I get my code generated from the maven-jaxb2-plugin maven plugin. It puts the code into target/generated-sources. Now I have to manually left click onto the project -> properties-> Java Build Path-> Add Folder.... That's kind of annoying for someone downloading it from SVN.
Is there some way to get that dome automatically through my pom?
This kind of stuff is the responsibility of IDE's Maven plugin and fortunately M2E supports it since recently (finally!) through the concept of M2E connectors, that is M2E extensions that understand a nature and lifecycle binding of certain plugins. And because it's since recently, not much Maven plugins have their connectors for M2E.
However, you're lucky, because Jaxb2 plugins are actually already supported. I assume you're already using M2E. Then go to Preferences -> Maven -> Discovery, then Open Catalog, then find Jaxb2 connector.
maven add-sources should do the trick for netbeans or eclipse
M2E and having maven generated source folders as eclipse source folders
Related
I have an application made up of a number of maven projects. I work on it in Eclipse. Some of the projects use Maven plugins to generate stub classes for web services etc.
When i import the projects into a new workspace I have to issue a maven generate sources command followed by attach source folders to build path on each project. The application i work on has more than 5-6 projects which require these steps.
Is there a plugin I can install in Eclipse to pick up the generated sources, or even one that generates the sources and updates the build path to save the manual steps?
I'm pretty sure the m2e plugin takes care of this automatically. m2e is included in the primary Java and Java EE packages of recent Eclipse versions, so you probably already have it. If you right-click on your project, and there is a Maven submenu, then the project is already managed by m2e. Otherwise, right-click and choose Configure > Convert to Maven project.
Well, it depends on exact maven plugin you are using.
generate sources
Before I considered that m2e connector would be needed for any non common plugin, like generator. But I came recently on some plugins (1), that do it without special m2e connector.
attach source folders to build path
For this part check build-helper-maven-plugin and answer to M2E and having maven generated source folders as eclipse source folders
I'm running through the jboss as7 getting started guide here http://hudson.jboss.org/jenkins/job/JBoss-AS7-Docs/lastSuccessfulBuild/artifact/guides/developer-getting-started-guide/target/docbook/publish/en-US/html/helloworld.html . The tutorial has us setting up an example helloworld quickstart maven project.
I'm able to deploy this project from the command line successfully
mvn package jboss-as:deploy
but when I attempt to deploy the helloworld example from Eclipse - the 'run on server' option is missing from the run menu. I have Eclipse 3.7 and maven wtp installed.
Not sure how to fix, any advice appreciated.
The run on server related options only appears if your project has the Dynamic Web Moudle project facets.
You can try to configure it using the Project Facets options in your project properties
To help any other developer with this problem.
I was dealing with this issue recently. Maven projects are structured differently than Dynamic Web Projects. So when you manually add the Dynamic Web Module using Project Facets, eclipse may not register it properly as a Maven project.
To solve this, you have to install the m2e plugin and M2E Eclipse WTP plugin (this tells Eclipse how to run your maven projects).
Go to Help -> Eclipse Marketplace to search for the plugins.
After installing, you will need to restart Eclipse then you will be able to use "run on server" for your Maven projects.
Note: You may need to remove/delete the previous project then import/create it again after the restart.
You have to add maven eclipse pluginin your pom.xml file..
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-eclipse-plugin</artifactId>
<version>2.9</version>
</plugin>
According to Red Hat's site, The M2E Eclipse WTP plugin (m2eclipse-wtp) has been deprecated in favor of the newer m2e-wtp plugin. If you don't want to go through the marketplace, the URL for the new plugin is http://download.eclipse.org/technology/m2e/releases.
After copying the project and refreshing it, closing and reopening it, removing and re-adding it (right-click on server) and updating Maven... the option reappeared.
I think it occurs when you up the version of the Java compiler in your .pom file, when you up the compiler in project properties or it has to do with using the newer Jersey (2) version or when you both include local libraries and maven dependencies, it may also be a consequence of a combination of these. It's pretty unclear.
Note though, that you can still add/remove projects by right-clicking on the server in the servers tab.
I successfully created a project using Wicket quickstart and turned it into an Eclipse dynamic web project by running
mvn eclipse:clean eclipse:eclipse -Dwtpversion=2.0
I imported the project to Eclipse without any issues, but got this warning for each JAR:
Classpath entry M2_REPO/**.jar will not be exported or published.
Runtime ClassNotFoundExceptions may result.
I can fix this by using right click → QuickFix on each warning and selecting "Mark the associated raw classpath entry as a publish/export dependency," but this takes a lot of time and would not be possible if there were a lot of dependencies.
There must be a way to have Maven do this for me; what is it?
EDIT: I've found out that using m2eclipse core + Maven Integration for WTP (from m2eclipse extras) resolves my issues.
I'm still interested in how to achieve this without m2eclipse, though, just out of curiosity :p
The two Maven plugins needed to work with web projects in Eclipse are available from the Eclipse Marketplace.
Maven Integration for Eclipse (included in the Java version of Eclipse)
Maven Integration for Eclipse WTP
I have a very large workspace with about 30 projects all together. I am using Eclipse 3.5 with m2eclipse. I check out of my subversion repository using the defaults in order to import the projects into my workspace.
I create a Tomcat server instance, and publish my web project to the tomcat server. Sounds easy enough.
The problem is that it does not appear as though the transitive dependencies for my other projects are being automatically added to the container, so when the container starts up I get classnotfound exceptions, etc.
I go into the web project's properties, and I notice that the Java EE Module Dependencies are NOT checked for some of the transitive dependencies. I check them, and everything seemingly works until I do a project clean build, when the Java EE Module Dependencies are automatically reset by eclipse, so I need to recheck them. This is maddening, and I was hoping there was some way to automatically pull in all of the transitive dependencies when working with Eclipse WTP.
I should mention, using standard maven build works just fine, and everything gets pulled in appropriately into the resulting WAR file. It just doesn't work so good with WTP for some reason.
You need to make sure that you have "Maven integration for WTP" feature from m2eclipse installed. There is a simple tutorial available at http://docs.sonatype.org/display/M2ECLIPSE/WTP+mini+howto
What version of WTP and m2eclipse you are using? Check that dependency version declared in project's pom.xml matches with version declared in workspace project and make sure that workspace dependency resolution is enabled.
Also, you can try to run "Maven / Update project configuration" from the project popup menu and check that there is no errors on Maven console and in Eclipse's own log.
If the above won't help, try to reproduce issue on a smaller project and then submit it with a bug report
It appears as though the latest version of m2eclipse (.99x) solves all of my issues.
If you are tempted to use m2eclipse wtp extras you need to be aware that they are not supported by Sonatype and, although mostly OK, are not 100% robust.
See http://maven.40175.n5.nabble.com/What-is-the-recommended-alternative-to-m2eclipse-extras-WTP-integration-td135727.html
currently, I am developing web-apps using Eclipse.
The build is done using Maven.
The problem is that during compile time Eclipse is showing a lot of errors since there are a lot of missing jars. The final result is OK since the Maven is responsible for fetching these jars.
How can make the eclipse not fail the compilation?
I know I can just add the missing jars to the project classpath, but that's not what I'm looking for because I have a lot of projects, and the .classpath file of each project is a file common to all developers, so I would rather not to change it.
My question is therefor, is there a way to add a common classpath to all Eclipse projects without changing each project's classpath?
I use m2eclipse. It adds a classpath container to the .classpath file. This container is populated with the Maven dependencies by a Maven builder (added to the .project when the Maven nature is enabled) which processes the POM and downloads any artifacts (and sources if needed).
To enable the Maven nature (assuming the plugin is installed), right-click on a project and select Enable Dependency Management.
By default m2eclipse uses an embedded version of Maven to do its processing. This typically means a separate local repository and duplicate files on the box. You can configure it to use your standard Maven installation in Window->Preferences->Maven->Installations. Then adding the path to your Maven installation (normally the same as M2_HOME).
There is another Maven plugin for Eclipse called IAM (formerly called Q4E). IAM is an Eclipse integration project and has some promising features - it's worth keeping an eye on.
There is a comparison of the Eclipse Maven integrations, alongside the maven-eclipse-plugin (a goal that generates the Eclipse metadata files from the POM contents). I personally find the maven-eclipse-plugin more trouble than it's worth but it may suit your purposes and it is handy for generating the initial metadata if you have none checked into the SCM.
Check out the m2eclipse plugin. It will read each project's POM and automatically fetch and add all dependencies to the classpath.