How can I hide the keyboard after the user presses 'Done', or taps the UITextField?
I have put this code in the AppDelegate:
- (BOOL)textFieldShouldReturn:(UITextField *)textField {
[textField resignFirstResponder];
return NO;
}
And I have linked the UITextField delegate in IB to the File's Owner..
What am I doing wrong?
EDIT: Changin return NO -> return YES does nothing. I have IB open and clicking on file's owner -> connections tab, there are multiple referencing outlets all pointing to the UITextfields. It still isn;t working..
UPDATE:
I added this to my function:
- (BOOL)textFieldShouldReturn:(UITextField *)textField {
[textField resignFirstResponder];
int i = 5;
NSLog(#"%d", i);
return YES;
}
Nothing is getting printed to the console when I press return after setting focus to the textfield...So it's not calling the function. Have I connected something up incorrectly? I have the return key acting as 'Done'too, not sure if that makes a difference?
UPDATE:
I had my testfieldShouldReturn function in my AppDelegate instead of my viewcontroller. My mistake....Thanks for your help guys
Your code looks good. Can you make sure that you do have the delegate connection set up correctly? Try adding an NSLog to the delegate method to see if it is even being called.
...
Your question update points to this definitely being a connection issue. Try what Vince suggests and set the delegate explicitly in code. You'll probably want to do this in the viewDidLoad method of your view controller to ensure that the textField has actually been loaded before you set its delegate. Post back about whether that works.
Just set your app delegate as the delegate of your UITextField.
[textField setDelegate:self];
Set it in the -(BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions; method of your app delegate.
Since you want the textfield to return. You should return YES; instead of NO.
In your .h
-(IBAction)hideKeyboard:(id)sender;
In your .m or .mm
-(IBAction)hideKeyboard:(id)sender {
[(UITextField*)sender resignFirstResponder];
}
Then just link them in Interface builder to your text field's "Did End On Exit" event.
Replace return NO; with return YES;.
This works in my code.
EDIT: I was wrong. The return value is not the problem here. The keyboard should hide when you call resignFirstResponder.
Hope this video tutorial will help you..
http://www.thenewboston.com/?p=1368&pOpen=tutorial
Call that textFieldShouldReturn function on return key Press to do this:
1) right click text field from where the key board pops up.
2) Select first option "Did end on exit".
3) Drag blue line to files owner and you will have an option to select "hideKeyboard" function option
And you are done.
Related
In my iPad app there are 3 textboxes where i am using popoverview controller on second text box.
here their are 2 cases
In First Case:
As i finish editing the first textbox and click the next button on keyboard that time the keyboard is resigning perfectly and the popoverview controller is opened on second text box.Here i had written the code when the next button of the first textbox click at that time the second textbox should became FirstResponder.
In Second Case:
Here the actual problem,
When i finish editing the first textbox and directly touches the second textbox without clicking the next button on keyboard, that time popoverview controller menu is opened on second textbox and the keyboard is unable to resign , the keyboard is strucking over their my code for resigning the keyboard is not working.
Write your code which you used on NEXT button event of Keyboard in this bellow method...
- (BOOL)textFieldShouldEndEditing:(UITextField *)textField {
if (textField == yourFirstTextBox) {
// write your code here
}
return YES;
}
-(void)textFieldDidBeginEditing:(UITextField *)textfield
{
if ([textfield tag]==yourtextfieldtag)//set tag for your textfield
{
[yourfirsttextfield resignFirstResponder];
[yoursecondtextfield resignFirstResponder];
.
.
.
//Write all textField with resignFirstResponder
}
}
Here is the way you can handle your SoftKeypad
Handling Soft Keypad in iPhone Tutorial
There are three simple ways to handle keypad here
Keypad go back when Button clicked.
Keypad go back when user click on Return or Done button on keypad.
Keypad go back when user Touch on Background screen/view.
Just follow 3rd way in you case.
What you need to do is just crate a method in which call
method for the desired text field.
and Updated Related UIView class to UIControl in Interface Builder.
as I have written all the information step by step to make it more easy and clear.
Here is the responsible code snip
- (IBAction)keypadGoBack:(id)sender {
[userNameTextField resignFirstResponder];
[passwordTextField resignFirstResponder];
}
Hope this will help you.
-(BOOL)textFieldShouldBeginEditing:(UITextField *)textField
{
if(textField==yourTextField)
{
[self.view endEditing:YES];
// Write Your Popoverview Code / Extra Code
return NO;
}
return YES;
}
Here this method will get called when you will hit textfield.
And check the textfield with yourtextFieldName if its match..it will resign all keyboard.if there is more than one also..with the help of.
[self.view endEditing:YES];
And you can do Extra Code also For popoverview and return no means It will not give keyboard to that perticuler textField.
Thanks.
I have 2 textFields side by side, countryCodeTextField and cellphoneTextField
On countryCodeTextField. I have an action selectCountry that happens on Edit Did Begin on the countryCodeTextField
- (IBAction)selectCountry:(id)sender {
countryCodeTextField.delegate = self;
[countryCodeTextField resignFirstResponder];
Note that self implements the <UITextFieldDelegate>.
Problem is when user click's cellphone the keyboard is displayed if he clicks on countryCodeTextField the keyboard is never dismissed.
If the person clicks the countryCode first then the keyboard never appears(which is what I want).
Why isn't the keyboard hidden when the user clicks cellphoneTextField first and then countryCodeTextField?
If you don't want the user to be able to edit a particular UITextField, set it to not be enabled.
UITextField *textField = ... // Allocated somehow
textfield.enabled = NO
Or just check the enabled checkbox in Interface Builder. Then the textfield will still be there and you'll be able to update it by configuring the text. But as sort of mentioned in comments, users expect UITextFields to be editable.
Also, why are you setting the delegate in the IBAction callback? I would think you'd be better off doing this in Interface Builder or when you create the UITextField in code.
EDIT:
Ok - so you want users to be able to select the box, but then bring up a custom subview(s) from which they select something which will fill the box.
So set the UITextField delegate when you create it (as mentioned above) and implement the following from the UITextFieldDelegate protocol:
- (BOOL)textFieldShouldBeginEditing:(UITextField *)textField {
return NO;
}
to return NO. Note that if you are using the same delegate for both of your UITextFields, you will need to make this method return YES for the other field. For example, something like:
- (BOOL)textFieldShouldBeginEditing:(UITextField *)textField {
if (textField == countryTextField)
return NO;
return YES;
}
Hopefully this should stop the keyboard being displayed - and now you have to work out how to fire your own subviews, which I'd suggest doing via an IBAction (touch up or something perhaps). You'll have to test various things out here, but remember you're kinda corrupting the point of UITextField and maybe it'll work and maybe it won't, and maybe it'll break in the next iOS upgrade.
Okay, so first, I think you shouldn't be using a UITextField. I think you should be using a UIButton and have the current value showing as the button's title. However, if you have your heart set on it, I would use our good friend inputView, a property on UITextField, and set that to your custom input view (which I assume is a UIPickerView or similar.)
This has the added bonus of not breaking your app horribly for blind and visually impaired users, something you should probably be aware of before you go messing about with standard behaviour.
In your method :
- (IBAction)textFieldDidBeginEditing: (UITextField *)textField
call this :
[textField becomeFirstResponder];
and apply checks for the two fields i.e., when textField is the countryCodeTextField write :
[textField resignFirstResponder];
and call your method :
[self selectCountry];
In this method display the list of country codes.
So Your code will be :
- (BOOL)textFieldShouldBeginEditing:(UITextField *)textField {
return YES;
}
- (IBAction)textFieldDidBeginEditing: (UITextField *)textField{
[textField becomeFirstResponder];
if (textField == countryCodeTextField){
[textField resignFirstResponder];
[self selectCountry];
}
}
-(IBAction)selectCountry{
//display the list no need to do anything with the textfield.Only set text of TextField as the selected countrycode.
}
I have one popovercontroller, in popover controller there is one textfield.Whenever i try to type in textfield uipopovercontroller goes away upper left side.Problem is that i want popup enable while typing.
Thanks in advance
What you can try is, while editing is being done on your UITextField, in your popoverControllerShouldDismissPopover: method you return NO. Example below..
- (BOOL)popoverControllerShouldDismissPopover:(UIPopoverController *)popoverController {
if([someTextField isFirstResponder])
return NO;
return YES;
}
Mark this is the answer if it is your solution.
I have 2 text fields, one is for usrname and the other one is for password.
Question : after entering a username and hit next from the keyboard, how can I jump to the password field for typing a password..
Any comments are welcomed here.
Check this question. It pretty much clarifies on how to implement what Juan said. How to navigate through textfields (Next / Done Buttons)
You need to implement the UITextFieldDelegate protocol and use the becomeFirstResponder method to change the focus to the next textField.
The method you need to implement on the delegate is textFieldShouldReturn:.
This is a sample implementation I have:
-(BOOL) textFieldShouldReturn:(UITextField *)textField
{
[passwordField becomeFirstResponder];
if (self.passwordField == textField) {
[self loginAction:textField];
}
return YES;
}
You can set the implementing class delegate for both of your text fields.
Hope it helps!
What would you like to have to signify that someone has finished typing? Whatever that condition is, just use the
[myTextField becomeFirstResponder];
method to make the next text field be in control of the keyboard. Effectively this will create the "jump".
Furthermore, you can do this to hook up the next button to be the trigger for the jump.
//amount received animations
[myTextField setDelegate:self];
[myTextField setReturnKeyType:UIReturnKeyDone];
[myTextField addTarget:self
action:#selector(methodThatJumps:)
forControlEvents:UIControlEventEditingDidEndOnExit];
and in the method that jumps, simply use the above line. Let me know if you'd like me to explain it better.
I've got a UISearchBar in my interface and I want to customise the behaviour of the the small clear button that appears in the search bar after some text has been entered (it's a small grey circle with a cross in it, appears on the right side of the search field).
Basically, I want it to not only clear the text of the search bar (which is the default implementation) but to also clear some other stuff from my interface, but calling one of my own methods.
I can't find anything in the docs for the UISearchBar class or the UISearchBarDelegate protocol - it doesn't look like you can directly get access to this behaviour.
The one thing I did note was that the docs explained that the delegate method:
- (void)searchBar:(UISearchBar *)searchBar textDidChange:(NSString *)searchText;
is called after the clear button is tapped.
I initially wrote some code in that method that checked the search bar's text property, and if it was empty, then it had been cleared and to do all my other stuff.
Two problems which this though:
Firstly, for some reason I cannot fathom, even though I tell the search bar to resignFirstResponder at the end of my method, something, somewhere is setting it back to becomeFirstResponder. Really annoying...
Secondly, if the user doesn't use the clear button, and simply deletes the text in the bar using the delete button on the keyboard, this method is fired off and their search results go away. Not good.
Any advice or pointers in the right direction would be great!
Thanks!
Found the better solution for this problem :)
- (void)searchBar:(UISearchBar *)searchBar textDidChange:(NSString *)searchText{
if ([searchText length] == 0) {
[self performSelector:#selector(hideKeyboardWithSearchBar:) withObject:searchBar afterDelay:0];
}
}
- (void)hideKeyboardWithSearchBar:(UISearchBar *)searchBar{
[searchBar resignFirstResponder];
}
The answer which was accepted is incorrect. This can be done, I just figured it out and posted it in another question:
UISearchbar clearButton forces the keyboard to appear
Best
I've got this code in my app. Difference is that I don't support 'live search', but instead start searching when the user touches the search button on the keyboard:
- (void)searchBarTextDidBeginEditing:(UISearchBar *)searchBar {
if ([searchBar.text isEqualToString:#""]) {
//Clear stuff here
}
}
Swift version handling close keyboard on clear button click :
func searchBar(searchBar: UISearchBar, textDidChange searchText: String) {
if searchText.characters.count == 0 {
performSelector("hideKeyboardWithSearchBar:", withObject:searchBar, afterDelay:0)
}
}
func hideKeyboardWithSearchBar(bar:UISearchBar) {
bar.resignFirstResponder()
}
You could try this:
- (void)viewDidLoad
{
[super viewDidLoad];
for (UIView *view in searchBar.subviews){
for (UITextField *tf in view.subviews) {
if ([tf isKindOfClass: [UITextField class]]) {
tf.delegate = self;
break;
}
}
}
}
- (BOOL)textFieldShouldClear:(UITextField *)textField {
// your code
return YES;
}
I would suggest using the rightView and rightViewMode methods of UITextField to create your own clear button that uses the same image. I'm assuming of course that UISearchBar will let you access the UITextField within it. I think it will.
Be aware of this from the iPhone OS Reference Library:
If an overlay view overlaps the clear button, however, the clear button always takes precedence in receiving events. By default, the right overlay view does overlap the clear button.
So you'll probably also need to disable the original clear button.
Since this comes up first, and far as I can see the question wasn't really adequately addressed, I thought I'd post my solution.
1) You need to get a reference to the textField inside the searchBar
2) You need to catch that textField's clear when it fires.
This is pretty simple. Here's one way.
a) Make sure you make your class a , since you will be using the delegate method of the textField inside the searchBar.
b) Also, connect your searchBar to an Outlet in your class. I just called mine searchBar.
c) from viewDidLoad you want to get ahold of the textField inside the searchBar. I did it like this.
UITextField *textField = [self.searchBar valueForKey:#"_searchField"];
if (textField) {
textField.delegate = self;
textField.tag = 1000;
}
Notice, I assigned a tag to that textField so that I can grab it again, and I made it a textField delegate. You could have created a property and assigned this textField to that property to grab it later, but I used a tag.
From here you just need to call the delegate method:
-(BOOL)textFieldShouldClear:(UITextField *)textField {
if (textField.tag == 1000) {
// do something
return YES;
}
return NO;
}
That's it. Since you are referring to a private valueForKey I can't guarantee that it will not get you into trouble.
Best solution from my experience is just to put a UIButton (with clear background and no text) above the system clear button and than connect an IBAction
- (IBAction)searchCancelButtonPressed:(id)sender {
[self.searchBar resignFirstResponder];
self.searchBar.text = #"";
// some of my stuff
self.model.fastSearchText = nil;
[self.model fetchData];
[self reloadTableViewAnimated:NO];
}
Wasn't able to find a solution here that didn't use a private API or wasn't upgrade proof incase Apple changes the view structure of the UISearchBar. Here is what I wrote that works:
- (void)viewDidLoad {
[super viewDidLoad];
UITextField* textfield = [self findTextFieldInside:self.searchBar];
[textfield setDelegate:self];
}
- (UITextField*)findTextFieldInside:(id)mainView {
for (id view in [mainView subviews]) {
if ([view isKindOfClass:[UITextField class]]) {
return view;
}
id subview = [self findTextFieldInside:view];
if (subview != nil) {
return subview;
}
}
return nil;
}
Then implement the UITextFieldDelegate protocol into your class and overwrite the textFieldShouldClear: method.
- (BOOL)textFieldShouldClear:(UITextField*)textField {
// Put your code in here.
return YES;
}
Edit: Setting the delegate on the textfield of a search bar in iOS8 will produce a crash. However it looks like the searchBar:textDidChange: method will get called on iOS8 on clear.