Wrong class in netbeans generated Resource Map Code for dialogs - netbeans

There seems to be a bug in netbeans 6.9.1 when it generates the ResourceMap code. My project is called ScriptedResponseApp and the main entry is ScriptedResponseAppView. So, for all the dialogs, I should get something like
org.jdesktop.application.ResourceMap resourceMap =Application.getInstance(ScriptedResponseApp.class).getContext().getResourceMap(SomeDialogClass.class)
but instead I get
org.jdesktop.application.ResourceMap resourceMap = org.jdesktop.application.Application.getInstance(scriptedresponseapp.ConsoleView.class).getContext().getResourceMap(SomeDialogClass.class);
Where ConsoleView is another unrelated class in my project. Why is netbeans picking ConsoleView up as my main class and how do I fix it? As a work around, I've been closing netbeans, editing the code in a text editor, and reopening netbeans. It work until I make a change to anything involving a resource file, which generates out this same wrong code.
Any ideas on how to fix this annoying bug?

I dont know if it's a bug. In my case, I refactored the main class, but Netbeans don't change the project.xml (nbproject folder).
I mannualy change and it worked.

Related

Double clicking a resource in Eclipse Project Explorer does not open the second file

In an Eclipse based application (RCP), when double clicking on a file that appears in the project explorer, for the first file this will work – the associated editor will open. However, when double clicking again on a file, it will not open. If you click somewhere out of the Project Explorer and then return to the Project Explorer, then the second double click will work.
Note that right-clicking on the resource and selecting “Open” always works. In addition, in Package Explorer it always works.
I believe this is related to eclipse bugs 285239 and 256761.
Does anyone know of a way that I can overcome this problem, as the RCP developer. The file editor is a custom editor in one of my plugins.
The problem does not seem to happen to me with java files in standard eclipse for java development.
Thanks,
Eyal.
I solved the problem by implementing a setFocus method on the editor class. In the setFocus, I set the focus to some component. (To be precise in my case the editor was a subclass of SharedHeaderFormEditor so I set the focus to the active page).
The truth is that the specification of the setFocus method in IWorkbenchPart requires you to "assign the focus to one of the controls contained in the part's parent composite". It seems that the default implementation of setFocus in some cases did not do that (I don't know why, maybe I was missing something or for other reason).
Note that also setting focus explicitly to a control from within editor initializing partialy solves the problem.

Eclipse treating file as plain text

I've got a small homework project, and for whatever reason Eclipse has decided to stop highlighting syntax or allowing intellisense or goto definitions or anything in this Main.java file. I've tried rebooting it, and the computer, but had no luck.
The thing that really has me confused is that it's still compiling and running the code correctly (eg, changes I make in Main.java are compiled and run - it's not running old Main.class files), so it's still in the build path ... right?
Any ideas?
Right click on the file in the Package Explorer and choose the Open With menu. You will probably find that Text Editor is selected, choose Java Editor to open the file with the correct editor.
The Open With menu selection is remembered so you should get the Java Editor in future, but equally if you choose the plain text editor that is also remembered.
I suggest finding a way to reset any setting you might have set by accident. Not saying that you did it. But just to make sure, just try it out. If you customized the preferences already, you could make some kind of note of the settings, then change it. If that doesn't work, let me know. Good Luck!
Copy the text somewhere, delete the file, and then add a new class (of the same name) and paste the text back.

Eclipse IDE lost popup menu suggestions

I've seem to have lost the ability in my Eclipse to auto-correct errors in my source code lines.
For example, a line like this:
Date date = new Date();
has red jagged lines beneath the Date() part. Previously I could mouse hover over it see a popup menu of options to fix it. Now I all I ever get is a popup with the text "Cannot resolve to a type".
The only change I can think of that I've made and I don't know if it has anything to do with this problem, is that I started editing my .java files with an outside editor. Then focusing back into Eclipse I get a popup saying the source has changed and do I want to update so I say OK.
Sometimes I will edit inside Eclipse and sometimes i will edit the source outside of Eclipse. I'm not sure if this is a bad practice or not?
Its your wish to edit Java files outside or inside eclipse. But Java editor has many features which are very helpful to developers. I suggest to edit Java files inside eclipse only.If you find other editors are good or you used to it then no problem you can edit Java files out side eclipse also. The problem you mentioned in not related to it. But make sure that changes are applied before building project in eclipse.
Solution
This occurs whenever there are multiple classes are available with the same name in you build path then eclipse don't know which one to import by default. So keep the caret on the error line and press Ctrl+1. Then a eclipse gives options to user to import one among these. See the picture below. Choose the right one then error will disappear.

can not navigate to code in eclipse

All,
I had imported the source code for jbpm as a project in Eclipse.
earlier I was able to navigate through the code by holding down the Ctrl key on a class name and clicking on it...
I recently had to re-structure my code base and had to re-import the jbpm4 code base as a project...
Strangely the navigation does not work any more, any suggestion what I might be missing?
There is a bug on some eclipse versions where the 'go to declaration' suddenly stops working. The only workaround I've found is to close and open the editor window, then it will work again

Bypassing Lock on Generated Code in NetBeans 6.5?

In NetBeans the GUI Builder generates code that is off limits to you from the editor.
I know you can switch to Design Mode and specify custom code and then enter edit in indirectly that way, but it's a pain to not be able to edit text that's 2 lines from your cursor.
Can I allow editing within those regions... I promise I'll be careful :)
Thanks.
Note: I don't want to lose code generation
If you open it in an external editor, there are two possibilities:
there is no guarantee that the changes you make will work (and not break anything) in the Netbeans UI Editor
The next time you edit the file in Netbeans it will be regenerated.
Either way, probably not what you want. The best thing to do would probably be to make the whole design up in the gui editor and when you are happy with it, delete the comments and continue on.
[sarcasm]
With the drag and drop gui editor, what could you possibly want to change by hand anyway?
[/sarcasm] ;)
If you open the .java files in Notepad or WordPad, you'll find pairs of comments that say
// GEN-BEGIN: <name of section>
...
// GEN-END: <name of section>
Delete those comments, and two things will happen.
You'll be able to edit anywhere in the file in NetBeans.
NetBeans will not be able to regenerate the file from the GUI editor.
So it can be done, but don't do it unless you really mean it.
EDIT: "Note: I don't want to lose code generation." Ok, let's see here.
You want to change what is generated.
You don't want to lose code generation.
You don't want to use the facilities NetBeans provides for adding custom code.
It sounds like you're wishing yourself trouble. :D
I had a same problem. I extended JPanel with my own panel class and I was not able to pack it with the rest of UI. First I searched the web and I found your question. I was not able to find elegant solution to this problem.
Therefore, I decided to create another java class and copy NetBeans created code into it. It worked like a charm.
I agree, it would be nice if we can modify existing code like in .NET.
I copy the initcomponents() method, create my own method newInitComponents() paste the generated code, and override what needs to be overridden before i distribute the code. That way when a change is made in the editor, you can still copy paste the code into your new method. You keep the functionality without costing you the ability to override where necessary. Just call newInitComponents() in your constructor rather than the original. This is not the most efficient way of doing things, but it does what you want.
You can also try moving the .form file in
(project name)\src\(name of JFrame/JPanel).form
NetBeans will now see it as a .java file.
If you did not edit anything necessary for the GUI editor, you can move the .form file back into the src folder.
Can you subclass the class and redefine the method where this code is? Of course then you'll have to maintain the method over time as you make changes to the GUI.
You can maybe also look into AspectJ. It will modify the byte-code at build time and make the changes you define. Not sure if this gives you enough control over what code to change.
If you use APT you can rewrite source code at compile time. This way you can overwrite the code that's there at the moment. You could keep the new code in the same Java file along with comments to explain what is going on. This tutorial makes it pretty easy to get started. Copy that code, get it working, then tweak it to your liking. To find out where in the code the annotated method is call getPosition() on the Declaration.
Go to design page and select any one of the fields. Right click on any selected field and choose Customizer Code , In Customizer Code change all default code to custom creation . Now you can edit your design code as you like...
Very simple... the crappy UTF-8 did not let me compile one JasperReport (everything done by GUI). So, I needed to change Project to iso-8859-1. Result? The project is messed up and some of the things to correct are in the blocked parts of the code. So, I really NEED to edit those automatically generated parts. When they are regenerated, they will be fine because the project is now iso-8859-1.
Step # 1 Close the project in NetBeans
Step # 2 Delete the .form file from the source directory of your project
Reopen the project and it will be editable now!