It's easy to write hygienic macros in Scala by using reify and eval. But it's not always possible to use reify and eval.
So, if one can't use them, what are the rules that will ensure that a macro is hygienic? And is there any way to test a macro to ensure that no bad hygiene has slipped through the cracks?
upd. In later milestones of 2.10.0, Expr.eval got renamed to Expr.splice.
Reify is hygienic, because it saves symbols along with Ident and This trees.
If your macro expansion result doesn't have symbols attached to idents (e.g. you have just Ident("x") to specify a reference to something named x), then subsequent typechecking of the macro expansion will bind x to whatever is in scope of the call site (or if that scope does not have an x, you will get a compilation error).
To the contrast, when your macro expansion has symbols for its idents, typechecker doesnt attempt to re-resolve them, and simply uses what it has. This means that when you reify an expression and use the result in a macro expansion, then it will carry its symbols into the call site. Well, not all symbols, e.g. it is impossible to refer to local variables or to private/protected things, but references to globally accessible declarations are persisted.
Bottom line is that to check whether your macro is hygienic, check whether your idents and thises have symbols attached to them. You can achieve this by reifying or by manually assigning symbols to your hand-crafted trees.
Since reify is a macro, I'd just look at its implementation to figure out what it does.
Related
Is the distinction between the 3 different let forms (as in Scheme's let, let*, and letrec) useful in practice?
I am current in the midst of developing a lisp-style language that does current support all 3 forms, yet I have found:
regular "let" is the most inefficient form, effectively having to translate to an immediately called lambda form and the instructions generated are nearly identical. Additionally, I haven't found myself needing this form very often.
let* (sequential binding) seems to be the most practically useful and most often used. This form can be translated to a sequence of nested "lets", each environment storing a single variable. But this again is highly inefficient, wasting space and lookup time.
letrec (recursive binding) can be efficiently implemented, given that no initializer expression refers to an unbound variable. Typically the case is that all initializers are lambda expressions and the above is true.
The question is: since letrec can be efficiently implemented and also subsumes the behavior of let*, regular let is not often used and can be converted to a lambda form with no great loss of efficiency, why not make default "let" have the behavior of the current "letrec" and be rid of the original "let"?
This [let*] form can be translated to a sequence of nested "lets", each environment storing a single variable. But this again is highly inefficient, wasting space and lookup time.
While what you are saying here is not incorrect, in fact there is no need for such a transformation. A compiling strategy for the simple let can handle the semantics of let* with just simple modifications (possibly supporting both with just a flag passed to common code).
let* just alters the scoping rules, which are settled at compile time; it's mostly a matter of which compile-time environment object is used when compiling a given variable init form.
A compiler can use a single environment object for the sequential bindings of a let*, and destructively update it as it compiles the variable init forms, so that each successive init form sees a more and more extended version of that environment which contains more and more variables. At the end of that, the complete environment is available with all the variables, for doing the code generation for generating the frame and whatnot.
One issue to watch out for is that a flat environment representation for let* means that lexical closures captured during the variable binding phase can capture future variables which are lexically invisible to them:
(let* ((past 42)
(present (lambda () (do-something-with past)))
(future (construct-huge-cumbersome-object)))
...))
If there is a single run-time environment object here containing the compiled versions of the variables past, present and future, then it means that the lambda must capture that environment. Which means that although ostensibly the lambda "sees" only the past variable, because future is not in scope, it has de facto captured future.
Thus, garbage collection will consider the huge-cumbersome-object to be reachable for as long as the lambda remains reachable.
There are ways to address this, like accompanying the environmental reference emanating from the lambda with some kind of frame index which says, "I'm only referencing part of the environment vector up to index 13". Then when the garbage collector traverses this fenced reference, it will only mark the indicated part of the environment vector: cells 0 to 13.
Anyway, about whether to implement both let and let*. I suspect if Lisp were being "green field" designed from scratch today, many designers would like reach for the sequentially binding version to be called let. The parallel construct would be the one available under the special name let*. The situations when you actually need let to be parallel are fewer. For instance, let allows us to re-bind a pair of variable symbols such that their contents appear exchanged; but this is rarely something that comes up in application programming. In some programming language cultures, variable shadowing is frowned up on entirely; GNU C has a -Wshadow warning against it, for instance.
Note how in ANSI Common Lisp, which has let and let*, the optional parameters of a function behave sequentially, like let*, and this is the only binding strategy supported! So that is to say:
(lambda (required &optional opt1 (opt2 opt1)) ...)
Here the value of opt2 is defaulted from whatever the value of opt1 is at the time of the call. The initialization expression of opt2 has the opt1 parameter in scope.
Also, in the same Lisp dialect, the regular setf is sequential; if you want parallel assignment you must use psetf, which is the longer name of the two.
Common Lisp already shows evidence of design decisions more recent than let tend to favor sequential operation, and designate the parallel as the extraordinary variant.
Think of metaprogramming. If your default let will sequentially create nested scopes, you'll have to make sure that none of the initialiser expressions are referring to the names from the wrong scopes. You have such a guarantee with a regular let. Control over name scoping is very important when you're generating code.
Letrec is even worse, it's introducing a very complicated scope rules that cannot be easily reasoned with.
In my ongoing quest to learn lisp, I'm running into a conceptual problem. It's somewhat akin to the question here, but maybe it's thematically appropriate to lisp that my question is a level of abstraction up.
As a rule, when should you create a macro vs. a function? It seems to me, maybe naively, that there would be very few cases where you must create a macro instead of a function, and that in most remainder cases, a function would generally suffice. Of these remainder cases, it seems like the main additional value of a macro would be in clarity of syntax. And if that's the case, then it seems like not just the decision to opt for macro use but also the design of their structures might be fundamentally idiosyncratic to the individual programmer.
Is this wrong? Is there a general case outlining when to use macros over functions? Am I right that the cases where a macro is required by the language are generally few? And lastly, is there a general syntactic form that's expected of macros, or are they generally used as shorthands by programmers?
I found a detailed answer, from Paul Graham's On Lisp, bold emphases added:
Macros can do two things that functions can’t: they can control (or prevent) the evaluation of their arguments, and they are expanded right into the calling context. Any application which requires macros requires, in the end, one or both of these properties.
...
Macros use this control in four major ways:
Transformation. The Common Lisp setf macro is one of a class of macros which pick apart their arguments before evaluation. A built-in access function will often have a converse whose purpose is to set what the access function retrieves. The converse of car is rplaca, of cdr, rplacd, and so on. With setf we can use calls to such access functions as if they were variables to be set, as in (setf (car x) ’a), which could expand into (progn (rplaca x ’a) ’a).
To perform this trick, setf has to look inside its first argument. To know that the case above requires rplaca, setf must be able to see that the first argument is an expression beginning with car. Thus setf, and any other operator which transforms its arguments, must be written as a macro.
Binding. Lexical variables must appear directly in the source code. The first argument to setq is not evaluated, for example, so anything built on setq must be a macro which expands into a setq, rather than a function which calls it. Likewise for operators like let, whose arguments are to appear as parameters in a lambda expression, for macros like do which expand into lets, and so on. Any new operator which is to alter the lexical bindings of its arguments must be written as a macro.
Conditional evaluation. All the arguments to a function are evaluated. In constructs like when, we want some arguments to be evaluated only under certain conditions. Such flexibility is only possible with macros.
Multiple evaluation. Not only are the arguments to a function all evaluated, they are all evaluated exactly once. We need a macro to define a construct like do, where certain arguments are to be evaluated repeatedly.
There are also several ways to take advantage of the inline expansion of macros. It’s important to emphasize that the expansions thus appear in the lexical context of the macro call, since two of the three uses for macros depend on that fact. They are:
Using the calling environment. A macro can generate an expansion containing a variable whose binding comes from the context of the macro call. The behavior of the following macro:
(defmacro foo (x) ‘(+ ,x y))
depends on the binding of y where foo is called.
This kind of lexical intercourse is usually viewed more as a source of contagion than a source of pleasure. Usually it would be bad style to write such a macro. The ideal of functional programming applies as well to macros: the preferred way to communicate with a macro is through its parameters. Indeed, it is so rarely necessary to use the calling environment that most of the time it happens, it happens by mistake...
Wrapping a new environment. A macro can also cause its arguments to be evaluated in a new lexical environment. The classic example is let, which could be implemented as a macro on lambda. Within the body of an expression like (let ((y 2)) (+ x y)), y will refer to a new variable.
Saving function calls. The third consequence of the inline insertion of macro expansions is that in compiled code there is no overhead associated with a macro call. By runtime, the macro call has been replaced by its expansion. (The same is true in principle of functions declared inline.)
...
What about those operators which could be written either way [i.e. as a function or a macro]?... Here are several points to consider when we face such choices:
THE PROS
Computation at compile-time. A macro call involves computation at two times: when the macro is expanded, and when the expansion is evaluated. All the macro expansion in a Lisp program is done when the program is compiled, and every bit of computation which can be done at compile-time is one bit that won’t slow the program down when it’s running. If an operator could be written to do some of its work in the macro expansion stage, it will be more efficient to make it a macro, because whatever work a smart compiler can’t do itself, a function has to do at runtime. Chapter 13 describes macros like avg which do some of their work during the expansion phase.
Integration with Lisp. Sometimes, using macros instead of functions will make a program more closely integrated with Lisp. Instead of writing a program to solve a certain problem, you may be able to use macros to transform the problem into one that Lisp already knows how to solve. This approach, when possible, will usually make programs both smaller and more efficient: smaller because Lisp is doing some of your work for you, and more efficient because production Lisp systems generally have had more of the fat sweated out of them than user programs. This advantage appears mostly in embedded languages, which are described starting in Chapter 19.
Saving function calls. A macro call is expanded right into the code where it appears. So if you write some frequently used piece of code as a macro, you can save a function call every time it’s used. In earlier dialects of Lisp, programmers took advantage of this property of macros to save function calls at runtime. In Common Lisp, this job is supposed to be taken over by functions declared inline.
By declaring a function to be inline, you ask for it to be compiled right into the calling code, just like a macro. However, there is a gap between theory and practice here; CLTL2 (p. 229) says that “a compiler is free to ignore this declaration,” and some Common Lisp compilers do. It may still be reasonable to use macros to save function calls, if you are compelled to use such a compiler...
THE CONS
Functions are data, while macros are more like instructions to the compiler. Functions can be passed as arguments (e.g. to apply), returned by functions, or stored in data structures. None of these things are possible with macros.
In some cases, you can get what you want by enclosing the macro call within a lambda-expression. This works, for example, if you want to apply or funcall certain macros:> (funcall #’(lambda (x y) (avg x y)) 1 3) --> 2. However, this is an inconvenience. It doesn’t always work, either: even if, like avg, the macro has an &rest parameter, there is no way to pass it a varying number of arguments.
Clarity of source code. Macro definitions can be harder to read than the equivalent function definitions. So if writing something as a macro would only make a program marginally better, it might be better to use a function instead.
Clarity at runtime. Macros are sometimes harder to debug than functions. If you get a runtime error in code which contains a lot of macro calls, the code you see in the backtrace could consist of the expansions of all those macro calls, and may bear little resemblance to the code you originally wrote.
And because macros disappear when expanded, they are not accountable at runtime. You can’t usually use trace to see how a macro is being called. If it worked at all, trace would show you the call to the macro’s expander function, not the macro call itself.
Recursion. Using recursion in macros is not so simple as it is in functions. Although the expansion function of a macro may be recursive, the expansion itself may not be. Section 10.4 deals with the subject of recursion in macros...
Having considered what can be done with macros, the next question to ask is: in what sorts of applications can we use them? The closest thing to a general description of macro use would be to say that they are used mainly for syntactic transformations. This is not to suggest that the scope for macros is restricted. Since Lisp programs are made from lists, which are Lisp data structures, “syntactic transformation” can go a long way indeed...
Macro applications form a continuum between small general-purpose macros like while, and the large, special-purpose macros defined in the later chapters. On one end are the utilities, the macros resembling those that every Lisp has built-in. They are usually small, general, and written in isolation. However, you can write utilities for specific classes of programs too, and when you have a collection of macros for use in, say, graphics programs, they begin to look like a programming language for graphics. At the far end of the continuum, macros allow you to write whole programs in a language distinctly different from Lisp. Macros used in this way are said to implement embedded languages.
Yes, the first rule is: don't use a macro where a function will do.
There are a few things you can't do with functions, for example conditional evaluation of code. Others become quite unwieldy.
In general I am aware of three recurring use cases for macros (which doesn't mean that there aren't any others):
Defining forms (e. g. defun, defmacro, define-frobble-twiddle)
These often have to take some code snippet, wrap it (e. g. in a lamdba form), and register it somewhere, maybe even multiple places. The users (programmers) should only concern themselves with the code snippet. This is thus mostly about removing boilerplate. Additionally, the macro can process the body, e. g. registering docstrings, handle declarations etc.
Example: Imagine that you are writing a sort of event mini-framework. Your event handlers are pure functions that take some input and produce an effect declaration (think re-frame from the Clojure world). You want these functions to be normal named functions so that you can just test them with the usual testing frameworks, but also register them in a lookup table for your event loop mechanism. You'd maybe want to have something like a define-handler macro:
(defvar *handlers* (make-hash-table)) ; internal for the framework
(defmacro define-handler (&whole whole name lambda-list &body body)
`(progn (defun ,#(rest whole))
(setf (gethash ,name *handlers*)
(lambda ,lambda-list ,#body)))) ; could also be #',name
Control constructs (e. g. case, cond, switch, some->)
These use conditional evaluation and convenient re-arrangement of the expression.
With- style wrappers
This is an idiom to provide unwind-protect functionality to some arbitrary resource. The difference to a general with construct (as in Clojure) is that the resource type can be anything, you don't have to reify it with something like a Closable interface.
Example:
(defmacro with-foo-bar-0 (&body body)
(let ((foo-bar (gensym "FOO-BAR")))
`(let (,foo-bar))
(shiftf ,foo-bar (aref (gethash :foo *buzz*) 0) 0)
(unwind-protect (progn ,#body)
(setf (aref (gethash :foo *buzz*) 0) ,foo-bar)))))
This sets something inside a nested data structure to 0, and ensures that it is reset to the value it had before on any, even non-local, exit.
[This is a much-reduced version of a longer, incomplete answer which I decided was not appropriate for SE.]
There are no cases where you must use a macro. Indeed, there are no cases where you must use a programming language at all: if you are happy to learn the order code for the machine you are using and competent with a keypunch then you can program that way.
Most of us are not happy doing that: we like to use programming languages. These have two obvious benefits and one less-obvious but far more important one. The two obvious benefits:
programming languages make programming easier;
programming languages make programs portable across machines.
The more important reason is that building languages is an enormously successful approach to problem solving for human beings. It's so successful that we do it all the time, without even thinking we are doing it. Every time we invent some new term for something we are in fact inventing a language; every time a mathematician invents some new bit of notation they are inventing a language. People like to sneer at these languages by calling them 'jargon', 'slang' or 'dialect' but, famously: a shprakh iz a dialekt mit an armey un flot (translated: a language is a dialect with an army and navy).
The same thing is true for programming languages as is true for natural languages, except that programming languages are designed to communicate both with other humans and with a machine, and the machine requires very precise instructions. This means that it can be rather hard to build programming languages, so people tend to stick with the languages they know.
Except that they don't: the approach of building a language to describe some problem is so powerful that people in fact do this anyway. But they don't know that they are doing it and they don't have the tools to do it so what they end up with tends to be a hideous monster stitched together from pieces of other things with the robustness and readability of custard. We've all dealt with such things. A common characteristic is 'language in a string' where one language appears within strings of another language, with constructs of this inner language being put together by string operations in the outer language. If you are really lucky this will go several levels deep (I have seen three).
These things are abominations, but they are still the best way of dealing with large problem areas. Well, they are the best way if you live in a world where constructing a new programming language is so hard that only special clever people can do it
But it's hard only because if your only tool is C then everything looks like a PDP-11. If instead we used a tool which made the incremental construction of programming languages easy by allowing them to be defined in terms of simpler versions of themselves in a lightweight way, then we could just construct whole families of programming languages in which to talk about various problems, each of which would simply be a point in the space of possible languages. And anyone could do this: it would be a little bit harder than just writing functions, because working out grammar rules is a little bit harder than thinking up new words, but it would not be a lot harder.
And that's what macros do: they let you define programming languages to talk about a particular problem area in a way which is extremely lightweight. One such language is Common Lisp, but it's just one starting point in the space of Lisp-family languages: a point from which you can build the language you actually want (and people, of course, will belittle these languages by calling them 'dialects': well, a programming language is only a dialect with a standards committee).
Functions let you add to the vocabulary of the language you are building. Macros let you add to the grammar of the language. Between them they let you define a new language in which to talk about the problem area you are interested in. And doing that is the whole point of programming in Lisp: Lisp is about building languages to talk about problem areas.
An soon as you are little familiar to macros, you will wonder why you ever had this question. :-)
Macros are in no way alternatives to functions and neither vice versa. It just seems to be so, if you are working on the REPL, because macro expansion, compilation and running is happening within the moment you are pressing [enter].
Macros are running at compile time, so any macro-processing is finished, as son as your definition runs. There is no way to "call" a macro at the runtime of the definition that involves this very macro.
Macros just calculate S-exprs, that will be passed to the compiler.
Just think of a macro as something, that is coding for you.
This is easier to understand with little more code in your editor than with small definitions the REPL. Good luck!
From the CLHS
symbol-macrolet lexically establishes expansion functions for each of the symbol macros named by symbols.
...
The use of symbol-macrolet can be shadowed by let.
This allows the following code to work (inside *b* x is bound to '1'):
CT> (with-slots (x y z) *b*
(let ((x 10))
(format nil "~a ~a ~a" x y z)))
"10 2 3"
My question is: How does symbol-macro let know which forms are allowed to shadow it? I ask as macros cannot guarentee that let has not been redefined or that the user has not created another form to do the same job as let. Is this a special 'dumb' case that just looks for the cl:let symbol? Or is there some more advance technique going on?
I am happy to edit this question if it is too vague, I am having difficulty articulating the issue.
See 3.1.1.4 and the surrounding materials.
Where is that quote from? I don't think it's entirely correct, since let is not the only thing that can shadow the name established by macrolet in the lexical environment.
I don't think it does much harm to reveal that the lexical environment isn't just an abstract concept, there is an actual data structure that manifests it. The lexical environment is available to macros at compile time via the &environment binding mechanism. Macros can use that to get a window into the environment and there is a protocol for using the environment. So, to give a simple example, macros can be authored that are sensitive to declarations in the lexical environment, for example expanding one way if a variable is declared fixnum.
The implementation of the environment is left up to the implementers, but heh it is just stack of names with information about the names. So lambda bindings, macrolet, labels, let*, etc. etc. are merely pushing new names into that stack and thus shadowing the old names. And lexical declarations are adding to the information about the names.
The compiler or evaluator then uses the environment (stack) to guide how the resulting code or execution behaves. It's worth noting that this data structure need not survive into runtime, though often some descendent of it does to help the debugger.
So to answer you question: macrolet doesn't know anything about what forms in it's &body might be doing.
As you can see SYMBOL-MACROLET is a built-in feature of Common Lisp. Just as LET. These special operators can't be redefined and it is not allowed to do so.
Common Lisp only has a fixed set of special operators and no way to define one by the user. There are only these ones defined: Common Lisp special operators.
Since macros will be expanded, they expand to the basic primitives: function calls and special forms. Thus the compiler/interpreter implements symbol-macrolet and this task is limited by the number of primitive forms. If the user implements his/her own LET, eventually this implementation boils also down to function calls and special forms - all uses of macros will be expanded to those, eventually. But those are known and there is nothing new for symbol-macrolet.
As far as I know, the pattern&template-based Scheme macro system works by first pattern matching a macro invocation, obtaining a substitution in case of success, applying the resulted substitution to the corresponding template to build up a (maybe) partially-expanded expression, and then continuously expanding the resulted expression. If what I describe is true (please correct me otherwise), then it seems to me this building-up and expanding-again model is not efficient. Why does the expansion need to be done like this? Is it possible to finish the expansion by a run down the template once and for all?
Keep in mind that macros can be handled define time for procedures and compile time for a whole program.
Also, a macro expansion might turn into another (or similar) macro form that needs expanding. Eg. you can make a macro that ends up as a cond expression which of course is a macro for nested if expressions in most Schemes.
Have you seen Alexpander? It evaluates a program (in one expression) and returns an equal program without macros.
The semantics of the macro system are specified in the way you describe. However, implementations are free to implement that specification any way they want; in particular, they could "inline" macro expansions ahead of time to speed the process of macro expansion.
I'm not aware of any Scheme implementations that do what you describe, and I would guess it's because macro expansion is not usually a big bottleneck in compilation.
I have seen one answer of How does Lisp let you redefine the language itself?
Stack Overflow question (answered by Noah Lavine):
Macros aren't quite a complete redefinition of the language, at least as far as I know (I'm actually a Schemer; I could be wrong), because there is a restriction. A macro can only take a single subtree of your code, and generate a single subtree to replace it. Therefore you can't write whole-program-transforming macros, as cool as that would be.
After reading this I am curious about whether there are "whole-program-transforming macros" in Lisp or Scheme (or some other language).
If not then why?
It is not useful and never required?
Same thing could be achieved by some other ways?
It is not possible to implement it even in Lisp?
It is possible, but not tried or implemented ever?
Update
One kind of use case
e.g.
As in stumpwm code
here are some functions all in different lisp source files
uses a dynamic/global defvar variable *screen-list* that is defined in primitives.lisp , but used in screen.lisp, user.lisp, window.lisp.
(Here each files have functions, class, vars related to one aspect or object)
Now I wanted to define these functions under the closure where
*screen-list* variable available by let form, it should not be
dynamic/global variable, But without moving these all functions into
one place (because I do not want these functions to lose place from their
related file)
So that this variable will be accessible to only these functions.
Above e.g. equally apply to label and flet, so that it will further possible
that we could make it like that only required variable, function will be available,
to those who require it.
Note one way might be
implement and use some macro defun_with_context for defun where first argument is
context where let, flet variables definend.
But apart from it could it be achieved by reader-macro as
Vatine and Gareth Rees answered.
You quoted Noah Lavine as saying:
A macro can only take a single subtree of your code, and generate a single subtree to replace it
This is the case for ordinary macros, but reader macros get access to the input stream and can do whatever they like with it.
See the Hyperspec section 2.2 and the set-macro-character function.
In Racket, you can implement whole-program-transforming macros. See the section in the documentation about defining new languages. There are many examples of this in Racket, for example the lazy language and Typed Racket.
Off the top of my head, a few approaches:
First, you can. Norvig points out that:
We can write a compiler as a set of macros.
so you can transform an entire program, if you want to. I've only seen it done rarely, because typically the intersection between "things you want to do to every part of your program" and "things that you need macro/AST-type transformations for" is a pretty small set. One example is Parenscript, which transforms your Lisp code ("an extended subset of CL") into Javascript. I've used it to compile entire files of Lisp code into Javascript which is served directly to web clients. It's not my favorite environment, but it does what it advertises.
Another related feature is "advice", which Yegge describes as:
Great systems also have advice. There's no universally accepted name for this feature. Sometimes it's called hooks, or filters, or aspect-oriented programming. As far as I know, Lisp had it first, and it's called advice in Lisp. Advice is a mini-framework that provides before, around, and after hooks by which you can programmatically modify the behavior of some action or function call in the system.
Another is special variables. Typically macros (and other constructs) apply to lexical scope. By declaring a variable to be special, you're telling it to apply to dynamic scope (I think of it as "temporal scope"). I can't think of any other language that lets you (the programmer) choose between these two. And, apart from the compiler case, these two really span the space that I'm interested in as a programmer.
A typical approach is to write your own module system. If you just want access to all the code, you can have some sort of pre-processor or reader extension wrap source files with your own module annotation. If you then write your own require or import form, you will ultimately be able to see all the code in scope.
To get started, you could write your own module form that lets you define several functions which you then compile in some clever way before emitting optimized code.
There's always the choice of using compiler macros (they can do whole-function transformation based on a lew of criteria, but shouldn't change the value returned, as that would be confusing).
There's reader macros, they transform the input "as it is read" (or "before it is read", if you prefer). I haven't done much large-scale reader-macro hacking, but I have written some code to allow elisp sourec to be (mostly) read in Common Lisp, with quite a few subtle differences in syntactic sugar between the two.
I believe those sorts of macros are called code-walking macros. I haven't implemented a code walker myself, so I am not familiar with the limits.
In Common LISP, at least, you may wrap top-level forms in PROGN and they still retain their status as top-level forms (see CLTL2, section 5.3). Therefore, the limitation of a macro generating a single subtree is not much of a limitation since it could wrap any number of resulting subtrees within PROGN. This makes whole-program macros quite possible.
E.g.
(my-whole-program-macro ...)
= expands to =>
(progn
(load-system ...)
(defvar ...)
(defconstant ...)
(defmacro ...)
(defclass ...)
(defstruct ...)
(defun ...)
(defun ...)
...
)