I have set up an event system in FMOD with 3D sound triggered when the listener is close to them. I want to be able to change the listener angle of the listener so that my entire sound landscape shifts the same amount of degrees as my listener rotates. Nice huh?
Is it possible? What would be the iPhone code for that?
Would I pass something to the method set3DListenerAttributes?
I'm not sure I fully understand, do you just want to rotate the listener in 3D space? If so you adjust the listener forward vector to point in the new direction.
** Based on your response **
FMOD works with a cartesian co-ordinate system, it has a unit length vector which points in the direction an object (or listener) is facing. I would recommend you do some reading on trigonometry to fully understand how to convert an angle (in degrees or radians) to a vector.
For your forward vector the equation is (if I remember correctly):
x = cos(angle)
z = sin(angle)
y = 0;
This assumes angle is in radians, to convert from degrees to radians:
radians = degrees * (180 / Pi)
where Pi is roughly 3.14159265
This was the code I used in the end:
float degree = 90;
float radians = (degree) * (M_PI/180);
float fx = cos(radians);
float fz = sin(radians);
forward.x = fx;
forward.z = fz;
listenerpos.x = lxPos * DISTANCEFACTOR;
listenerpos.z = lyPos * DISTANCEFACTOR;
result = eventSystem->set3DListenerAttributes(0, &listenerpos,&vel,&forward,NULL);
Related
Using Sprite Kit I am trying to set an SKPhysicsBody moving according to a given angle, so for example if you wanted the sprite to travel to the right you would specify 1.571 radians. To turn the specified angle into a velocity I am using the method below to convert radians to a CGVector. The ORIGINAL version that I implemented from memory has the strange effect of offsetting all the angles by 90degrees. (i.e. if 0 degrees is used the sprite moves right (just like it would if you specified 90degrees)
Question:
I have fixed this in the NEW version by swapping the dx and dy assignments. My question is why does this happen, do I have it wrong in the original (there do seem to be others doing it that way on the web) or is there some reason based on the particular coordinate system being used.
// ORIGINAL
- (CGVector)convertAngleToVector:(CGFloat)radians {
CGVector vector;
vector.dx = cos(radians) * 10;
vector.dy = sin(radians) * 10;
NSLog(#"DX: %0.2f DY: %0.2f", vector.dx, vector.dy);
return vector;
}
// NEW, SWAPPED DX & DY
- (CGVector)convertAngleToVector:(CGFloat)radians {
CGVector vector;
vector.dy = cos(radians) * 10;
vector.dx = sin(radians) * 10;
NSLog(#"DX: %0.2f DY: %0.2f", vector.dx, vector.dy);
return vector;
}
NOTE: also in Sprite Kit clockwise rotations are negative, so far convertAngleToVector is doing positive clockwise rotations (i.e. 1.571 radians is right, where it should be left) I could just do cos(radians*-1) and sin(radians*-1) but there might be some underlying reason for this based on me swapping dx and dy.
Sprite Kit (SKView Coordinates):
Yeah, SpriteKit defaults to the right. The Physics Collision sample project solves this by implementing this method:
- (CGFloat)shipOrientation
{
// The ship art is oriented so that it faces the top of the scene, but Sprite Kit's rotation default is to the right.
// This method calculates the ship orientation for use in other calculations.
return self.zRotation + M_PI_2;
}
You can then just get the existing orientation by calling something like:
CGFloat shipDirection = [self shipOrientation];
And then adjust the zRotation property from there.
From the Sprite Kit Programming Guide (emphasis added):
Sprite Kit also has a standard rotation convention. Figure 4-2 shows the polar coordinate convention. An angle of 0 radians specifies the positive x axis. A positive angle is in the counterclockwise direction.
In this coordinate system, an angle of zero radians pointing to the right is correct. If you want to use a system in which a zero angle is straight up (along positive y axis) and increase clockwise, you'll want to transform your angles before converting them to vectors.
I want to throw a ball that has a projectile motion. I have a monkey on centre of screen and onTouchBegin I am taking the starting point of the touch and onTouchEnded I am taking the ending points. From the starting and ending points I am taking the angle value between them. Like 30 degrees, 45 or 90 degree.
This is my code by which I have calculated angle of start to endpoint
float angleRadians = atan2(startTouchPoint.x - touchPoint.x, startTouchPoint.y - touchPoint.y);
float angleDegrees = CC_RADIANS_TO_DEGREES(angleRadians);
float cocosAngle = -1 * angleDegrees;
Now i am using Projectile motion formula to throw ball with angle i have calculated from above formula .
inside init method
gravity = 9.8; // metres per second square
X = 0;
Y = 0;
V0 = 50; // meters per second -- elevation
VX0 = V0 * cos(angle); // meters per second
VY0 = V0 * sin(angle); // meters per second
gameTime = 0;
and onTouchEnded i have called fire method which will throw ball .
-(void)fire:(ccTime) dt
{
CCLOG(#"Angle 1: %.2f",angle);
gameTime += dt*6;
// x = v0 * t * cos(angle)
X = (V0 * gameTime * cos(angle))/2+120;
// y = v0 * t * sin(angle) - 0.5 * g * t^2
Y = (V0 * gameTime * sin(angle) - 0.5 * gravity * pow(gameTime, 2))/2+255;
if (Y > 50)
{
sprite_webfire.position = ccp(X,Y);
flag = true;
}
else
{
//angleValue += 15;
angleValue = angle;
angle = [self DegreesToRadians:angleValue];
gravity = 9.8; // metres per second square
X = 0;
Y = 0;
V0 = 50; // meters per second -- elevation
VX0 = V0 * cos(angle); // meters per second
VY0 = V0 * sin(angle); // meters per second
gameTime = 0;
// [self pauseSchedulerAndActions];
}
if (Y < 50)
{
[self unschedule:#selector(fire:)];
}
NSLog(#"ball (%lf,%lf), dt = %lf angle value %d", X, Y, dt,angleValue);
}
this code is working . by this code i can throw ball in projectile motion but i cant throw it where i want to. i cant throw wrt to given angle from start to end point.
i can throw it like red mark but i want to throw it blue mark with swipe . but its not throwing like i am swiping screen.
I am not certain on what math you are using to do this, I find your documentation a bit confusing.
Generally, for project tile motion this is what you need to do:
Find out what the take off angle is relative to the horizontal. Then depending on whatever initial velocity you want the object to have, use that and you trig equations to put your initial velocities into rectangular components.
For example:
If initial velocity was 10, the initial velocity in the y direction would be 10sin(angle), and in the x direction it would be 10cos(angle).
Then in to update the position of the sprite you should use kinematics equations: http://www.physicsclassroom.com/class/1dkin/u1l6c.cfm
First update velocities:
Velocity in the Y direction: V = v(initial) + gravity*(Delta-time)
Velocity in the X direction is constant unless you want to factor in some sort of resistance to make things a lot more complicated.
then position y = oldPositionY + velocity(in Y direction)*(Delta-time) + 1/2(gravity)(delta-time)^2.
and position x = oldPositionX + Xvelocity*delta-time
I have done some projectile motion stuff, and I have found you need to make gravity a large constant, something around 500 to make it look life-like. Let me know if this is confusing or you don't know how to implement it.
I would suggest that you take a look at the following tutorial: http://www.raywenderlich.com/4756/how-to-make-a-catapult-shooting-game-with-cocos2d-and-box2d-part-1.
It shows you how to use a physics engine, so you don't need to do much of the math. All the 'bullets' in the tutorial are also moving with projectile motion.
I'll add a bit to what was already said (which was good). Firstly, you should not be wasting time computing any angles. Stick with vectors for your velocity. In other words, get the initial velocity vector from the touch start and end location, and that will be your (v0x, v0y). For example:
CGPoint initialVelocity = ccpSub(touchPoint, startTouchPoint);
float v0x = initialVelocity.x;
float v0y = initialVelocity.y;
If you wish to assign a different magnitude to the initial velocity vector, simply normalize it and then multiply it by a new magnitude.
CGPoint unitVelocity = ccpNormalize(initialVelocity);
float magnitude = 200; // or whatever you want it to be
CGPoint velocity = ccpMult(unitVelocity, magnitude);
Anyway, with this velocity set properly you can then use it in your position calculations as before, but without the added complexity of calculating the angles.
-(void) fire:(ccTime)dt
{
.
.
gameTime += dt;
// if x(t) = x0 + v0x*t, then dx = v0x*dt
x += v0x*dt;
// if y(t) = y0 + v0y*t - 0.5t^2, then dy = v0y*dt - g*t*dt
y += (v0y * dt - g*gameTime*dt);
.
.
}
Also you should not set v0 = 50. Calculate the velocity from the vector as I suggested.
Something important to consider is that you are calculating what the movement should be in a physical world based upon units of meters. The screen is operating in points, not meters, so you will probably have to apply a scaling factor to the new position (x,y) to get the look that you are going for.
Edit: my bad, I had to revisit my math in the position calculation. My differentials was a bit rusty.
I am using Cocos3D. I have a camera (which acts as the first-person viewed player in a world with only a spinning "hello, world" and a spinning earth. I have made it possible for the camera to point in any direction, and I have got it to move, but how do I get the camera/player to move forward in the direction he is pointing? (He does not go up or down, i.e. his y position does not change).
I note this is quite an old question - hopefully this answer helps someone!
You need to get the rotation angle of your camera, convert that to radians and use trigonometry to get the new X-Z coordinates. Tell your camera to move to those coordinates and presto, the player has moved forward!
CC3Camera *cam = self.activeCamera;
CC3Rotator *rotator = cam.rotator;
CC3Vector ro = rotatoooor.rotation;
CC3Vector loc = cam.globalLocation;
// If the -90 is left off, you go left/right and not forward
float roA = rotator.rotationAngle-90;
// Bug in rotationAngle? Need this as 315 angle reports as 45
int roI = ro.y;
int diff = roA+90 - roI;
if (diff == 0 && roI == 45)
roA = 315-90;
double theta = roA * M_PI/180; // Convert to radians
/*
x = d cos a
z = d sin a
*/
double sinA = sin(theta);
double cosA = cos(theta);
double newX = distance*cosA + loc.x;
double newZ = distance*sinA + loc.z;
CC3Vector newTo = cc3v(newX, loc.y, newZ); // Pass this to your camera
double = rollingZ = acceleration.x;
double = rollingX = acceleration.y;
if (rollingZ > 0.0) {
self.centerCoordinate.inclination = atan(rollingX / rollingZ) + M_PI / 2.0; //LINE 1
}
else if (rollingZ < 0.0) {
self.centerCoordinate.inclination = atan(rollingX / rollingZ) - M_PI / 2.0; // LINE 2
}
else if (rollingX < 0) {
self.centerCoordinate.inclination = M_PI/2.0; //atan returns a radian
}
else if (rollingX >= 0) {
self.centerCoordinate.inclination = 3 * M_PI/2.0;
Im just trying to fully understand this piece of code. I'm looking to build AR apps on the iphone and this code has the function of calculating the angle of inclination of the device using the accelerometer readings.
My understanding is this:
Assuming a portrait orientation if i roll the device forward the x axis of the accelerometer increases towards a negative number of -1.0 (i.e. the device is laid flat with the screen facing up). If i tilt the device towards me the x axis value increases towards a value of 1.0 (until the device is flat facing the ground).
The y axis changes up and down its axis between -1.0 and 0.0 (0 implies the device is horizontal).
If we take some example readings say x = 0.5 (a -45 degree angle, tilting the device towards me) and y = 0.8. If i plotted this on a cartesian coordinate graph with y (rollingX as the vertical axis) and x (rollingZ as the horizontal) and draw a line between them i understand that i can use the reverse tangent function (atan) to calculate the angle. My confusion comes on line 1. I dont understand why that line adds 90 degrees (in radians) to the calculated angle given by the atan function?
I just cant seem to visualise on a graph whats going on. If someone could shed some light on this - that would be much appreciated.
I suppose that these +90 degrees or -90 degrees (in case of negative rollingZ) are added to bring inclination value to widely used Polar coordinate system with angle between -180 and 180 degrees.
Assuming that you have Z line projecting upward when you look at the screen of the device and Z line looking at you from the screen, the result of calculations above vill give you an angle between screen plane and horizontal plane.
Let us assume that acceleration value is positive when it is goes "inside" the device:
1) Device is in vertical position, we have rollingZ = 1, rollingX = 0. The code returns 90 degrees.
2) Device is tilted towards user. Let rollingZ be 0.7 and rollingX be -0.7. This will give us 45 degree angle.
3) Device is in upside-down position, now we have rollingZ = -1 and rollingX = 0, and it is -90 degrees.
I'm trying figure out how to get an OpenGL specified object to be displayed correctly according to the device orientation (ie. according to the gravity vector from the accelerometer, and heading from compass).
The GLGravity sample project has an example which is almost like this (despite ignoring heading), but it has some glitches. For example, the teapot jumps 180deg as the device viewing angle crosses the horizon, and it also rotates spuriously if you tilt the device from portrait into landscape. This is fine for the context of this app, as it just shows off an object and it doesn't matter that it does these things. But it means that the code just doesn't work when you attempt to emulate real life viewing of an OpenGL object according to the device's orientation. What happens is that it almost works, but the heading rotation you apply from the compass gets "corrupted" by the spurious additional rotations seen in the GLGravity example project.
Can anyone provide sample code that shows how to adjust correctly for the device orientation (ie. gravity vector), or to fix the GLGravity example so that it doesn't include spurious heading changes?
//Clear matrix to be used to rotate from the current referential to one based on the gravity vector
bzero(matrix, sizeof(matrix));
matrix[3][3] = 1.0;
//Setup first matrix column as gravity vector
matrix[0][0] = accel[0] / length;
matrix[0][1] = accel[1] / length;
matrix[0][2] = accel[2] / length;
//Setup second matrix column as an arbitrary vector in the plane perpendicular to the gravity vector {Gx, Gy, Gz} defined by by the equation "Gx * x + Gy * y + Gz * z = 0" in which we arbitrarily set x=0 and y=1
matrix[1][0] = 0.0;
matrix[1][1] = 1.0;
matrix[1][2] = -accel[1] / accel[2];
length = sqrtf(matrix[1][0] * matrix[1][0] + matrix[1][1] * matrix[1][1] + matrix[1][2] * matrix[1][2]);
matrix[1][0] /= length;
matrix[1][1] /= length;
matrix[1][2] /= length;
//Setup third matrix column as the cross product of the first two
matrix[2][0] = matrix[0][1] * matrix[1][2] - matrix[0][2] * matrix[1][1];
matrix[2][1] = matrix[1][0] * matrix[0][2] - matrix[1][2] * matrix[0][0];
matrix[2][2] = matrix[0][0] * matrix[1][1] - matrix[0][1] * matrix[1][0];
//Finally load matrix
glMultMatrixf((GLfloat*)matrix);
Here's a clarification showing how to get the elevation and tilt that are needed for gluLookAt solution as shown in my last answer:
// elevation comes from z component (0 = facing horizon)
elevationRadians = asin(gravityVector.z / Vector3DMagnitude(gravityVector));
// tilt is how far screen is from vertical, looking along z axis
tiltRadians = atan2(-gravityVector.y, -gravityVector.x) - M_PI_2;
Following up on Chris's suggestion: I'm not sure if I've got this all correct due to differing conventions of row/column order and heading cw or ccw. However the following code is what I came up with:
Vector3D forward = Vector3DMake(0.0f, 0.0f, -1.0f);
// Multiply it by current rotation matrix to get teapot direction
Vector3D direction;
direction.x = matrix[0][0] * forward.x + matrix[1][0] * forward.y + matrix[2][0] * forward.z;
direction.y = matrix[0][1] * forward.x + matrix[1][1] * forward.y + matrix[2][1] * forward.z;
direction.z = matrix[0][2] * forward.x + matrix[1][2] * forward.y + matrix[2][2] * forward.z;
heading = atan2(direction.z, direction.x) * 180 / M_PI;
// Use this heading to adjust the teapot direction back to keep it fixed
// Rotate about vertical axis (Y), as it is a heading adjustment
glRotatef(heading, 0.0, 1.0, 0.0);
When I run this code, the teapot behaviour has apparently "improved" eg. heading no longer flips 180deg when device screen (in portrait view) is pitched forward/back through upright. However, it still makes major jumps in heading when device (in landscape view) is pitched forward/back. So something's not right. It suggests that the above calculation of the actual heading is incorrect...
I finally found a solution that works. :-)
I dropped the rotation matrix approach, and instead adopted gluLookAt. To make this work you need to know the device "elevation" (viewing angle relative to horizon ie. 0 on horizon, +90 overhead), and the camera's "tilt" (how far the device is from vertical its x/y plane ie. 0 when vertical/portrait, +/-90 when horizontal/landscape), both of which are obtained from the device gravity vector components.
Vector3D eye, scene, up;
CGFloat distanceFromScene = 0.8;
// Adjust eye position for elevation (y/z)
eye.x = 0;
eye.y = distanceFromScene * -sin(elevationRadians); // eye position goes down as elevation angle goes up
eye.z = distanceFromScene * cos(elevationRadians); // z position is maximum when elevation is zero
// Lookat point is origin
scene = Vector3DMake(0, 0, 0); // Scene is at origin
// Camera tilt - involves x/y plane only - arbitrary vector length
up.x = sin(tiltRadians);
up.y = cos(tiltRadians);
up.z = 0;
Then you just apply the gluLookAt transformation, and also rotate the scene according to the device heading.
// Adjust view for device orientation
gluLookAt(eye.x, eye.y, eye.z, scene.x, scene.y, scene.z, up.x, up.y, up.z);
// Apply device heading to scene
glRotatef(currentHeadingDegrees, 0.0, 1.0, 0.0);
Try rotating the object depending upon iphone acceleration values.
float angle = -atan2(accelX, accelY);
glPushMatrix();
glTranslatef(centerPoint.x, centerPoint.y, 0);
glRotatef(angle, 0, 0, 1);
glTranslatef(-centerPoint.x, -centerPoint.y, 0);
glPopMatrix();
Where centerPoint is the middle point the object.
oo, nice.
GLGravity seems to get everything right except for the yaw. Here's what I would try. Do everything GLGravity does, and then this:
Project a vector in the direction you want the teapot to face, using the compass or whatever you so choose. Then multiply a "forward" vector by the teapot's current rotation matrix, which will give you the direction the teapot is facing. Flatten the two vectors to the horizontal plane and take the angle between them.
This angle is your corrective yaw. Then just glRotatef by it.
Whether or not the 3GS's compass is reliable and robust enough for this to work is another thing. Normal compasses don't work when the north vector is perpendicular to their face. But I just tried the Maps app on my workmate's 3GS and it seems to cope, so maybe they have got a mechanical solution in there. Knowing what the device is actually doing will help interpret the results it gives.
Make sure to test your app at the north and south poles once you're done. :-)
Getting a much more stable gravity-based reference, can now be done using CMMotionManager.
When starting motion updates with startDeviceMotionUpdates(), you can specify a reference frame.
This fuses the accelerometer, gyroscope and optionally (depending on chose reference frame) magnetometer data. Accelerometer data is pretty noisy and bouncy (any sideways motion of the device temporarily tilts the gravity vector by any device acceleration) and alone doesn't make a good reference.
I've been low-pass filtering the accelerometer data, which helps a bit but makes the system slow.