Is it possible to set up a remote NetBeans C++ project where the source files are only accessible via SSH?
My project needs to build on a Linux box, but I'd like to develop it on a Windows machine.
Checking out the code via SVN to my Windows machine is not an option since there are a few files that differ only by case, and NTFS is not case sensitive (unfortunately, I can not change them).
I'm well aware that Windows can be kind-of forced be case-aware and the ideal solution is to just re-name those file to something sane.
However, I'm just trying to solve this using NetBeans. Since it's a remote project anyway, why bother to keep any files locally.
Thanks
Currently, no. In general programming files with different cases of the same name is a bad practice.
You can enable case sensitivity in Windows - you may need to have a Professional version or better.
For Windows XP: http://support.microsoft.com/kb/817921
For Windows 7: http://technet.microsoft.com/en-us/library/cc732389.aspx
See also: Windows Services for Unix
Another solution would be to setup VNC/RDP on the remote Unix system. The overall solution should be to conform to a better file naming convention:
Programmer 1: "Hey man, take a look at noCamelCase.cs - I just rewrote it."
Programmer 2: "Um, nocamelcase.cs is blank."
There are two ways of doing remote builds with Netbeans. The first, the project is stored locally. You just create a regular project and on the 2nd page of the wizard you specify the network directory with the source and the remote build host. I've used this for Solaris client to Linux server, but not from Windows as we don't have the mounts exported by SMB. This uses ssh and some shared lib interposers to get the build info.
The second way is to create a remote project. In this case the project is created on the remote host and date is copied on demand to the client. I've only doe a few tests with this as I preferred the first method as it had much better latency.
Lastly, you could either use vnc or install X on your windows machine and do everything on the Linux machine.
Related
I'm working remotely and I need to access files on a server that's only accessible through ssh from another machine.
For example if my files are on server2, I need to ssh me#server1 then once I'm on that machine, ssh me#server2
Is there a way to set up remote systems in eclipse (I'm using Zend Studio) to get access to my files?
Thanks.
The short answer is No, however you you do have some options...
Eclipse is only aware of files in an Eclipse workspace (with some exceptions), thus you need to make your files available to your Eclipse instance. To do so, you could download the remote files and make them available locally or make te files accessible via a network share.
All in all, you need to make those files available on a file system visible to the local Eclipse instance. Once that is done, you can add/import the file into your Eclipse workspace.
Is it possible to set the path where the berkshelf plugin puts the cookbooks it installs? (As in the .berkshelf folder)
I am running Windows 7.
I am currently trying to install a mysql server using an opscode cookbook to a vm and here at work they have the %HOMEDRIVE% system variable set to a network drive. So when .berkshelf starts at the beginning of the Vagrantfile, it pushes the cookbooks to the network drive and it causes it to be slow and well, its not where it should be. Is there a fix to this?
VirtualBox did this as well, but I fixed it by altering the settings. I tried looking for some sort of equivalent settings for berkshelf, but the closest I got was for the standard berkshelf (thats not a vagrant plugin), it appears you can set this environment variable:
ENV['BERKSHELF_PATH']
Found here:
http://www.rubydoc.info/github/RiotGames/berkshelf/Berkshelf#berkshelf_path-class_method
I need to be able to have the cookbooks it reads from the berksfile store to my laptops local drive instead, as in my scenario I cannot have the mobility of the VM limited to the building because of files that are stored on the network.
Any incite would be much appreciated.
Perhaps its better to use the actual berkshelf over the vagrant plugin?
Thanks.
If you want to have the portability - a full chef-repo ready for chef-solo runs, better off using standalone berkshelf instead of the vagrant-berkshelf plugin - which is NOT that flexibly.
For complex cookbooks, I prefer to use standalone berkshelf as it allows me to do berks install --path chef/cookbooks to copy all cookbooks required from ~/.berkshelf/cookbooks, then I can just tar the whole thing and transfer to other machines for the same chef-solo run. some people use capistrano automate the tar and scp/rsync over the network. I just use rysnc/scp;-)
HTH
I recently started a new job, where all development is done on a remote dev server. I really like Eclipse as a centralized development environment for all the different stuff I'm working on, and am not a particularly big fan of emacs or vi. I'll use emacs if I have to change something quickly, but after really trying to like it for normal development, I'm really starting to miss Eclipse.
That said, is there any way I can use Eclipse with EPIC for Perl development on a remote server? I can live without debugging functionality, but proper syntax highlighting, and the ability to create projects would be really, really nice. So far, I've tried using a remote browser plugin for Eclipse to peruse the remote dev server and open stuff into Eclipse that way, but it is far from ideal. Anyone have any better ideas?
Answering my own question (which no one seems to have looked at or care about, but what the hell-- maybe someone will have the same issue):
Grab Remote Systems Explorer from here.
Setup RSE to ssh into your remote server.
Create a new empty EPIC project (or using whatever plugin/ language you want).
Right click the project, select "New Folder," then
Advanced >> Link to alternate location (Linked Folder)
Switch file system to RSE, then just browse to some folder on your remote system you'd like to become a project, and add it.
That's it, you're done. Now when you open your project in Eclipse, you'll see that folder with all the code you wanted, and you can use it just like you would locally.
The main problem I'm seeing with this right now is that currently I can't get it to do any error checking, which is too bad. I'll work on finding a work around for that and update here if I do.
If you're on linux, you can also mount the remote drive/folder with sshfs and use the same "linked folder technique". I do this all the time for Java EE development. sshfs is also very reliable, unlike Windows network shares mounted on linux with Samba-Client. (Sometimes the Windows sharing service gets confused. And needs to be restarted on the remote server. I use a powershell one liner for this "restart-service -name 'sharing service' " or something like´that.)
What options are there for saving and retrieving documents to and from the cloud, from within Emacs?
I use Emacs at work, on a Windows machine, and at home, on a Linux box, so ideally I would want a solution that works more or less out of the box for both operating systems.
I touched on g-client, but could not quite get it to work. Obviously, if there are no other, simpler options, I'm just going to have to spend a couple of more hours on it.
Many thanks,
Andreas
Dropbox is pretty universal. I store even my Emacs config files there. Works on Windows, Linux, OS X, and iPhone. Syncs automatically. Stores history. Is free. What else do you want?:-)
Two options that I can think of:
If you have access to a server somewhere that runs ssh, then use ssh with tramp. You can also run a ssh server at your home linux box and access your home files through from work. Tramp works perfectly fine on Windows with ssh from cygwin. It will automatically grab a file (provided that you give emacs something like /ssh:yourusername#yourserverhost:~/yourfile), put it to a temporary file at your computer, then copy it back to the host when you save it.
Use a source control system like SVN or Git. Again you can host the server at your home or you can find online hosts (most are for open source and are thus public, but some are free and private; I use unfuddle.com). You would have to regularly commit/update, but you can easily automate that if you want, and the source control system gives you a nice history of your files and a safety net in case you did something very wrong.
Emacs has excellent integration with source control system. If you find the build-in one not sufficient (it is quite generic and thus does not offer interface to some specific features of a particular source control system), there are plenty of good alternative (psvn for SVN, and magit for Git, for example).
sshfs, if you have good connection speed.
Otherwise there's always tramp-mode for Emacs.
Edit: Just saw you are using Windows.
It's been some years since I used Windows as my desktop, but I used WebDrive back then. It sort-of works, although it always was a bit unstable.
Emacs has great support for remote file systems via Tramp. So the real question is what should you use as a remote FS. There are a bunch of them and as long as they have a way of mounting them or logging in via ssh (for Tramp) you should be ok.
I use JungleDisk - works great for Windows, Linux and Mac. Starts around $2 per month and there's a cap of around $90 per year. You can back up to S3 or to Rackspace.
It integrates at the file system level so you can either read/write directly to it or create links from it to your local file system. I use that to share my .emacs, .bash etc between multiple machines.
Chris
Does anyone know of a good way to do remote administration of a Windows XP machine using just the command line?
At the moment the only things it needs to do is to be able to install applications/patches, and transfer files to and from the machine, and installing registry patches would be nice as well.
Currently we use a horrible hacked together solution that uses NetMeeting, in the past I've thrown together a proof of concept using SSH for windows (at the time windows 2000) but it didn't work to my satisfaction and was pretty buggy. Which was probably the result of the SSH Daemon I was running more then anything.
I'm pretty much open to anything, however a solution using SSH would be ideal since it's already approved for installation in my organization, and it's free. I work in the Canadian Government so anything free is best, and anything that we've already got approved for installation is even better.
psexec will allow you to run commands remotely. Some of the other PsTools can help you kill applications, get a list of processes, etc.
Why must it be
remote administration of a Windows XP machine using just the command line?
I think your very limiting yourself to what is possible by sticking to the command line. In windows environments you can easily use Group Policy to distribute most software and/or patches, and for the ones that you can't you can usually script these changes through any of the popular scripting languages such as JScript, VBScript, Kixtart, AutoIt, Powershell, etc. With these scripting languages you can easily leverage WMI to exceute and mointor processes on remotes systems, copy files, updates registry...basically everything that you're trying to accomplish....and it won't cost you anything but the cost of learning these technologies, and there many online resources and which document how to do them. Here is a link to the Microsoft Script Center, its a great start: http://www.microsoft.com/technet/scriptcenter/default.mspx
I wrote this a while back, and used it to maintain my home windows XP desktop for a while:
ssh and telnet on windows
I used the SSH option (not telnet). It worked for my purposes (killing remote tasks, copying files etc.) It uses Cygwin, but you're able to run regular windows commands as well as the bash commands that come with cygwin.
The Software Testing Automation Framework (STAF) is designed for remote access, installing software, transferring files. etc. It's open source and you can write your own service if there isn't one that does what you need. It also has a GUI component for writing, scheduling, queueing and monitoring jobs across a pool of machines.
At the moment the only things it needs to do is to be able to install
applications/patches, and transfer files to and from the machine, and
installing registry patches would be nice as well.
try to download and install eurysco to use in order:
transfer file, applications and patches with multiple-upload feature from eurysco file browser
install applications and patches in silent mode from eurysco command line feature
edit registry from eurysco system-registry feature
http://www.eurysco.com/features