The data should go to one shard or it will be splitted between the shards?
Don't do that. :-)
There isn't explicit protection against that; in the future that would be a good improvement. Typically the mongod's in a sharded cluster are running on a different port number than the default so it is difficult to accidentally do that.
A sysadmin may wish to explicitly connect to such a server to inspect it -- that is fine as long as the operations are read only. You could also do administrative actions there such as a reindex and such.
Related
What's a quick and efficient way to transfer a large Mongo database?
I want to transfer a 10GB production Mongo 3.4 database to a staging environment for testing. I used the mongodump/mongorestore tools to test this transfer to my localhost, but it took over 8 hours and consumed a massive amount of CPU and memory, which is something I'd like to avoid in the future. The database doesn't have any indexes, so the mongodump option to exclude indexes doesn't increase performance.
My staging environment will mostly be read-only, but it will still need to write occasionally, so it can't be setup as a permanent read replica of production.
I've read about [replication sets][1], but they seem very complicated to setup and designed for permanent mirroring of a primary to two or more secondaries. I've read some posts about people hacking this to be temporary, so they can do a one-time mirroring, but I can't find any reliable documentation since this isn't the intended usage of the feature. All the guides I've read also say you need at least 3 servers, which seems unintuitive since I only have 2 (production and staging) and don't want to create a third.
Several options exist today (2020-05-06).
Copy Data Directory
If you can take the system offline you can copy the data directory from one host to another then set the configuration to point to this directory and start up the new mongod.
Mongomirror
Mongomirror (https://docs.atlas.mongodb.com/import/mongomirror/) is intended to be a tool to migrate from on-premises to Atlas, but this tool can be leveraged to copy data to another on-premises host. Beware, this connection requires SSL configurations on source and target to transfer.
Replicaset
MongoDB has built-in High Availability features using a replica set model (https://docs.mongodb.com/manual/tutorial/deploy-replica-set/). It is not overly complicated and works very well. This option allows the original system to stay online while replication does its magic. Once the replication completes reconfigure the replica set to be a single node replica set referring only to the new host and shut down the original host. This configuration is referred to as a single-node replica set. Having a single node replica set offers benefits over a stand-alone installation in that the replica set underpinnings (oplog) are the basis for other features such as change streams (https://docs.mongodb.com/manual/changeStreams/)
Backup and Restore
As you mentioned you can use mongodump/mongorestore. There is a point in time where the backup must be restored. During this time it is expected the original system is offline and not accepting any additional writes. This method is robust but has downtime associated with it. You could use mongoexport/mongoimport to use a JSON file as an intermediate step but this is not recommended as BSON data types could be lost in translation.
Per Mongo documentation, you should be able to cp/rsync files for creating a backup (if you are able to halt write ops temporarily on your production setup - or if you do this during a maintenance window)
https://docs.mongodb.com/manual/core/backups/#back-up-by-copying-underlying-data-files
Back Up with cp or rsync
If your storage system does not support snapshots, you can copy the files >directly using cp, rsync, or a similar tool. Since copying multiple files is not >an atomic operation, you must stop all writes to the mongod before copying the >files. Otherwise, you will copy the files in an invalid state.
Backups produced by copying the underlying data do not support point in time >recovery for replica sets and are difficult to manage for larger sharded >clusters. Additionally, these backups are larger because they include the >indexes and duplicate underlying storage padding and fragmentation. mongodump, >by contrast, creates smaller backups.
FYI - for replica sets, the third "server" is an arbiter which exists to break the tie when electing a new primary. It does not consume as many resources as the primary/secondaries. Since you are looking to creating a staging environment, i would not recommend creating a replica set that includes production and staging env. Your primary instance could switch over to the staging instance and clients who are meant to access production instance will end up reading/writing from staging instance.
We are currently setting up our mongodb environment for production. At the moment we only have one dedicated mongodb database server. We will expand this in the near future with a 2nd server and I already indicated to the management that for the ideal situation we should get a 3rd server as well.
Since I already know we're going to use sharding and replication in the near future I want to be prepared for it.
The idea I have now is to start now with the Development Configuration (as mongo's documentation names it).
Whenever our second server comes available I would like to expand this setup to a configuration with 2 configuration servers en 2 shards (replica sets).
And of course when our third server comes available have the fully functional sharded cluster configuration.
While reading mongo's documentation I was getting triggered by the note that de Development setup should not be used in production.
MongoDb Development Configuration
Keeping in mind that we will add more servers soon, would it be a bad idea to already configure the Development Configuration already so we can easily add the 2nd server to the cluster when it comes available?
After setting up the 'development sharded setup' I've found my anwser. Of course i'm happy to share in case anybody runs into the same questions as I do when starting with this.
In my case, it was ok to start with the development setup untill my new servers arrived. It was a temporary situation and when my new servers arived I was able to easily expand my replicasets. There are a number of reasons why this isn't adviced for production:
To state the obvious, there is no replication yet. Since I was running shards on one machine there is a single point of failure. If the machine, or one node goes down, the cluster won't work anymore.
Now this part is interesting. After I added a second server, I did have primary and secondary nodes. Primary nodes were used for writing and secondary for reading. I've eliminated the issue that there was no replication AND my data had a higher availability. However, I noticed with the 2-member replica sets, if one member of the replicaset went down (even is this was a secondary), the primary stepped down to a secondary node as well. This had to do with the voting mechanism that MongoDb uses. See Markus' more detailed answer on this.. Since there are no more primaries in the replicaset, my cluster won't function anymore. Now, if i were to use an arbiter I could eliminate this problem as well.
When you have a 3-member replicataset, automatic failover kicks in. Whenever a node goes down, another primary is assigned automatically and the cluster will continue performing as before.
During my tests I also got to a point where one of my MongoD.exe instances stopped working due to a "Out of memory exception". I was running a cluster with 3 replicasets, meaning every machine had at least 4 mongod.exe processes running (3 for the replicaset shards and one for the configuration server replicaset). Besides having a query which wasn't optimized yet I also noticed that the WiredTiger storage engine by default can use up to 50% of ram minus one gigabyte. Perhaps it wasn't the best choise to have multiple replicaset-shards on one machine but I was able to eliminate the problem by capping the wiredtiger memory usage.
I hope this answer helps anybody who's starting to set up replication and sharding for MongoDb.
Should I keep the replicasets and config servers on separate servers? Or have one replicaset and one config server on one server? Can I have all replicasets on one server and all config servers on another one server? (Does this defeat the purpose of sharding?)
The purpose of sharding is distributing load on multiple servers. The purpose of replication is (mostly) redundancy by allowing one server to take the place of another when that server goes offline for some reason. Obviously, it does not make much sense in either case to run multiple instances on the same server. So yes, it would defeat the purpose of sharding.
However, when you only have two servers and have to choose between replication and sharding, you can get the best of both worlds by creating two shards where each shard has a secondary which runs on the server of the primary of the other shard. That way you have both the performance-improvement when everything is OK but don't lose access to half your data when one server goes down.
Regarding the config servers: MongoDB recommends to make them a separate replica-set which runs on separate servers. But when you are on a budget, it should technically be possible to put that replica-set on the same hardware which runs the actual database. The config servers are only required when a mongos process (re-)starts or when a chunk migration happens and are relatively idle the rest of the time. Unfortunately a chunk migration is also a phase where the involved shards are very busy, so running the config servers on the same hardware will make performance drops during chunk migrations even worse.
I'm running 4 vms (centos) on a single machine (Windows 2008 R2). The 4 vms are setup as below:
1 mongos
1 mongo configure server
2 mongod as sharding servers
OK, everything was fine before a power off accident. When the power came back, I did manually reboot all the VMs, and found the sharding setting is gone. I mean, the mongos can talk to the configure server, but somehow the sharding data is lost and it show the database is not sharded.
I setup the sharding based on documents from mongodb websites (e.g. running some command in mongo shell to enable sharding for the db and each collection). Do I need to do all the mongo shell commands again after rebooting? Or is it supposed to recover automatically once the sharding is enabled?
Thanks.
Once you've established a sharded cluster, it is certainly supposed to stay configured, even if servers fail, even if they all fail at the same time. Restarting the servers should bring everything up just the way it was before the outage. Based on your description, it is difficult to reason what might have gone wrong. A dump of the config database, and the log files of all the affected servers, would be necessary to analyze what happened. This should perhaps be filed as a ticket with MongoDB support.
(It is, by the way, recommended to run three config servers rather than a single one, for availability reasons. But even so, even a single server should recover just fine after having failed. The three-server recommendation is only to make sure that there's always a live config server even if one of them should fail.)
I am developing a server to a customer who has only one machine for his production deployment.
It's a CentOS 64bit with 8Gb of memory.
I am using Mongo and the question is, do I still need to deploy a replica set even though it's a single machine?
Will I get the advantages of a replica set or since it's a single machine it really does not matter and journaling is enough?
You definitely have to enable journaling (It will ensure consistent state even in cases of HW failure scenarios, you will not have to run costy repair command after a crash). You should enable RAID under the data directrory (Anyway this is in general recommended), while here will be crucial not to lose data due to a disk failure (You do not have copy on an other box or so). There is no option for HA within one box it is quite straightforward, however it is not harmful, and in some cases useful to configure 1 node (1 mongod) replicaset (Than you will have oplog). This will help for example when you likely to have MMS backup, or just for enable point in time backup feature of mongodump. Later if you will likely to scale out for HA this way you will only have to add the new nodes to your initially established replicaset.
Make no sense to run several replicas inside one box, while they will race on HW resources and will bring nothing as an advantage.