I have an imported CSV file with string values.
In this file there are amounts, of which several lines equal 0,00
I want to create a TotalCA column by adding several fields in my table and convert it to a numeric value.
I use the toDecimal function and the values are all returned NULL and the created column is grayed..
I have done a lot of research and I can't find a solution. Can you help me?
Thank you
Lea
I made an example csv data if I understand you correctly:
Like you said, some rows are enriched with values greater than 0, and others contain "0.00" when it is a zero value. Actually, the row data contains different data type, int and decimal.
For these reason and as I tested, no matter toDecimal(), toFloat() or toDouble(), all of the functions don't work. I use Derived column expression to do the data conversion.
We can't keep these data and only can choose one type of them. If you choose the decimal or float, other rows data would be converted to '11.0', I think that also doesn't you want.
Source Projection: I preset the column type to double:
(Decimal can't keep '0.00', it only returns '0')
In one word, the only way is that use String data type to keep the data. And also use String data type to receive the data in sink dataset.
HTH.
Thank you all for your answers.
Here is my CSV file
If I go to the Source Projection module and change the type of my column LFC1_UM01S to decimal this is what I get:
Why are some values considered as NULL?
To decimal column
I have a number field in report which is having below type of values.
19707.51
9834.01
Now I need to format the above field to get the decimal place before 4 digits.
I tried giving this
mid(totext({Command_2.INVOICE_AMT},4),1,1)+'.'+
mid(totext({Command_2.INVOICE_AMT},4),2,length(totext({Command_2.INVOICE_AMT},4))-1)
Required output is
1.970.751,00
983.401,00
Create a formula which multiplies your values by 100.
Use the Format Editor for the formula. Choose an existing format or define your own if you need to.
I want to visualise the below excel table in Tableau.
When adding this table to Tableau it shows Salary values as String and thus under Dimension Tab and not under Measure, thus cannot make proper graph from it.
How to convert this Salary range values to Int ?
As #Alexandru Porumb suggested, the best solution is to have a min_salary column and a max_salary column — unless you really have the actual salary available which is even better.
If you don’t want to revise the incoming data, you can get the same effect using the Split() function in a calculated field from Tableau to derive two integer fields from the original string field.
For example, you could define a calculated field called min_salary as INT(SPLIT([Salary], ‘-‘, 1)). Split() extracts part of a string based on a separator string. Int() converts the string to an integer.
You could simplify the way it sees the data and separate the salary column into Min and Max, thus you wouldn't have the hyphen that makes Tableau consider the entry as a string.
Simplistic idea, I know but it may help until a better solution will be provided.
Hope it helps
I am trying to find a way to round a field in SSRS to a dynamic number of decimal places. I know I can format it dynamically, and it may eventually come to that, but many of my users are going to take this report directly to Excel and are going to want to have actual numeric fields.
My t-SQL code includes these declared variables:
NumLong01 DECIMAL(23,8)
, NumLongDP01 INTEGER
The first set of entries in this table is for headers and rounding parameters. So I add values for these two as:
NULL
,4
and then I add the actual table values as:
543210987654321.87654321
,NULL
That way I can put a whole series of numbers into the table but they all have to be formatted the same way.
Running this query yields:
When I go to ReportBuilder, my field has this expression:
=Fields!NumLong01.Value
If I want to format a certain number of decimal places, I can just do this:
=Round(Fields!NumLong01.Value,2) or some such. What I tried to do, though, was to make it dynamic:
=Round(Fields!NumLong01.Value,First(Fields!NumLongDP01.Value, "DataSet1"))
This ended up rounding to 0 decimal places. I subsequently learned--by just using the second half in my field--that this was a NULL value. So I tried Sum instead of First--again, just in my field--and got the 4 that I expected. Great, so now I had my number, and I just put that in as my rounding:
=Round(Fields!NumLong01.Value,Sum(Fields!NumLongDP01.Value, "DataSet1"))
Only problem is, this yields an error. Next I asked myself if maybe it wasn't seeing this as a number for some reason. So i just added it onto my field. No problems. So I really don't know what it's doing. Is it thinking that this field might become so long that it will round to an illegal number of decimals places?
Now, I can do this:
=IIf(Sum(Fields!NumLongDP01.Value, "DataSet1") = 8,Round(Fields!NumLong01.Value,8),IIf(Sum(Fields!NumLongDP01.Value, "DataSet1") = 7,Round(Fields!NumLong01.Value,7),IIf(Sum(Fields!NumLongDP01.Value, "DataSet1") = 6,Round(Fields!NumLong01.Value,6),IIf(Sum(Fields!NumLongDP01.Value, "DataSet1") = 5,Round(Fields!NumLong01.Value,5),IIf(Sum(Fields!NumLongDP01.Value, "DataSet1") = 4,Round(Fields!NumLong01.Value,4),IIf(Sum(Fields!NumLongDP01.Value, "DataSet1") = 3,Round(Fields!NumLong01.Value,3),IIf(Sum(Fields!NumLongDP01.Value, "DataSet1") = 2,Round(Fields!NumLong01.Value,2),IIf(Sum(Fields!NumLongDP01.Value, "DataSet1") = 1,Round(Fields!NumLong01.Value,1),Round(Fields!NumLong01.Value,0)))))))))
...and that works. But it seems like such a ridiculous way to go about it.
I'm also comfortable passing only rounded numbers out of t-SQL. But then I run into the problem of showing only a certain number of decimals on the report, because in the number formatting it doesn't allow for a dynamic number of decimal places for some reason.
Any ideas would be appreciated.
This isn't an exhaustive list of ways to accomplish dynamic rounding or number formatting as you can achieve this using custom code in the report or by adapting your dataset's SQL query.
Using Rounding:
The first set of entries in this table is for headers and rounding parameters. That way I can put a whole series of numbers into the table but they all have to be formatted the same way.
To avoid building expressions in your report that require aggregate functions such First and Sum and generating a blank row that you then have to remove, consider just entering the number of decimal places for every row instead of using a header row. The costs (storage and expression evaluation) are low even if it seems redundant.
This means that instead of using: =Round(Fields!NumLong01.Value,First(Fields!NumLongDP01.Value, "DataSet1")) you can use =Round(Fields!NumLong01.Value,Fields!NumLongDP01.Value) either as an expression or as a calculated field in DataSet1 or whatever your dataset is called.
Using Number Formatting:
But then I run into the problem of showing only a certain number of decimals on the report, because in the number formatting it doesn't allow for a dynamic number of decimal places for some reason.
You can define custom formatting for the NumLong01 field in the report and make it dynamic using an expression to build your custom formatting string.
Open the Text Box Properties for the NumLong01 textbox or tablix field
Open Number tab and select Custom from the Category list
Click the fx button and use the following expression ="0." + StrDup(First(Fields!NumLongDP01.Value, "DataSet1"), "0")
Using your example data, this expression would produce the custom formatting string 0.0000 which changes 543210987654321.87654321 to 543210987654321.8765. For your information, StrDup duplicates the specified string X number of times.
In cases where the fractional part of the number is less than the decimal precision required, this formatting string will pad it with 0s. If that's not desired, change the string to be duplicated to "#" like so: StrDup(First(Fields!NumLongDP01.Value, "DataSet1"), "#").
You can also use this method as a calculated field in the dataset but only if you have removed the header row and are entering the decimal places for every row as mentioned earlier. This is because you can't use the aggregate function in the calculated field expression.
To do this, add a calculated field to your dataset with the expression: =Format(Fields!NumLong01.Value, "0." + StrDup(Fields!NumLongDP01.Value, "0"))
I have a text field that displays 3 parameters with different formats. It has a Date value, a BigDecimal value and a value that has to be displayed using percentage display.
Can I use a single text field for this or do I have to use one text field for each to have the correct format for each?
You have a few approaches, presuming it is one of the three parameters you want to display in the same location:
Use three different fields and a PrintWhenExpression for each parameter.
Convert the different fields to a single String variable, with appropriate formatting, and then a single field for that variable value.
The second approach is probably the most applicable for your task. For the conversions, look at:
BigDecimal.toString()
SimpleDateFormat
String.sprintf
See also:
Java: Literal percent sign in printf statement