I have an ASPxGridView with the following columns:
<dx:GridViewDataCheckColumn FieldName="ProtocolEnabled" Caption="Protocol Enabled">
<DataItemTemplate>
<asp:Literal ID="ltProtocolEnabled" runat="server" />
</DataItemTemplate>
</dx:GridViewDataCheckColumn>
<dx:GridViewDataColumn FieldName="ProtocolCount" Width="0" Caption="Protocol Count">
The checkbox column has a template with a literal in it so I can display Yes/No instead of an empty checkbox, but that's probably TMI. What I need to do is this:
In edit mode: When ProtocolEnabled is checked, I need to enable the ProtocolCount textbox. When ProtocolEnabled is unchecked, I need to disable ProtocolCount and set its text to 0.
I am not asking for a step-by-step, but a general pointer in the right direction. I would like to use callbacks if at all possible. I also promise I will not delete this question as you are answering it =P.
Update: Thanks to answerer, I was sent in the direction I needed to go. Here's the code I used:
<dx:GridViewDataCheckColumn FieldName="ProtocolEnabled" Caption="Protocol Enabled" CellStyle-HorizontalAlign="Left">
<DataItemTemplate>
<asp:Literal ID="ltProtocolEnabled" runat="server" />
</DataItemTemplate>
<PropertiesCheckEdit>
<ClientSideEvents CheckedChanged="function(s,e) {ProtocolEnabledChecked(s);}" />
</PropertiesCheckEdit>
</dx:GridViewDataCheckColumn>
<dx:GridViewDataColumn FieldName="ProtocolCount" Width="0" Caption="Protocol Count">
function ProtocolEnabledChecked(ck) {
var x = gvApplicationServer.GetEditor("ProtocolCount");
if (ck.GetValue()) {
x.enabled = true;
}
else {
x.SetValue(0);
x.enabled = false;
}
}
It's clientside code instead of callback.
First of all Check this for Accessing Controls Contained within Templates
To show Yes/No
On HtmlRowCreated Event access control and set it's text property after finding the control in the
Literal literal = ASPxGridView1.FindRowCellTemplateControl(e.VisibleIndex,
ASPxGridView1.Columns["Name"] as GridViewDataColumn, "ASPxButtonEdit1") as Literal ;
literal.Text = (bool)grid.GetRowValues(e.VisibleIndex, "columnName") ? "Yes" : "No";
In Edit Row Template Do as you did as above..
If you want to do some client side functionality then .. create client side event OnClientClick and use checkbox client side method. chkclientinstanceName.getValue(); or other to check with it is checked or not..
these controls are client accessible so enable/ disable by using txtClientName.SetEnabled(true/false);
for more help go to the
DevExpress.Web.ASPxEditors ClientScript namespace..
Try this step by step .. hope it will be helpful..
Related
In React-Boostrap-Typeahead, I need to capture the moment after the mouse has been clicked, but before the menu selection gets loaded into the Typeahead's box.
This is because I need to check items being selected, and for some of them, I need to display an alert with a Yes/No warning. Only if Yes is clicked can I proceed with setting that value into the box. Otherwise I need to reject the selection and keep it whatever it was prior to the mouse click.
I can't use onChange because by that point the selection is already in the box.
I can't use onInputChange because that is for typing rather than for menu selection. I need the post-menu-select, pre-box change.
If there are any workarounds please let me know.
You should be able to achieve what you're after using onChange:
const ref = useRef();
const [selected, setSelected] = useState([]);
return (
<Typeahead
id="example"
onChange={(selections) => {
if (!selections.length || window.confirm('Are you sure?')) {
return setSelected(selections);
}
ref.current.clear();
}}
options={options}
ref={ref}
selected={selected}
/>
);
Working example: https://codesandbox.io/s/objective-colden-w7ko9
I'm having a problem losing UI state changes after my observables change and was hoping for some suggestions.
First off, I'm polling my server for updates. Those messages are in my view model and the <ul> renders perfectly:
When my user clicks the "reply" or "assign to" buttons, I'm displaying a little form to perform those actions:
My problem at this point was that when my next polling call returned, the list re-binds and I lose the state of where the form should be open at. I went through adding view model properties for "currentQuestionID" so I could use a visible: binding and redisplay the form after binding.
Once that was complete, the form displays properly on the "current item" after rebinding but the form values are lost. That is to say, it rebinds, rebuilds the form elements, shows them, but any user input disappears (which of course makes sense since the HTML was just regenerated).
I attempted to follow the same pattern (using a value: binding to set the value and an event: {change: responseChanged} binding to update an observable with the values). The HTML fragment looks like this:
<form action="#" class="tb-reply-form" data-bind="visible: $root.showMenu($data, 'reply')">
<textarea id="tb-response" data-bind="value: $root.currentResponse, event: {keyup: $root.responseChanged}"></textarea>
<input type="button" id="tb-submitResponse" data-bind="click: $root.submitResponse, clickBubble: false" value="Send" />
</form>
<form action="#" class="tb-assign-form" data-bind="visible: $root.showMenu($data, 'assign')">
<select id="tb-assign" class="tb-assign" data-bind="value: $root.currentAssignee, options: $root.mediators, optionsText: 'full_name', optionsValue: 'access_token', optionsCaption: 'Select one...', event: {change: $root.assigneeChanged}">
</select>
<input type="button" id="tb-submitAssignment" data-bind="click: $root.submitAssignment, clickBubble: false" value="Assign"/>
</form>
Now, I end up with what seems like an infinite loop where setting the value causes change to happen, which in turn causes value... etc.
I thought "screw it" just move it out of the foreach... By moving the form outside of each <li> in the foreach: binding and doing a little DOM manipulation to move the form into the "current item", I figured I wouldn't lose user inputs.
replyForm.appendTo(theContainer).show();
It works up until the first poll return & rebind. Since the HTML is regenerated for the <ul>, the DOM no longer has my form and my attempt to grab it and do the .appendTo(container) does nothing. I suppose here, I might be able to copy the element into the active item instead of moving it?
So, this all seems like I'm missing something basic because someone has to have put a form into a foreach loop in knockout!
Does anybody have a strategy for maintaining form state inside a bound item in knockout?
Or, possibly, is there a way to make knockout NOT bind anything that's already bound and only generate "new" elements.
Finally, should I just scrap knockout for this and manually generate for "new items" myself when each polling call returns.
Just one last bit of info; if I set my polling interval to something like 30 seconds, all the bits "work" in that it submits, saves, rebinds, etc. I just need the form and it's contents to live through the rebinding.
Thanks a ton for any help!
Well, I figured it out on my own. And it's embarrassing.
Here is a partial bit of my VM code:
function TalkbackViewModel( id ) {
var self = this;
talkback.state.currentTalkbackId = "";
talkback.state.currentAction = "";
talkback.state.currentResponse = "";
talkback.state.currentAssignee = "";
self.talkbackQueue = ko.observableArray([]);
self.completeQueue = ko.observableArray([]);
self.mediators = ko.observableArray([]);
self.currentTalkbackId = ko.observable(talkback.state.currentTalkbackId);
self.currentAction = ko.observable(talkback.state.currentAction);
self.currentResponse = ko.observable(talkback.state.currentResponse);
self.currentAssignee = ko.observable(talkback.state.currentAssignee);
self.showActionForm = function(data, action) {
return ko.computed(function() {
var sameAction = (self.currentAction() == action);
var sameItem = (self.currentTalkbackId() == data.talkback_id());
return (sameAction && sameItem);
}, this);
};
self.replyToggle = function(model, event) {
// we're switching from one item to another. clear input values.
if (self.currentTalkbackId() != model.talkback_id() || self.currentAction() != "reply") {
self.currentResponse("");
self.currentAssignee("");
self.currentTalkbackId(model.talkback_id());
}
My first mistake was trying to treat the textarea & dropdown the same. I noticed the dropdown was saving value & reloading but stupidly tried to keep the code the same as the textarea and caused my own issue.
So...
First off, I went back to the using the $root view model properties for currentAssignee and currentResponse to store the values off and rebind using value: bindings on those controls.
Next, I needed to remove the event handlers:
event: { change: xxxChanged }
because they don't make sense (two way binding!!!!). The drop down value changes and updates automatically by using the value: binding.
The textarea ONLY updated on blur, causing me to think I needed onkeyup,onkeydown, etc. I got rid of those handlers because they were 1) wrong, 2) screwing up the value: binding creating an infinite loop.
I only needed this on the textarea to get up-to-date value updates to my viewmodel property:
valueUpdate: 'input'
At this point everything saves off & rebinds and I didn't lose my values but my caret position was incorrect in the textarea. I added a little code to handle that:
var item = element.find(".tb-assign");
var oldValue = item.val();
item.val('');
item.focus().val(oldValue);
Some browsers behave OK if you just do item.focus().val(item.val()); but i needed to actually cause the value to "change" in my case to get the caret at the end so I saved the value, cleared it, then restored it. I did this in the event handler for when the event data is returned to the browser:
$(window).on("talkback.retrieved", function(event, talkback_queue, complete_queue) {
var open_mappings = ko.mapping.fromJS(talkback_queue);
self.talkbackQueue(open_mappings);
if (talkback_queue) self.queueLength(talkback_queue.length);
var completed_mappings = ko.mapping.fromJS(complete_queue);
self.completeQueue(completed_mappings);
if (self.currentTalkbackId()) {
var element = $("li[talkbackId='" + self.currentTalkbackId() + "']");
if (talkback.state.currentAction == "assign") {
var item = element.find(".tb-assign");
var oldValue = item.val();
item.val('');
item.focus().val(oldValue);
} else {
var item = element.find(".tb-response");
var oldValue = item.val();
item.val('');
item.focus().val(oldValue);
}
}
}
);
So, my final issue is that if I used my observables in my method "clearing" the values when a new "current item" is selected (replyToggle & assignToggle), they don't seem to work.
self.currentResponse("");
self.currentAssignee("");
I cannot get the values to clear. I had to do some hack-fu and added the line below that to just work around it for now:
$(".tb-assign").val("");
i have a basic form . inside it , i have two fields(dropdown and textbox) whose behaviour is dependent on each other. I want to reset the textbox based on the change in dropdown. Also i want to add/integrate into the DOM as a new element so that validity etc can be taken care of which is to say i can use my $dirty to hide/show the message .
Use ng-model and $watch
<select ng-model="dropdown" ng-options="**"><!-- --></select>
<textbox ng-model="textbox"></textbox>
$scope.$watch('dropdown', function () {
$scope.textbox = '';
});
http://docs.angularjs.org/api/ng.$rootScope.Scope#$watch
Two things:
To have one value be dependant on another, just listen to the ng-change event of the first and then update the variable that the second one is bound to. eg:
$scope.selectChanged = function() {
$scope.textValue = '';
}
To do validation, one approach I like to take is to have an "error" element declared and just show/hide it when needed.
Here's a quick snippet that illustrates both approaches
http://jsfiddle.net/marplesoft/ULhVS/
I have the following gwt-bootstrap ui.xml :
<b:Typeahead ui:field="typeahead">
<b:TextBox ui:field="searchBox" searchQuery="true"
placeholder="Search..." />
</b:Typeahead>
How can i programmatically take the suggested response "On Click" of the the typeahead item and set it as Text into the searchbox?
Well the Adarsha Answer dont really work in my case, because i use full gwt. So my Solution is :
typeahead.setUpdaterCallback(new Typeahead.UpdaterCallback() {
#Override
public String onSelection(Suggestion selectedSuggestion) {
String text = selectedSuggestion.getDisplayString();
return null;
}
});
The below link will definitely helps you -
Get selected items value for Bootstrap's typeahead
once you get the selected value its just a matter of doing textbox.setValue(value).
I'm building a "buffet menu list" form which has a lot of options for the "menu" radiobutton.
However I noted that all those values are "inline" just like in this example: http://demo.atk4.com/demo.html?t=14
I'd like to know in first instance how could I add a line break on every value, and then, how could I simulate groups by adding some sort of < p> < /p> between specific option values (logical grouping).
Thanks in advance!
There are two solutions I can think of.
Look at the examples here for some inspiration:
http://agiletoolkit.org/doc/grid/columns
1. Adding custom field to grid
First, create a form with no mark-up:
$form = $this->add('Form',null,null,array('form_empty'));
Next, add Grid into a form like this:
$grid = $form->add('Grid'); // or MVCGrid if you are using models
Add a column for selection:
$grid->addColumn('template','selection')
->setTemplate('<input type=radio name=selection value="<?$id?>"/>');
Finally - make sure the column 'selection' is first (or last)
$grid->addOrder()->move('selection','first')->now();
Finally you need to manually look into the POST data, because it's not a real form column.
if($form->isSubmitted()){
$this->js()->univ()->successMessage('Selection is '+((int)$_POST['selection']))
->execute();
}
You must remember that accessing POST directly exposes you to injection attack and you must validate it properly. Grid also MUST be inside the form, however you can place submit button anywhere else on your page. You can also use "Form_Plain", see "http://agiletoolkit.org/whatsnew" for an example.
2. Using JavaScript and hidden field
In this example you can add a bunch of Radio button elements and tie them to a form. I've also using "Lister" here instead of "Grid", of course you can mix-and-match those approaches.
$form = $this->add('Form');
$selection = $form->addField('line','selection');
// can be placed anywhere.
$menu = $this->add('MVCLister',null,null,array('view/menu'));
$menu->setModel('MenuItems');
$menu->js(true)->find('input[type=radio]')->click(
$selection->js()->_enclose()->val(
$this->js()->_selectorThis()->val()
);
);
// produces $('#menu_id').find('input[type=radio]').click(function(){
// $('#selection_id').val( $(this).val() );
// }
Your view/menu.html template file could look like this:
<div class="menu-container">
<?rows?><?row?>
<div><input type="radio" name="anything" value="<?$id?>"> <?$name?> </div>
<?/row?><?/rows?>
</div>
EDIT: code which worked for Fernando
$grid->addColumn('template','Menu')
->setTemplate('<input type=\'radio\' name=\'selection\' value="<?$value?>"/> <?$value?>');
if($form->isSubmitted()){
$this->js()->univ()
->successMessage('Hoy: <b>'.$_POST['selection'].'</b>')->execute();
}