I'm trying to install the latest Moles/Pex 0.94, but the install is unable to uninstall the previous version because it cannot locate pex.powertool.x64.msi. I searched for this file on multiple computers here, but can't seem to locate it anywhere. Is this file available somewhere, or is there a way to manually remove pex/moles?
Related
I am currently trying to configure my synergy setup. All websites and installation guides just tell to use:
sudo apt-get install synergy
I tried that and it says "Unable to locate package synergy"
I tried downloading a .deb file for that and it said:
"dependency is not satisfiable: libqt4-network (>= 4:4.5.3)"
though I get the same "Unable to locate package libqt4-network" message when I just try to download it through the terminal. And even when I download some other synergy versions, I am always some 'lib' away from using synergy. Specifically libcrypto++6 and libcrypto++9.
Is there a way to download synergy for linux-mint 20?
Unfortunateley, Synergy seems to have changed to closed source.
Thus, Version 2.x builds are unlikely to appear in Open Source Package repos.
The old versions are built against Qt4, which is replaced by Qt5 in Linux Mint 20, thus you will not be able to install an old version, as you tried.
(I tried installing the above-mentioned package libqt4-network, but it depends on other qt4 packages and so on...)
However, it is possible to build the old synergy code using the new Qt5, as this guy did.
I hope someone will create a PPA for this, soon.
I am trying to build some source code on ubuntu 16.04 where one of the classes relies hierarchy_simplify_point_set.h header file, which is part of CGAL's point set package. After following instruction on the installation page, I have installed libcgal-dev and libcgal-qt5-dev via apt-get. The package manager has installed libcgal-dev 4.7 which should include the point set library. However, the particular header file seems to be missing (it seems to have some files from the point set library and not others - I am looking in /usr/include/CGAL). Does anyone know what I am doing wrong?
ps: For good measure, I have already tried uninstalling and reinstalling both the packages, but no luck.
This header has been introduced in CGAL 4.8 while it seems you are using CGAL 4.7.
You can get the latest version of CGAL here. Since the latest versions can be used as a header-only library, simply extract the release archive somewhere and set CGAL_DIR to that location when calling cmake to configure your example and it should work directly.
After I install a package in powershell by using
"choco install $package" where package is taken from a config file and would look like "WinRar" so I would be doing choco install WinRar, how do i get the exact path this package was just installed to?
For example when I am installing PhantomJS using this, it gets installed to C:\ProgramData\chocolatey\lib\PhantomJS\tools\phantomjs-2.1.1-windows and I as the developer know that, but since I need to add this to the env path, depending on which version the install command installs, the path will be different. I need to get the exact path so i can set the environmental variable to right place.
PhantomJS is just one example, but a lot of packages get installed into directories where their version is apart of the path and getting the path from the powershell install scripts would really be helpful.
Is there anything like this available for the package manager? I assume figuring out where the package just got installed to should be possible because I see it displayed on my terminal window, just don't know how to access it in powershell.
Thanks.
Currently there is not a way, but there is a thought to maybe provide back a list of package results with that information (along with more). That is still in a feature request so look for it to be developed in the coming months.
You could parse the Chocolatey output to determine where Chocolatey saw things get installed and we are working to make that detection even better.
I'm new to collectd and Riemann. Im essentially trying to direct collectd logs to a riemann server instance. I understand that I need write_riemann plugin installed. I tried compiling the source files for write_riemann available online, but it includes a file called "riemann.pb-c.h", which is no where to be found. Please help!
Download the binary. After running the build script, while running the configure script include "--enable-write_riemann", this should install it. I had a lot of dependencies missing on CentOS, which threw a lot of errors. Once they were installed, write_riemann plugin was compiled and installed. Another issue you might face while installing the dependency is not able to find the right packages for protobuf-c.I was using yum package installer. Go to sudo vi /etc/yum.repos.d/epel.repo and change enabled from 0 to 1. After this, the protobuf-c processor was recognised while running the configure script. This solved my issue. Hope it does yours too!
I'm unfortunately not very experienced in CentOS administration, and was hoping someone might be able to help me understand and get past a small hurdle. I was hoping to run yum update on the system, but ran into some Transaction Check Errors:
file /etc/php.ini from install of php55-common-5.5.11-1.el6.x86_64 conflicts with file from package php-common-5.3.3-40.el6_6.x86_64
file /usr/lib64/php/modules/curl.so from install of php55-common-5.5.11-1.el6.x86_64 conflicts with file from package php-common-5.3.3-40.el6_6.x86_64
file /usr/lib64/php/modules/fileinfo.so from install of php55-common-5.5.11-1.el6.x86_64 conflicts with file from package php-common-5.3.3-40.el6_6.x86_64
file /usr/lib64/php/modules/phar.so from install of php55-common-5.5.11-1.el6.x86_64 conflicts with file from package php-common-5.3.3-40.el6_6.x86_64
file /usr/lib64/php/modules/pdo.so from install of php55-pdo-5.5.11-1.el6.x86_64 conflicts with file from package php-pdo-5.3.3-40.el6_6.x86_64
file /usr/lib64/php/modules/pdo_sqlite.so from install of php55-pdo-5.5.11-1.el6.x86_64 conflicts with file from package php-pdo-5.3.3-40.el6_6.x86_64
file /usr/lib64/php/modules/sqlite3.so from install of php55-pdo-5.5.11-1.el6.x86_64 conflicts with file from package php-pdo-5.3.3-40.el6_6.x86_64
It sort of looks like it's saying that some newer version files are conflicting with older version files. Is there a standard way to fix this? I was mainly just trying to update so that I could install Java later, but wasn't expecting to run into these errors. If it helps, the server is mainly being used for hosting a few websites with apache and mysql. Thanks so much for any help, it's greatly appreciated.
Edit: To add some more clarification, I had previously edited the baseurl variable in the /etc/yum.repos.d/centalt.repo file, which was originally set to
baseurl=centos.alt.ru/repository/centos/6/$basearch
The reason I changed the location was because I was previously getting an error when trying to run yum update, mentioned in this other stackoverflow question https://unix.stackexchange.com/questions/132674/repository-metadata-repomd-xml-for-repository-mratwork-centalt which had an answer recommending replacing the URL with
baseurl=mirror.sysadminguide.net/centalt/repository/centos/6/$basearch
Is there a different url I should be using instead?
You have a non-official repository which provides the php55-* packages which conflict with the official php-* packages.
You currently have the php-* versions installed.
If you want to switch you can try manually installing the matching php55-* package for every php-* package you have installed in one yum command (though that may not work).
If it doesn't, you might need to remove all the php packages you have installed first and then install the php55 versions after that.