In the examples page when you search (CTRL+F) for image gallery and click the first image, there's this image gallery which you can browse with next/prev arrows. The animation between them is vertical -- the images fly vertically. How does one set them to fly horizontally?
In the help I found:
openMethod / closeMethod / nextMethod / prevMethod
Method from $.fancybox.transitions() that handles transition (you can
add custom effects there)
But I don't know where to go from here.
Also, this seems to be slightly related.
You can create your own custom transitions from here:
http://jsfiddle.net/xZBBS/
$(".fancybox-thumb").fancybox({
prevEffect : 'none',
nextEffect : 'none',
helpers : {
title : {
type: 'outside'
},
thumbs : {
width : 50,
height : 50
}
}
});
try this i am sure this will help
Related
I am referring to this https://ecomfe.github.io/echarts/doc/example/pie1.html#-en example. I am not able to hide the adjacent labels in the pie graph. I have encircled one of the labels I wish to hide in the attached image. Kindly help. Thanks!
Found the solution to my problem. I had to include the following code into the options and it worked:
itemStyle : {
normal : {
label : {
show : false
},
labelLine : {
show : false
}
}
}
I am new to javascript and jQuery and am trying to make a slideshow using Fancybox.
The problem is that I want the images to display on a box of the same size regardless of whether they are portrait or landscape images. My images are all either 700 X 525 for landscape or 525 X 700 for portrait.
The way I have it the landscape images load like it is showed on the top of the image below, the portrait images load as shown in the middle, and I want the portrait images to load as shown on the bottom, with the box with the same dimensions as if it were landscape:
I think what I should do is change the left padding depending on the image dimensions but I have no idea how.
Thank you for your help in advance.
I am using Fancybox version: 2.1.4 and I have set the defaults as such:
padding : 15,
margin : 20,
width : 800,
height : 600,
minWidth : 100,
minHeight : 100,
maxWidth : 9999,
maxHeight : 9999,
autoSize : true,
autoHeight : false,
autoWidth : false,
autoResize : true,
autoCenter : !isTouch,
fitToView : true,
aspectRatio : false,
topRatio : 0.5,
leftRatio : 0.5,
I know this post is 11 months old, but I thought I would share my solution in case it helps someone else out in the future.
Basically I have set a min-width css attribute onto the fancybox element and am comparing that against the current image width, if it is smaller I am adding padding to the fancybox element so that the fancybox element stays the same width but the image inside is horizontally centered.
Step 1: in your css set a min-width on the fancybox element. This is the width that you want your fancybox element to stay at regardless of image width.
.fancybox-wrap { min-width: 1120px; }
Step 2: add in the afterLoad function when you call fancybox
$(".fancybox").fancybox({
afterLoad: function(current) {
var $el = $(".fancybox-wrap").eq(0); // grab the main fancybox element
var getcurrwidth = current.width; // grab the currrent width of the element
var getdesiredwidth = $el.css('min-width'); // grab our min-width that we set from the css
var currwidth = Number(getcurrwidth);
var desiredwidth = Number(getdesiredwidth.replace('px', ''));
if (currwidth < desiredwidth)
{
var custompadding = (desiredwidth - currwidth) * 0.5; // if the width of the element is smaller than our desired width then set padding amount
this.skin.css({'padding-left': custompadding+'px', 'padding-right': custompadding+'px' }); // add equal padding to the fancybox skin element
}
}
});
I eventually want to create a photo gallery... clicking on a picture will launch a You Tube video. I am using fancybox 2.0.
I have the video opening up inline but I cannot control its dimensions. Could you please take a look at this page for me and see where I am fouling up.
http://www.bytebrothers.com/bb_tester/Video_lightbox_test.htm
Thank you,
darrell#bytebrothers.com
This is how your script looks like right now
$(document).ready(function() {
$('.fancyYouTube').fancybox({
width : 400,
height : 300,
autoSize : false,
type : 'swf'
})
and this is how it should look like
$(document).ready(function() {
$('.fancyYouTube').fancybox({
width : 400,
height : 300,
autoSize : false
});
});
you are missing some closing brackets.
On the other hand, if you are using fancybox-media, you don't need to specify type:'swf'
UPDATE: when targeting youtube videos in embed (youtube iframe mode) mode, add the class fancybox.iframe to your anchor so this
<a class="fancyYouTube" href="http://www.youtube.com/embed/dx6TZgUSquY">
should be this
<a class="fancyYouTube fancybox.iframe" href="http://www.youtube.com/embed/dx6TZgUSquY">
I'm using the following piece of code to display a set of bar charts in jqPlot. However, I am getting 2 problems:
There is no padding on either side of the range values for the xaxis. The pad attribute seems to have no effect.
When the number of bars is large, the bars overlap on top of each other. The barPadding attribute seems to have no effect.
I looked at this link Having problems with jqPlot bar chart . The answer suggested there was to use a CategoryAxisRenderer. But since I'm using time-series data, I require the DateAxisRenderer.
Please help.
function plotBarGraph(data,myticks,series)
{
$("#placeholder").empty();
$.jqplot('placeholder',data,
{
//stackSeries:true,
seriesDefaults:{
renderer:$.jqplot.BarRenderer,
barMargin:1,
barPadding:0.5
},
axes:
{
xaxis:
{
ticks:myticks,
tickInterval:10,
renderer:$.jqplot.DateAxisRenderer,
pad:2.5,
tickOptions:
{
formatString:'%d-%m-%y'
}
}
},
legend:
{
show:true,
labels:series
}
});
}
In this case if you do not want to use the approach mentioned in the link, you might want to play with min/max values for your date axis.
I think you might also find useful the approach to a similar sort of problem with padding where I chose to set ticks on creation and hide the unwanted ones after the plot is drawn.
Before I can be of any further assistance please provide a sample presenting your problem.
For your second problem, I ran into a similar issue. I set up a selection statement that widened the size of my chart depending on how many bars would be in it. I then made the parent div scrollable (called "dataHolder"), and that solved the problem.
// set div properties depending on how many sets of data are in the
//array so the view is sized properly
$("#chartDiv").html("").css("width", "750px"); // chartDiv's default settings
$("#tabs-6").removeClass("dataHolder").css("width", "900px"); // parent Div's default settings
if (dataArray.length > 10) {
$("#chartDiv").css("width", "1600px");
$("#tabs-6").addClass("dataHolder").css("width", "900px");
} else if (dataArray.length > 6) {
$("#chartDiv").css("width", "1200px");
$("#tabs-6").addClass("dataHolder").css("width", "900px");
}
I found a solution to use Date data with CategoryAxisRenderer. You have to configure de xaxis like follows:
axes: {
xaxis: {
renderer: $.jqplot.CategoryAxisRenderer,
rendererOptions: {
tickRenderer: $.jqplot.DateTickRenderer,
tickOptions: {
formatter: $.jqplot.DateTickFormatter,
formatString:'%d/%m'
}
}
}
}
I hope it helps! ;)
I am using FancyBox and I am having a slight problem.
I have a box, that is 930px wide where users can interact with things inside the popup.
The problem is, when a user in using a screen resolution that is, lets say 800x600, some of the items in the box do not display. The box has a fixed height and width (930x400).
I have tried to use scrolling: auto and scrolling: yes but nothing seems to work
Is there a way around this?
Thanks
UPDATE: - Included code snippet
$.fancybox({
"padding" : 3,
"type":"iframe",
"href":"/requirements/"+$(".sf_admin_form_field_id div.content").html()+"/edit?req_id="+$(this).children(".id").children("div").children("input").val(),
"width" : 934,
"height" : 391,
"overlayShow": true,
"overlayOpacity" : 0,
"scrolling" : "yes",
"onClosed" : function(){ window.location.reload();
}
Try
scrolling: 'auto' (note the quotes!)
and if this does not work can you include the fancybox initializer that you are using??