imageNamed:#""] tag:0];
[navController setTabBarItem:firstItem];
Here is a good video on how to combine Tab Bar, Navigation Bar, and/or Table Views.
http://www.youtube.com/watch?v=LBnPfAtswgw
If you don't want you sign-up screen to have a Tab Bar controller, then you will have to present it as a modal view (since the tab bar is your root view controller). This can be done through the presentModalViewController:animated: method. You can find info about that at:
http://developer.apple.com/library/ios/#featuredarticles/ViewControllerPGforiPhoneOS/ModalViewControllers/ModalViewControllers.html%23//apple_ref/doc/uid/TP40007457-CH111-SW1
I hope that helps. Let me know if you have any other questions!
Cheers, Evan.
hi friend that top bar is status bar . You can set.statusbar hidden = yes;
or change it from plist , when you open your plist there is a option to hide it,