I am working with Intellij but some of my co-workers don't. When I was writing install doc, I realized that Tomcat is not managed the same way on the two IDEs.
Which is a problem considering what happened next when I tried to set up our project on Eclipse.
Basically, on Intellij, you select a Tomcat on your computer and it will literally copy the war into the webapps folder and run the server with everything working fine.
I am not a user of Eclipse so I might have misunderstood something, but I found that when you create a Tomcat server, it will embed the one you gave it to it. Doing that is a bit of an issue when you are working with logback, because usually you set your logs location directly into the Tomcat folder. And in Eclipse you are working out of this folder.
So, I can't run my application because it can't find the location of the logs folder at the fine place.
Is there a way to use Tomcat in Eclipse like Intellij? Or did I just miss something because I am kind of new with Eclipse?
See the FAQ: (1) (2)
I found that when you create a Tomcat server, it will embed the one you gave it to it.
You have to be more specific with your description. How you do things and what do you see. What do you mean by "embed"? What is the actual failure that you are observing with your logging?
There are different ways to do things.
For me by default Eclipse does not embed Tomcat, but runs it as a proper java process. (org.apache.catalina.startup.Bootstrap) You should be able to see it with jconsole and similar tools.
It runs your web application expanded, i.e. without zipping it into a war file. It creates a separate configuration of Tomcat, i.e. runs it with separate CATALINA_HOME and CATALINA_BASE directories (as documented in RUNNING.txt file of Apache Tomcat). The CATALINA_HOME directory stays untouched and CATALINA_BASE directory is ${workspace}/.metadata/.plugins/org.eclipse.wst.server.core/tmp0 etc. A logs directory can be found there.
One known caveat is that java.util.logging is not configured by default (the system properties java.util.logging.manager and others are not set). See "How do I enable the JULI logging" item in the FAQ. -- In the same way you will set any other system properties that you may need.
The default configuration of java.util.logging (as provided by JRE) is to log everything to the console, without creating any files.
I am using Eclipse 4.2 and JBoss 7.
I have Build automatically checked in Eclipse.
Even then I have to build and redeploy the EAR file to JBOSS to test any code changes I make in Eclipse debug mode.
Am I missing something here?
THanks,
What the "Build automatically" option in eclipse do is that when you modify the source code of a class, this one will be automatically compiled, which doesn't mean that all the whole project that contains the class (i.e. war, jar, ear ...) is redeployed in the server. But of course it helps in the speed of deployment, because the classes you've been modifying are already compiled when you manually build or deploy the project.
On the other hand, to avoid problems with redeployments, you'd better set up JBoss to delete the files related to the application keeps in the work directory, when the application is undeployed / redeployed. Look at this stackoverflow thread for more information.
Concerning the "Build automatically" option:
In order for the Deployment Scanner in JBoss to work, you have to have it turned on in JBoss.
Also, you need to add your project to the JBoss server in the Servers window. Look for the "Add or Remove..." option.
Once your project is added, any changes you make to your code will get detected and your module will be redeployed automatically in the background. Failing that and assuming your project doesn't have a snag, you can use mvn install & mvn jboss-as:deploy to manual update your module.
Beware, sometimes mvn doesn't pick up the latest java code. This seems to be a project configuration issue more than anything. Re-creating the project seems to correct the issue.
Also, keep an eye out for duplicate persistence.xml files.
You only need one.
I'm using GWT 2.4 and have a ton of code already written. I understand the Jetty server that comes with the GWT plugin has very tight control over the jars that can be used in a project to mimic app engine as closely as possible. I need to deploy to tomcat 7. I modified my project in eclipse and "blessed" it as a dynamic web project so I can export...WAR and upload it to my QA and production tomcat.
I need help with getting the app to run (and debug) on an embedded tomcat (like an honest dynamic web project would). I already have tomcat setup in eclipse and I have my CAS server web app deployed to it.
I've ready tons of either old or confusing posts here and elsewhere. Basically, I'm looking for the same debugging environment I would get with the packaged Jetty server, but on my own tomcat configured with WTP in eclipse...so I can mimic my production environment (just like Jetty mimics app engine)
any help is appreciated.
It should probably a little bit easier, but it's possible. Here's how I do it:
1. Setting up the web server
Using the JavaEE edition of Eclipse, I set up the Tomcat 7.0 server adapter, and define an environment in Preferences > Server > Runtime Environments
File > New > Project... > Web/Dynamic Web Project
Select the target runtime I set up in the first step
Important: In Context Root, enter /
I create an HTML file and a Servlet, and then try running the setup using Debug As > Debug On Server
2. Adding the GWT code server
Project > Properties > Google > Web Toolkit > Use Google Web Toolkit
Important: I always need to change the order in the Java Build Path (Project > Properties > Java Build Path > Order and Export), see http://code.google.com/p/google-web-toolkit/issues/detail?id=4479 - gwt-dev.jar must be pretty much on top of the path.
Project > Properties > Google > Web Application: War directory = "WebContent", also check "Launch and deploy from this directory"
I create some sample GWT content (I create a sample GWT project, and copy most of it over)
I try to GWT compile the project. This shows me, if I got the build path order right - otherwise, the compiler fails early with "java.lang.NoSuchFieldError: warningThreshold".
Debug As > Web Application - just to create a debug configuration. Stop the debug. Edit the debug configuration (Run > Debug Configurations...), deselect "Run built-in server". Start the debug again.
Now, finally, I can debug both the server and the client part (I still need to click two Debug icons to start both!) I can manage the client side from the "Development Mode" view, and the server side from the "Servers" view. At the end of the day, it works great, and using the "Automatically publish when resources change" feature (Servers view > myServerName > Open > Publishing), sometimes even better than with the integrated Jetty.
At first thought, I don't really see why you would be facing a problem. Perhaps, the way Eclipse is laid out is too confusing and daunting.
On my Eclipse, I had been using the default jetty as the server during GWT debug. However, there were some problems which would not be caught by jetty when deployed on Tomcat or JBoss.
And when I added Tomcat or JBoss instances to Eclipse and added my app to those server instances, the debugging worked straight away. Are you missing one piece of vital, but simple info?
Let me presume that the following would fill in your missing link ...
Locating/adding your server instance:
On Package Explorer (or Project Explorer, either one) in Eclipse, you would see, besides your personal projects, a "servers" project. Under it is are configuration nodes listing all your Tomcat instances.
If you cannot see the "servers" node in Package Explorer, it probably is due to your working set filter. (And if you don't know what working sets are ... I guess you would need to beef up on your dexterity in Eclipse).
If you don't already have a Tomcat instance, you simply right click on the "servers" project to add a new server (Package Explorer -> New -> Server ...). You would be asked the location of your Tomcat home. And your desired port number of the server instance. Of course, you would have to ensure that the port number will not clash with the port used by any other inet operation on your box.
Configuring the port number a 2nd time
On the server instance node in Package Explorer, you would find the file you should edit to set the port number to match the one you specified when creating the new Tomcat instance. If you don't know which file to edit, you would need to read up on the Tomcat version you created to find out which file contains the port number config.
You need to config the port a 2nd time because the 1st time tells Eclipse where and at what port to expect the server instance to be running. The 2nd time is to configure the server instance itself.
Adding your app to the server
However, the nodes in "servers" project only allow you to configure your Tomcat instances. There is yet another view called the "server view" to further configure your tomcat instance. You need to enable Server view from Window->Show View->Server->Servers.
Right click on the server instance in the "Server View" to add your app.
Running debug off the Maven generated target.
There are times you wish to debug the war structure to figure out which jars are missing in the war. And incrementally remove jars from your war to figure out the jars that are already supplied by the server. Since JBoss supplies many of the jars already, you would have to figure out if your development jars are of the versions as those expected by JBoss.
You would create another Eclipse project in your workspace and make an Eclipse folder softlink in your 2nd project to point to the Maven generated target of your first project. And you specify target/{maven generated webapp directory} as the webapp directory of your 2nd project. What I mean by "maven generated webapp directory" is the unzipped intermediate directory generated by Maven (used by Maven to generate the zipped war file).
This is the cleanest way to debug production war if you could faithfully replicate the production tomcat/jboss server on your Eclipse development box.
If you prefer JBoss.
Somehow, JBoss config node is not listed in the "Servers" node in Package/Project Explorers. You would need to go to your JBoss installation directory to edit them.
Remote debugging.
If you wanted to debug the app on your production box, or on a server sitting on another box, you would have to start that tomcat instance under debug. You should read up on that. You have to specify the debug port.
Then in Eclipse, at Run->Debug Configuration->Remote Java Application, you specify the app and the debug port.
The first time you debug, Eclipse "may not know" where the source files are, especially if your app has multiple project dependencies. (Why can't Eclipse search the source files from my list of projects?) Anyway, you have to specify where to find your source files. And then when your debugging traverses into another project dependency, you would have to over-write the location of the source files.
So, voila! That is how I got my debugging working. I advise you to avoid remote debugging as much as possible unless you need to diagnose production problems. Unless you are doing remote debugging, do not attempt to deploy the war to local server, but simply depend on associating the project to the server instance.
Eclipse is too confusing
I know Eclipse is too confusing and you have to wade thro its features. You just have to bear with it. Eclipse menus & views are apparently optimized for plugin-programmer-centric not user-centric.
For example, why would I go to "help" to install new software? I used to expect that "Help->Install new software" to be an instructional manual to installing new software.
It beats (and annoys me) that the Eclipse team did not combine the operations together so that I could add apps to a server instance at Package Explorer. Why not? As a user I would expect to see only a single entry point to configuring my servers.
To alleviate the confusion, I like encouraging people to download and install Springsource's version of Eclipse (STS). It's the same Eclipse, except that STS has the essential parts installed and has a dashboard pointing to compatibly installable plugins. Tomcat is preinstalled as VMware tc Server. And the views are correctly config'd to show the server instances. And the correct workable Eclipse-Maven bridging plugin is pre-installed.
I am developing a war/java website that is built via maven.
Currently, I have to make changes... tell maven to build them... then deploy to Tomcat. This is around 40seconds. So every change I make, I have to wait >=40seconds to see the change.
This is becoming very frustrating, so I have tried to speed up the deployment. I deployed the site via maven with war:exploded. Now, I edit the files live in 'deployed' format. The problem being I will need to move these changes back to the source location for pushing into our source control.
So has anyone written a script to 'undeploy' changes on the server carefully pointing them back to where maven expects them to be, or found another way I can instantly see my changes in a web browser. Rebuilding from source everytime is not a fun solution.
Currently, I have to make changes... tell maven to build them... then deploy to Tomcat. This is around 40seconds. So every change I make, I have to wait >=40seconds to see the change.
This is just a wrong way to use Maven in my opinion.
Either use something light like jetty:run (and hook Eclipse remote debugger to enable hotswap), see Configuring Jetty, Maven, and Eclipse together with Hot Swap.
Or use Eclipse WTP and deploy your project on a Tomcat server inside Eclipse (your project can be recognized as a Dynamic Web project whether you're using m2eclipse or the Maven Eclipse plugin).
Have you tried JavaRebel?
http://www.zeroturnaround.com/jrebel/
Use hot-deployment.
Just configure tomcat-maven-plugin and try tomcat:redeploy.
I am developing a Java EE application that I deploy over and over again on a local JBoss installation during development. I want to speed up the build by hot deploying my application straight into [JBOSS]/server/default/deploy/myApp
It seems to work - but there also seems to be a somewhat arbitrary delay between the hard deploy and when JBoss starts using the new classes. I am not very familiar with JBoss, but I assume it caches classes, and that this is what causes the problem.
Am I correct, and if so, how do I make JBoss flush it's cache?
I had the same problem in my bundle: (Eclipse IDE + JBoss server adapter) + JBoss AS 7.0.1 (community project).
My solution is very simple - you should go to JBoss administrative panel (by default localhost:9990), there in profile settings open Core - Deployment Scanners. Turn on Autodeploy-Exploded (set to true), and by your wishes you can set scanner time (by default 5000 ms) to appropriate for your (I set to 2000, for more fast incremental publish in Eclipse when I make changes to projects). That's it. Now JBoss makes HOT deploy not only for HTML (JSF, XHTML and so on) files, but also takes care of POJO classes (beans and so on) files.
Unfortunately, it's not that easy. There are more complicated things behind the scenes in JBoss (most of them ClassLoader related) that will prevent you from HOT-DEPLOYING your application.
For example, you are not going to be able to HOT-DEPLOY if some of your classes signatures change.
So far, using MyEclipse IDE (a paid distribution of Eclipse) is the only thing I found that does hot deploying quite successfully. Not 100% accuracy though. But certainly better than JBoss Tools, Netbeans or any other Eclipse based solution.
I've been looking for free tools to accomplish what you've just described by asking people in StackOverflow if you want to take a look.
You should try JRebel, which does the hot deploy stuff pretty well. A bit expensive, but worth the money. They have a trial version.
Just my two cents:
Cold deployment is the way of deploying an application when you stop it (or stop the whole server), then you install the new version, and finally restart the application (or start the whole server). It's suitable for official production deployments, but it would be horrible slow to do this during development. Forget about rapid development if you are doing this.
Auto deployment is the ability the server has to re-scan periodically for a new EAR/WAR and deploy it automagically behind the scenes for you, or for the IDE (Eclipse) to deploy automagically the whole application when you make changes to the source code. JBoss does this, but JBoss's marketing department call this misleadingly "hot deployment". An auto deployment is not as slow compared to a cold deployment, but is really slow compared to a hot deployment.
Hot deployment is the ability to deploy behind the scenes "as you type". No need to redeploy the whole application when you make changes. Hot deployment ONLY deploys the changes. You change a Java source code, and voila! it's running already. You never noticed it was deploying it. JBoss cannot do this, unless you buy for JRebel (or similar) but this is too much $$ for me (I'm cheap).
Now my "sales pitch" :D
What about using Tomcat during development? Comes with hot deployment all day long... for free. I do that all the time during development and then I deploy on WebSphere, JBoss, or Weblogic. Don't get me wrong, these three are great for production, but are really AWFUL for rapid-development on your local machine. Development productivity goes down the drain if you use these three all day long.
In my experience, I stopped using WebSphere, JBoss, and Weblogic for rapid development. I still have them installed in my local environment, though, but only for the occasional test I may need to run. I don't pay for JRebel all the while I get awesome development speed. Did I mention Tomcat is fully compatible with JBoss?
Tomcat is free and not only has auto-deployment, but also REAL hot deployment (Java code, JSP, JSF, XHTML) as you type in Eclipse (Yes, you read well). MYKong has a page (https://www.mkyong.com/eclipse/how-to-configure-hot-deploy-in-eclipse/) with details on how to set it up.
Did you like my sales pitch?
Cheers!
Hot deployment is stable only for changes on static parts of the application (jsf, xhtml, etc.).
Here is a working solution, according to JBoss AS 7.1.1.Final:
Build your project.Navigate to [JBOSS_HOME]/standalone/tmp/vfs.Open the most recently modified folder named "deployment[some_alphanumeric_values]", i.e. "deployment344b1c870c8edbd".Navigate to the specific view that you want to edit (usually, this is included into the packaged .war folder) and open it with a text editor (i.e. Notepad++).Make the changes you want and save the file.Refresh the respective page on your browser. The changes should be visible now.
When finished, don't forget to copy these changes to your actual development environment, rebuild and redeploy.
This worked for me in Eclipse Mars with WildFly 11. Double-click on WildFly server under Servers to open the configuration page. In the Overview tab -> Publishing, choose "Automatically publish when resources change" and set the interval to 1. Next, Overview tab -> Application Reload Behavior, uncheck the use default pattern and set the pattern to \.jar$|\.class$. In the Deployment tab, uncheck Deploy project as compressed archives. Hope this helps.
I have had the same problem, but think I've got it under control now.
Are you using eclipse or command line or ??
When I use the command line, I think I did "seam clean" or "seam undeploy" or maybe even "seam restart" followed by "seam explode". I probably tried all of these at one time or another never bothering to look up what each one does.
The idea is to remove the deployed war file from TWO places
1. $JBOSS_HOME/server/default/deploy
2. $PROJECT_HOME/exploded_archives
I'm pretty sure "seam undeploy" removes the 1st and "seam clean" removes the 2nd.
When I use eclipse (I use the free one), I first turn off "Project/Build Automatically"
Then when I am ready to deploy I do either Project/Build Project or Project/Build All depending on what I've changed. When I change xhtml, Build Project is sufficient. When I change java source Build All works. It's possible these do the same things and the difference is in my imagination, but some combination of this stuff will work for you.
You have to watch the output though. Occasionally the app does not get cleaned or undeployed. This would result in not seeing your change. Sometimes I shut down the server first and then rebuild/clean/deploy the project.
Hope this helps.
TDR
Found the solution on this link:
What to do:
configure exploded war artifact to have extension .war
deploy exploded artifact to WildFly or Jboss
configure IntelliJ to Update Resources on Update Action
When I modify a page (web), I update and when I refresh web browser: is all there with my mod.
I did configured Jboss for autoscanning (not sure it did helped)
I am using JBoss AS 7.1.1.Final. Adding following code snippet in my web.xml helped me to change jsp files on the fly :
<servlet>
<servlet-name>jsp</servlet-name>
<servlet-class>org.apache.jasper.servlet.JspServlet</servlet-class>
<init-param>
<param-name>development</param-name>
<param-value>true</param-value>
</init-param>
<load-on-startup>3</load-on-startup>
</servlet>
Hope this helps.!!
Actually my problem was that the command line mvn utility wouldn't see the changes for some reason. I turned on the Auto-deploy in the Deployment Scanner and there was still no difference. HOWEVER... I was twiddling around with the Eclipse environment and because I had added a JBoss server for it's Servers window I discovered I had the ability to "Add or Remove..." modules in my workspace. Once the project was added whenever I made a change to code the code change was detected by the Deployment Scanner and JBoss went thru the cycle of updating code!!! Works like a charm.
Here are the steps necessary to set this up;
First if you haven't done so add your JBoss Server to your Eclipse using File->New->Other->Server then go thru the motions of adding your JBoss AS 7 server. Being sure to locate the directory that you are using.
Once added, look down near the bottom of Eclipse to the "Servers" tab. You should see your JBoss server. Highlight it and look for "Add or Remove...". From there you should see your project.
Once added, make a small change to your code and watch JBoss go to town hot deploying for you.
I've been developing a project with Eclipse and Wildfly and the exploded EAR file was getting big due to deploying of all the 3rd party libraries I needed in the application. I was pointing the deployment to my Maven repository which I guess was recopying the jars each time. So redeploying the application when ever I changed Java code in the service layer was turning into a nightmare.
Then having turned to Hotswap agent this helped a lot as far as seeing changes to EJB code without redeploying the application.
However I have recently upgraded to Wildfly 10, Java 8 and JBoss Developer Studio 10 and during that process I took the time to move all my 3rd party application jars e.g. primefaces into Wildfly modules and I removed my Maven repo from my deployment config. Now redeploying the entire application which is a pretty big one via Eclipse takes just a few seconds and it is much much faster than before. I don't even feel the need to install Hotswap and don't want to risk it anyway right now.
So if you are building under Eclipse with Wildfly then keep you application clear of 3rd party libs using Wildfly Modules and you'll be much better off.
Solution for Netbeans 8.02 and 8.1 IDE and JBOSS EAP 6.4:
From the services tab of Netbeans, add JBOSS server to your "servers" node.
If you are using MAVEN, netbeans compiles files and maven copies files to ./target directory. You need to create a symbolic link from .\target to JBOSS_HOME\standalone\deployments. Under windows, an example command would be
cd %JBOSS_HOME%\standalone\deployments
mklink /d MyWebApplication.war %PROJECTS_HOME%\MyWebApplication\target\MyWebApplication-1.0.0
The above creates a symbolic link from %JBOSS_HOME%\standalone\deployments\MyWebApplication.war to \target\MyWebApplication-1.0.0 which is where maven transfers all files after compilation, or after a jsp, html or any other file changes.
Last think to do is to create a CentralManagement.war.dodeploy file in %JBOSS_HOME%\standalone\deployments. This file will tell JBOSS to deploy the war "file" as a web application
Start the server in debug mode and It will track changes inside methods. Other changes It will ask to restart the module.
Deploy the app as exploded (project.war folder), add in your web.xml:
<web-app>
<context-param>
<param-name>org.jboss.weld.development</param-name>
<param-value>true</param-value>
</context-param>
Update the web.xml time every-time you deploy (append blank line):
set PRJ_HOME=C:\Temp2\MyProject\src\main\webapp
set PRJ_CLSS_HOME=%PRJ_HOME%\WEB-INF\classes\com\myProject
set JBOSS_HOME= C:\Java\jboss-4.2.3.GA-jdk6\server\default\deploy\MyProject.war
set JBOSS_CLSS_HOME= %JBOSS_HOME%\WEB-INF\classes\com\myProject
copy %PRJ_CLSS_HOME%\frontend\actions\profile\ProfileAction.class %JBOSS_CLSS_HOME%\frontend\actions\profile\ProfileAction.class
copy %PRJ_CLSS_HOME%\frontend\actions\profile\AjaxAction.class %JBOSS_CLSS_HOME%\frontend\actions\profile\AjaxAction.class
ECHO.>>%JBOSS_HOME%\WEB-INF\web.xml
In case you are working with the Eclipse IDE there is a free plugin Manik-Hotdeploy.
This plugin allows you to connect your eclipse workspace with your wildfly deployment folder. After a maven build your artifact (e.g. war or ear) will be automatically pushed into the deployment folder of your server. Also web content files (e.g. .xhtml .jsf ...) will be hot deployed.
The plugin runs for wildfly, glassfish and payara.
Read the section JBoss/Wildfly Support for more details.
In jboss-5.2.0-eap\server\default\deploy\hdscanner-jboss-beans.xml
<property name="scanPeriod">2000</property>
And, in your web.xml:
<context-param>
<param-name>facelets.DEVELOPMENT</param-name>
<param-value>true</param-value>
</context-param>
<context-param>
<param-name>facelets.REFRESH_PERIOD</param-name>
<param-value>0</param-value>
</context-param>
<context-param>
<param-name>org.jboss.seam.core.init.debug</param-name>
<param-value>true</param-value>
</context-param>
Use Ant script and make target deploy.
The deploy target should:
Stop JBoss
Copy the ear or war to the deploy directory
Start JBoss
==> No caching + also no out of memory issues after subsequent deploys during testing.