Thank you for reading this.
These are my first steps in the iPhone Ipad app programming.
In order to learn from scratch (and because I know my app would need dynamic views), I decided not to use Interface Builder.
My question is(regarding the fact that I don't use IB): how would one use Views and Controllers?
I think I understand the MVC concept as it is repeated over and over again in the tutorials I follow, but after the "MVC explanation" part, nothing is made to make it clear "on the field" and closer to the real world (Earth being Xcode here).
Worse, sometimes it seems that some tutorials mix these two concepts up and use one word to say the other.
I read around here a lot of questions (and answers of course) based on the matter but I still don't get it. Sometimes it's too generic, sometimes it's too specific (for me at least).
For what I think I understood, the UIView is the static View when the View Controller is the logic which links the View to the data and those 3 concepts must be separated.
This separation, while a bit clearer with the use of Interface Builder seems to get quite blurry when you code everything as it becomes a virtual soup.
Technically, should I create a specific ".h" and ".m" file for each View AND ALSO for each associated Controller?
If I understand the MVC pattern, it's seems that I should but when I follow tutorials (without IB) it is never the case, view and controllers are created and manipulated within the same implementation files.
Any high level (I'm a noob, don't forget) but still applicable explanation of the use and best practices?
Let's say I want to create a simple app with a green view I can swipe to get to a red view.
I know for sure that I would need at least an:
xxxappDelegate.h
xxxappDelegate.m
xxxView.h
xxxView.m
What else?
1)Where should I put the the second view (along with the first one in "xxxView" or should I create another class h and m file?)?
2) What would the controller(s) do, for that kind of application? In which files would they be created and in which files would they be invoked and how would they "control" the related view?
3) Mainly, regarding to MVC pattern and the fact that there would be no IB, how would you organize that app?
I know it's a lot if you go into the details and code but that's not the point here.
Thank you. This - as simple as it seems - would be of a great help and is not as easily found in tutorials as you might think.
I understand the tutorials I read but they are so particular. As soon as I try to create something on my own which is not a "Hello World" screen, I realize that something is missing, logic wise.
Thank you very much for your help.
Sorry, but I can't get past your first paragraph. If you don't use Interface Builder, you are not going to be a successful iOS programmer. It's that simple. The best advice I've ever read about this is in this Aaron Hillegass interview:
Experienced Cocoa programmers put a lot of the smarts of their application in the NIB file. As a result, their project has a lot less code. Programmers who have spent a few years working in Visual Studio get freaked out. They ask me stuff like, "Can I write Cocoa apps without using Interface Builder? I like to see the code. Maybe I can just explicitly create my windows and the views that go on it?"
It is difficult to explain how the NIB file (and a few other scary ideas) create leverage. It is that leverage that enables one guy in his basement to compete with a team of engineers at Microsoft or Adobe. It is like I showed a chain saw to a early American colonist, and he said, "Can I cut down the tree without starting the engine? I don't like the noise. Maybe I can just bang it against the tree?"
Yes, it's hard to generalize after reading specific tutorials, but you will learn. I thought the learning curve was insurmountable when I first started, but if I can become a programmer that gets paid to write Cocoa software, you can too. Just keep reading and practicing. Don't fight the tools--use them.
Early:
In order to learn from scratch (and because I know my app would need
dynamic views), I decided not to use Interface Builder.
Later:
As soon as I try to create something on my own which is not a "Hello
World" screen, I realize that something is missing, logic wise.
I think what is missing logic wise is that you have accepted your assumption that Interface Builder was a crutch and that to learn "from scratch" you had to avoid using it. You are trying to learn the MVC design pattern but you are not willing to use the tools that have been designed to support it.
In Apple's own documentation they discuss the fact that sometimes there is value in having combined roles—Model Controllers and View Controllers—and that is worth reading, as it may explain some of the code examples you're reviewing. But my primary advice would be: before assuming you know better than the people who built the tools, trying using them the way they recommend. It might be an eye-opener.
Additions later:
OK, so to try and actually answer your questions...
1)Where should I put the the second view (along with the first one in
"xxxView" or should I create another class h and m file?)?
If I am understanding correctly and the two views you are thinking of here are the red and the blue displays to the user, you wouldn't have a second view—what you would do, whether in IB or in code—is to have an element in your view on which you changed a colour property... This would be done programmatically whether you were setting up the parent view in IB or in code.
2) What would the controller(s) do, for that kind of application? In
which files would they be created and in which files would they be
invoked and how would they "control" the related view?
There would be a view controller that would implement the gesture support, and would provide a method for changing the colour of the item in the view between blue and red when that swipe gesture was successfully received. I would have a ViewController.h and and ViewController.m. I think if you were implementing the View entirely in code, it would be implemented in the ViewController.m rather than having a separate View.m. (If you were using IB, you would have a ViewController.h, ViewController.m and ViewController.xib, with the latter providing the basic setup of the view elements and layers.)
You would create a ViewController instance in your AppDelegate.
3) Mainly, regarding to MVC pattern and the fact that there would be
no IB, how would you organize that app?
As above.
If you really insist on going without IB (and I agree 100% with SSteve) then in addition to the files you list you will also want to use a UIViewController. Now, it is important to know that you only need to create header and implementation files when you are adding or changing default behavior.
In you case, the view can probably just be a generic UIView, so you wouldn't need the files. What you would do is subclass UIViewController, and put the swipe logic there. In the swipe logic code you would probably just change the background color of the view.
You would instantiate the view controller in the delegate (in this case anyway) and create the view in the view controller's loadView method. That is required since you won't be using IB.
Personally though, I think that IB does a great job of encouraging proper MVC patterns, and if you are just starting then you should go with IB.
In practice you mostly do not make classes for views, unless they need to do custom drawing or display.
For lightweight configuration of views, that is often done in the viewController's viewDidLoad (or I guess in your case loadView) method.
Yes it's a good idea to keep model and view separated, but that's also balanced with the equally good idea to reduce the amount of code that exists. The less code that is written, the fewer bugs you will have.
Since you are just starting out at this point I would absolutely start by using ARC, and using IB - even though I'm sure you're tired of hearing that from everyone, I'll give you an alternate take. Less code means fewer bugs. And the fact that so many experienced developers are telling you to use it should be a giant clue about what a productive path forward is. I mean, are you doing this to build applications or learn every corner of the UIView class?
To speak to your code example, you do not need the UIView custom class. Just create use a UIViewController's main view as a container view, place a UIView inside with the background set to red. On swipe (using a gesture recognizer attached to the container view) call the UIVew method to swap in a new green-background UIView for the existing red view, you can even define the transition style.
Or create a scroll view in the container view, set up the red and green view inside the scroll view, set the content size and enable paging on the scrollview.
Or create a custom UIView class as you had, listen for touch events and slowly adjust two subview positions to follow the drag action.
Or use an OpenGL backed view, and based on the gesture recognizer pan the scene you are observing with two triangles for a green rectangle and two triangles for a red rectangle.
Related
If i wanted to create a system whereby you could display a little rectangle ON TOP of an app already running, in which I could put any number of things, what would be the best, most apple standard way of doing it?
I'm thinking of something similar to iAdd. basically layers of views I suppose. I know that microsoft has a standard war of coding game menus for example. they're layered - each one has various event handlers for when things start and finish and they're own little update / load / draw methods etc that get called when appropriate. is there something similar for apps?
The most important thing really is just the starting point. what should I be doing in order to create another view over the existing one?
All UI elements in iOS inherit from class UIView. To add one view inside another use [view addSubview:subview]
For detailed information about how to use the UIView class, see View Programming Guide for iOS
I want to decide if it is better to use XIBs or to designs my views completely using code.
So far I have read that when you design your views on interface builder they are pre-built, so even if they use more memory the user feels everything is faster.
People say doing everything using code is harder but I find it to be just as easy, so I want to know if anyone has experienced some real speed gains when using nibs.
What have been your experiences, advice, etc?
Thanks!
You should be able to do both -- there are times when building a view programmatically is better/easier, and times when using a .xib is better/easier. Even if you only ever do things one way, you'll run into code that does it the other, and you'll need to be able to deal with that.
If you don't know how to use IB, then building your views in code is certainly easier. That is why you should learn to use IB. Once you understand IB, it's way, way faster to put together most of the view-based UI your app will likely need. IB helps you line things up, center objects, align base lines, connect controls to their targets and actions, etc. I think it's safe to say that everyone who uses IB effectively experiences "real speed gains when using nibs."
You should know how to use both. Performance differences between the two are negligible and should not be the reason that you choose one or the other.
Many people who are new to iOS development have the misconception that nibs (.xib files) are inferior to programmatically creating your UI and that if you use IB you're not a good iOS developer. That view is 100% wrong. IB is created by Apple and in use by Apple's developers to create their own Mac OS X and iOS apps. If IB (as a tool) is good enough to be used by some of the best developers in the world, it's probably good enough for most of us.
In practice I have found that a combination of the two usually fits the bill.
In my own apps I find that .xibs are great for laying out the basics of your views quickly and they allow you to iterate very quickly while giving you a preview of what your view will look like. It's also much easier to use auto layout in a .xib file.
Then when you need to do more advanced things like add fancy animations or move views around that is what IBOutlets are for. Anything that you put into a nib can be referenced through an IBOutlet. This allows you do then programmatically make your view come to life.
Lastly, you should fully understand what a nib (.xib) is doing automagically for you. You should understand what happens when a .xib's objects are unfrozen. There are many resources on the internet to understand .xib files better.
Also, learn how to use .xibs in an encapsulated way. For example, .xibs are crazy useful for things like prototype cells and they allow you to keep your code base modular (much more so than storyboards). Also, you will require less UI code in your view controllers.
Lastly, I always say that people should think of IB/.xibs like jQuery. It's going to save you a lot of time but the best developers still know how to do everything in javascript if they have to.
Good luck and have fun!
TL;DR version
Performance is not a consideration when deciding to use .xibs or not.
Use .xibs because they give you a preview of the view you are creating and they allow you to quickly iterate
In practice most apps will use a combination of both. You will programmatically add animations or move views around but the .xibs will be a starting point
Understand fully what happens when the objects in a .xib are unfrozen
You'll be more productive but be sure you fully understand what is happening behind the scenes.
I would always use XIB files unless there was a reason not to. This allows your views to be maintained easily in the future.
Some reasons for creating the views programmatically might be:
A control needs to be resized,
repositioned or otherwise altered
depending on something else
Controls
need to be added or removed
dynamically
There may be more reasons but there are not too many.
If you programmatically create views when there is no need you make it a lot more difficult for other developers to try to figure out what the view will look like and to change it.
If you build your views programmatically, you have control over the loading of elements. e.g. you could use lazy loading, and load secondary buttons, subviews, etc. a fraction of a second after the more important elements, allowing the key parts of the UI to come up faster. You could even animate some elements into position.
If you use IB, you get guides as to proper element spacings and positioning, but you could always copy the coordinates from IB into code if you aren't changing the design that often.
For simple UI elements, you will end up with more lines of code to maintain if you create them programatically.
IB and NIBs do a lot to optimise loading/unloading of views, but it is largely oriented to minimising memory usage vs. perceived speed for the user. For example, lazy loading if anything might make the app UI slightly slower, but it should make memory usage lower. This in turn could make overall app performance better on a large application, and is very much encouraged, but it's difficult to define "performance" in a narrow way. It's also difficult to say when you should or should not use IB - there will be some times you're much better off doing it in code.
One often overlooked element to the IB or not debate is development speed, especially if you have multiple developers. On a larger team/project you'll probably have some developer(s) who specialise more in the infrastructure, business logic etc. of the app and some developer(s) who specialise more in the UI. In this case, use of IB will make it easier for them to work independently, which should make overall development more efficient.
I view IB as a core part of the development platform for iOS development. It's not the right solution in every situation but not knowing how to use IB will be a real limiting factor.
I'm the programmatic guy, and I simply don't want to use Interface Builder. I feel out of control, and besides that my GUI is about 90% custom all the time.
Literally every book does everything in Interface Builder and claims that this is the one and only great way to have real MVC going on.
Example: One of those books mentions that programmatically creating an UINavigationController with an Root View Controller and everything else that belongs in there is a big mess and won't be reusable when porting to the iPad, while doing this in XIB is a clever decision. Then the port to iPad using UISplitViewController will be a simple task.
So when I make iPhone apps and want to port those to the iPad too, what strategies work to reuse as much code as possible? I'd like to learn more about how to separate my code and achieve a better overall architectural design without using Interface Builder.
For those who want to tell me I must go with IB: Again, I do a lot of custom UI where IB is often just in the way. And not to mention all the animations. I really have my reasons. For people who make default UI IB is really fine - but please, I don't want to start a fight for IB vs programmatical UI or default UI vs custom UI! It's all about how to achieve great reusable code when doing everything programmatically, and both have their pros and cons.
Although you did not ask for it, I feel compelled to make the case for why people in general (perhaps not you) should consider IB, and then address the issue of custom components.
I use a lot of animations and custom components. And I love to use IB...
The key is to use IB for its strengths, and then decide what to do with the rest from there. What then are the strongest points of IB? Connections, placement, auto-resizing and customizations.
Connections are linking aspects of views and controllers together. It's faster in IB to drag out a few connections to delegates or references, than it is to write the code that forms the connections. And, it's a quick place to review all links to the UI you are building.
Placement IB also does well at. There's a fair amount of code involved in setting up any GGRect correctly. Not only is it easier to enter and review coordinate and size details in IB, but the tool automatically sizes a lot of elements properly for the container and the control, and offers many guides to help things line up properly - that kind of thing can take a lot of repeated testing to get right.
Related is auto-resizing. Although I don't feel that many screens can actually have auto-reiszing rules that rotate the screen and come out the other side looking just right (I almost always do rotated views as a separate XIB file), there still are a lot of shifts that can occur in the course of running your application that make it really useful to have these defined just right. The best example of this is the enlarged status bar while you are on a call.
Lastly comes customization. This again can be a lot of tedious code to write; try setting up all of the properties on a UILabel manually and it'll have you yearning for quick changes in IB.
With all that said, what is a good approach to custom components? I like to use UIViews in IB screens, with the class type set to a custom UIView that then fills out the display at runtime. But at least IB helps me get composition, placement and auto-resizing just right with minimum fuss, and also wire aspects of that custom view into a controller.
The one thing that would really lend IB to use with custom components is if it would simply let me set values for any simple properties the custom view had - then I could adjust parameters like a corner radius or whatever else I had going on.
I urge you to think on IB a little more, as it's a huge productivity boost when used correctly. There should be nothing about IB that gets in the way, it's there to boost your output.
One book I really liked was Erica Sadun's iPhone Cookbook 1st edition. It did everything programmatically.
Unfortunately the second edition is bloated.
If you reuse lots of your custom UI objects, it would make sense to write a code which
reads a plist (or a more general XML file) specifying how the custom UI objects should be placed / animated
and then creates your custom UI objects accordingly.
It's like writing a mini-xib file format tailored to your UI objects; you can also feel that you're in control of everything, as an added bonus.
This is Cocoa Touch (et al), iPhone, XCode only.
After completing my first commercial iPhone app, I'm struggling a bit to find a way to start and expand an app from scratch which gives the most linear development (i.e., the least scrapping, re-write or re-organization of code, classes and resources) as app specs change and I learn more (mostly about what Cocoa Touch and other classes and components are designed to be capable of and the limitation of their customization).
So. File, New Project. Blank window based app? Create the controllers I need, with .xib if necessary, so I can localize them and do changes requested by the customer in IB? And then always subclass each class except those extremely unlikely to be customized? (I mean framework classes such as UIButton, CLLocation etc here.)
The question is a generic 'approach' type question, so I'll be happy to listen to handy dev practices you've found paid off. Do you have any tips for which 're-usable components' you've found have become very useful in subsequent projects?
Clients often describe programs in terms of 'first, this screen appears, and then you can click this button and on the new screen you can select... (and so on)' terms. Are there any good guides to go from there to vital early-stage app construction choices, i.e. 'functions-features-visuals description to open-ended-app-architecture'?
For example, in my app I went from NavBar, to Toolbar with items, to Toolbar with two custom subviews in order to accommodate the functions-features-visuals description. Maybe you have also done such a thing and have some advice to offer?
I'm also looking for open-ended approaches to sharing large ("loaded data") objects, or even simple booleans, between controllers and invoking methods in another controller, specifically starting processes such as animation and loading (example: trigger a load from a URL in the second tab viewcontroller after making sure an animation has been started in the first tab viewcontroller), as these two features apply to the app architecture building approach you advocate.
Any handy pointers appreciated. Thanks guys.
Closing this up as there's no single correct answer and was more suitable for the other forum, had I known it existed when I asked :)
If you want to know the method I ended up with, it's basically this:
Window-based blank app
Navigation Controller controls all, whether I need to or not (hide when not used)
Tab Bar Controller if necessary
Connect everything <-- unhelpful, I know.
Set up and check autorotation, it might get added to some view later.
Add one viewcontroller with xib for each view, you never know when they want an extra button somewhere. It's easier to copy code than make the max ultra superdynamic adjustable tableviewcontroller that does all list-navigation, etc.
Re-use a viewcontroller only when just the content differs in it, such as a detail viewcontroller.
Minimize code in each viewcontroller by writing functions and methods and shove them in a shared .m
Everything that's shared ends up in the App delegate, except subclassed stuff.
Modal viewcontrollers are always dynamically created and never have an xib.
I have been programming with the iPhone SDK for some time now.
I have not been using Interface Builder. This scares me a little. I know that in effect I may be 'fighting the framework' but I do not see it that way.
I find it very easy to just instantiate my UITabBarController in my app delegate, instantiate a UINavigationController, then push and pop view controllers as I go.
Naturally I do not have an extensive knowledge of how to architect an app with XIB files because I have never done so, however I do know the general gist of it, having built some Mac apps in Cocoa using NIBs. So I am not completely ignorant.
My question is whether there is an increase in development time when choosing to lay out UITableViewControllers and UIViewControllers using XIBs rather than programmatically instantiating them and then setting up the ivars.
As I see it, both methods still require you to subclass the view controller for customization which will probably occur for the majority of your views. As well, there are still manual classes required for delegates, and the process of connecting outlets from within the XIB seems comparable to me from setting an ivar.
Or am I missing some other major point?
Thanks!
Code takes much longer to write to configure UIs than IB does.
Plus, you can hand off design to designers and let them tweak the UI.
In the end they both accomplish the same thing. You should use either one depending on the circumstances. Most of the time writing the code to create and position views, and especially maintaining it down the road, will take much longer than using IB. In a simple app for the iPhone though, this might not be true and you'd be just as well off creating everything in code. Basically, you should know how to do both, and pick the path that involves the clearest code and quickest development.
IB shines when you're using it to actually lay out views; even two or three views can be a real hassle to lay out and configure in code. I do tend to use it for tab bar and navigation controllers, and sometimes for subcontrollers (usually only if I think the user is very likely to use it), but that's more just because I'm already there so I find it convenient.
With this new version 3 OS they're announcing next week, I'm hoping Interface Builder gains some of the flexibility it has in Cocoa, where you can add palettes for your own classes and even build up complex non-view data structures (by using custom palettes). We'll have to see, though.
Don't worry too much, IMO Interface Builder is a little over-rated too.
It's definitely useful for getting things up and running quickly, or if you have an app with a lot of screens that are tedious to setup, but you're not missing much.
For the uses you outline just doing things in code is fine, and possibly even a little easier to understand.
Laying out views, or custom cells though... then you get into a ton of font/color/position setting that quickly explodes into a lot of code, hard to maintain and tweak. Much easier to adjust what you want in IB in those cases.