I have an app where I have 5 sets of animations that I'm storing in an array. The animations get picked to play randomly after a button touch. This is all working perfectly, however I noticed a bug when I quit the app and reopen immediately, I'll see my main view, then it'll jump to my second view that has the animation in it. (This shouldn't happen since you have to tap the main view in order for it to modally swap in the second view. If I interact with it everything works for a few seconds, then it closes with no crash log.
I finally realized that some of the objects must not be getting released fast enough, since if I close the app and wait three seconds, then reopen, everything executes fine.
I didn't want to put down code to show as this is more of a brainstorming question. I'd love any insight that could point me the right way. I changed a lot of my code to get rid of convenience methods and have all my variables defined and then released in my dealloc.
Is there a way to truly tell the app to kill everything on quit? It's not set to run in the background so this is a bit odd. Thanks for your help I'm still new to this and learning!
Alright, after working on this all weekend and doing more research comparing a barebones version of my app to my prerelease version, I traced memory leaks to the Flurry Analytics api that I am using. Apparently I was suffering from the same issue as the post here: App hangs on restart with latest Flurry SDK and ios4 . I resolved this by setting these optional methods to false, since they take extra time to send data after the app terminates, and depending on the connection it takes a few seconds.
FlurryAnalytics.h
/*
optional session settings that can be changed after start session
*/
+ (void)setSessionReportsOnCloseEnabled:(BOOL)sendSessionReportsOnClose; // default is YES
+ (void)setSessionReportsOnPauseEnabled:(BOOL)setSessionReportsOnPauseEnabled; // default is YES
Hope this helps anyone else who experienced something similar to me!
All apps can enter the background by default. Normally they do not do anything there, but they stay there in a frozen state and when you open them again, your program does not restart, it just picks up where it left off.
Anything that's set as an animation delegate might not get released, since it's retained for that purpose until the animation completes.
You can add an applicationDidEnterBackground: method to your app delegate to get informed when your app is going into the background, but exactly what you need to do depends on the design of your app. You can also add applicationWillEnterForeground: to do anything you need to do differently when restarting, as opposed to newly starting.
You might be able to force your animations to complete by starting a new animation with duration 0.0 (or very short if for some reason you can't do that).
If this happens only if your app goes to bkgnd and comes back AND you don't mind if the app restarts everytime it comes back then just put UIApplicationExitsOnSuspend in your app's plist. In all my cases where these and other bad things happen with apps going to and returning from bkgnd this helped.
While you might still see the app on the buttom when double tapping it is really stopped and will restart. Apps that show on the buttom do not always have to run or be stored in the bkgnd I learned.
ps. don't forget to set the value of UIApplicationExitsOnSuspend to YES
Related
I came across the scenario where in if after moving the map immediately if I tap on back icon while the map has not fully loaded
The application crashes.
What I can understand is Since the loading is still in progress and I tap back the the application releases the controller but the google map loads asynchronously in NSRUNloop (not sure). So that might be the problem not sure though.
So does anybody know what can be the issue and is there any way to solve this issue?
Please comment if more description required.
It sounds like that when you close the view, the object that is the delegate for the completed map load has been deallocated, causing the crash with a bad access.
A good way to get to the bottom of these types of crashes is to use Instruments (part of the Xcode suite to tools) and go zombie hunting.
For anyone who is still searching for the answer
What exactly happening was that map view events were getting fired even if the controller was released causing a crash in the app.
So the solution is Before setting the value of objMKMapView to nil you need to set value of objMKMapView.delegate to nil.
In one of my apps when returning from background I get a non consistent behavior:
Sometimes I get the default.png and sometimes I get a snapshot of the last screen which the app was in.
In both cases it takes the UI a good second or two to respond again.
Therefore I would rather show the default.png rather then "unresponsive UI"
Is there a way to make the app display the default.png always until the app becomes active again?
Currently the "stupid" way to do it I thought about is by displaying some Modal view with the default.png and removing it on return to foreground.
Few Clarification:
I am doing this to avoid unresponsive UI.
I am using the default.png as it looks like loading and gives a better experience then unresponsive UI
The app has to run in background.
(And to whoever asked - no it is not closed when I sometimes return and see the default.png and not the last UI state - App loading from the start has a very different path and I'm sure of that)
Thanks in advance.
This is not a correct behavior and you may experiencing a bug. Basically as long as your app is in the background, when you launch it, you should not see the default.png, unless you remove it from background (double click on home button and delete that app).
For future people interested in this you can use the fact the last view in the app is used to be displayed when the app loads back.
You can display a VC as your moving to background which will represent some loading - hence achieving the desired behavior.
I've already seen a few other apps using the same behavior in cases operations are ran when coming back into the app.
Most probably, you are taking too long (performing too many calculations) in methods such as applicationWillEnterForeground:, applicationDidBecomeActive:, etc. As a simple test, try commenting out the code in these methods and see if the problem occurs again.
Simply set in your Info.plist the property "Application doesn't run in background" to YES. The app will never go in background and when the home button is pressed it will be simply terminated. So you're back to the pre-iOS4 behavior.
Note that when you see now the default image at start-up it is simply because your app has been terminated while it was in background. This is normal especially for apps that take a lot of memory and then don't free it enough before going in the background (I think the threshold for the OS is about 18MB but I'm not sure)
In my Universal-App i have some issues where the app crashes. I could not reproduce the cause of the crash so i want at least make the app "save" so that it can restart again if it has crashed.
Problem is, if my app crashes, it can happen that it cannot be started again due to some messed up user defaults.
So, if i could delete my user defaults after my app has crashed while starting, the user could at least use the app furthermore.
So far for my goals. Now i only need to know how i can detect and save it, when my app has crashed during starting.
My first intention was to set a flag in user defaults when the app crashes and then ,if the flag is set, to reset the user defaults. But i don't know if - (void)applicationWillTerminate:(UIApplication *)application
will be called when my app crashes. And even if it is called. How can i detect if it crashed during starting?
Any suggestions would be welcome.
Greetings and thx in advance
Maverick1st
What about setting a flag every time your app starts up and unsetting it when it terminates normally? That way you know if it is already set when the app starts, it crashed last time.
One of the things about abnormal exit is that is going to be, well, abnormal. It's usually not a great idea to rely on being able to do anything sensible in such cases.
Instead of trying to set a flag when you crash, which will at best be unreliable, how about instead setting it when you start and then unsetting it when you exit normally? That way it'll be left set if you haven't cleaned things up and you'll know next time you start.
One thought... wrap your main starting code in your app delegate in a #Try #Catch block to handle the exception causing the crash. Perform any last minute code there (like setting your flag).
When I launch the app on my 3GS it sits on the Default.png for 4-5 seconds. I'm not sure what it is doing during this time. I placed NSLog timing statements at the top of main and didFinishLaunchingWithOptions. The NSLog statement from main does not print to the console until the moment that Default.png goes away, and the entire process from the top of main to the bottom of didFinishLaunchingWithOptions only takes 1 second.
So, what is my app doing before it starts main, and what can I do to speed that time up?
Don't start from Xcode with a debugger, that takes a lot of time. You will see that your app starts much faster when you launch it via the icon on your homescreen.
I suggest you look at your plist file and xib files (not 100% sure if root view gets loaded before or after main, but worth a shot). Also, how big is that png file? Try launching without it and see how long it takes.
Does your application do this even when there are no other programs resident in memory? The reason that I ask: since you have observed that the delay appears to happen prior to entering main(), then it is possible that iOS believes that more memory is needed in order to run your program. If there are other apps in the Suspended state, then iOS could be busy waking those apps up momentarily in order to invoke didReceiveMemoryWarning on their view controllers, and perhaps ultimately tell them to go away by calling their app delegate's applicationWillTerminate:. Perhaps this is what is taking time.
One easy test you could perform would be to completely reboot your phone and then launch your app a few times without running anything else first. After the first invokation of your app, I would expect it to start quickly (unless your app, itself, allocates a lot of memory!).
If you didn't want to reboot your phone, you could manually remove all of the apps from your multi-tasking switcher by closing each one by touching the red minus signs that you can bring up using touch-and-hold. Then run your app and see if you are still seeing the 4-to-5 second delay.
So I׳m trying to play some effects in my Cocos2D game using SimpleAudioEngine , but after I have added them my app crashes when it goes to background (multitasked).
I searched for this problem in the internet but all the solutions that I found didn't work for me. What I did find out is that this problem happens because my app is somehow trying to play sounds when backgrounded.
In console it shows me (which is the same error I found other people had):
sgx error (background gpu access not permitted):
And another thing, when I run my app on the simulator, or even on my device while debugging carefully (going line-by-line with XCode while the app is running) this doesn't happen.
I just had this issue. I resolved it by having a bool to check if the app is running or in background that I set to true when the app goes to foreground ( applicationWillEnterForeground ) and that I set to false when the app goes to background ( applicationDidEnterbackground ) . So using the bool you can tell if the app is in the background and if it is, I just exit out of drawView function in EAGLView (thus not doing any graphics rendering which was causing the error).
I am a very dodge programmer but that method has worked for me and I hope it works for someone else. I did not need to unload and reload my sounds or anything and my app now has Multitasking XD
I was experiencing this, on about 25% of the occasions that my application re-entered the foreground. Like you, when I removed the sounds, the problem went away. That is how I came across your question here.
I may have found a solution to this. I have made what appears to be an unrelated change, but the problem seems to have gone away. Now, when my app enters the background, I invalidate my main scheduled timer. When my app re-enters the foreground, I then re-schedule the timer (after reloading my sounds, which I completely shut down on entering background).
So far, the problem has not come back. I would be interested to know if this helps.
I just resolved this issue on my end. Here's what was wrong in my case and, from what I can tell from the other answers and comments on this page, many other people's case as well:
By default, when I started my project, CCDirector::sharedDirector()->pause(); and CCDirector::sharedDirector()->resume(); were both being called twice, once by (void)applicationWillResignActive:(UIApplication *) and (void)applicationDidBecomeActive:(UIApplication *) respectively in AppController.mm, and once by AppDelegate::applicationDidEnterBackground() and AppDelegate::applicationWillEnterForeground() respectively in AppDelegate.cpp.
Make absolutely sure that these methods are only being called once, in AppController.mm. In AppDelegate.cpp, instead make sure that you are calling CCDirector::sharedDirector()->stopAnimation(); in place of CCDirector::sharedDirector()->pause(); and CCDirector::sharedDirector()->startAnimation(); in place of CCDirector::sharedDirector()->resume();.
Hope that's helpful to anyone else stuck in this crappy situation!
Are you sure it's related to audio? "background gpu access" sounds like it's using OpenGL.
I had the same issue in my application and spent some 4 hours to find out. Going background was OK the first time, but crash application the second time. With a short error message related to OpenGL. I had the same questions: how audio can crash graphics. But it wasn't a question of audio, but a question of notifications...
I discovered that going foreground was creating 2 timers in my custom level meter class.
I had registered UIApplicationWillEnterForegroundNotification and UIApplicationWillResignActiveNotification. Then, going background invalidated only one, since I registered only on notification... That was it!
One need's count its notifications!