Can I do this:
With ZipCodeCTE as
{
select nvl(HH.GeoUSZip5 , **ZipCodeKeyLookUp**(HH.[CityName],HH.[StateName])) as TotalZipCode
from ODSDataArchive.archive.HHJob_Data_201202 HH
}
/* This Is a SELECT INTO statement that inserts
data into [Jobs].[dbo].[FactRPP]*/
SELECT [dbo].[FactJobsDaily].jobdid,
[dbo].[FactJobsDaily].DateKey,
[dbo].[FactJobsDaily].YearMonth,
[dbo].[FactJobsDaily].AccountKey,
[dbo].[FactJobsDaily].BridgeSocKey,
[dbo].[FactJobsDaily].HostSiteKey,
[dbo].[FactJobsDaily].JobClickedCount,
[dbo].[FactJobsDaily].JobResultsPageCount,
(select DZ.ZipCodeKey
from dimensions.dbo.DimZipCode DZ
where DZ.ZipCodeKey IN
(Select CAST(TotalZipCode AS INT)
from ZipCodeCTE))
INTO [Jobs].[dbo].[FactRPP]
from dbo.FactJobsDaily
inner join ODSDataArchive.archive.HHJob_Data_201202
on dbo.FactJobsDaily.JobDID = ODSDataArchive.archive.HHJob_Data_201202.DID
and dbo.FactJobsDaily.datekey = ODSDataArchive.archive.HHJob_Data_201202.datekey
inner join dimensions.dbo.Dimzipcode dzc
on ODSDataArchive.archive.HHJob_Data_201202.geoUSZip5 = dimensions.dbo.Dimzipcode.ZipCode
where [dbo].[FactJobsDaily].yearmonth= 201202
and [dbo].[FactJobsDaily].isactivekey = 1
-- and ODSDataArchive.archive.HHJob_Data_201202.geoUSZip5 <> ''
-- and ODSDataArchive.archive.HHJob_Data_201202.geoUSZip5 IS NOT NULL
and ODSDataArchive.archive.HHJob_Data_201202.status = 0
and ODSDataArchive.archive.HHJob_Data_201202.CountryName = 'US'
order by [dbo].[FactJobsDaily].jobdid;
Because the CTE translates into a regular query the short answer is yes.
Related
UPDATE ItemDim_DEV
set ActiveFlag = 0,
EndUTCDate = GETUTCDATE()
from (select i.SKU, i.itemname, i.category, i.CategoryInternalId, i.itemtype, i.IsActive, i.assetaccount, i.InternalId,
ni.sku,
ni.itemname,
ni.class_name,
ni.productclass,
ni.ItemType,
ni.isactive,
ni.assetaccount,
i.CalculatedHash, ni.hashid
from (
SELECT i.*
FROM itemDim_Dev i
WHERE i.SourceSystem = 'NetSuite'
--and InternalId = '1692'
) i
CROSS APPLY (
SELECT (CONVERT([binary](64),hashbytes('SHA2_512',
concat (ISNULL(im.TargetSKU, ni.sku), ni.itemname, pc.class_name, ni.productclass, ni.ItemType,
CAST(CASE WHEN ni.IsInactive = 'T' THEN 0 ELSE 1 END AS BIT ), ni.assetaccount)))) hashid,
ISNULL(im.TargetSKU, ni.sku) sku,
ni.itemname,
pc.class_name,
ni.productclass,
ni.ItemType,
CAST(CASE WHEN ni.IsInactive = 'T' THEN 0 ELSE 1 END AS BIT ) isactive, ni.assetaccount
FROM NetSuiteInventory ni
INNER JOIN Product_Class pc ON ni.productclass = pc.class_id
LEFT JOIN ItemMapping im ON ni.sku = im.SourceSKU
WHERE ni.ItemInternalId = CAST(i.InternalId as bigint)
and
(CONVERT([binary](64),hashbytes('SHA2_512',
concat (ISNULL(im.TargetSKU, ni.sku), ni.itemname, pc.class_name, ni.productclass, ni.ItemType,
CAST(CASE WHEN ni.IsInactive = 'T' THEN 0 ELSE 1 END AS BIT ), ni.assetaccount)))) = i.CalculatedHash
) ni
I understand that I can put a select after the from of the update but in the CROSS APPLY that is in the query starts with a select as in the second one, can you help me please.
Make a join to the target table
UPDATE A
SET XXX = YYY
FROM ItemDim_DEV A
JOIN (
--huge SELECT that I recommend you try to shorten in the next questions
CROSS APPLY (any secrets...)
) B ON A.PK = B.PK
How to insert data with select query sum? I tried. The result is affected success > Affected rows: 1. but row no add in the table.
CREATE TABLE Clases(Segment1_ID char(4), Segment1_Name varchar(75), CompanyID char(4), amount Float(53));
INSERT INTO Clases (Segment1_ID, Segment1_Name, CompanyID, amount)
select Segment1_ID, Segment1_Name, dataupload1h_companyid CompanyID, sum(case when Segment3_Formula = '+' then dataupload1d_amount else dataupload1d_amount * -1 end) Amount
from t_dataupload1_header
inner join t_dataupload1_detail
on dataupload1h_id = dataupload1d_id
inner join M_Account
on dataupload1d_accountid = Account_ID
and dataupload1h_companyid = Account_CompanyID
inner join M_Segment4
on Account_Segment4ID = Segment4_ID
and dataupload1h_companyid = Segment4_CompanyID
inner join M_Segment3
on Segment4_Segment3ID = Segment3_ID
and dataupload1h_companyid = Segment3_CompanyID
inner join M_Segment2
on Segment3_Segment2ID = Segment2_ID
and dataupload1h_companyid = Segment2_CompanyID
inner join M_Segment1
on Segment2_Segment1ID = Segment1_ID
and dataupload1h_companyid = Segment1_CompanyID
where dataupload1h_companyid = '1000'
group by Segment1_ID, Segment1_Name, dataupload1h_companyid
order by Segment1_ID, Segment1_Name, dataupload1h_companyid;
Please help. Thank you
If the select is returning the desired results then check whether Auto-commit is turned on in PgAdmin(I suppose you are using this) Or put COMMIT; after the insert.
i need to show some field from another table in oracle here is my query
SELECT
ANGGARAN.SIMPEG_PEGAWAI.ID_PEGAWAI AS KODE,
ANGGARAN.SIMPEG_PEGAWAI.NAMA,
ANGGARAN.SIMPEG_PEGAWAI.NIP,
ANGGARAN.SIMPEG_ESELON_JABATAN.JABATAN,
ANGGARAN.SIMPEG_KODE_GOLONGAN_PANGKAT.GOLONGAN,
ANGGARAN.SIMPEG_KODE_GOLONGAN_PANGKAT.PANGKAT,
(SELECT *
FROM (SELECT CONCAT(TO_CHAR(abs(sysdate - TO_DATE(TMT_JABATAN))/360,'9,999,999.9'),' TAHUN')
FROM SIMPEG_JABATAN where ID_PEGAWAI=KODE ORDER BY TMT_JABATAN desc)
WHERE ROWNUM = 1) AS MASA_KERJA
FROM
ANGGARAN.SIMPEG_PEGAWAI
INNER JOIN ANGGARAN.SIMPEG_ESELON_JABATAN
ON ANGGARAN.SIMPEG_PEGAWAI.ESELON_JABATAN = ANGGARAN.SIMPEG_ESELON_JABATAN.ID_ESELON_JABATAN
INNER JOIN ANGGARAN.SIMPEG_KODE_GOLONGAN_PANGKAT
ON ANGGARAN.SIMPEG_PEGAWAI.PANGKAT = ANGGARAN.SIMPEG_KODE_GOLONGAN_PANGKAT.ID_GOLONGAN_PANGKAT
WHERE
ANGGARAN.SIMPEG_PEGAWAI.ST_AKTIF = 1 AND
ANGGARAN.SIMPEG_PEGAWAI.ESELON2 <> 1 AND
ANGGARAN.SIMPEG_PEGAWAI.PANGKAT >= 12 AND
ANGGARAN.SIMPEG_ESELON_JABATAN.STATUS = 1 AND
ANGGARAN.SIMPEG_ESELON_JABATAN.ID_ESELON2=2
ORDER BY
ANGGARAN.SIMPEG_KODE_GOLONGAN_PANGKAT.SORT DESC
result i got
[Err] ORA-00904: "KODE": invalid identifier
the KODE come from query ANGGARAN.SIMPEG_PEGAWAI.ID_PEGAWAI AS KODE, and used for this query
(SELECT *
FROM (SELECT CONCAT(TO_CHAR(abs(sysdate - TO_DATE(TMT_JABATAN))/360,'9,999,999.9'),' TAHUN')
FROM SIMPEG_JABATAN where ID_PEGAWAI=KODE ORDER BY TMT_JABATAN desc)
WHERE ROWNUM = 1) AS MASA_KERJA
that i miss something ? or that could be worogn using an alias in subquery where clause in oracle database ?
You can use an identifier defined in an external query in only one level deep queries. You have to rethink your strategy. My suggestion is to remove the subquery from the select list and put it in the FROM clause. And add another rownumber column like this:
(SELECT
ID_PEGAWAI,
CONCAT(TO_CHAR(abs(sysdate - TO_DATE(TMT_JABATAN))/360,'9,999,999.9'),' TAHUN') MASA_KERJA,
ROW_NUMBER() OVER (PARTITION BY ID_PEGAWAI ORDER BY TMT_JABATAN DESC) rownumber
FROM SIMPEG_JABATAN) xxx
And join like:
ON ANGGARAN.SIMPEG_PEGAWAI = xxx.ID_PEGAWAI
Then in the where clause you can do simply:
WHERE
....
AND xxx.rownumber = 1
Complete query:
SELECT
ANGGARAN.SIMPEG_PEGAWAI.ID_PEGAWAI AS KODE,
ANGGARAN.SIMPEG_PEGAWAI.NAMA,
ANGGARAN.SIMPEG_PEGAWAI.NIP,
ANGGARAN.SIMPEG_ESELON_JABATAN.JABATAN,
ANGGARAN.SIMPEG_KODE_GOLONGAN_PANGKAT.GOLONGAN,
ANGGARAN.SIMPEG_KODE_GOLONGAN_PANGKAT.PANGKAT
FROM
ANGGARAN.SIMPEG_PEGAWAI
INNER JOIN ANGGARAN.SIMPEG_ESELON_JABATAN
ON ANGGARAN.SIMPEG_PEGAWAI.ESELON_JABATAN = ANGGARAN.SIMPEG_ESELON_JABATAN.ID_ESELON_JABATAN
INNER JOIN ANGGARAN.SIMPEG_KODE_GOLONGAN_PANGKAT
ON ANGGARAN.SIMPEG_PEGAWAI.PANGKAT = ANGGARAN.SIMPEG_KODE_GOLONGAN_PANGKAT.ID_GOLONGAN_PANGKAT
INNER JOIN (
SELECT
ID_PEGAWAI,
CONCAT(TO_CHAR(abs(sysdate - TO_DATE(TMT_JABATAN))/360,'9,999,999.9'),' TAHUN') MASA_KERJA,
ROW_NUMBER() OVER (PARTITION BY ID_PEGAWAI ORDER BY TMT_JABATAN DESC) rownumber
FROM SIMPEG_JABATAN
) xxx
ON ANGGARAN.SIMPEG_PEGAWAI.ID_PEGAWAI = xxx.ID_PEGAWAI
WHERE
ANGGARAN.SIMPEG_PEGAWAI.ST_AKTIF = 1 AND
ANGGARAN.SIMPEG_PEGAWAI.ESELON2 <> 1 AND
ANGGARAN.SIMPEG_PEGAWAI.PANGKAT >= 12 AND
ANGGARAN.SIMPEG_ESELON_JABATAN.STATUS = 1 AND
ANGGARAN.SIMPEG_ESELON_JABATAN.ID_ESELON2=2 AND
xxx.rownumber = 1
ORDER BY ANGGARAN.SIMPEG_KODE_GOLONGAN_PANGKAT.SORT DESC
Oracle does not support columns aliases in WHERE clauses (or similar situations like here). You have to name the column again (by its original name).
select dummy as kode from dual where kode = 'X'
> ORA-00904: "KODE": invalid identifier
You need to assign an alias in the level below to use it in a query (I haven't checked the syntax and workability of your query, just changed the part which is essential to answer your question):
SELECT
TMP.KODE,
TMP.NAMA,
TMP.NIP,
ANGGARAN.SIMPEG_ESELON_JABATAN.JABATAN,
ANGGARAN.SIMPEG_KODE_GOLONGAN_PANGKAT.GOLONGAN,
ANGGARAN.SIMPEG_KODE_GOLONGAN_PANGKAT.PANGKAT,
(SELECT *
FROM (SELECT CONCAT(TO_CHAR(abs(sysdate - TO_DATE(TMT_JABATAN))/360,'9,999,999.9'),' TAHUN')
FROM SIMPEG_JABATAN where ID_PEGAWAI=TMP.KODE ORDER BY TMT_JABATAN desc)
WHERE ROWNUM = 1) AS MASA_KERJA
FROM
(SELECT ANGGARAN.SIMPEG_PEGAWAI.ID_PEGAWAI AS KODE, ANGGARAN.SIMPEG_PEGAWAI.* FROM ANGGARAN.SIMPEG_PEGAWAI) TMP
INNER JOIN ANGGARAN.SIMPEG_ESELON_JABATAN
ON TMP.ESELON_JABATAN = ANGGARAN.SIMPEG_ESELON_JABATAN.ID_ESELON_JABATAN
INNER JOIN ANGGARAN.SIMPEG_KODE_GOLONGAN_PANGKAT
ON TMP.PANGKAT = ANGGARAN.SIMPEG_KODE_GOLONGAN_PANGKAT.ID_GOLONGAN_PANGKAT
WHERE
TMP.ST_AKTIF = 1 AND
TMP.ESELON2 <> 1 AND
TMP.PANGKAT >= 12 AND
ANGGARAN.SIMPEG_ESELON_JABATAN.STATUS = 1 AND
ANGGARAN.SIMPEG_ESELON_JABATAN.ID_ESELON2=2
ORDER BY
ANGGARAN.SIMPEG_KODE_GOLONGAN_PANGKAT.SORT DESC
I'm trying to select all records from a table "Table1" but I want a new column called "HasException" that contains a "0" or a "1". "HasException" must be "0" if the count of row matching the current Id from "Table2" is equal to 0, else it returns 1.
Here's what I've done so far, but it doesn't works:
SELECT *,
CONVERT(bit, (CASE WHEN (SELECT count(Id) FROM Table2 WHERE Table1.Id=Table2.Id) = 0 THEN 0 ELSE 1 END)) AS HasException
FROM Table1
You want to join the tables (and group on ID) before you can compare the two values like this:
SELECT dbo.Table_1.*,
CASE WHEN COUNT(dbo.Table_2.ID) = 0 THEN
0
ELSE
1
END
AS HasException
FROM dbo.Table_1 LEFT OUTER JOIN
dbo.Table_2 ON dbo.Table_1.ID = dbo.Table_2.ID
GROUP BY dbo.Table_1.ID
perhaps something like, assuming you meant table2?
SELECT *,
CAST(CASE WHEN COUNT(table2.id) = 0 THEN 0 ELSE 1 END AS bit) AS HasException
FROM
Table1
LEFT JOIN
Table2 ON Table1.Id=Table2.Id
GROUP BY
Table1.id
select
T1.*,
case when T2.Id is null then 0 else 1 end as HasException
from Table1 as T1
left outer join
(
select distinct Id
from Table2
) as T2
on T1.Id = T2.Id
I want to place this working code within a SQL Statement, OR do I need to perform a UDF.
The result set is a one line concatenation, and I want it to be place in every one of the overall result set lines.
----
MAIN QUERY
SELECT
H.CONNECTION_ID,
H.SEQUENTIAL_NO,
H.INVOICE_NUMBER,
H.INVOICE_DATE,
H.LAST_INVOICE_NUMBER,
H.LAST_INVOICE_DATE,
CAST(CASE
WHEN H.COLLECT_DEPOSIT = 1 THEN '-'
ELSE CAST(H.PAYMENT_DUE_DATE AS NVARCHAR(20))
END AS SMALLDATETIME) AS PAYMENT_DUE,
H.JOB_NUMBER,
H.CUST_JOB_NUMBER,
HDR.SALES_PERSON,
H.INSIDE_SALES_PERSON,
H.IS_LAST_INVOICE,
CASE
WHEN H.COLLECT_DEPOSIT = 1 THEN 'CASH'
ELSE H.PAYMENT_TERMS_DESCRIPTION
END AS PAYMENT_TERMS,
H.PRINTED,
H.NOTES,
CUR.ID,
CUR.CODE,
CASE CUR.CODE
WHEN 'USD' THEN '001-106624-211'
WHEN 'EUR' THEN '001-106624-101'
WHEN 'GBP' THEN '001-106624-100'
ELSE '001-106624-001'
END AS BANK_ACCT,
CUR.EXCHANGE_RATE,
H.BILL_CONTACT,
H.CUST_ACCOUNT,
H.CUST_NAME,
H.CUST_ADDR1,
H.CUST_ADDR2,
H.CUST_CITY,
H.CUST_STATE,
H.CUST_ZIP,
H.CONTACT_PHONE_NUMBER,
H.CONTACT_PHONE_NUMBER2,
H.ORDERED_BY_CONTACT,
H.SHIP_TO_NAME,
H.SHIP_TO_ADDR1,
H.SHIP_TO_ADDR2,
H.SHIP_TO_CITY,
H.SHIP_TO_STATE,
H.SHIP_TO_ZIP,
H.SITE_PHONE_NUMBER,
H.SITE_PHONE_NUMBER2,
H.OFFICE_NAME,
H.OFFICE_ADDR1,
H.OFFICE_ADDR2,
H.OFFICE_CITY,
H.OFFICE_STATE,
H.OFFICE_ZIP,
H.OFFICE_PHONE_NUMBER,
H.OFFICE_FAX_NUMBER,
H.DELIVERY_TICKET_NUMBER,
H.PO_NUMBER,
H.DUMMY_INVOICE_TEXT,
(SELECT MESSAGE FROM REPORT_MESSAGES WHERE CODE = 'INVOICE') ADVERT_MESSAGE,
(SELECT MAX(DISCOUNT_PERCENTAGE) FROM PRTINVITEM I2 WHERE I2.CONNECTION_ID = H.CONNECTION_ID AND I2.INVOICE_NUMBER = H.INVOICE_NUMBER) AS MAX_DISCOUNT,
I.ITEM,
I.DESCRIPTION,
I.QUANTITY,
I.UNIT_OF_MEASURE,
I.MINIMUM_CHARGE,
I.WEEKLY_CHARGE,
I.MONTHLY_CHARGE,
I.START_OF_BILLING_PERIOD,
I.END_OF_BILLING_PERIOD,
I.DAYS_USED,
I.WEEKS_USED,
I.DISCOUNT_PERCENTAGE,
I.TAX_CODE_FOR_ITEM,
I.INVENTORY_TYPE,
I.BILLING_LOGIC_TYPE,
I.ACTUAL_WEEKLY_CHARGE_USED,
I.DAYS_IN_ACTUAL_WEEKLY_CHARGE,
II.CHARGEABLE_DAYS,
II.CHARGEABLE_WEEKS,
II.CHARGEABLE_MONTHS,
II.FREE_DAYS_THIS_INVOICE,
CNV.TOTAL_NET_VALUE,
CNV.TOTAL_TAX_VALUE,
CNV.TOTAL_GROSS_VALUE,
CNV.TOTAL_GROSS_VALUE_NS,
CNV.NET_LINE_VALUE,
CMP.EMAIL_ADDRESS
FROM (PRTINVHDR H INNER JOIN PRTINVITEM I ON H.CONNECTION_ID = I.CONNECTION_ID AND H.INVOICE_NUMBER = I.INVOICE_NUMBER)
INNER JOIN INVOICEHDR HDR ON I.INVOICE_NUMBER = HDR.INVNO
INNER JOIN CUSTOMERS CST ON H.CUST_ACCOUNT = CST.CUSTNUM
INNER JOIN JOB JOB ON H.JOB_NUMBER = JOB.JOBNUM
INNER JOIN CURRENCY CUR ON HDR.CURRENCY_ID = CUR.ID
INNER JOIN VWCURRENCYCONVERSION CNV ON I.CONNECTION_ID = CNV.CONNECTION_ID AND I.INVC_UCOUNTER = CNV.INVC_UCOUNTER
INNER JOIN COMPANY CMP ON H.OFFICE_CODE = CMP.OFFICE
INNER JOIN INVOICEITEM II ON I.INVOICE_NUMBER = II.INVNO AND I.INVC_UCOUNTER = II.INVC_UCOUNTER
ORDER BY
H.SEQUENTIAL_NO,
I.PRINT_SEQUENCE
ASC
----
COALESCE QUERY
DECLARE
#DTICKET NVARCHAR(20),
#PUMPCATEGORYNAME NVARCHAR(3999)
SET #DTICKET = ''
SET #PUMPCATEGORYNAME = NULL
(SELECT
#DTICKET = DTICKET,
#PUMPCATEGORYNAME = COALESCE(#PUMPCATEGORYNAME + ', ', '' ) + PUMPCATEGORYNAME
FROM (SELECT
BHDR.DTICKET,
SCD.PUMPCATEGORYNAME
FROM PRTTICKHDR PHDR
INNER JOIN BIDHDR BHDR ON PHDR.DELIV_TICKET_NUMBER = BHDR.DTICKET
INNER JOIN PRTTICKITEM PITM ON PHDR.CONNECTION_ID = PITM.CONNECTION_ID AND PHDR.DELIV_TICKET_NUMBER = PITM.DELIV_TICKET_NUMBER
LEFT JOIN SUBCATEGORYDESCRIPTION SCD ON PITM.ITEM = SCD.PUMPCATEGORY
WHERE SCD.PUMPCATEGORYNAME IS NOT NULL)
SUBCATEGORYDESCRIPTION)
SELECT #DTICKET, #PUMPCATEGORYNAME
Not really sure what you are asking for but you can doing something along the lines of
Select col1 + ', ' + col2 + ', ' + col3 etc....