For example let's say someone made an MMO. How would they test that their server can handle the load from iOS gamers? With the Apple's ad hoc distribution program only allowing 100 distributions I don't see how this would be done.
You wouldn't have to drive the load from the actual devices. For load testing, you can create a test harness that drives load on your server (whether it's sockets, http etc...). It just needs to drive load while you monitor performance characteristics (live counters) and find the first bottleneck and fix it. Repeat.
Approach and tools listed here:
http://en.wikipedia.org/wiki/Load_testing
Related
Can someone please point me in the right direction to create a Mac/PC server app that runs in the background and connects to an iPad app over the local WiFi network?
No matter how I phrase a search on Google it just brings up various apps like Remote Mouse and whatnot and no tutorials or even a hint of where to start.
I just need to send simple commands from iPad to computer over local wifi. A point in the right direction and I can likely fill in the blanks.
Thank you.
Thomas
EDIT: I am using web languages for the iPad version that I will build as a native app using open source tools.
OK, then. It actually depends on what you really need. I made the assumption you need real-time and perhaps binary data transfer.
Your best bet is to write your server application using standard C or C++ so it compiles on both as simply as possible.
If you want to avoid all the burden of writing a protocol for service discovery or asking users to enter the ip address of your server you will use a mDNS implementation for your server and your iPhone app.
If I were you I would try bonjour: http://www.apple.com/support/bonjour/
on iPhone You could start here: http://developer.apple.com/library/mac/#documentation/Networking/Conceptual/NSNetServiceProgGuide/Articles/PublishingServices.html
Once you have your sockets you will have to implement a networking protocol between your server application and your iPhone app.
You will have to be careful about byte ordering and little subtle problems with latency, disconnections and other problems inherent to networking and WiFi.
In windows you will want to register your application as a service and in Mac OS X/UNIX you'll probably want to deamonize it.
Good luck!
can anyone help me to make the iphone app which can browse the files of the computer which is available on local network?
In short, you'll have to create a server on the local machine that is accessed from the iphone. On the iphone side, you'll have to create the client that accesses this server. Use google to see if you can find some examples of directory servers and see if you can adapt them to your needs.
This is a huge topic, one which cannot be answered here in 100 (or probably even 1000) words.
Edit
Think something like openLDAP
I want to send some Text plus a image from one iphone application to other iphone app but restriction is I should not use a web server in between communication,Is there any way to fulfill it ?
Details: There are two independent devices and could be far enough say out of network. My requirement one app adds some text with a image and sends it to another iphone which can be at any long distance , and the app installed in another iphone will read that info and image into itself.
Actually there is a solution that meets your needs — and that fits to bbums answer:
Create a HTTP-Server on the iPhone, using cocoahttpserver. than you will ask some webservice like whatismyip.com for your public ip. with this your iPhone can be connected worldwide.
But very likely ur wifi-network is not forwarding your port to the iPhone. Ash.
And even if: Now it gets difficult. How to publish your ip from one phone to the other? hmmm... — I got it: I will exchange the information in a centralized space! In the web!
... wait — that would be a Webserver.
You see: Without any kind of server in the Web the users would need to exchange ip manually and have full admin power and knowledge about the local network.
So IMHO bbums answer is the only way to go.
PS: I am working with http server running on iPhones. In local network that works great, especially with bonjour. And you can use them over distance network — but only with reconfiguration of your router — something you shouldn't force your user to do
There is far from enough information to provide a specific answer.
two apps on two different devices?
are the two devices on the same network?
are the two devices both on WiFi?
do you need the user to receive a notification or something if the app isn't running?
If on same device, you can define a custom URL handler in the destination app and then openURL: in the source app to pass the data over. Encode your image and text into the URL, but be careful of size limitations.
If on different devices, there are many possible solutions, but answering the above questions will be critical to actually knowing what solution is appropriate.
Given your comment -- two apps, different devices, arbitrary networks -- then you are going to have to have some kind of server in between. Note that the recently added Game Center does have the ability to rendezvous two users, but it has a very particular user experience that may not be appropriate to your needs.
I would suggest that you investigate using push notifications to notify the receiving user of the availability of content. As for moving the content between, no direct connection is possible and you will have to have some kind of store-and-forward server in between. And, yes, a web server is going to be the easiest possible solution simply because HTTP is ubiquitous these days.
If there's no network of any kind available, but both parties have amateur radio licenses, then hooking the two devices up to HF packet radios might work.
THIS is super EASY.
I would code up some software that can turn data into modem signal, like the good old dial up modem. The device would actually make those annoying buzzing sounds.
You get the phone number for your friends nearest landline and call him.
He places his iPhone near the phones receiver in listen mode and you connect to his phone using your audible modem.
Bingo, via the power of sounds you have sent data which is decoded on his device and all for the very cheap price of a phone call, there are pretty cheap these days especially if you use Skype.
Easy Way (relatively speaking)
A way two apps on different networks can communicate without setting up a web server of some sort is as follows.
Use an existing third party storage system like DropBox.
Each app would need the login and password for your DropBox. Then both apps can read and write files that the other app can see.
An existing app that does this is a shopping list app called ShopShop.
The app on my phone and my wife's phone both link to the same DropBox account and the app keeps the shopping list synced up when one of us adds something to the list.
I am writing an iPhone application and would like to sync data over Wi-Fi between the iPhone and a complementary Mac application which I will also be writing (much like what is accomplished with Things and 1Password). To provide specific context, I need to be able to upload a CSV file to the iPhone application, have the ability to edit the data on the iPhone, and then re-download that file to the computer.
I am familiar enough with the mechanics of parsing and editing the CSV file once on the iPhone, but I am unsure how to approach the Wi-Fi sync between the iPhone and Mac. Obviously this is possible, since other applications have achieved the same thing, but do I need to setup some kind of server on the iPhone (which the Mac can talk to) or maybe a server in the Mac-side application (which the iPhone can talk to).
Any suggestions would be greatly appreciated. Thanks in advance.
In my apps, I use CocoaHTTPServer to get local info into and off of the phone. You run the server and out-of-the-box, it indexes all the files in the documents directory.
To do what you want, you will need to edit the code to return some other kind of data format (xml probably is the easiest) the call this from inside your app to get that data. CocoaHTTPServer easily take POST right out of the box too, so you can post an xml response as well.
After thinking about it, CocoaHTTPServer is best run on the computer side behind the scenes. the iphone can then send info to the computer where handling the code should be easier and you have more options.
On top of this you will want to look into Bonjour, it will allow the computer and the iphone to discover each other without too much difficulty. (ie by advertising their info on the network)
For example, how would I write a program like senuti? Are there any libraries I can use for this? It would be ideal if I could do this in Python or .Net, but I'm open to other things as well.
There are three things you can do:
Add some code to your iPhone application which acts as some kind of server (http, SMB, etc). Then your mac/windows full client application can connect to this server over wifi. This is safe and reliable, but unfortunately the app will have to be running on the iPhone at the time of sync.
Sync to the "cloud". EG: Have your iPhone app save some data to a web server on the internet (you could use amazon EC2, windows Azure, or even just a PHP script running on a cheap hosting account), and then have your windows/mac client also connect to this web server to retrieve the data. This is the most user-friendly, but it requires you to pay for the hosting of the web server, and will be unsuitable for large amounts of data
Violate the EULA and try to reverse engineer the way iTunes communicates with the iPhone.
This is how senuti works, but I wouldn't recommend it, as they're constantly having to play catchup with apple changing the format underneath them, and they are probably exposed to some kind of legal action, if apple ever bothered to sue them.
i believe Version 3.0 will resolve this as it allows you to program apps to the USB interface. check out some of the documentation for that in the External Accessory framework.
it would still require the app to be open, so essentially would mean two syncs (or more if you have multiple apps)
There is no legal / official way of doing this. Creating a program that would sync with an iPhone would violate the EULA you agree to when using the iPhone and iTunes.
Not only is it illegal, but it's also impossible to do this reliably. Apple could break the method at any time without any notice, and it would pretty much be a cat-and-mouse game.
I only know of one application that something of the kind, and it is the iToner application which synchronizes ringtones.