I have an existing repo which has been setup correctly and working fine. I deleted an entire project folder from the repo, committed the change, then added another version of the same folder which was not under VC. Now when I try to add or commit files in the new folder, Mercurial does not seem to recognize any of the new files.
Using the TortoiseHg Windows Explorer "commit" extension, when I try to the commit the folder(or any of the files within), no files show up in the dialogue. If I right click and commit a file within the folder, a pop up comes up that says "No files found for this operation". I am no Hg expert, although I have been using it for few months without a hitch, but I am pretty stuck on this one. Any ideas?
UPDATE: I have added a screenshot below showing what happens when I try to add the new folder. None of the files in the folder seem to be recognized.
The project I had copied had been a part of another repo, so it contained hg reference files. I deleted these, and everything added/committed perfectly.
If you want to commit a new file to a repository, you must first add it.
On the command line this can be done in various ways :
hg add which can add a file or a repository and every files it contains.
hg addremove which adds all new files and remove deleted ones.
hg commit -A or hg commit --addremove which are the same thing and a shortcut of hg add remove; hg commit.
I don't remember exactly where the command is in TortoiseHG, but I think if you right-click on the folder in the explorer, the option should be present.
I think I also remember an addremove option somewhere in the commit window, but I may be mistaken.
[UPDATE]
Based on the answer you provided yourself, here is the explanation of why simply adding the files weren't working :
Since the new directory contained repository related information (a .hg directory), Mercurial was treating it as a Subrepository. Subrepositories are repository contained in another, this can, for example, be used to reference a specific version of a library.
Once you delete the .hg directory in your new location, Mercurial didn's saw this as a Subrepo anymore and you were able to add the files normally.
Related
Trying to do something similar to here: Applying .gitignore to committed files
Where you apply the new hgignore file to the already committed files.
I have node_modules folder already committed with thousands of files and I'd like to remove it by using the new hgignore file.
I can't find anything online for it to work on a Mercurial repo, any ideas? Thanks!
Edit .hgignore to match files you want to ignore
hg forget "set:hgignore()" and commit
See in action:
https://asciinema.org/a/kuJERsouDkOUBspADjDM5pMRQ
See also:
hg remove all files listed in .hgignore
How to check which files are being ignored because of .hgignore?
This is very easy once you get the steps. hgignore does not apply to the files already committed for tracking.
I use Tortoise Hg Workbench for UI.
In case build related binary files are checked in that need not be tracked, try this. When a rebuild is done, those files will again appear under files to commit. You can see this by selecting the green Commit button in the toolbar.
Select the files you want to ignore, then right click and select "Forget" (remember you have already committed the file earlier). This would mark the files as "R" for removal. Select the checkboxes next to the file and commit.
After commit, there would be a “?” mark next to those files and will appear in pink. Select those files and right click and select "Ignore". This would bring up the hgignore editor. Add to .hgignore from that editor.
Commit the .hgignore as well so that you have it safe.
In case you are using this for your personal work, why dont you try VSTS, its really cool, has both git and TFS as the backhaul! I moved all my personal work to VSTS.
Note: Sorry for not being able to upload screen shots, absolutely tight on schedule.. :(
Decided to take the jump from CVS to SVN.
I setup a new repository in subclipse for my project. When I go to 'Finish' the setup it wants to do an initial commit and presents me with a flat list of files to select the files for version controlling.
The problem is I have thousands of generated binary files I dont want to commit.
So I click on cancel because it would take me all day to go through and unselect all the unwanted files. Annoyingly when I click on a parent category for the files I want to ignore it is not recursive!
So I click cancel then go to the eclipse directory structure for the project and manually set svn:ignore on all directories I want to ignore. Then I try and do a commit again and all the files are once again presented - ignore seems to have done nothing.
Can anybody point out what I might be doing wrong?
For the first commit, I recommend writing a small script to delete (of course you'll have a backup) all the files that are not meant to be committed.
Afterwards, if you find you accidentally committed a file, you can
svn delete file
Upon the first checkout, copy back (or better yet, regenerate) all the binary files. This will trigger svn to notice that your local repository is out-of-sync with the remote repository.
cd <Root of local repository>
svn status
You will see lots of "to be added" items. Go to the parent directory and add in svn:ignore properties for each of the generated items.
cd build
svn propedit svn:ignore .
which will open an editor (if it doesn't, you need to set the environmental variable SVN_EDITOR to a suitable editor). Then you can add in entries that svn will know are not tracked.
(in the ignore property editor)
target
build
image*
*.o
(and so on)
Save the file, and it will be staged for the next commit. Subsequent runs of svn status will no longer show these files as "needing to be added", but they will show the directory as "needing to be committed (it's a revision on the directory)"
Quick Aside
So I'm not entirely certain exactly which functionality of Subclipse you were using in order to create a repo and share a project to it, I'm assuming you created like a file based repo through the eclipse SVN repo view and tried to share and then commit to it. It looks like your problem got solved but I did want to add an answer on here because I ran across this post looking for the answer to this same problem of handling initial commits even just in general with SVN and wanted to offer help to anyone else looking for the help.
Intro
To start off I would recommend not working through an IDE extension like this just for the initial commit as they can miss a lot of the options for handling opening a repo in SVN. I personally really like the command line form of SVN to work with but TortoiseSVN is a good option for a GUI.
Whether you create a local file-based repo or are connecting to an SVN server and you want better control over your first commit in an previously unversioned project here is what I've found as the best general workflow for doing so.
Create the remote folder to save to.
On command line this will be:
$> svn mkdir your-url-scheme://your-site-address.domain/path/to/repo/example-directory
Or on TortoiseSVN open your repo for browsing, right click, and select "create new folder"
This will give you a location in the SVN repo to checkout from for our next step.
Checkout in to the already started project
Make sure to use the empty, newly created folder in your repo to checkout with. SVN does not actually require a folder being checked out to to be empty, which is an important part of what makes it actually very flexible and able to subsume parts of your directory into it fairly easily if used correctly.
Now you will checkout this empty folder into the root folder of your already started project. This will add your project to the working copy of this folder without any commit being made yet. The command is:
$> svn co your-url-scheme://your-site-address.domain/path/to/repo/example-directory /your/projects/root/
"co" standing for checkout. In Tortoise svn you can right click on or in the empty repo folder and select "checkout..." and then select the project root.
Set ignores and commit
Finally, you can easily set your ignores on certain files before adding any other files to the tree using the command:
$> svn propset svn:ignore file-or-directory-to-ignore
And to add all non-ignored directories and files:
$> svn add * --force
The force is technically unnecessary in this case but ensures full recursion. You can also now do all of this in your file explorer if using TortoiseSVN or you can even use your IDE extensions to do this at this point(make sure to ignore all files you need to before mass-adding files for commit), all that's left is to make sure to commit the newly added files to the repo and you're up and running with source control :)
Added this method here simply because this method allows you to avoid any unnecessary copying of those stinky binaries that no one wants to lug around with them.
I´m using Github in Eclipse, and commiting my changes to it. I have added some files to my project, and I have clicked on Team->"Add to index" in each of them, for them to be commited when I make a commit of the whole project. However, these files are not added to be commited, and when I click in "Commit", they arent´shown in the list of modified files. How can I force them to be commited?
Thanks.
It sounds like you may be confusing the usage of Git wit SVN. In SVN when you add a file to be tracked, updates to the file will always be committed automatically.
In Git, when you add a file to the index, only the current version of that file is recorded. If you subsequently update the file and commit, the new updates won't be included. The solution is to do an "Add to index" on the root of your project right before you commit: the equivalent of git add . on the commandline. Make sure your .gitignore is set up correctly so you don't commit things you don't intend to.
An equivalent action is to do a git commit -a, which automatically adds all files previously in the index and updates any deleted files as well. I believe the equivalent setting in Eclipse (for eGit) would be to Include selected untracked files as in the commit settings below.
I'm using EGit with Eclipse Juno.
I worked with a local repository and the world was good.
Even adding a GitHub repository seemed to be fine. I added it to my local repository under "Remotes", so I can easily push commits to github.
But after a while, I noticed that no new files are added to the repository, even if I'm commiting changes.
They just are not under version control. They have no symbol, which should mean they are ignored.
This is my .ignore
.gwt
gwt-unitC
ache
Versandanzeige_Web_proto.war
Versandanzeige_Web.war
war/ajax
war/WEB-INF/classes
war/WEB-INF/deploy
www-test
The files are in src, so not even close.
The new files don't appear in the Commit-Dialog, even when checking "show untracked files". They don't appear in the Staging-Window.
RK -> Team -> "Add to index" doesn't help.
The files have the same right and are owned by the same user
They definetly dont show up at github
Any ideas how to fix that? Any additional information needed?
Update:
There are no errors in the error log.
I do have (HEAD) next to my newest branch.
More details:
I got my trunk T, beginning at T0. At T1, there is a branch A, which has changes to T1.
At T2, there is another branch, B. It has no changes to T2.
The strange thing: it is not indicated in History view. The master branch is also missing.
I can still switch to them. When I do git reflog, there are no entries before or including T2, just everything afterwards.
I removed the branches without commits:
The new files are still shown as ignored:
Output from command line:
$ git branch -a:
* master
maven
$ git status
# On branch master nothing to commit (working directory clean)
About the detached HEAD proposel: I didn't do what is described in the article, checking out an old state and work from that. And I can't see any undone commits.
Sorry for my bad english, I didn't use it for a while. Please ask for clarification, if I write something hard to understand.
Update:
I could add a file in another folder (/Versandanzeige_Web/war/WEB-INF/lib/gwt-servlet.jar).
Alright, I found the error.
For some reason I don't really know, there was another .gitignore file ABOVE my Project folder (in repository folder), where my COMPLETE project folder was included. I really don't know how that happened. Of course, this file didn't show up in Eclipse.
I tried to add the files on the command line, but gut the error message "File is in .gitignore file".
After deleting that file, it worked find.
Sorry for the trouble.
Sometimes EGit does not work properly and add to index does not work. In that kind of situations you can go to the root folder of your project (where .git folder is placed) with a file explorer, right click on an empty area inside the folder, select "git bash". This will open the git console for you. Now type "git add path_to_file". This will add the file to the git system for indexing. Now go and refresh your project in eclipse and you will see it is added to the index. This can be used wile resolving conflicts inside eclipse because adding to the index indicates "mark as merged" to the git system by re-adding the merged file.
Also sometimes the "Remove from index" does not work in eclipse, you can do the same thing in that kind of situation: this time write "git remove --cached -f path_to_file". Here do not forget to add "--cached" because otherwise your file will be deleted. -f stands for "force" to force the command. For any folder (directory) to remove from index type "git remove --cached -r -f path_to_folder".
I work on Java project. How I can push only source directory without temporary files, build files and project files? I use Mercurial.
Mercurial will only push history, which means that it is only things that you have asked it to track (with hg add) and later committed (with hg commit) that will be pushed.
So like Jim says, you should setup .hgignore file. Do this before adding files to your project and double-check that hg status only lists files you want to add. Then run hg add to add them all.
If you've already put the temporary files and build artifacts under version control, then you can either use hg forget to stop tracking them. You'll still carry them around in the history, so if we've talking about tens of megabytes, then you probably want to re-create the repository.
Create an .hgignore file.