I am trying to write the array values to CSV file in MATLAB using the following code
m=[3 12 15 ; 4 23 565];
dlmwrite('C:\Users\amar-admin\Desktop\abc.txt', m)
type C:\Users\amar-admin\Desktop\abc.txt
the output printed in the console is
3,12,15
4,23,565
but the output in File is
3,12,154,23,565
You may want to set the 'newline' option to 'pc':
dlmwrite('C:\Users\amar-admin\Desktop\abc.txt', m, 'newline', 'pc');
This will ensure that the file is created with a carriage return (\r) and a line feed (\n) at the end of each line, instead of potentially just a line feed, which could affect how it is displayed in certain text viewers. See this post for more information about the differences between \n and \r.
the issue was solved using .rtf extension
dlmwrite('C:\Users\amar-admin\Desktop\abc.rtf', m)
But, I still wonder if same is possible to .txt file
[Edited:] I have a file data2007a.csv and I copied and pasted (using TextEdit in MacBook) the first consecutive few lines to a new file datatest1.csv for testing:
Nomenclature,ReporterISO3,ProductCode,ReporterName,PartnerISO3,PartnerName,Year,TradeFlowName,TradeFlowCode,TradeValue in 1000 USD
S3,ABW,0,Aruba,ANT,Netherlands Antilles,2007,Export,6,448.91
S3,ABW,0,Aruba,ATG,Antigua and Barbuda,2007,Export,6,0.312
S3,ABW,0,Aruba,CHN,China,2007,Export,6,24.715
S3,ABW,0,Aruba,COL,Colombia,2007,Export,6,95.885
S3,ABW,0,Aruba,DOM,Dominican Republic,2007,Export,6,11.432
I wanted to use textscan to read it into MATLAB with only columns 2,3,5 (starting from the second row) and I wrote the following code
clc,clear all
fid = fopen('datatest1.csv');
data = textscan(fid,'%*s %s %d %*s %s %*[^\n]',...
'Delimiter',',',...
'HeaderLines',1);
fclose(fid);
But I ended up with only the second row of columns 2,3 and 5:
I then keep the first row in data2007a.csv and selected several others to saved as datatest2.csv:
Nomenclature,ReporterISO3,ProductCode,ReporterName,PartnerISO3,PartnerName,Year,TradeFlowName,TradeFlowCode,TradeValue in 1000 USD
S3,ABW,1,Aruba,USA,United States,2007,Export,6,1.392
S3,ABW,1,Aruba,VEN,Venezuela,2007,Export,6,5633.157
S3,ABW,2,Aruba,ANT,Netherlands Antilles,2007,Export,6,310.734
S3,ABW,2,Aruba,USA,United States,2007,Export,6,342.42
S3,ABW,2,Aruba,VEN,Venezuela,2007,Export,6,63.722
S3,AGO,0,Angola,DEU,Germany,2007,Export,6,105.334
S3,AGO,0,Angola,ESP,Spain,2007,Export,6,8533.125
And I wrote:
clc,clear all
fid = fopen('datatest2.csv');
data = textscan(fid,'%*s %s %d %*s %s %*[^\n]',...
'Delimiter',',',...
'HeaderLines',1);
fclose(fid);
data{1}
It gives exactly what I wanted:
When I use the same code for my original data file data2007a.csv, it goes as in the first case.
What is going wrong and how can I fix it?
[Added:] If one replicates my experiments1, one can find that both cases work and the problem does not exist! I really don't know what is going on.
1 For "replicate" I mean copy-and-paste the data given above and save it as two new files, say, datatest4a.csv and datatest4b.csv. I used visdiff('datatest1.csv', 'datatest4a.csv') to compare two files and it returned:
Given how you fixed it, I think this is an end-of-line character issue. This sometimes comes up when moving text files between Windows and Unix based systems, as they use different conventions.
When you add %*[^\n] to the end of a textscan format, as you have here. it means to skip everything to the end of line. But if it expects a specific end of line character, and can't find one, it will skip everything to the end of the file. This would explain why you get one row correctly read and then nothing else.
If you don't specify what the end of line character is, Matlab appears to default to... something... in this not very clear specification in the help:
The default end-of-line sequence is \n, \r, or \r\n, depending on the contents of your file.
One way to try and cure this without having to create a new file would be to add this 'EndOfLine', '\r\n' to your textscan call:
If you specify '\r\n', then textscan treats any of \r, \n, and the
combination of the two (\r\n) as end-of-line characters.
This will hopefully handle most standard(ish) EOL conventions. It is likely that copy-pasting and saving with a different bit of software than was originally used to create the file changed the end of line characters such that Matlab was able to recognise them.
I have a perl script that uses the expect library to login to a remote system. I'm getting the final output of the interaction with the before method:
$exp->before();
I'm saving this to a text file. When I use cat on the file it outputs fine in the terminal, but when I open the text file in an editor or try to process it the formatting is bizarre:
[H[2J[1;19HCIRCULATION ACTIVITY by TERMINAL (Nov 6,14)[11;1H
Is there a better way to save the output?
When I run enca it's identified as:
7bit ASCII characters
Surrounded by/intermixed with non-text data
you can remove none ascii chars.
$str1 =~ s/[^[:ascii:]]//g;
print "$str1\n";
I was able to remove the ANSI escape codes from my output by using the Text::ANSI::Util library's ta_strip() function:
my $ansi_string = $exp->before();
my $clean_string = ta_strip($ansi_string);
I am writing a Matlab function that does some file manipulation as follows. I take the input file, read it line by line and write it to an output file. If the line contains a keyword, I do some further processing before writing the output. My problem is this: If the input line contains an escape character, it messes up the fprintf that I use to write the output. For example, if the input line contains a % sign, the rest of the line does not show up in the output. So, my question is: is there a way to force fprintf to ignore all escape sequences and print the literal string? Thanks in advance for the help.
Sample code below:
fptr_read = fopen('read_file.txt','r'); fptr_write = fopen('write_file.txt','w');
while(~feof(fptr_read))
current_line = fgetl(fptr_read);
fprintf(fptr_write,current_line);
end
If current_line looks like 'Gain is 5% larger', it will get written as 'Gain is 5'. I want the line reproduced verbatim without manually having to check for presence of escape characters.
I had a similar problem once, and solved it like this:
fprintf(fp,'%s',stringWithEscapesIWant)
I have a file full of ascii data. How would I append a string to the first line of the file? I cannot find that sort of functionality using fopen (it seems to only append at the end and nothing else.)
The following is a pure MATLAB solution:
% write first line
dlmwrite('output.txt', 'string 1st line', 'delimiter', '')
% append rest of file
dlmwrite('output.txt', fileread('input.txt'), '-append', 'delimiter', '')
% overwrite on original file
movefile('output.txt', 'input.txt')
Option 1:
I would suggest calling some system commands from within MATLAB. One possibility on Windows is to write your new line of text to its own file and then use the DOS for command to concatenate the two files. Here's what the call would look like in MATLAB:
!for %f in ("file1.txt", "file2.txt") do type "%f" >> "new.txt"
I used the ! (bang) operator to invoke the command from within MATLAB. The command above sequentially pipes the contents of "file1.txt" and "file2.txt" to the file "new.txt". Keep in mind that you will probably have to end the first file with a new line character to get things to append correctly.
Another alternative to the above command would be:
!for %f in ("file2.txt") do type "%f" >> "file1.txt"
which appends the contents of "file2.txt" to "file1.txt", resulting in "file1.txt" containing the concatenated text instead of creating a new file.
If you have your file names in strings, you can create the command as a string and use the SYSTEM command instead of the ! operator. For example:
a = 'file1.txt';
b = 'file2.txt';
system(['for %f in ("' b '") do type "%f" >> "' a '"']);
Option 2:
One MATLAB only solution, in addition to Amro's, is:
dlmwrite('file.txt',['first line' 13 10 fileread('file.txt')],'delimiter','');
This uses FILEREAD to read the text file contents into a string, concatenates the new line you want to add (along with the ASCII codes for a carriage return and a line feed/new line), then overwrites the original file using DLMWRITE.
I get the feeling Option #1 might perform faster than this pure MATLAB solution for huge text files, but I don't know that for sure. ;)
How about using the frewind(fid) function to take the pointer to the beginning of the file?
I had a similar requirement and tried frewind() followed by the necessary fprintf() statement.
But, warning: It will overwrite on whichever is the 1st line. Since in my case, I was the one writing the file, I put a dummy data at the starting of the file and then at the end, let that be overwritten after the operations specified above.
BTW, even I am facing one problem with this solution, that, depending on the length(/size) of the dummy data and actual data, the program either leaves part of the dummy data on the same line, or bring my new data to the 2nd line..
Any tip in this regards is highly appreciated.