Before importing my Maven project, I build it using the following: mvn clean install
I then create the necessary Eclipse files as follows: mvn -Dwtpversion=2.0 eclipse:eclipse
I notice that my Referenced Libraries in Eclipse contains this jar: validation-api-1.0.0.GA.jar
However, when I view the effective POM in Eclipse no such jar appears. Therefore, I am wondering how this jar gets added to my Eclipse classpath?
I require this jar for #Valid annotation I am using and I need Maven to be aware of it. If I build my classpath files using Maven then how come Maven is not aware of it?
Thanks
Check the Dependency hierarchy-tab in your pom (in Eclipse), maybe the jar is a dependency of some other jar you use.
In this case, the reference was in the project's Java Build Path, and was probably added when the project was created because of the -Dwtpversion=2.0 -parameter.
Maven also adds to your class path the sub-dependencies of your main dependencies (which are those specifically declared by you in the pom.xml). Do a
mvn dependency:tree -Dverbose
To see what other dependencies are pulled in with a specific pom-declared dependency.
Also, if you only wanna see the subdependencies of a certain dependency, called x.y.z you can do:
mvn dependency:tree -Dverbose -Dincludes=x.y.z
(where x.y is the groupId and z is the artefactId)
One of your project dependencies probably has a dependency for this jar file. Check the graphical dependency graph or just search for that, find out your project dependency that is dependent on this and exclude this dependency, if possible, by using maven's 'exclude' tags.
You can use maven dependency exclusions, as below:
<project>
...
<dependencies>
<dependency>
<groupId>sample.ProjectA</groupId>
<artifactId>Project-A</artifactId>
<version>1.0</version>
<scope>compile</scope>
<exclusions>
<exclusion> <!-- declare the exclusion here -->
<groupId>sample.ProjectB</groupId>
<artifactId>Project-B</artifactId>
</exclusion>
</exclusions>
</dependency>
</dependencies>
</project>
Source: Maven - Dependency Exclusions
I have encountered the same problem. And after some research I realized that transitive dependencies of your parent pom may not show up in Effective POM, but would be present in Reference libraries.
The whole confusion raised because when I ran the following command
mvn dependency:tree -Dincludes=X (where X is the group-id of the jar I was looking for)
It did no mention of parent pom, instead it referred to dependency in parent pom which brings X to the table. (Which make sense because we inherit from parent pom).
Related
Maven compilation failes even after adding the external jars to eclipse. My Eclipse codes are okay with external jars, however when I compile Maven complains package blah blah not found, and I have almost 50 external packages.
I will use the mvn dependency to add the jars later.
However It should work, but not luck.
Any troubleshooting/suggestion please.
I think you can not get away with Maven Project without having <dependencies> tag in your pom.xml (Whether you run it from eclipse or from command-line) . That too for the project which is dependent on classes that are coming from 50 external jars.
If you don't want maven to look for these jars, you have to add below entry in pom.xml with system scope:
<dependencies>
<dependency>
<groupId>selenium-server-standalone</groupId>
<artifactId>selenium-server-standalone</artifactId>
<version>2.46.0</version>
<scope>system</scope>
<systemPath>${project.basedir}/lib/selenium-server-standalone-2.46.0.jar</systemPath>
</dependency>
</dependencies>
With this, groupID & artifactID are meaningless. You can write such 50 <dependency> tags for referring your 50 external jars.
I’m using STS 2.9.1 (build on Eclipse 3.7.2) with m2e plugin bundled with STS (v1.0.200.20111228-1245).
I have a problem regarding missing dependencies in Eclipse project that contains several modules, or maybe I don’t fully understand how it should work.
It’s a maven project.
In my Project > Properties > Java Build Path > Libraries I have “Maven Dependencies” library, but it's empty (and that’s the problem).
The main POM doesn’t have any dependencies, but it has several modules declared in it.
Adding a dependency to module’s POM doesn’t add it to the “Maven Dependencies” library (what was my expectation) and leads to Eclipse showing errors in source files.
Adding a dependency to the main POM adds it to the “MD” lib, but of course I don’t want to add all of my modules’ dependencies to the main POM just to have it in “MD” lib and adding every single dependency to the Build Path doesn’t seem right nor practical.
I’ve tried:
Project > Clean,
Maven > Update dependencies,
Maven > Update project configuration,
Unchecking the checkbox: Project > Properties > Maven > Resolve dependencies from Workspace projects.
None of the above seems to do the trick.
Example:
Simplified project structure:
simple.project
...
sample-module
...
pom.xml
pom.xml
simple.project/pom.xml:
<project ...>
<modelVersion>4.0.0</modelVersion>
<groupId>test</groupId>
<artifactId>simple.project</artifactId>
<version>0.0.1-SNAPSHOT</version>
<packaging>pom</packaging>
<modules>
<module>sample-module</module>
</modules>
<dependencies>
<dependency><!-- This dependency is present in "MD" lib. -->
<groupId>javax.servlet</groupId>
<artifactId>servlet-api</artifactId>
<version>2.5</version>
<scope>provided</scope>
</dependency>
</dependencies>
</project>
simple.project/sample-module/pom.xml:
<project ...>
<modelVersion>4.0.0</modelVersion>
<parent>
<artifactId>simple.project</artifactId>
<groupId>test</groupId>
<version>0.0.1-SNAPSHOT</version>
</parent>
<groupId>test</groupId>
<artifactId>sample-module</artifactId>
<version>0.0.1-SNAPSHOT</version>
<dependencies>
<dependency><!-- I've expected this dependency also to appear in "MD" lib. -->
<groupId>junit</groupId>
<artifactId>junit</artifactId>
<version>3.8.1</version>
<scope>test</scope>
</dependency>
</dependencies>
</project>
It is not supposed to work. A project only imports a dependency from another one if it depends on that project (using dependency) or if it inherits from it (using parent). The module element only represents an aggregation.
The question is from time ago, but I solved this creating a Maven Project and adding Maven Modules: right click on project and "New > Project... > Maven > Maven Module".
After that, no more errors were shown in code.
First thing that I see is that you're defining dependencies in a pom parent. There I would expect to see a <dependencyManagement> (see here the doc) structure. In this way the submodules will inherit properly those common dependencies.
Aside from that lets start for the most simple test. Try to compile your project from the maven utility in the command line. If it works then you have a problem in your Eclipse configuration, otherwise the problem is in the way you have defined your project.
If your project compiles properly from the command line, lets see what else can be happening.
The fact that the Maven Dependencies Library is empty means that the Eclipse Maven plugin is not resolving properly your poms. I had quite bad experiences with the embedded STS maven plugin. Try to downgrade it to the m2e 0.10 version. You only need to open the STS DashBoard / Find Updates / Install m2e 0.10
I hope some of these tips can help you.
I have just added dependencies to an eclipse project so that my jar can see other jars. How can I be sure that the dependencies work, and that what I've done is correct? I view a pom.xml file that has been created so what are the target folder and classes,test-classes subfolders used for? Thanks
If you have the m2eclipse plugin installed you can open your pom in Eclipse and click on the Dependency Hierarchy tab to view your resolved dependencies. You should manage all dependencies through Maven with the setup you are describing.
If you want to check command line you may want to look at using Effective Pom.
If you use m2e, it adds Maven Dependencies pseudo library to your project.
You may expand it and see if the dependent jar file is in there.
If it is, Eclipse ( or more precisely m2e ) has resolved the dependency correctly and it's available for you project build.
If you added your dependencies correctly your application should build and execute correctly, or am I missing something? Dependencies should be added to a POM section that looks like this example:
<dependencies>
<dependency>
<groupId>annogen</groupId>
<artifactId>annogen</artifactId>
<version>0.1.0</version>
</dependency>
<!-- other dependencies here -->
</dependencies>
Maven and the m2e/m2eclipse plugin rely on source files to be conventionally placed in src/main/java for application code and src/test/java for test code. Application code is compiled to target/classes and test code is compiled to target/test-classes. If you plan to use Maven and/or m2e/m2eclipse, do read about it. Maven: The Complete Reference is a good starting point.
I have a Eclipse project where Maven manages the dependencies. I have also few jar files that are not Maven enable and I locate them at src/main/webapp/WEB-INF/lib. I have no issue to build/run the project in Eclipse. I have no issue also to run "mvn:package" after I built the project in Eclipse. However, after I invoke "mvn:clean", if I run "mvn:package", I will get compilation error as it can't find dependency jar files under src/main/webapp/WEB-INF/lib. What I need to do is to rebuild the Eclipse project then "mvn:package". Therefore, I can't invoke "mvn:package" outside Eclipse IDE.
How to resolve this?
Thanks.
You have to put the not "Maven enabled artifacts" to an appropriate Maven Repository (Nexus, Artifactory what ever) and than change your project to use the dependencies appropriately. Furthermore either you do Maven or not but nothing in between. Maven is a build tool and not only for dependency management. After those changes working with Eclipse will work fine (if you use M2Eclipse). If you correctly use Maven you can do both things via Eclipse or call mvn package on command line.
If you can not set up a recommended environment (maven repository) you can add the dependencies as System dependencies to your pom.xml.
<project>
...
<dependencies>
<dependency>
<groupId>foo</groupId>
<artifactId>bar</artifactId>
<version>1.2.3</version>
<scope>system</scope>
<systemPath>${basedir}/src/main/webapp/WEB-INF/lib/foobar.jar</systemPath>
</dependency>
</dependencies>
...
</project>
I've created a Maven project and added the dependencies (jar files) that I need; however, netbeans says that it still cannot find it.
Specifically in my case, I added the jmf-2.1.1e.jar file into my dependencies folder. When I go back to my program it still gives me the compile error that it cannot find the javax.media package.
Did you let Netbeans manage the dependency?
In your "Projects" listing, find and context+click on the "Dependencies" folder in the list. From the context menu, choose "Add Dependency".
This approach works at least in NetBeans 7.4 and 8.0 beta.
Make sure that your pom.xml has the following snippet that defines the dependency
<dependencies>
<dependency>
<groupId>javax.media</groupId>
<artifactId>jmf</artifactId>
<version>2.1.1e</version>
</dependency>
</dependencies>
The dependency is available in Maven Central. Add the pom snippet manually to the pom.xml and run Maven in the shell and let it download the dependency. This should resolve your issue.
Maven automatically downloads the dependency once specified in the pom.xml. For this you would have to build your project with the dependency as specified by Tim Sparg.