These days I was trying to compile Swift 3.0 on macOS followed by the instruction which is on GitHub step by step, when I run utils/build-script -x shell, got a failue like this:
** BUILD FAILED **
The following build commands failed:
PhaseScriptExecution CMake\ Rules /Users/knight/githubRepo/swift-source/build/Xcode-DebugAssert/swift-macosx-x86_64/stdlib/public/core/Swift.build/Debug/add_custom_command_target-004471a8febeaad1237722247e0e4ace-Swift.o.build/Script-627C6DA99FFD4D7E8932585C.sh
(1 failure)
utils/build-script: fatal error: command terminated with a non-zero exit status 65, aborting
command line result
Does anybody met this problem before? Would you please show me your resolution?
deploytool works well until creating exe file using mbuild then get this error:
Executing command: mbuild -O -v -output "U1" -I"e:\Mat2009\work\ntst1\U1\src" "e:\Mat2009\work\ntst1\U1\src\U1_main.c" "e:\Mat2009\work\ntst1\U1\src\U1_delay_load.c" "e:\Mat2009\work\ntst1\U1\src\U1_mcc_component_data.c" -link exe -env MCR_DELAYLOAD=/delayload:mclmcrrt710.dll -env
MCR_DELAYLIB=delayimp.lib -outdir "e:\Mat2009\work\ntst1\U1\src"
Error: An error occurred while shelling out to mbuild (error code = -1).
Unable to build executable.
??? Error using ==> mcc
Error executing mcc, return status = 1 (0x1).
How can I resolve this error?
This error looks similar to an error I encountered once (after upgrading to 2012b), I cannot recall the source but I found two potential solutions:
Make sure there are no spaces in the path to the compiler
Try building a few times and cross your fingers
Given the time frame I had I chose to go for option two and after 5-10 attempts it suprisingly worked.
have found that COMSPEC env. var had a wrong value, so I deleted the wrong path, restarted MATLAB then it worked well.
Can anybody advise on the below error message. Never came across such an error message before with xcode.
Command /Applications/Xcode.app/Contents/Developer/usr/bin/ibtool failed with exit code 1
I am getting this error when making iPad build for device.
"Command /usr/bin/codesign failed with exit code 1"
I searched my blogs and forums and followed steps but no success. Now I deleted all certificate and provisioning profile from keychain and reinstall the latest one but still the same issue. Previously I was using my iOS a/c and now i am using my second iOS A/c certificate. Although when i install the new certificate on another system, it works fine but on my system creating the problem
Please help..
More detail about error...
CodeSign build/Debug-iphoneos/base.app
cd /Users/xx/iPad_work/2011/October/my_test/base
setenv PATH "/Developer/ios_sdk_4.2.1/Platforms/iPhoneOS.platform/Developer/usr/bin:/Developer/ios_sdk_4.2.1/usr/bin:/usr/bin:/bin:/usr/sbin:/sbin"
setenv _CODESIGN_ALLOCATE_ /Developer/ios_sdk_4.2.1/Platforms/iPhoneOS.platform/Developer/usr/bin/codesign_allocate
/usr/bin/codesign -f -s "iPhone Developer: Six sigma (xxxxxxxx)" --resource-rules=/Users/xx/iPad_work/2011/October/my_test/base/build/Debug-iphoneos/base.app/ResourceRules.plist --entitlements /Users/xx/iPad_work/2011/October/my_test/base/build/base.build/Debug-iphoneos/base.build/base.xcent /Users/xx/iPad_work/2011/October/my_test/base/build/Debug-iphoneos/base.app
/Users/xx/iPad_work/2011/October/my_test/base/build/Debug-iphoneos/base.app: object file format invalid or unsuitable
Command /usr/bin/codesign failed with exit code 1
Thanks
I am running XCode 4.2 and when I Build, Archive, and then attempt to create the IPA file in Organizer, I get the following error message:
PackageApplication failed with exit code 1.
Packaging application: '/Users/Brad/Library/Developer/Xcode/Archives/2011-08-06/*** 8-6-11 4.21 PM.xcarchive/Products/Applications/***.app'
Arguments: embed=/Users/Brad/Library/MobileDevice/Provisioning Profiles/***.mobileprovision verbose=1 output=/var/folders/-K/-K95TJ0AGgaHq4MSn8EjL++++TI/-Tmp-/1376A091-5CA1-4393-AF29-34FFBFD49C74-1082-00000C64DB251DF1/app.ipa sign=iPhone Distribution: ***.
Environment variables:
HOME = /Users/Brad
LOGNAME = Brad
__CF_USER_TEXT_ENCODING = 0x1F5:0:0
DISPLAY = /tmp/launch-r5c1Ou/org.x:0
COMMAND_MODE = unix2003
VERSIONER_PERL_PREFER_32_BIT = no
PATH = /Developer/usr/bin:/usr/bin:/bin:/usr/sbin:/sbin
SHELL = /bin/bash
SSH_AUTH_SOCK = /tmp/launch-SjRZET/Listeners
Apple_PubSub_Socket_Render = /tmp/launch-4KUyaU/Render
TMPDIR = /var/folders/-K/-K95TJ0AGgaHq4MSn8EjL++++TI/-Tmp-/
USER = Brad
VERSIONER_PERL_VERSION = 5.10.0
Output directory: '/var/folders/-K/-K95TJ0AGgaHq4MSn8EjL++++TI/-Tmp-/1376A091-5CA1-4393-AF29-34FFBFD49C74-1082-00000C64DB251DF1/app.ipa'
Temporary Directory: '/var/folders/-K/-K95TJ0AGgaHq4MSn8EjL++++TI/-Tmp-/kNwZk2Uc3U' (will NOT be deleted on exit when verbose set)
+ /bin/cp -Rp /Users/Brad/Library/Developer/Xcode/Archives/2011-08-06/*** 8-6-11 4.21 PM.xcarchive/Products/Applications/***.app /var/folders/-K/-K95TJ0AGgaHq4MSn8EjL++++TI/-Tmp-/kNwZk2Uc3U/Payload
Program /bin/cp returned 0 : []
### Checking original app
+ /usr/bin/codesign --verify -vvvv /Users/Brad/Library/Developer/Xcode/Archives/2011-08-06/*** 8-6-11 4.21 PM.xcarchive/Products/Applications/***.app
Program /usr/bin/codesign returned 0 : [/Users/Brad/Library/Developer/Xcode/Archives/2011-08-06/*** 8-6-11 4.21 PM.xcarchive/Products/Applications/***.app: valid on disk
/Users/Brad/Library/Developer/Xcode/Archives/2011-08-06/*** 8-6-11 4.21 PM.xcarchive/Products/Applications/***.app: satisfies its Designated Requirement
]
Done checking the original app
### Embedding '/Users/Brad/Library/MobileDevice/Provisioning Profiles/***.mobileprovision'
+ /bin/rm -rf /var/folders/-K/-K95TJ0AGgaHq4MSn8EjL++++TI/-Tmp-/kNwZk2Uc3U/Payload/***.app/embedded.mobileprovision
Program /bin/rm returned 0 : []
+ /bin/cp -rp /Users/Brad/Library/MobileDevice/Provisioning Profiles/***.mobileprovision /var/folders/-K/-K95TJ0AGgaHq4MSn8EjL++++TI/-Tmp-/kNwZk2Uc3U/Payload/***.app/embedded.mobileprovision
Program /bin/cp returned 0 : []
+ /usr/bin/codesign -d --entitlements /var/folders/-K/-K95TJ0AGgaHq4MSn8EjL++++TI/-Tmp-/kNwZk2Uc3U/entitlements_rawunFQiwaj /var/folders/-K/-K95TJ0AGgaHq4MSn8EjL++++TI/-Tmp-/kNwZk2Uc3U/Payload/***.app
Program /usr/bin/codesign returned 0 : [Executable=/var/folders/-K/-K95TJ0AGgaHq4MSn8EjL++++TI/-Tmp-/kNwZk2Uc3U/Payload/***.app/***
]
+ /usr/libexec/PlistBuddy -c Set :get-task-allow NO /var/folders/-K/-K95TJ0AGgaHq4MSn8EjL++++TI/-Tmp-/kNwZk2Uc3U/entitlements_plistNowUyBmz
Program /usr/libexec/PlistBuddy returned 0 : []
+ /usr/bin/plutil -lint /var/folders/-K/-K95TJ0AGgaHq4MSn8EjL++++TI/-Tmp-/kNwZk2Uc3U/entitlements_plistNowUyBmz
Program /usr/bin/plutil returned 0 : [/var/folders/-K/-K95TJ0AGgaHq4MSn8EjL++++TI/-Tmp-/kNwZk2Uc3U/entitlements_plistNowUyBmz: OK
]
### Codesigning '/Users/Brad/Library/MobileDevice/Provisioning Profiles/***.mobileprovision' with 'iPhone Distribution: ***.'
+ /usr/bin/codesign --force --preserve-metadata --sign iPhone Distribution: ***. --resource-rules=/var/folders/-K/-K95TJ0AGgaHq4MSn8EjL++++TI/-Tmp-/kNwZk2Uc3U/Payload/***.app/ResourceRules.plist --entitlements /var/folders/-K/-K95TJ0AGgaHq4MSn8EjL++++TI/-Tmp-/kNwZk2Uc3U/entitlements_plistNowUyBmz /var/folders/-K/-K95TJ0AGgaHq4MSn8EjL++++TI/-Tmp-/kNwZk2Uc3U/Payload/***.app
Program /usr/bin/codesign returned 1 : [/var/folders/-K/-K95TJ0AGgaHq4MSn8EjL++++TI/-Tmp-/kNwZk2Uc3U/Payload/***.app: replacing existing signature
codesign_allocate: object: /var/folders/-K/-K95TJ0AGgaHq4MSn8EjL++++TI/-Tmp-/kNwZk2Uc3U/Payload/***.app/*** malformed object (unknown load command 8)
/var/folders/-K/-K95TJ0AGgaHq4MSn8EjL++++TI/-Tmp-/kNwZk2Uc3U/Payload/***.app: object file format invalid or unsuitable
]
error: codesign failed with error 1
Note: I replaced any names with *.
There is no single answer to this problem, partly because Apple's error message(s) is/are not terribly specific.
For my case the solution was this:
Open this Perl script:
/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/PackageApplication
and insert this line near the top, like right after the "my $xxxx" declarations:
$ENV{CODESIGN_ALLOCATE} = '/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/codesign_allocate';
Credit to http://loopingrecursion.com/index.php?t=codesign for this answer.
The problem seemed to arise after installing some XCode 4.2 beta 7. I eventually uninstalled that one and reinstalled 4.1 from scratch but still couldn't Validate or Share, until I employed this fix.
Ran into this myself a few minutes ago.
Make sure you have a Distribution Certificate in your keychain (you can create one in your Provisioning Portal), and also a Distribution Profile (also you can create this in you Provisioning Portal).
After that, go into your Project properties, to the 'Build Settings' tab.
You'll find a section called 'Code Signing', and at the 'Code Signing Identity' part, at 'Release' you select 'iPhone Distribution'.
That was how i fixed it,
Good luck!
EDIT: just saw you're in the Enterprise program, i'm not sure if my solution works for Enterprise..
The "PackageApplication failed with exit code 1." error during archiving can also be caused by a missing resource. Check your error message for which resource it can't find.
Just to put my 5 cents on this. I had the same error and it turned out that I had 2 Distribution certificates in my keychain. One of them appeared with a red X next to it. After deleting it the error was resolved.