I'm trying to fetch data from PostgreSQL with Erlang.
Here's my code that gets data from DB. However i have cyrrilic data in 'status' column. This cyrrilic data is not being fetched correctly.
I tried using UserInfo = io_lib:format("~tp ~n",[UserInfoQuery]), however this doesn't seem to work, because it crashes the app.
UserInfoQuery = odbc_queries:get_user_info(LServer,LUser),
UserInfo = io_lib:format("~p",[UserInfoQuery]),
?DEBUG("UserInfo: ~p",[UserInfo]),
StringForUserInfo = lists:flatten(UserInfo),
get_user_info(LServer, Id) ->
ejabberd_odbc:sql_query(
LServer,
[<<"select * from users "
"where email_hash='">>, Id, "';"]).
Here's the data that is fetched from DB
{selected,[<<"username">>,<<"password">>,<<"created_at">>,
<<"id">>,<<"email_hash">>,<<"status">>],
[{<<"admin">>,<<"admin">>,<<"2014-05-13 12:40:30.757433">>,
<<"1">>,<<"adminhash">>,
<<209,139,209,132,208,178,208,176,209,139,209,132,208,
178,208,176>>}]}
Question:
How can i extract data from column? For example only data from
'status' column?
How can i extract data in unicode from DB? Should i fetch the data from DB then use
io_lib:format("~tp~n") on it? Is there any better way to do it?
Additional question: is there any way to get string in human readable format, so that StringForUserInfo = 'ыфваыфва' from RowUnicode?
I tried this:
{selected, _, [Row]} = UserInfoQuery,
RowUnicode = io_lib:format("~tp~n", [Row]),
?DEBUG("RowUnicode: ~p",[RowUnicode]),
StringForUserInfo = lists:flatten(RowUnicode),
Error:
bad argument in call to erlang:iolist_size([123,60,60,34,97,100,109,105,110,34,
62,62,44,60,60,34,97,100,109,105,110,34,62,62,44,60,60,34,50,...])
Erlang ODBC driver perfectly fetched the status column from your database. Indeed, PostgreSQL encodes your data is UTF-8, and the value you get is UTF-8 encoded.
Status = <<209,139,209,132,208,178,208,176,209,139,209,132,208,178,208,176>>.
This is a binary representing the string ыфваыфва in UTF-8.
You can directly use UTF-8 encoded binaries in your code. If you want to use unicode character points instead of UTF-8 bytes, you can convert this to a list of integers (a string in Erlang parlance). Just use unicode:characters_to_list/1, which in your case will yield list [1099,1092,1074,1072,1099,1092,1074,1072]. This is a list representation of the same string. Unicode character 1099 (16#044B in hex) is ы (CYRILLIC SMALL LETTER YERU, cf Cyrillic excerpt unicode chart).
Erlang can handle unicode texts in the two representations above: lists of unicode characters as integers and binaries of UTF-8 encoded characters.
Let's examine a smaller example, string "ы". This string is composed of unicode character 044B CYRILLIC SMALL LETTER YERU, and it can be encoded as a binary as <<209,139>> or as a list as [16#044B] (= [1099]).
Historically, lists of integers as well as binaries were Latin-1 (ISO-8859-1) encoded. Unicode and ISO-8859-1 have the same values from 0 to 255, but UTF-8 transformation only matches ISO-8859-1 for characters in the 0-127 range. For this reason, Erlang's ~s format argument has a unicode translation modifier, ~ts. The following line will not work as expected:
io:format("~s", [<<209,139>>]).
It will output two characters, 00D1 (LATIN CAPITAL LETTER N WITH TILDE) and 008B (PARTIAL LINE FORWARD). This is because <<209,139>> is interpreted as a Latin-1 string and not as a UTF-8 encoded string.
The following line will fail:
io:format("~s", [[1099]]).
This is because [1099] is not a valid Latin-1 string.
Instead, you should write:
io:format("~ts", [<<209,139>>]),
io:format("~ts", [[1099]]).
Erlang's ~p format argument also has a unicode translation modifier, ~tp. However, ~tp will not do what you are looking for alone. Whether you use ~p or ~tp, by default, io_lib:format/2 will format the Status UTF-8 encoded binary above as:
<<209,139,209,132,208,178,208,176,209,139,209,132,208,178,208,176>>
Indeed, t modifier only means the argument shall accept unicode input. If you do use ~p, when formatting a string or a binary, Erlang will determine whether this could be represented as a Latin-1 string since input may be Latin-1 encoded. This heuristic allows Erlang to properly distinguish lists of integers and strings, most of the time. To see the heuristic at work, you can try something like:
io:format("~p\n~p\n", [[69,114,108,97,110,103], [1,2,3,4,5,6]]).
The heuristic detects that [69,114,108,97,110,103] actually is "Erlang", while [1,2,3,4,5,6] is just, well, a list of integers.
If you do use ~tp, Erlang will expect strings or binaries to be unicode-encoded, and then apply the default identification heuristic. And default heuristic happens to currently (R17) be latin-1 as well. Since your string cannot be represented with Latin-1, Erlang will display it as a list of integers. Fortunately, you can switch to Unicode heuristics by passing +pc unicode to Erlang on command line, and this will produce what you are looking for.
$ erl +pc unicode
So a solution to your problem is to pass +pc unicode and to use ~tp.
I don't understand why io:format("~tp") doesn't work, but you can extract the row and column you need and print that with io:format("~ts"):
> {selected, _, [Row]} = UserInfoQuery.
> io:format("~ts~n", [element(6, Row)]).
ыфваыфва
ok
I have a normal string in Powershell that is from a text file containing Base64 text; it is stored in $x. I am trying to decode it as such:
$z = [System.Text.Encoding]::Unicode.GetString([System.Convert]::FromBase64String($x));
This works if $x was a Base64 string created in Powershell (but it's not). And this does not work on the $x Base64 string that came from a file, $z simply ends up as something like 䐲券.
What am I missing? For example, $x could be YmxhaGJsYWg= which is Base64 for blahblah.
In a nutshell, YmxhaGJsYWg= is in a text file then put into a string in this Powershell code and I try to decode it but end up with 䐲券 etc.
Isn't encoding taking the text TO base64 and decoding taking base64 BACK to text? You seem be mixing them up here. When I decode using this online decoder I get:
BASE64: blahblah
UTF8: nVnV
not the other way around. I can't reproduce it completely in PS though. See sample below:
PS > [System.Text.Encoding]::UTF8.GetString([System.Convert]::FromBase64String("blahblah"))
nV�nV�
PS > [System.Convert]::ToBase64String([System.Text.Encoding]::UTF8.GetBytes("nVnV"))
blZuVg==
EDIT I believe you're using the wrong encoder for your text. The encoded base64 string is encoded from UTF8(or ASCII) string.
PS > [System.Text.Encoding]::UTF8.GetString([System.Convert]::FromBase64String("YmxhaGJsYWg="))
blahblah
PS > [System.Text.Encoding]::Unicode.GetString([System.Convert]::FromBase64String("YmxhaGJsYWg="))
汢桡汢桡
PS > [System.Text.Encoding]::ASCII.GetString([System.Convert]::FromBase64String("YmxhaGJsYWg="))
blahblah
There are no PowerShell-native commands for Base64 conversion - yet (as of PowerShell [Core] 7.1), but adding dedicated cmdlets has been suggested in GitHub issue #8620.
For now, direct use of .NET is needed.
Important:
Base64 encoding is an encoding of binary data using bytes whose values are constrained to a well-defined 64-character subrange of the ASCII character set representing printable characters, devised at a time when sending arbitrary bytes was problematic, especially with the high bit set (byte values > 0x7f).
Therefore, you must always specify explicitly what character encoding the Base64 bytes do / should represent.
Ergo:
on converting TO Base64, you must first obtain a byte representation of the string you're trying to encode using the character encoding the consumer of the Base64 string expects.
on converting FROM Base64, you must interpret the resultant array of bytes as a string using the same encoding that was used to create the Base64 representation.
Examples:
Note:
The following examples convert to and from UTF-8 encoded strings:
To convert to and from UTF-16LE ("Unicode") instead, substitute [Text.Encoding]::Unicode for [Text.Encoding]::UTF8
Convert TO Base64:
PS> [Convert]::ToBase64String([Text.Encoding]::UTF8.GetBytes('Motörhead'))
TW90w7ZyaGVhZA==
Convert FROM Base64:
PS> [Text.Encoding]::Utf8.GetString([Convert]::FromBase64String('TW90w7ZyaGVhZA=='))
Motörhead
This page shows up when you google how to convert to base64, so for completeness:
$b = [System.Text.Encoding]::UTF8.GetBytes("blahblah")
[System.Convert]::ToBase64String($b)
Base64 encoding converts three 8-bit bytes (0-255) into four 6-bit bytes (0-63 aka base64). Each of the four bytes indexes an ASCII string which represents the final output as four 8-bit ASCII characters. The indexed string is typically 'A-Za-z0-9+/' with '=' used as padding. This is why encoded data is 4/3 longer.
Base64 decoding is the inverse process. And as one would expect, the decoded data is 3/4 as long.
While base64 encoding can encode plain text, its real benefit is encoding non-printable characters which may be interpreted by transmitting systems as control characters.
I suggest the original poster render $z as bytes with each bit having meaning to the application. Rendering non-printable characters as text typically invokes Unicode which produces glyphs based on your system's localization.
Base64decode("the answer to life the universe and everything") = 00101010
If anyone would like to do it with a pipe in Powershell (like a filter) (e.g. read file contents and decode it), it can be achieved with a one-liner like that:
Get-Content base64.txt | %{[Text.Encoding]::UTF8.GetString([Convert]::FromBase64String($_))}
I had issues with spaces showing in between my output and there was no answer online at all to fix this issue. I literally spend many hours trying to find a solution and found one from playing around with the code to the point that I almost did not even know what I typed in at the time that I got it to work. Here is my fix for the issue: [System.Text.Encoding]::UTF8.GetString(([System.Convert]::FromBase64String($base64string)|?{$_}))
Still not a "built-in", but published to gallery, authored by MS:
https://github.com/powershell/textutility
TextUtility
ConvertFrom-Base64
Return a string decoded from base64.
ConvertTo-Base64
Return a base64 encoded representation of a string.
This is a part of my data.
ªU€ÿ ÿ dô # #›ÿÿ;< …æ ³ 3m ...
It is saved in a file. When I look at it with a hex-editor I can see the hex-values. How can I read this "hex-data" with matlab?
EDIT: I get this error:
??? Error using ==> hex2dec at 38
Input string found with characters other than 0-9, a-f, or A-F.
with this code:
a = fread(fid,1,'uint32','l');
fprintf('%X',a)
b = hex2dec(a);
hex2dec() expects a hexadecimal number string as input.
>> hex2dec('28')
With your fread statement I suspect that your 'a' variable will be an integer*4 hence the error message, my understanding being that the precision has already converted the hex string to the type you've declared. If you want to pass this value through hex2dec then you'll need to create a string input.
>> hex2dec(num2str(28));
Do you know the format of your binary file? i.e. is the first value of the data an integer*4?
EDIT: added hex output
In response to the comment, as you read the data in, MATLAB is converting the binary data stream into the format you defined. If you want to get the stream of hexadecimal data then the simpliest way is to convert them back into hexadecimal.
a=dec2hex(fread(fid))
'a' will be a list of all the values in hexadecimal format and should match what you see in your hex editor.
q=dec2bin(hex2dec(num2str(p)))
I am trying to send an email with Chinese characters in the subject line from my program to a gmail account, but the subject line appears as ????. This is how the subject line is encoded:
=?utf-8?B?Rlc6IOiri+W5q+aIkee1piDoiIfkvaDotbfkvobnmoTlkIzkuos=?=
Is there anything wrong in the encoding? Is there anything that I have to bear in mind? The mail also contains Chinese characters in the body, but those get displayed just fine. I am using base64 to encode the body.
=?utf-8?B?Rlc6IOiri+W5q+aIkee1piDoiIfkvaDotbfkvobnmoTlkIzkuos=?= is encoded by base64, and the string-buffer(after decoded by base64) is encoded by utf-8.
You can decode it in python:
>>> from base64 import b64decode
>>> b64decode(b'Rlc6IOiri+W5q+aIkee1piDoiIfkvaDotbfkvobnmoTlkIzkuos=').decode('utf-8')
'FW: 請幫我給 與你起來的同事'
Also in python:
>>> from email.header import decode_header
>>> decode_header('=?utf-8?B?Rlc6IOiri+W5q+aIkee1piDoiIfkvaDotbfkvobnmoTlkIzkuos=?=')
[(b'FW: \xe8\xab\x8b\xe5\xb9\xab\xe6\x88\x91\xe7\xb5\xa6 \xe8\x88\x87\xe4\xbd\xa0\xe8\xb5\xb7\xe4\xbe\x86\xe7\x9a\x84\xe5\x90\x8c\xe4\xba\x8b', 'utf-8')]
>>> _[0][0].decode(_[0][1])
'FW: 請幫我給 與你起來的同事'
Or in bash(maybe you should pipe to iconv):
~ $ echo Rlc6IOiri+W5q+aIkee1piDoiIfkvaDotbfkvobnmoTlkIzkuos= | base64 -d
FW: 請幫我給 與你起來的同事
For those interested in the answer to this question, this string is a MIME header encoded as per RFC2047.
=?utf-8?B?Rlc6IOiri+W5q+aIkee1piDoiIfkvaDotbfkvobnmoTlkIzkuos=?= means it uses the UTF-8 charset, B means Base 64 encoding.
In PHP, use iconv_mime_decode.