when i enter a value in the iphone simulator and press the save button it only keeps the value until the simulator is running. and when i restart the simulator and press the load button it shows an earlier value entered by me.i.e, it is not able to keep the new value and keeps only old value.
i am using following loops for saving a file and loading a file.
-(IBAction) save{
NSUserDefaults *sinner=[NSUserDefaults standardUserDefaults];
[sinner setObject:serverIP.text forKey:#"load"];
NSUserDefaults *king=[NSUserDefaults standardUserDefaults];
[king setObject:noc.text forKey:#"save"];
}
-(IBAction) load {
NSUserDefaults *sinner=[NSUserDefaults standardUserDefaults];
NSString *tempstring =[sinner stringForKey:#"load"];
serverIP.text = [NSString stringWithFormat:tempstring];
NSUserDefaults *king=[NSUserDefaults standardUserDefaults];
NSString *tempstring1 =[king stringForKey:#"save"];
noc.text = [NSString stringWithFormat:tempstring1];
}
// Your code
NSUserDefaults *king= [NSUserDefaults standardUserDefaults];
[king setObject:bookmarks forKey:#"Bookmarks"];
// saving it all
[king synchronize];
-(IBAction) save{
NSUserDefaults *sinner=[NSUserDefaults standardUserDefaults];
[sinner setObject:serverIP.text forKey:#"load"];
[sinner setObject:noc.text forKey:#"save"];
[sinner synchronize];
}
This should save the contents. You dont need two separate userdefaults. To load them you can try
-(IBAction) load {
NSUserDefaults *sinner=[NSUserDefaults standardUserDefaults];
NSString *tempstring =[sinner stringForKey:#"load"];
serverIP.text = tempstring;
NSString *tempstring1 =[sinner stringForKey:#"save"];
noc.text = tempstring1;
}
Hope this helps
Related
How I can save value in TextField for showing after closing and opening app?
self.suma.text = [NSString stringWithFormat:#"%d", [self.a1.text intValue]+[self.a2.text intValue]];
I want to do it with "suma".
See documentation for NSUserDefaults.
NSUserDefaults *defaults = [NSUserDefaults standardUserDefaults];
// Write
[defaults setObject:self.suma.text forKey:#"suma"];
// Read
self.suma.text = [defaults stringForKey:#"suma"];
This question already has answers here:
Closed 10 years ago.
Possible Duplicate:
How can I reset the NSUserDefaults data in the iPhone simulator?
In my project i am saving some values in NSUserdefaults with different keys.And i have reset button in my app when i click that button values stored in user defaults should remove.Is there any way to delete those values without keys,and is addSuitedNamed: and removeSuitedName can use in this scenario.
NSUserDefaults * myNSUserDefaults = [NSUserDefaults standardUserDefaults];
NSDictionary * dict = [myNSUserDefaults dictionaryRepresentation];
for (id key in dict) {
//heck the keys if u need
[myNSUserDefaults removeObjectForKey:key];
}
[myNSUserDefaults synchronize];
or
[NSUserDefaults resetStandardUserDefaults];
[NSUserDefaults standardUserDefaults];
With a selector being called on a button click you can achieve the same using
- (IBAction)btnResetUserDefaultsPressed:(id)sender {
NSUserDefaults* userDefaults = [NSUserDefaults standardUserDefaults];
NSDictionary* dictUserDefaults = [userDefaults dictionaryRepresentation];
for (id akey in dictUserDefaults) {
[userDefaults removeObjectForKey:akey];
}
[userDefaults synchronize];
}
For the second part of your question asked , You would certainly find this useful.
You can reset the values of NSUserDefault using resetStandardUserDefaults.
Check this code:
[NSUserDefaults resetStandardUserDefaults];
[NSUserDefaults standardUserDefaults];
Also you can:
NSString *appDomain = [[NSBundle mainBundle] bundleIdentifier];
[[NSUserDefaults standardUserDefaults] removePersistentDomainForName:appDomain];
Or you can use:
NSUSerDefaults *default = [NSUserDefaults standardUserDefaults];
NSDictionary *dictionary = [default dictionaryRepresentation];
for (NSString *key in [dictionary allKeys])
{
[default removeObjectForKey:key];
}
[default synchronize];
I'm trying to create an application, and in that I'm receiving some contents from net and loading into and array, if I quit and run the app again i'm losing the data. How can I store the data in the app itself. Should I use some kind of database? If so which one and how can I implement that? I need to store only some string variables.
EDIT:
My app is tabbar based app, and have two tabs. Loading the arrays in one tab and loading that array in a table in the other VC. once I load the array and move to the second tab, the table is loaded with the array. If i go back and add few more values and then if i check, the added datas is not displayed in the table. And also, when I quit the app the table lose all the values, I need to keep the values in the table, even after i quit the app. How can I do that?
here is my code:
in viewdidload:
NSUserDefaults *simplePlistDb = [NSUserDefaults standardUserDefaults];
[simplePlistDb setBool:YES forKey:#"isItWorking"];
[simplePlistDb setObject:alertList forKey:#"myArray"];
[simplePlistDb synchronize];
in cellforrowatindexpath:-
NSUserDefaults *simplePlistDb = [NSUserDefaults standardUserDefaults];
BOOL flag = [simplePlistDb boolForKey:#"isItWorking"];
if (flag)
{
NSArray *myArray = [simplePlistDb objectForKey:#"myArray"];
for (NSString *str in myArray){
NSLog(#"Str:%#", str);
[loadArray addObject:str];
}
cell.textLabel.text = [loadArray objectAtIndex:indexPath.row];
}
Thank you.
You will want to look into Core Data if you want to save a decent amount of data to the iPhone. However, if not, you can just load the items in the array into a plist and load them from there at launch.
Plist Writing: How to create a new custom property list in iPhone Applications
CoreData: http://www.raywenderlich.com/934/core-data-tutorial-getting-started
Edit--->
As Nekto said, you can also use NSUserDefaults, but I advise mainly using NSUserDefaults for simple NSStrings and integers.
I think for your purposes NSUserDefaults will be enough : NSUserDefaults Class Reference.
Examples:
// save
NSUserDefaults *simplePlistDb = [NSUserDefaults standardUserDefaults];
[simplePlistDb setBool:YES forKey:#"isItWorking"];
[simplePlistDb setObject:[NSArray arrayWithObjects:#"very", #"cool", nil]];
[simplePlistDb synchronize];
// restore
NSUserDefaults *simplePlistDb = [NSUserDefaults standardUserDefaults];
BOOL flag = [simplePlistDb boolForKey:#"isItWorking"];
if (flag)
{
NSArray *myArray = [simplePlistDb objectForKey:#"myArray"];
for (NSString *str in myArray)
NSLog(#"%#", str);
}
You can use NSUserDefaults in order to store your data till the time your app is installed in your device.
How to write in NSuserDefaults:
NSUserDefaults *defaults = [NSUserDefaults standardUserDefaults];
[defaults setObject:#"yourObject1" forKey:#"correspopndingKey1"];
[defaults setObject:#"yourObject2" forKey:#"correspopndingKey2"];
[defaults synchronize];
How to read from NSuserDefaults:
NSUserDefaults *defaults = [NSUserDefaults standardUserDefaults];
NSString *temp1 = [defaults objectForKey:#"correspopndingKey1"];
NSString *temp2 = [defaults objectForKey:#"correspopndingKey2"];
You can store NSArray in a similar way.
NSUserDefaults *defaults = [NSUserDefaults standardUserDefaults];
[defaults setObject:objArray forKey:#"correspopndingKey"];
[defaults synchronize];
I trying to save UILabel value to NSUserDefaults. I did IBAction with this code:
-(IBAction)saveData:(id)sender {
NSString *resultString = label.text;
NSUserDefaults *prefs = [NSUserDefaults standardUserDefaults];
[prefs setObject:resultString forKey:#"result"];
[prefs synchronize];
}
Then, I connect it to button with Touch Up Inside.
What log shows after I pressed the button:
result = 0;
When I pressed a second time, then it works.
result = "28.34";
What I'm doing wrong and how can I retrieve a result?
EDIT
With this code I display result in log. I put it to same action.
NSLog(#"%#", [[NSUserDefaults standardUserDefaults] dictionaryRepresentation]);
Your code looks correct, so the issue is probably not the function you posted but rather the code that contains your NSLog. You might be logging the value in a way that misses the first time it gets set.
Your log statement should be
NSLog(#"%#",[[NSUserDefaults
standardUserDefaults]
objectForKey:#"result"]);
This should be after you set the object in NSUserDefaults.
Add this to your applicationDidFinishLaunching in appDelegate or in init method in viewController(you have to create one) :
NSUserDefaults *prefs = [NSUserDefaults standardUserDefaults];
if(prefs == nil)
{
[prefs setObject:#"anything" forKey:#"result"];
[prefs synchronize];
}
I have the following code in my initialization (first time) of my app:
NSUserDefaults *defaults = [NSUserDefaults standardUserDefaults];
NSString *uid=#"1";
[defaults setObject:uid forKey:#"init_val"];
[defaults synchronize];
Much later in the code (in response to a button press) I check the value using:
NSUserDefaults *defaults = [NSUserDefaults standardUserDefaults];
NSString *initVal=[defaults objectForKey:#"init_val"];
initVal is always nil. I have checked and init_val is set up exactly the same in my settings bundle as another field that I can set and read from without issue (they are both set up with a single field named "Key".
#mlewis54:
You can try this code. I am very sure that it will work for you.
NSUserDefaults *defaults = [NSUserDefaults standardUserDefaults];
NSString *uid=#"1";
[defaults setObject:uid forKey:#"init_val"];
[defaults synchronize];
For Retrieving Data You Should Use The Following Code :
NSString *initVal=[[NSUserDefaults standardUserDefaults] valueForKey:#"init_val"];
OR
NSString *initVal=[[NSUserDefaults standardUserDefaults] objectForKey:#"init_val"];
EDIT:
If still it gives nil, then you can use the following code:
NSString *initVal=[NSString stringWithFormat:#"%#",[[NSUserDefaults standardUserDefaults] valueForKey:#"init_val"]];
OR
NSString *initVal=[NSString stringWithFormat:#"%#",[[NSUserDefaults standardUserDefaults] objectForKey:#"init_val"]];
Hope this helps you.
Decelare this at an event on click of button ...
NSUserDefaults *savedData = [NSUserDefaults standardUserDefaults];
[savedData setObject:userEmailTextField.text forKey:#"userid"];
and on load load the data and check the value you have entered is showing or not...
userEmailTextField.text =[[NSUserDefaults standardUserDefaults]objectForKey:#"userid"];
You need to use the line
NSString *initVal = [defaults stringForKey:#"init_val"];
- since it's a String you must use stringForKey. You can similarly use boolForKey to get a boolean value.
There's nothing wrong in your code, i tried to copy it in my project and it worked good,
so your error could be probably when you check initVal...
what's the code you use to see if initVal is nil?
and are you sure that when/where you check initVal, that var/oblect is still visible ?
try to insert this immediately after your reading code:
NSLog(#"____text read in pref: %#", initVal);
it writes this in my console window -> __text read in pref: 1
of course it's an NSString, i hope you keep it in mind it's not an int or a NSNumber when you check it...
luca
It might be that the initialisation isn't happening. Put an NSLog in there to check it's executed.
It works fine for me with the same code:
NSUserDefaults *defaults = [NSUserDefaults standardUserDefaults];
NSString *uid=#"1";
[defaults setObject:uid forKey:#"init_val"];
[defaults synchronize];
NSUserDefaults *defaultss = [NSUserDefaults standardUserDefaults];
NSString *initVal=[defaultss objectForKey:#"init_val"];
NSLog(#"Value of initVal: %#",initVal);
O/P on console: Value of initVal: 1
So try to do it with the same code with print on console.
Are you sure you properly initialize NSUserDefaults? When I initialize, in my app delegate, I always create the default user defaults by creating a dictionary of the default values then:
[[NSUserDefaults standardUserDefaults] registerDefaults:appDefaults];
Where appDefaults is the dictionary. Then you should be able to access them correctly.