When I add a link within an org-mode heading, is it possible have the link color match the rest of the text in the heading?
You can make the color of org links always match the text in which they are found, but you can't do that conditionally based on whether they are within headings. If that's good enough for your needs, try:
M-x customize-face RET org-link RET
then remove the 'foreground' specification for the face.
Related
My standard font is a proportional one. When I edit markdown files I would like to have all sections that are indented by 4 or more spaces be shown in a monospaced font.
I do not use any special markdown mode. Therefore I would be ok if I had to to switch that behavior manually on for the current buffer. Although, my own mode for *.md-files would be need of course, but I have no idea how to do that (and is beyond the scope if this question).
The modes that are active for me are:
Enabled minor modes: Abbrev Auto-Composition
Auto-Compression Auto-Encryption Blink-Cursor
Column-Highlight Column-Number Desktop-Save File-Name-Shadow
Flyspell Font-Lock Global-Font-Lock Icomplete Line-Number
Menu-Bar Mouse-Wheel Shell-Dirtrack Show-Paren
Tooltip Transient-Mark
Yes, you do need a mode that highlights markdown code. (Try M-x package-install RET markdown-mode+ RET) If you have font-locking enabled (I suspect you have), the mode that you end up probably gives syntax highlighting for markdown.
Now, syntax highlighting is just alterations to font and color used. Once you have it on, you can customize the font face used for code by navigating over a code block and issuing M-x customize-face. My markdown mode has code blocks under markdown-pre-face; the face under cursor will be selected by default for you.
I prepared some screenshots to show the workflow. Determining what emacs allows for font family or foundry is bit of a dark magic, and I leave it to google to find out more about it. On linux systems there used to be an ugly little helper called xfontsel where you can preview different font families and foundries.
You can experiment without saving anything first by applying the changes without saving; when things look fine, you can "apply and save" in the customize mode.
I'm going to partially disagree with the argument that you can do what you are after. You can only partially do what you are after and it is a bit of a hack.
Basically, you can set different fonts for different faces. So, provided the text you want to display in a fixed width font has a different face definition, then you can change the font from a proportional font to a fixed width font. At least, that is the theory.
Unfortunately, the results tend to be less than you would hope.
The problem is that most modes do not define faces for all possible characters. Faces tend to only be used to make something stand out and that tends to mean something which is special in the mode - a heading, a bit of syntax etc.
The problem will be witht he 'default face - the face used when no other face is specified. The default face is not mode specific. If you set default face to a monospace font, that font will be used in all modes, not just in 'plain' characters within markdown mode. If any of your fonts in markdown mode are proportional, you will find that alignment in indentation will not look consistent. Depending on how you structure your buffer contents, this may or may not be an issue.
Personally, I gave up on using a proportioanl font as the default font under emacs a long time ago and have settled instead on using a fixed width font as the default and then defining proportional fonts for some speial purposes, such as org-mode headers.
some things you could try which might work, would be
File local variables for setting fonts just in markdown filtes. I've not tried this, but you may be able to use file local variables. You would probably want to create a markdown template which sets this up in new markdown filtes.
Make the face variables buffer local. You might be able to define a markdown-mode hook function which makes the face variables buffer local and sets them to a fixed width font.
Face definitions can use inheritance, so theoretically, if all the faces used inherit from default face and you do a file local variable or buffer local variable to set the default face, then all other faces should inherit that definition, so you shouldn't have to do it for every font in the buffer.
I'd like highlighting of the matching HTML tag when the cursor is on the specific tag.
I'm looking for something like highlight matching parentheses in options menu.
I've checked the question How can I highlight unmatched HTML tags in Emacs? which is close to what I search but I want highlight of all the matching tags (where the cursor is), not only the errors.
web-mode provides this. You can enable with web-mode-toggle-current-element-highlight
web-mode provides this. You can enable with web-mode-toggle-current-element-highlight
You can add (setq web-mode-enable-current-element-highlight t)
into your web-mode-hook to make this behavior persistent.
In text, can I make org-mode ignore forward slashes somehow? Phonetics uses /s/ to denote a certain level of analysis.
I assume that you do not want the text to appear emphasized in the buffer, nor in the output. This is a slightly more complex answer which will achieve that result:
There is a variable defined by Org-mode called org-emphasis-alist which defines the different emphasis modes, what their plain-text syntaxes are, and how they are exported to HTML. You can achieve the result you want by changing the value of this variable before Org-mode has been loaded. That last part is critical so note it well—Org-mode reads the value of org-emphasis-alist when it is loaded and uses that value to generate a regular expression for highlighting ("font-lock") purposes.
Here are two routes to that:
Add the following lines to your .emacs file above the lines that load Org-mode:
(setq org-emphasis-alist
`(("*" bold "<b>" "</b>")
;; ("/" italic "<i>" "</i>")
("_" underline "<span style=\"text-decoration:underline;\">" "</span>")
("=" org-code "<code>" "</code>" verbatim)
("~" org-verbatim "<code>" "</code>" verbatim)
("+" ,(if (featurep 'xemacs) 'org-table '(:strike-through t))
"<del>" "</del>")))
(Notice the commented out line.)
Make the change through Emacs' customization facility:
M-x customize RET
In the search box enter Org Emphasis and click Search.
Click the down arrow next to Org Emphasis Alist to reveal its value.
Find and click the second DEL button—corresponding to the italic list item.
Click the Save for future sessions button at the top of the buffer.
You can use
#+OPTIONS: *:nil
to turn off text-emphasis (bold,italics,underline). This will however only work on export itself, the emphasis will still be visible.
See the manual for other export options.
If you like the standard emphasis functionality of the forward slashes in org-mode, you could also just define a new environment. I put something like the following in the preamble whenever I do phonetics/phonology typesetting:
\newcommand\uRep[1]{$/$\textipa{#1}$/$}
Is it possible to select a piece of text you're editing and change its color? I know it's possible to create a color theme that will color certain kinds of text (like for example coloring functions in a certain programming language), but is it possible to do a one time color change to a selected piece of text in a specific emacs document without creating a theme? thanks in advance.
A theme doesn't allow you to specify the color of arbitrary text in any case. It only describes a set of face to be used by font-lock.
To apply a face to an arbitrary piece of text, select the text, then M-: (add-text-properties (region-beginning) (region-end) '(face font-lock-warning-face))
See the faces section of the elisp manual on how to create a face.
Emacs also comes with the hi-lock package, which can highlight regexps or lines containing regexps. See manual
how about M-x highlight-phrase ?
I know six years is a pretty long time, but I stumbled across this question and, after a lot of research, I did not find anything nearly as objective as what I eventually dug out for myself.
To color say, the first 200 characters in your buffer, execute the command:
(put-text-property 1 200 'face (cons 'foreground-color "red"))
If you need help executing this command in emacs, here is one possibility among many:
Type ESC-x eval-expression.
Type or paste the above command in the mini-buffer after the prompt.
Press ENTER.
You might like to look at enriched-mode.
If you are in a buffer that isn't controlled by font-lock, you can use 'facemenu'.
For example, highlight a bit of text, then with the mouse, press C-mouse-2. You can then select a face (some combination of text properties with a name). You can also pick random forground or background colors.
If you Emacs is particularly old, I seem to remember something similar on M-g.
Try set-background-color, set-foreground-color, set-cursor-color.
Changes won't be saved with the document though.
Note:
When I try those functions, they don't set the region's color unless I go through the menus.
See http://www.emacswiki.org/emacs/HighlightTemporarily (and it need not be temporary).
You can "color" text by swiping it with the mouse, or matching it with a regexp, and several other ways. Library highlight.el, in particular, lets you "color" text in many ways.
I'm writing a mode which is actually a glorified markdown reader. It's a read-only mode however, and though I'd like to change the faces for bold, italics, and links, I'd love to remove the decorations surrounding those faces. However, when I do so, I lose the fontification. Is there anyway to modify fontified-text to something that no longer matches any of the syntax regexes and still keep the fontification?
Org-mode does this for its link markup. I'm not a mode writer (yet), but Org-mode would be the first place I'd look for code that demonstrates how to do this. Oddly, it doesn't do it for any of its fontification: italic, bold, and underline all retain their markup.
Specifically, the code to hide the link markup is on line 4612 of org.el in version 7.01 of org-mode:
(if org-descriptive-links (add-to-invisibility-spec '(org-link)))
where add-to-invisibility-spec is actually supplied by a built in elisp file subr.el, and allows specific types of markup to be hidden. That would be the approach I would take, especially if the buffer is read-only.