I have this little problem, I have some key bindings like so C-. C-x or C-. C-m. After I activate the flyspell-mode, I cannot use these commands. In my .emacs file I have the next 2 lines before
(global-unset-key (kbd "C-."))
(define-key (current-global-map) (kbd "C-.") nil)
(global-set-key (kbd "C-. C-l") 'global-linum-mode)
Then, my C-. C-l works, but it does not when the flyspell-mode is activated. The command bound to C-. is flyspell-auto-correct-word. I tried to deactivate it as follows:
;; first try
(defun flyspell-auto-correct-word-disable() (define-key (current-local-map) (kbd "C-.") nil))
(add-hook 'flyspell-mode-hook 'flyspell-auto-correct-word-disable)
;; second try
(define-key (current-global-map) [remap flyspell-auto-correct-word] nil)
None of the tries work, what can I do? I tried in Emacs 23 and 24 and I have the same issue.
What about:
(eval-after-load "flyspell"
'(define-key flyspell-mode-map (kbd "C-.") nil))
Your first solution is almost correct, but you have to remember that the current local map is set up by the major mode, not minor modes. The best option you have it to directly access flyspell-mode-map and modify it (another option would be to find it in minor-mode-map-alist but I think it would be needlessly complicated).
Also, I prefer putting such mode-specific settings within eval-after-load (which means they will be evaluated once) rather than in a hook (in which case the settings are evaluated multiple times: each time one buffer activates flyspell-mode). But this is a matter of preference and either way is fine.
I'm trying to define the following two keyboard shortcuts to move between windows in Emacs:
C-shift-n: Move to the next window
C-shift-b: Move to the previous window
I thought the following will do it but it doesn't.
(defun select-next-window ()
"Switch to the next window"
(interactive)
(select-window (next-window)))
(defun select-previous-window ()
"Switch to the previous window"
(interactive)
(select-window (previous-window)))
(global-set-key (kbd "C-<S-n>") 'select-next-window)
(global-set-key (kbd "C-<S-p>") 'select-previous-window)
The problem seems to be with the last two lines that define the actual keyboard shortcuts to the functions that switch the windows (if I use simpler keyboard shortcuts instead of Control-Shift-* it works).
So, how do I use kbd to define Control-Shift-n and Control-Shift-p?
Assuming you never use caps lock, here's a super simple solution:
(global-set-key (kbd "C-N") 'select-next-window)
or
(global-set-key (kbd "C-<S-N>") 'select-next-window)
The problem is that when you hit shift you're sending capital N.
To put it simply, I'm trying to get scrolling in emacs like in vim and most other editors; when I'm for example, two lines from the bottom/top, and I press down/up (Ctrl-p,n, ↑,↓) it goes only one line up or down, not half the screen.
See some of the suggestions on the Emacs Wiki:
Emacs Wiki: Smooth Scrolling
(setq scroll-step 1
scroll-conservatively 10000)
If you want to position the screen exactly, you can use Ctrl-L.
By default it positions the current line in the middle of the screen.
ESC 0 Ctrl-L positions the current line at the top.
I'm a bit late to the party, but if you don't mind installing a package then smooth-scrolling (github, also available in MELPA) may be what you're looking for - it certainly works for me.
Once you've installed it you can pop the following in your init.el:
(require 'smooth-scrolling)
(smooth-scrolling-mode 1)
(setq smooth-scroll-margin 5)
The last line is optional; it starts scrolling near the screen edge rather than at it, so you've always got a little context around the point. Adjust to taste.
My solution is not to change Emac's default scrolling, but rather to create a key sequence command from a macro. This way you have a convenient way to scroll one line at a time when you want. Not ideal, but super easy. It just happens that M-(↓) and M-(↑) are available, so that's what I used.
This is how I did it. First, you need to record a macro for one line scrolls, up and down.
Begin macro
C-x (
Scroll down one
C-u 1 C-v
Stop macro
C-x )
For scroll up one, use
C-u 1 M-v
Next you need to name the macro.
M-x name-last-kbd-macro
Give it a name when prompted like:
down-one-line
Then just use the following to bind a key sequence to that command name:
M-x global-set-key
And upon prompting, use something like:
M-(down arrow)
Then it will ask you which command you want to bind, and you should give it the name you invented earlier, e.g., down-one-line.
Here is where I got this information. You can also find instructions below and elsewhere about adding your macro to the .emacs file.
Here for macro definition explanation
Here for how to control scrolling
I've been using these in my .emacs file since 2000.
(global-set-key (quote [M-down]) (quote View-scroll-line-forward))
(global-set-key (quote [M-up]) (quote View-scroll-line-backward))
This way, I can keep the Emacs default behavior as well as scroll one line at a time, depending on what I'm doing.
This worked till at least GNU Emacs 22. I recently upgraded to Emacs 24 and discovered that View-scroll-line-forward and View-scroll-line-backward are no longer available. After some hunting, I discovered that scroll-up-line and scroll-down-line work. So if you're using Emacs 24, you can use this.
(global-set-key (quote [M-down]) (quote scroll-up-line))
(global-set-key (quote [M-up]) (quote scroll-down-line))
I mostly skipped Emacs 23, so if that is the version you're using, you can experiment with both the above.
Note: scroll-up-line actually scrolls one line down, because the buffer is being moved one line up.
I rebind my arrow keys to perform scrolling operations.
(global-set-key [up] (lambda () (interactive) (scroll-down 1)))
(global-set-key [down] (lambda () (interactive) (scroll-up 1)))
(global-set-key [left] (lambda () (interactive) (scroll-right tab-width t)))
(global-set-key [right] (lambda () (interactive) (scroll-left tab-width t)))
Simples do this:
(global-set-key [M-up] (lambda () (interactive) (scroll-up 1)))
(global-set-key [M-down] (lambda () (interactive) (scroll-down 1)))
then meta cursor up moves up and meta cursor down moves down.
QED. Not sure what all the above people were smoking!
I have the following in my .emacs file to enable a nice ctrl-up, ctrl-down scrolling behavior. I also use this for the mousewheel.
(defun scroll-down-in-place (n)
(interactive "p")
(previous-line n)
(scroll-down n))
(defun scroll-up-in-place (n)
(interactive "p")
(next-line n)
(scroll-up n))
(global-set-key [mouse-4] 'scroll-down-in-place)
(global-set-key [mouse-5] 'scroll-up-in-place)
(global-set-key [C-up] 'scroll-down-in-place)
(global-set-key [C-down] 'scroll-up-in-place)
If you are looking for a quick way to create a scroll-like effect, enter in C-n and C-l sequentially which moves the cursor down and then centers it.
To have the "vim" scrolling put this to your .emacs file:
(defun next-line-and-recenter () (interactive) (next-line) (recenter))
(defun previous-line-and-recenter () (interactive) (previous-line) (recenter))
(global-set-key (kbd "C-n") 'next-line-and-recenter)
(global-set-key (kbd "C-p") 'previous-line-and-recenter)
Since it can be annoying to use the M-up, M-down because it interferes with the org-mode which overloads these commands. To avoid this issue I personally use those commands which combine M-page-up M-page-down". Here I defined the scroll up and down to 1 line.
;;;scroll by `number-of-lines' without the cursor attached to the screen
(global-set-key [M-prior] (lambda () (interactive) (let ((number-of-lines 1))
(scroll-down number-of-lines)
(forward-line (- number-of-lines)))))
(global-set-key [M-next] (lambda () (interactive) (let ((number-of-lines 1))
(scroll-up number-of-lines)
(forward-line number-of-lines))))
;;;scroll by `number-of-lines' with the cursor attached to the screen
(global-set-key [S-M-prior] (lambda () (interactive) (let ((number-of-lines 1))
(scroll-down number-of-lines))))
(global-set-key [S-M-next] (lambda () (interactive) (let ((number-of-lines 1))
(scroll-up number-of-lines))))
M-x customize-variable scroll-conservatively
Set it to 1.
You don't really want to do this, though.
If you don't mind using the mouse and have a scroll wheel, you can customize the variable mouse-wheel-scroll-amount by either:
C-h v mouse-wheel-scroll-amount (click on customize, change value to "Specific # of lines" 1, ApplyAndSave.)
or add to .emacs the line:
'(mouse-wheel-scroll-amount '(1 ((shift) . 1) ((meta)) ((control) . text-scale)))
There are lots of possibilities listed at
https://www.emacswiki.org/emacs/Scrolling
If you start emacs in .xsession, in my case setting scroll-conservatively to 100+ will not work, nor scroll-step 1. But if u start emacs after X, it works.
After playing a bit with the available configuration (emacs 26.3), I got to the following set of values:
(setq scroll-step 1
scroll-preserve-screen-position t
scroll-margin 10
scroll-conservatively 10
maximum-scroll-margin 0.0
scroll-up-aggressively 0.0
scroll-down-aggressively 0.0)
I believe the values for scroll-margin and scroll-conservatively do not matter much because the maximum-scroll-margin clamps them down. They just need to be equal (maybe?).
Scroll happens line by line, even on the end of the file (worst case for me). The only missing feature was that with this the margin on top and bottom are lost.
Its a compromise and, for me, smooth scrolling is worth it.
app on Mac OS X on a MacBook. Most applications on the computer allow me to scroll both vertically and horizontally with a two-finger drag on the trackpad. I would like to use this ability to position the cursor in emacs.
Adding the following lines to .emacs allows me to move the cursor vertically:
(global-set-key [wheel-up] 'previous-line)
(global-set-key [wheel-down] 'next-line)
I don't know of an equivalent setting for wheel-left or wheel-right. Can anyone help?
Put this in your .emacs-file:
;; Turn on horizontal scrolling with mouse wheel
(global-set-key (kbd "<mouse-6>") 'scroll-right)
(global-set-key (kbd "<mouse-7>") 'scroll-left)
When you first use it, emacs will ask you if you want to activate the restricted command scroll-left. That's just because some users find it confusing at first.
this slightly simpler version works for me:
(global-set-key [wheel-right] 'scroll-left)
(global-set-key [wheel-left] 'scroll-right)
or for osx reversed scroll directions:
(global-set-key [wheel-right] 'scroll-left)
(global-set-key [wheel-left] 'scroll-right)
(global-set-key (kbd "<mouse-7>")
(lambda () (interactive) (message "WHEEEEEL")))
That worked for me. Try C-h c and then scroll the mouse the way you intend to to see what event is triggered. It will tell you in the echo area.
In version 26.2 I can set these variables from the mouse customize group:
'(mouse-wheel-flip-direction t) ;; correct left-right scroll direction for OS X
'(mouse-wheel-tilt-scroll t) ;; enable left-right scroll from trackpad
In emacs 25.1 check out the *Messages* buffer when you swipe left and right on the trackpad. By the looks of it the key bindings are wheel-right and wheel-left with double and triple variants.
For example:
(global-set-key (kbd "<triple-wheel-right>")
(lambda () (interactive) (message "wheeling right")))
(global-set-key (kbd "<triple-wheel-left>")
(lambda () (interactive) (message "wheeling left")))
For me these values are not reversed in macOS
How do you use line-wrap (autoscrolling?) in emacs?
So that the portion that doesn't fit on the screen isn't shown as opposed to shown on the next line?
What you describe sounds more like linewrap than scrolling. If that's what you're actually interested in, it's controlled with buffer-local variable truncate-lines. You can use customization to set it globally, or use hooks. For example, I used to prevent linewrap in dired with this:
(add-hook 'dired-mode-hook (lambda () (setq truncate-lines t)))
toggle-truncate-lines allows you to turn it on-off (as Peter noted in a comment on this post)
I have it mapped to a function-key:
(define-key global-map [f5] 'toggle-truncate-lines)
It won't work in vertically-split (partial-width) windows unless truncate-partial-width-windows is set to nil (from my .emacs):
(setq-default truncate-lines t)
(setq truncate-partial-width-windows nil) ;; for vertically-split windows
You can also change this from the menu.
Options->Line Wrapping in this Buffer->Truncate Long Lines
Or if you want this globally you can use the function
global-visual-line-mode
i prefer these settings:
;; disable line wrap
(setq default-truncate-lines t)
;; make side by side buffers function the same as the main window
(setq truncate-partial-width-windows nil)
;; Add F12 to toggle line wrap
(global-set-key (kbd "<f12>") 'toggle-truncate-lines)
;; Wrapping the lines
(global-set-key (kbd "C-x p") 'toggle-truncate-lines)
This works with Emacs-27.1