I am compiling MongoDB from source with instructions from http://www.mongodb.org/display/DOCS/Building+for+Linux
I ran into this error after ran "scons all":
rty/js-1.7/jsscan.c
third_party/js-1.7/jsscan.c:112:22: error: jsautokw.h: No such file or directory
third_party/js-1.7/jsscan.c: In function 'FindKeyword':
third_party/js-1.7/jsscan.c:122: warning: label 'test_guess' defined but not used
third_party/js-1.7/jsscan.c:119: warning: label 'got_match' defined but not used
scons: *** [third_party/js-1.7/jsscan.o] Error 1
scons: building terminated because of errors
I am on a 64 bit ubuntu 10.04. gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5), scons version is:
script: v1.2.0.d20100117.r4629, 2010/01/17 22:23:21, by scons on scons-dev
engine: v1.2.0.d20100117.r4629, 2010/01/17 22:23:21, by scons on scons-dev
Does anyone have the same problem? There are similar errors reported for this jsscan file in earlier versions, but has been fixed since.
Dude it worked! Do this:
sudo apt-get remove xulrunner-1.9.2-dev xulrunner-1.9.2
curl -O ftp://ftp.mozilla.org/pub/mozilla.org/js/js-1.7.0.tar.gz
tar zxvf js-1.7.0.tar.gz
cd js/src
export CFLAGS="-DJS_C_STRINGS_ARE_UTF8"
make -f Makefile.ref
sudo JS_DIST=/usr make -f Makefile.ref export
Then run scons all again
There is no need to uninstall "xulrunner-1.9.2-dev" and "xulrunner-1.9.2" as it's also uninstalls other packages you may need later.
Just install the newer version of scons package (I used for it scons-2.1.0).
Download scons-2.1.0.tar.gz
Install it and use the installed one instead of the scons v1.2.0 repository package for Ubuntu 10.04.
It worked for me without any additional tricks.
Related
└─$ python3 -m venv venv
Error: name 'cmd' is not defined
┌──()-[~/Documents/Software Development/DjangoAuth/simplejwt]
└─$ source venv/bin/activate
source: no such file or directory: venv/bin/activate
It used to work fine on my other laptop while I just freshly installed new OS here, it throwing an odd error.
This bug report (found by search) suggests you don't have python-venv package installed. Install it:
sudo apt-get install -y python3-venv
The error message is due to a conflict in the versions of Python installed on my system. The package python3.10-venv depends on version 3.10.8-3 of Python, but version 3.10.9-1 is to be installed.
To resolve this issue, I tried the following:
Check the version of Python I have installed by running the command python3 --version.
If I have a version of Python other than 3.10.8-3, I tried uninstalling it and installing version 3.10.8-3 instead.
Once I have installed the correct version of Python, I install the python3-venv package again using the sudo apt-get install -y python3-venv command and it worked.
Thanks all who helped!
I've been trying to run the Rust Diesel crate on my Macbook M1 and it doesn't work. The final part of the compilation gets broken by the following error:
= note: ld: warning: ignoring file /usr/local/Cellar/libpq/14.1/lib/libpq.dylib, building for macOS-arm64 but attempting to link with file built for macOS-x86_64
Undefined symbols for architecture arm64:
When I get the info for libpq I get the following:
maxwellflitton#Maxwells-MacBook-Pro vanguard % brew info libpq
libpq: stable 14.1 (bottled) [keg-only]
Postgres C API library
https://www.postgresql.org/docs/14/libpq.html
/usr/local/Cellar/libpq/14.1 (2,335 files, 27.8MB)
Poured from bottle on 2022-01-09 at 00:14:32
From: https://github.com/Homebrew/homebrew-core/blob/HEAD/Formula/libpq.rb
License: PostgreSQL
==> Dependencies
Required: krb5 ✔, openssl#1.1 ✔
==> Caveats
libpq is keg-only, which means it was not symlinked into /usr/local,
because conflicts with postgres formula.
If you need to have libpq first in your PATH, run:
echo 'export PATH="/usr/local/opt/libpq/bin:$PATH"' >> ~/.zshrc
For compilers to find libpq you may need to set:
export LDFLAGS="-L/usr/local/opt/libpq/lib"
export CPPFLAGS="-I/usr/local/opt/libpq/include"
I've tried installing with the following command:
RUSTFLAGS='-L /usr/local/Cellar/libpq/14.1/lib' cargo install diesel_cli --no-default-features --features postgres --force
But I still get the same error. Will it just be easier to wipe the whole thing and start again and if so how would I do this? Other people on the internet using the M1 seem to be able to get round the problem with a simple brew install libpq. Never had any issues with my previous intel mac. My ~/.cargo/config.toml has the following configuration:
[target.aarch64-apple-darwin]
rustflags = '-L /usr/local/Cellar/libpq/14.1/lib -L /opt/homebrew/lib'
Surprisingly this worked
brew install postgresql libpq
cargo clean
cargo build
cargo install diesel_cli --no-default-features --features postgres
I think it had to do with installing diesel-cli before installing the necessary dependencies. Cleaning the cargo dependencies and reinstalling worked for me
on my M1 mac, I installed the postgresql client and library with brew:
brew install postgresql libpq
and attempted to install diesel_cli again, this time it worked fine:
cargo install diesel_cli --no-default-features --features postgres
for some reason, simply installing libpq was not enough to install diesel_cli, i had to install the postgres library and the client.
Encountered a similar problem, and the issue was coming from my brew config (I restored my filesystem from my mac Intel) :
❯ brew config
...
macOS: 12.6-x86_64
...
Therefore, brew was downloading packages built for intel processors. I uninstalled and reinstalled brew following their website and now brew config is correct:
❯ brew config
...
macOS: 12.6-arm64
...
Hope this helps!
I have a Mac M1 and installed both postgresql and libpq with brew
I eventually succeeded in installing diesel_cli with these lines in my ~/.cargo/config.toml file
[target.aarch64-apple-darwin]
rustflags = '-L /opt/homebrew/opt/libpq/lib -L /opt/homebrew/lib'
source was https://github.com/diesel-rs/diesel/issues/2605
~ $ gdalinfo --version
gdalinfo: symbol lookup error: /lib/libgdal.so.28: undefined symbol: proj_crs_get_datum_ensemble
Recently upgraded to Ubuntu 21.04 and things stopped working, tried removing all gdal, qgis installation and reinstall again and this is the latest. Previous error was https://gist.github.com/adoug/f551c96ae49bcf0dd4905cfb3ed1c910. Installing qgis from gui also comes up with an error Unable to install QGIS Desktop: Error while installing package: installed qgis-providers package post-installation script subprocess returned error exit status 127
~ $ pip3 install gdal
Requirement already satisfied: gdal in /usr/lib/python3/dist-packages (3.2.2)
~ $ pip3 uninstall gdal
Found existing installation: GDAL 3.2.2
Not uninstalling gdal at /usr/lib/python3/dist-packages, outside environment /usr
Can't uninstall 'GDAL'. No files were found to uninstall.
The whole install seems to be broken, is there a way to clean all and resinstall or somehow recover from this?
Not really for a fix for current issue, but used fresh anaconda install as a workaround to get gdal working again
conda update --all
conda install -c conda-forge gdal
Using homebrew on my El Capitan(10.11.6), i installed java and eclipse-ptp through the following commands:
brew cask install java
brew cask install eclipse-ptp
I have gcc and thus gfortran through homebrew from earlier.
Eclipse PTP got copied into the Apps successfully. I opened the application and created a helloworld demo project and tried to build it. I get the following message in the build console window:
make all
make: gfortran: No such file or directory
gfortran -O2 -g \
-o bin/demo \
src/demo.f90
make: *** [all] Error 1
I glean that this issue maybe due to improper setting of the path variable, what i do fail to understand is:
Given that all the installs happened through homebrew, why is this problem appearing?
How do i fix this issue?
Currently running Yosemite and unable to update to ruby 2.1.4 , see below.
Guidos-MacBook-Pro:~ Guido$ rvm install 2.1.4
Searching for binary rubies, this might take some time.
No binary rubies available for: osx/10.10/x86_64/ruby-2.1.4.
Continuing with compilation. Please read 'rvm help mount' to get more information on binary rubies.
Checking requirements for osx_brew.
/usr/local/bin/brew: /usr/local/Library/brew.rb: /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/bin/ruby: bad interpreter: No such file or directory
/usr/local/bin/brew: line 26: /usr/local/Library/brew.rb: Undefined error: 0
ERROR: '/bin' is not writable - it is required for Homebrew, try 'brew doctor' to fix it!
Requirements installation failed with status: 1.
So after I stepped away from the computer for a few hours and came back again, I figured out the issue was that Homebrew was broken after I updated OS to Yosemite. Here is the link http://ryantvenge.com/2014/09/ruby-homebrea-yosemite/ to the solution. If that is not working see commands below.
To fix Homebrew:
cd /System/Library/Frameworks/Ruby.framework/Versions
sudo ln -s Current 1.8
brew update
sudo rm 1.8
To update to ruby 2.1.4:
rvm install 2.1.4
rvm use 2.1.4