I like to run my editor full-screen. The only thing is, though, that when I do this, the word wrap only kicks in when the line hits the right edge of the screen. I would like it to do so, already when the line hits, say, column number 200.
How do I do that?
I would like it to happen in all modes, e.g., Org-mode. I added the line (global-visual-line-mode t) to my .emacs file, in order for the word wrapping also to work in org-mode.
I'm running Emacs 23.
I got it working! Here is what I added to my .emacs file to make it happen:
(add-hook 'text-mode-hook 'turn-on-auto-fill)
(add-hook 'text-mode-hook
'(lambda() (set-fill-column 80)))
Type M-x auto-fill-mode to activate automatic line-wrapping after a certain column. Then set the actual line width through the variable fill-column as described by user choroba (C-x f).
Note though that this works a bit differently from what other text editors do. M-q will re-format the current paragraph.
You can set the line width with C-xf (set-fill-column).
Afterwards, you might need to hit M-q to reformat the current paragraph (fill-paragraph), or select text to be justified and run fill-region.
The suggestion for turn-on-auto-fill will work if you want hard newlines in the files you're editing. If not, and you just want word-wrap, consider instead visual-fill-column-mode, which just does the normal word-wrap that would happen at the edge of the window, but at the specified fill-column.
See the Emacs manual (C-h r), node Filling. See in particular the first subnode in the menu, Auto Fill.
Related
Motivation: Using the defaults, Auto Fill mode seems not as useful as I might
have hoped: If I insert a sentence in the middle of a paragraph, only the current
line is re-filled. When I insert a sentence, I want the entire paragraph to be re-filled.
Question: How can I set auto-fill-function (or perhaps
normal-auto-fill-function) in my .emacs
file so that the paragraph is re-filled whenever a single line overflows?
I tried setting it to fill-paragraph, but then I cannot insert any spaces at the end of a paragraph (e.g., to add another word).
More details: I primarily use Auto Fill mode in the AUCTeX major mode for LaTeX.
The built-in Emacs documentation for auto-fill-mode states:
When auto-fill-mode is on, the auto-fill-function variable is
non-nil.
The value of normal-auto-fill-function specifies the function to use
for auto-fill-function when turning Auto Fill mode on.
The documentation for the normal-auto-fill-function variable
says that it is the function to use for auto-fill-function if Auto Fill mode is
turned on, and that the initial value is do-auto-fill.
You might like to try refill-mode. But in general, it's just tricky to make such a feature work well. Another approach is to only do the refill as part of the redisplay (i.e. without affecting the buffer's actual content). For that, try setting word-wrap or enabling visual-line-mode.
For LaTeX files you can try (requires AUCTeX)
(add-hook 'LaTeX-mode-hook '(lambda ()
(setq auto-fill-function 'LaTeX-fill-paragraph)))
but use it with caution.
Is there an equivalent to the fill-column variable for the "Wrap" mode (visual-line-mode) in Emacs? If not, how could I set a limit on the length of visual lines when the window/frame of the buffer is wider ?
In response to this question I created a minor mode called window-margin that accomplishes what #Stefan suggested in his answer.
Turn on window-margin-mode with:
(add-hook 'text-mode-hook 'turn-on-window-margin-mode)
The way you can still do it without installing window-margin is to use the longlines-mode that ships with Emacs, but is being phased out since there are some problems with longlines-mode, but here's the old way to do it if you want:
Turn on longlines-mode with something like:
(add-hook 'text-mode-hook 'longlines-mode)
which wraps text at the fill-column.
longlines-mode has been removed. For visual-line-mode, the simplest way is to make the window as narrow as you want it to be. You can do that with C-x 3 and then adjusting the size of the window. Or you can set a wide margin or wide fringes.
I personally keep all lines under 80 characters, but I also work on projects in teams where other programmers don't care about line length.
I love using whitespace-mode, but the long line visualization is really annoying when I'm working on projects where I shouldn't interfere with the long lines. It seems like it should be easy to turn off the long line visualization---I hit m-x global-whitespace-toggle-options l, and then can hit m-x global-whitespace-toggel-options ? to confirm that the "long-line visualization" is turned off. But long lines are still highlighted. I kill buffers and reload them, and highlighting is still there. I'm definitely using global, not local, whitespace-mode.
Why can't I turn off the long line visualization?
The last time I customized whitespace-mode, I noticed that my changes to the settings didn't have any effect in buffers that already existed; try recreating the buffer, or leaving and reentering whitespace-mode. In case you don't already know, you can use M-x customize-group whitespace to turn off that particular option entirely, rather than doing it manually.
Edit: Specifically you want to customize the whitespace-style variable. This lets you turn on and off individual styles. In this case you should turn off the ones labelled "(Face) Lines" and "(Face) Lines, only overlong part". The former changes the face of the whole line when it is overly long, while the latter only changes the face of the part that extends past the threshold.
(Other options in this group define the faces that whitespace-mode will use to highlight the styles you've turned on, the regexes it uses to identify certain situations, etc, but usually you only care about whitespace-style).
Set whitespace-line-column to a higher value (default is 80), so the highlighting of long lines doesn't kick in:
(setq whitespace-line-column 250)
I'm assuming that you already have whitespace-mode activated somewhere in your init.el or similar. If so, you can adapt duma's comment above, and either
Edit the elisp that sets whitespace-style to remove lines-tail. E.g., Emacs Prelude sets
(setq whitespace-style '(face tabs empty trailing lines-tail))
Simply change that to
(setq whitespace-style '(face tabs empty trailing))
If you don't want to directly edit that elisp, but rather override it later with your own code, do something like
(setq whitespace-style (delete 'lines-tail whitespace-style))
Unfortunately, if running Prelude with auto-loaded buffers (using something like Emacs Desktop), the initial setting will take precedence: for each buffer on which you want to see whitespace-style displayed as directed, you must [1]
kill the buffer
re-open the buffer
[1]: Note to OP: if there's another way to reload a buffer, please edit or comment this answer. I was hoping to find something like M-x reload-buffer but am not seeing anything like that with C-h a buffer.
How do I configure Emacs so that line wrapping does not break in the middle of a word?
If you want to emulate the behavior of an editor like Notepad, you might want to turn on visual line mode. While setting word-wrap will cause line wrapping at word boundaries, any action you take on a line (e.g., moving up/down or killing) will still respect the newline character. Visual line mode will treat each display line as though it had a newline at the end.
(visual-line-mode t)
Line to add in .emacs file:
(global-visual-line-mode t)
M-x toggle-truncate-lines disable allows you to disable visually line breaking.
M-x auto-fill-mode + M-q allows you to word wrap for real a pre-existing paragraph.
Add this to your init file:
(setq-default word-wrap t)
Alternatively, press C-h vword-wrap in Emacs and follow the "customize" link near the end.
I discovered longlines-mode only recently (I think I was spelunking through the Emacs Info documentation). It wraps as you would expect in other UI editors' word-wrap feature. It's especially useful when I'm reading or writing free text with no newlines (a la Microsoft Word) without the ugly mid-word wrapping that happens when you use M-x toggle-word-wrap.
See LongLines.
My configuration:
(setq longlines-wrap-follows-window-size t)
(global-set-key [(control meta l)] 'longlines-mode)
Notepad++ has a convenient feature: if you select a word in your text (not necessarily a keyword), the word is highlighted throughout the text. Can this be done in Emacs as well? And if so, how?
It doesn't necessarily have to work exactly like Notepad++ (i.e., via selection); ideally, I would like to set up a key binding that causes all occurrences of the word under cursor to be highlighted.
It would be great if the highlights were permanent, i.e., moving point away from a highlighted word should not cause the highlight to be removed.
Also, it would be useful if there was a solution that made it possible to navigate between highlights (using custom key bindings).
The hi-lock suggestions are good. I think it's easier to use the M-x versions, though:
M-x highlight-regexp RET <REGEXP>
M-x highlight-phrase RET <REGEXP>
highlight-phrase is just a bit of sugar around highlight-regexp that ignores case and translates a space in the regex to match arbitrary whitespace. Handy.
Maybe highlight-symbol.el at http://nschum.de/src/emacs/highlight-symbol/ is what you are looking for:
Type C-s, then type the current word or type C-w. As a bonus, you can now hit C-s again to search for the word.
This is called incremental search.
What I use is idle-highlight
http://www.emacswiki.org/emacs/IdleHighlight
M-x idle-highlight sets an idle timer that highlights all occurences in the buffer of the word under the point.
To enable it for all programming modes, in ~/.emacs.d/init.el:
;; highlight words
(add-hook 'prog-mode-hook (lambda () (idle-highlight-mode t)))
Light-symbol will highlight whatever symbol point is over.
Alternately, you can use occur, which lists all lines matching a regexp. It's useful to quickly see all functions in a class.
Nobody mentioned symbol-overlay mode. It's basically a better rewrite of highlight-symbol-mode. "Better" as in, lacks bugs of original highlight-symbol (such as, temporary highlight getting stuck, or the temporary highlight disappearing for moving inside the highlighted word; or not being able to highlight symbols like *), better integrated, and maintained. See "Advantages" paragraph of its README.
You can install it as usual, with M-xpackage-install (make sure to update package list beforehand with package-list-packages). For reference, at the bottom I attached code I use to enable the mode and disable a few of the more advanced features which you may or may not want.
Notepad++ has a convenient feature: if you select a word in your text (not necessarily a keyword), the word is highlighted throughout the text. Can this be done in Emacs as well? And if so, how?
Once you enable overlay-symbol, occurrences on the screen will be shown for every word that you put cursor upon after a timeout (timeout by default is 0.5s, can be configured with symbol-overlay-idle-time variable). If a word don't get highlighted, this means there's just one match on the screen (the one you put cursor upon), hence there's no need to highlight it.
It would be great if the highlights were permanent, i.e., moving point away from a highlighted word should not cause the highlight to be removed.
To highlight the word under cursor permanently there's a function symbol-overlay-put. To unhighlight call it once again.
In my config example it's bound to Logo+` key.
(require 'symbol-overlay)
(defun enable-symbol-overlay-mode ()
(unless (or (minibufferp)
(derived-mode-p 'magit-mode)
(derived-mode-p 'xref--xref-buffer-mode))
(symbol-overlay-mode t)))
(define-global-minor-mode global-symbol-overlay-mode ;; name of the new global mode
symbol-overlay-mode ;; name of the minor mode
enable-symbol-overlay-mode)
(global-symbol-overlay-mode) ;; enable it
(global-set-key (kbd "s-`") 'symbol-overlay-put)
(setq symbol-overlay-ignore-functions nil) ;; don't ignore keywords in various languages
(setq symbol-overlay-map (make-sparse-keymap)) ;; disable special cmds on overlays
This may not be as nice as what you were hoping but if you put
(global-hi-lock-mode 1)
in your .emacs file then you can type C-x w h REGEX <RET> <RET> to highlight all occurances of REGEX, and C-x w r REGEX <RET> to unhighlight them again. Again, not as elegant as you'd probably like, but it'll work.
Try http://www.emacswiki.org/emacs/msearch.el
All occurences of the text selected with the cursor are highlighted.
You have to drag over the string which you want to highlight. That enables you to easily change the selection without changing the highlight.
If you want to preserve the highlighting of a string you can freeze it.
You can enslave a buffer to another buffer. Text selected in the master buffer will also be highlighted in the slave buffer. That is useful for comparing buffers.
It is also useful for taking notes in one buffer while you investigate the text in another one. You can have a collection of keywords in the notes buffer. Drag over such a keyword and its occurences in the investigated text will be highlighted.
I am using this stuff for years now. I added the freezing quite recently. So, maybe something is broken. If this is the case leave me a note on http://www.emacswiki.org/emacs/msearch or here.
Check Interactive Highlighting
Should be:
C-x w h word <RET> <RET>
Try iedit. It highlights the word at point and lets you edit all occurrences of it easily. With an additional keystroke (C-'), it hides all the lines without that word in it. Very handy!
Commands in library highlight.el
let you (un)highlight text matching a regexp (in this case a symbol), using overlays or text properties. You can cycle among the occurrences. Highlighting can be temporary or persistent. (more info).
This maybe won't highlight but will search for a word without you needing to type it...
when you've reached the word you wanted to search, C-S, then read the full word with C-W then you can C-S and it will search for it. In my Emacs it also highlights all instances in the document.
This package available in Melpa works, you can customize the highlight style as well.
https://github.com/ignacy/idle-highlight-in-visible-buffers-mode