This may be a very basic question. But it is not very clear to me, the difference between
setItemCountPerPage and setPageRange. The zend manual defines both as below. I don't see a difference on reading it. Could someone tell how they are different, may be in the context of actual usage. Thanks
setItemCountPerPage : Sets the maximum number of items to display on a page (default 10).
setPageRange : Sets the number of items to display in the pagination control (default 10). Note: Most of the time this number will be adhered to exactly, but scrolling styles do have the option of only using it as a guideline or starting value (e.g., Elastic).
setItemCountPerPage refers to the ACTUAL DATA you are paginating.
setPageRange refers to the PAGINATION CONTROLS (the little HTML snippet with links to the other pages). Check out the different pagination styles in your pagination controls and it will become very obvious what this is.
You can really use one without the other though they work together so well that I usually see no point in separating them.
Related
I have two Shape Data rows for a Shape's ShapeSheet:
Shape Data Label Prompt Type Format Value Invisible
Prop.Type "Type" "" 4 "Alpha;Beta;Gamma;Delta;Epsilon;Zeta;Eta;Theta;Iota;Kappa" INDEX(4,Prop.Type.Format) False
Prop.Abbrev "Abbrev" No Formula 4 "A;B;G;D;E;Z;E;T;I;K" INDEX(4,Prop.Abbrev.Format) True
The way I intent to use this is to have the user select the Type, say Epsilon, and then have the Abbrev automatically switch to the corresponding value in the Prop.Abbrev.Format.
Note: the values used here are placeholders for the actual values for my application, which are not shown here so they don't distract from the real answer I need, how to keep the selections in sync when the first one is chosen or changed.
Thanks for any help you can give!
I don't have Visio on this machine, so I am unable to copy and paste a working solution. The approach gets a little complicated, but extremely flexible.
Save your lists in the User section, rather than Prop - this then becomes underlying data for use in properties. If you are using a master stencil then this also helps with managing the fields.
You can now store an index in your data as well - this index points to the appropriate values in your arrays. You can use Actions and side menus to set the index which, when referenced properly, means you can have the full name and/or abbreviation in the side menu and the ShapeSheet does all the work underneath.
The functions you want to look at are:
Index (e.g. INDEX(1,User.Type) will return "Beta". (0-based)
Lookup (e.g. LOOKUP("D", User.Abbrev) will return "3". (0-based)
GetAtRef
SetAtRef
SetAtRefExpr
SetF
I had a similar business problem which relied on setting a background colour based on the value of shape data. Your final solution could end up including formulas like this: =SETF(GetRef(Prop.Type),"GUARD(INDEX(LOOKUP(Prop.X,Prop.X.Format),User.Type))").
For more in-depth discussion - check out https://superuser.com/questions/1277331/fillforegnd-in-shapesheet-using-wrong-data and the extended discussion at http://visguy.com/vgforum/index.php?topic=8205.15 - the latter link also includes an example file with working shapesheets (well, working to the extent that they exposed my problem).
In Articulate's Storyline product, how does one retrieve the total number of slides (or pages) in a storyfile or project?
There's not much documentation so it's kind of hard to figure out how to query common environment values like this. If we can get the total number of slides then we don't have to manually set a value for it.
One must manually set and update a variable to store the number of slides.
The most lengthy conversation on the matter seems to be found here at the Articulate forums.
In that thread the users and staff describe the need to manually define such a variable.
I asked the question on the official forum more directly here, and so far have not received a response.
Another poster at that forum mentioned using PHP to solve this problem, but unfortunately we can't add the requirement of PHP to the final product. I'm sure some server side language tricks might be used to solve this issue, but that also adds the dependency of a particular server-side language.
The Answer Mark gave is correct. So if you want to track the number of question slides in a quiz you would either hard code the value in a variable such as totalQuestions, or increment it as you go through each slide using adjust variable trigger. To call that value and display it on screen you would just add it to a text field and surround it with "%".
EG. "You have answered %Results.ScorePoints% out of %totalQuestions% questions correctly."
I find it rather pointless to hard code it since it's just as easy to put the value in the text field at the end. Using the increment method seems more logical because then you can add more question slides without having to adjust the variable or results screen each time.
I usually load frame.xml, browse for all slidelink tags and sort all slides by their Id.
Usually you get something like slideid=_player.5xoxGTW6QCh.6bmeRt3tCqP, where 5xoxGTW6QCh is the scene id and 6bmeRt3tCqP is the slide id. displaytext also gives you the slide title.
If you browse for slidetranscript and match the Id for each transcript you also get the slide notes.
Articulate 360 now has an internal (Built-in) variable for this and other counts. See Project.TotalSlides and Menu.TotalSlides
See https://community.articulate.com/series/articulate-storyline-360/articles/storyline-360-add-slide-numbers
What I'm aiming to do!
I'm creating a template for a site in typo3, and i'd like to get rid of typo3's default content zones, and replace them with my own.
I.E. On the page menu.
to remove left, content, border
and to keep/add. Header. Main. Right.
The problem!
I've found snippets around the web, and bluntly, what I'm expecting to happen, isn't happening. Where every post seems to be "Thank you, great success! ++", the code I paste isn't throwing any errors, and isn't doing anything, well, at all.
My attempt
Via the typo3 documentation http://typo3.org/documentation/snippets/sd/24/
I call mod.SHARED.colPos_list in order to choose the three sections to display
t3lib_extMgm::addPageTSConfig('
mod.SHARED.colPos_list = 0,1,3
');
And I edit the TCA in extTables.php to set them to my specs.
$TCA["tt_content"]["columns"]["colPos"]["config"]["items"] = array (
"1" => array ("Header||Header||||||||","1"),
"0" => array ("Main||Main||||||||","0"),
"3" => array ("Right||Right||||||||","3"),
);
extTables.php is being called as as a die(); cuts the page.
I've cleared the cache and deleted typo3temp, logged out and in again.
But nothing happens.
My main guess, is, is this feature anything to do with templavoila? I removed it as I felt like trying out the new(er) typo3 fluid templating system, and didn't feel that I needed a GUI editor.
Any ideas?
Well - the more pages and content elements you got the more problems you will have to face when using TemplaVoila. Having comma separated values in XML structures saved to a single database field will be a performance killer as soon as you want to collect content from more than one page (uncached teaser menus or the like). Handling of references and "unused elements" is questionable as well. Of course it will work for small to medium sites, but concept wise a clean approach looks different.
Backend layouts are available since TYPO3 4.5 and work flawlessly since they just represent a normalized relation between elements and pages based on colPos. If you need more, Grid Elements will take this principle to the next level, offering even nested structures but still based on normalized relations, which will make your life much easier when it comes to DB cleaning and other maintenance tasks.
Find an introduction to backend layouts here: http://www.youtube.com/watch?v=SsxfNd4TYbk
Instead of removing default columns you can just rename them...
TIP: Use TemplaVoila extension for templating, you'll find much more flexibility there.
I'm probably biting off more than I can chew with this particular problem, but I'll try to be as specific as possible in case it's within my scope. Disclaimer: I'm not terribly experienced with MS Word, beyond simple data entry/some formatting, and I have absolutely zero experience working with macros or VBasic. Unfortunately, I'm afraid the solution to my problem will come in the form of one of those last two.
THE GOAL:
What I want to do is to have placeholder text throughout my template document that will change content but not formatting when the first instance of it is changed. Basically, I'm writing a template for support manuals for a software suite. Each app has certain similar features like the menu bar, data entry screen, diagnostic log screen, transaction history, etc., so I am pre-writing those sections and using placeholders when I need to insert certain app specific properties.
I started off using the Insert->Quick Parts->Document Property->Subject tool which I used as a placeholder for the app name. I set the Property to [Subject] and then used Insert->Quick Parts->Field->Subject throughout the document, wherever I needed to include the app name. This worked fine in this case because the app name will always be capitalized. I simply change the text in the first [Subject] (which is content controlled) and update the fields throughout the document, and they all match nicely, easy-peasy, work done, go home and drink beer, right?
Not quite.
Our software handles part tracking via scanners and SQL Server, so while the interface and menu in the apps remains largely unchanged, the parts they track change from app to app. Because of this, I need to change the part name when I reference it within the text of the manuals; for example, if I'm working in ToiletPap.app and our TP is tracked by the roll, I need every mention of [Component] to be changed to roll. If I'm working in LightBulbs.app, I need [Component] to say bulb.
My first efforts went toward creating a custom doc property called Component using the Advanced tab under the Document Properties dropmenu. I then created a plaintext content control around my first [Component] titled Component and made my next [Component] a field with modified code: {COMPONENT * MERGEFORMAT}. This comes from copying what I can find when [Subject] works. This didn't work at all; updating the text in the first CC doesn't change the Content doc prop, and my fields return "!Undefined Bookmark, COMPONENT".
I got close to what I need by using the [Comments] doc property, set initially to [Component]. I used it just like [Subject], but (this is when I realized that capitalization was going to be an issue) when I mention my [component] in-text, as often as not, I need to to be lowercase instead of upper.
I've looked on MS's forums and a few others as well as here on SO, and I can't find anyone who's trying to do the same thing, much less an answer to how. Please keep in mind when answering, it would be a great help to me if you would include step-by-step instructions on how to enter/implement the code you provide because, as I mentioned, I have no idea how to go about editing macros/VBasic for MS Word.
To restate and summarize my overall question: How can I use a placeholder that displays the text "[Component]" so that, when I change the first instance of [Component] to something else, say "hopper", every subsequent instance of [Component] is updated to hopper but maintains its current capitalization and formatting scheme?
Apologies for the length of the request, but I wanted to make sure I explained the situation as accurately as possible. Thanks in advance for your consideration and responses.
I managed to solve this one after a couple extra hours of tinkering. I didn't need macros or VBasic, either.
On the first instance of [component] I created a plain-text content control to act as a container (not a necessity, but it makes it look nicer. Will likely cause a problem eventually, but for now, it's working as intended) and bookmarked it. Then, for all other instances of [container] I selected each and used Insert->Quick Parts->Field->Ref with the following field code:
REF Text1 \*Lower
Where "Text1" is my bookmark and "*Lower" indicates all lower case. The *Lower can be replaced with *Upper or *FirstCap to indicate all upper case or capitalize the first letter respectively. Now, each field reflects the text of the first with the capitalization appropriate to each field's location within the document. Just like using the doc prop with [Subject], ^a -> f9 is needed to update all fields within the document.
I want to create a grid with a RowExpander. The problem I am facing is that each row has different information to be displayed in the expanded area. For example, each row represents a subject and the expanded area displays the grades related to this subject (exam1, exam2, etc.) as follows:
+math
exam1 Excellent
exam2 Very Good
The problem is that i can't predict the number of grades (exams) each subject has, so a fixed template will not work in this case.
What is the best way to deal with such a case?
Note: if there is anything unclear in the question please ask. Thank you.
You actually have several options.
There is the Extended RowExpander that allows complexs widgets : GXT Widget expander
Or you could use and XTemplate with a nested TPL to iterate over the exams as per :
(I know that thread is for ext-js but the same principles apply to GXT XTemplates)
Advanced XTemplate features