[locationManager StarUpdatingLocation]
doesnt work in my case. I have an NSOBject class in which i have a method like this.
(void)findlocation
{
locationManager = [[CLLocationManager alloc] init] ;
locationManager.delegate = self;
locationManager.distanceFilter = kCLDistanceFilterNone;
locationManager.desiredAccuracy = kCLLocationAccuracyHundredMeters;
[locationManager startUpdatingLocation];
}
Then I have the delegate methods
(void)locationManager:(CLLocationManager *)manager didUpdateToLocation:(CLLocation *)newLocation fromLocation:(CLLocation *)oldLocation
However using an NSLog statement i figured that the startupdating location method doesnt go into this locationmanager method. :( I am calling the current location method in another method in the same class so i would be saying [self currentLocation]. Any help would be appreciated. thank you.
Conform to protocol CLLocationManagerDelegate in your Class where you have this code.
If this is the case, then you should see whether or not this code is working fine in Device. I think you are running this in simulator & the CLLocationManagerDelegate is not fired & getting upset on code.
If you are using simulator then by default the location of Simulator is set to None.
Kindly check.
Click on Simulator
Check the Debug menu on top of desktop.
Go to Location Submenu
Check for the selected option. If it is none, then choose a custom location. Add values in latitude & longitude. (ex: 13.0524139 , 80.2480755)
If this works then you are good to go in simulator as well.
hope that helps.
Related
I have developed both iPhone & iPad application which supports for iOS 5 and iOS 6
in that application i have grabbed user current location using CLLocationManager.
when i want to stop updating receiving GPS coordinates. I have called stopUpdatingLocation
method to stop calling didUpdateToLocation method. It was woking completely fine with iOS 5 and 6 But unfortunately its not working with iOS 7.
Seems that stopUpdatingLocation method is not working .Any particular reason. ??
i had a keep a variable to monitor the life cycle of didUpdateToLocation method and stop executes it.
One thing might be possible is,
Your current location blue dot moving on your map is because you set the MKMapView's showsUserLocation to YES. It will track until you set it to NO.
Second thing,
You might be setting below thing to stop calling that method
locationManager = nil;
That does not stop monitoring, but what it does, not to refer the location manager, So now its not possible to stop monitoring.
Instead add below code & then see what happen
[locationManager stopUpdatingLocation];
locationManager=nil;
Hope it helps..
#tdevoy - Here is sample
- (void)locationManager:(CLLocationManager *)manager didUpdateLocations:(NSArray *)locations
{
CLLocation *location = [locations lastObject];
latitude = location.coordinate.latitude;
longtitude = location.coordinate.longitude;
//stops updating current user location update
[locationManager stopUpdatingLocation];
}
I am using iphone simulator 4.2 and try to display or NSLog Heading and other Location services attributes e.g. Latitude, Longitude, altitude, horizontalAccuracy, VerticalAccuracy, speed. but its not showing the correct parameters and Incase of Heading its actually not firing the event.
as its execute CLLocation code
- (void)locationManager:(CLLocationManager *)manager
didUpdateToLocation:(CLLocation *)newLocation
fromLocation:(CLLocation *)oldLocation
{
[self.delegate locationUpdate:newLocation];
}
and not executing CLHeading code
- (void)locationManager:(CLLocationManager *)manager didUpdateHeading:(CLHeading *)newHeading
{
[self.delegate headingUpdate:newHeading];
}
and when I put breakpoint on these both codes it never touch CLHeading code. I am updating location and heading in init.
- (id) init{
if (self!=nil) {
self.locationManager = [[[CLLocationManager alloc] init] autorelease];
self.locationManager.delegate = self;
self.locationManager.desiredAccuracy = kCLLocationAccuracyBest;
self.locationManager.distanceFilter = kCLDistanceFilterNone;
[self.locationManager startUpdatingLocation];
[self.locationManager startUpdatingHeading];
}
return self;
}
The problem is that I do not know that is due to simulator or there is any problem in code?
please help.
CLLocationManager needs additional hardware and hence wont work on simulator. However you can test that using the method described in this other SO question.
From the documentation:
Some location services require the presence of specific hardware on the given device. For example, heading information is available only for devices that contain a hardware compass. This class defines several methods that you can use to determine which services are currently available.
This answer can be updated for anyone using Xcode 4.2. It is still in beta status, but if you are a paid developer you will have access to it. Also, if you are a paid developer, there are some good videos from WWDC 2011 that explain how to use the simulator for location simulation.
WWDC 2011
See What's New in Core Location and Testing Your Location-Aware App Without Leaving Your Chair
**Note: Please note again that only paid developers have access to these videos
It looks like the behaviour is by default
It fires Location but not heading.
I have not tested my application in actual hard ware to confirm my though...
Anthony Desa
I am trying to develop the setupcontroller for map it like setting page where user can choose at what time or at rich the some distance user then see his current location automatically.
I try this:
CLLocationManager *locationManager = [[CLLocationManager alloc]init];
locationManager.delegate = self;
locationManager.desiredAccuracy = kCLLocationAccuracyNearestTenMeters;
[locationManager startUpdatingLocation];
but it work one one time. I give user option at time or what distance he need just set and when he rich at that position. Then app show him the current location ON MAPView NOT on UIlable Or in table view. Can anyone help me out?
Are you calling
[locationManager stopUpdatingLocation];
in your delegate?
Is your
didFailWithError:
method called?
I'm not getting any location callbacks on either sim or device. I've got this code being called:
- (void)startLocationCallbacks: (NSObject*) ignore
{
locationManager.delegate = self;
locationManager.desiredAccuracy = kCLLocationAccuracyBestForNavigation;
locationManager.distanceFilter = MINIMUM_METERS;
[locationManager startUpdatingLocation];
NSLog(#"[DEBUG] [locationManager startUpdatingLocation] (%#, %#)", locationManager, locationManager.delegate);
}
and log statements at the top of both
- (void)locationManager:(CLLocationManager *)manager didFailWithError:(NSError *)error
and
- (void)locationManager:(CLLocationManager *)manager didUpdateToLocation:(CLLocation *)newLocation fromLocation:(CLLocation *)oldLocation
but neither log statement ever gets called. Location Notifications are enabled for my app (as shown in Settings, plus I said "allow.")
What are some possible reasons that I'm not getting location updates?
Config/other info:
I have allocated locationManager, and saved it in a retain property.
I have called startUpdatingLocation
I'm using 4.1 SDK
Problem is on both Sim & iPod-touch (2nd Gen) & iPhone-3, all running 4.1
Location notifications are allowed in my app (both as indicated in Settings and because I clicked "allow" in the alert.)
I've used CLLocationManager successfully before (in many shipping apps!) This is a real hair-puller for me.
Thanks!
Whew! Ok, I found it.
It turns out that one of the ways to make a CLLocationManager not fire off location callbacks is to do all the set-up in not-the-main-thread. When I moved my setup routine to a performSelectorOnMainThread, all worked exactly as expected.
What a nightmare!
Hope this answer helps others...
Edit/clarification:
Originally, I had something like this:
- (BOOL) appDidFinishLaunchingWithOptions: (NSDictionary*) options
{
// ...[app setup, snip]
[NSThread detachNewThreadSelector: #selector(postLaunchSetupThread) toTarget: self withObject: nil];
}
- (void)postLaunchSetupThread
{
NSAutoreleasePool *pool = [NSAutoreleasePool new];
// ...[other setup, snip]
[self setupLocationManager];
[pool release];
}
- (void)setupLocationManager
{
self.myLocationManager = [[[CLLocationManager alloc] init] autorelease];
[myLocationManager startLocationUpdates];
}
But calling setupLocationManager in a thread prevented the callbacks. So my fix was to move the line
[self setupLocationManager];
out of the thread and back into appDidFinishLaunchingWithOptions
Actually you can run it from another thread as well.
From Apple documentation:
Configuration of your location manager object must always occur on a
thread with an active run loop, such as your application’s main
thread.
Just make sure your run loop is running on that thread, and the CLLocationManager events are dispatched.
More about run loop:
https://developer.apple.com/library/mac/#documentation/Cocoa/Conceptual/Multithreading/RunLoopManagement/RunLoopManagement.html
For iOS 8
1) I placed these lines right after I init'd the location manager.
if([self.locationManager respondsToSelector:#selector(requestAlwaysAuthorization)]) {
[self.locationManager requestAlwaysAuthorization];
}
2) I added NSLocationAlwaysUsageDescription to the plist and set it to a string and added a message.
3) In my target, I clicked on Capabilities tab, and then turned on Background Modes and checked "Location Updates" and "Uses Bluetooth LE accessories"
This worked for me
// check out this
//...CLLocationManager does n't call delegate method properly
//...after lot of R&D I'm using a watchdog method it calls "
https://stackoverflow.com/questions/7156920/didupdatetolocation-doesnt-gets-called-immediately/14605889#14605889
In my case it was because of my device was unable to determine location - while staying indoors GPS signal was unavailable and wi-fi was also disconnected so location manager just wasn't able to receive any location data and delegate was never called.
Once I've connected wi-fi it worked (I guess moving outdoors should also do the trick in that case, but sometimes it is not very convenient way :) )
I have a table view with a list of hotel, and i want put in cell.detailTextLabel.text the distance beetween userlocation and hotel. How can obtain the coordinates of userlocation?
I see on web that i need to use CLLocationManager but i don't understand how and where implement in my table view.
Then,to get the distance,i do a "getDistancefrom" between userLocation and the coordinates of the hotel ?
Thanks
That's really quite a big question ;)
This tutorial looks pretty good - I'd go through it and see if it helps. If not, come back to stackoverflow and ask more questions.
Well you have the right approach in mind, just need to clear out the details.
The simplest way is to have your table view controller adhere to the CLLocationManagerDelegate protocol. You then setup a location manager and have it start updating the user's location:
locationManager = [[CLLocationManager alloc] init];
locationManager.delegate = self;
[locationManager startUpdatingLocation];
Then you just implement this method from the delegate:
- (void)locationManager:(CLLocationManager *)manager didUpdateToLocation:(CLLocation *)newLocation fromLocation:(CLLocation *)oldLocation
In there you will be notified whenever a user's location changes. So then you can grab the newLocation longitude and latitude and compute the distance using all your hotels' longitudes and latitudes.
Make sure you import the core location framework to your project as I don't think it's there by default.
Good luck.