Hi I am working with ReplicAction tool to transfer data from Lotus Notes View to Oracle Database.
When i Create the link document for Oracle DB it is created successfully without any error
When I create the Include Table for Oracle Db it is created successfully and all columns are listed
When i create the Replication it is also created successfully,
But when the job executes it gives the error is log :
05/08/2012 01:37:16 AM Starting Replication: BADtoProductPortal
05/08/2012 01:37:19 AM Error: <ODBC Error> [DataDirect][ODBC Oracle driver][Oracle]ORA-12154: TNS:could not resolve service name
05/08/2012 01:37:19 AM Error: Information: Unable to open Link: PPLink
05/08/2012 01:37:19 AM Error: Replication to Link <PPLink> did not complete
05/08/2012 01:37:20 AM End of Replication: BADtoProductPortal
If the error is with service name, Then i think we should not be able to create Link document also.
When i use ODBC connection for link, then i am unable to create Replication job, giving the error like Notes Data field "ID" does not match the source data field.
But i know it was working before.
I suggest to check that the TASK runing the job uses the same TNS entry as you are doing "manually".
I suggest to check that the TASK has also access to your Oracle driver. This tasks has right to run it?
ORA-12154 error is thrown during the logon process to a database. This error indicates that the communication software (TNS) in Oracle ( SQL *Net or Net8 ) did not recognize the host/service name specified in the connection parameters.
So the issue is clearly a type en "environment difference" between your configuration when you run manually the replication and when the job run it.
Hope I help
I'm assuming here that when you successfully replicate you're doing it manually from your local machine, and when the job fails it's running scheduled on a server. If that's the case I agree with Emmanuel. Remember running the job locally uses the local tnsnames.ora file, running it scheduled uses the tnsnames.ora file on the server. You may not be aware of anything changing but are you responsible for maintainance on the server?
Related
I need to implement migration tool like Flyway in order to use Jenkins to deploy DB changes.
I tried to add jt400.jar file and added configuration as follows:
flyway.url=jdbc:as400://192.168.171.251:446/DBDEV
flyway.driver=com.ibm.as400.access.AS400JDBCDriver
as a driver and it would not connect with this message:
ERROR: No database found to handle jdbc:as400://192.168.171.251:446/DBDEV
I also tried with using IBM DB2 driver and had configuration
flyway.url=jdbc:db2://192.168.171.251:50000/DBDEV
flyway.driver=com.ibm.db2.jcc.DB2Driver
this time I am getting this kind of refusal message
ERROR:
Unable to obtain connection from database (jdbc:db2://192.168.171.251:50000/DBDEV) for user 'DEVUSER':
[jcc][t4][2043][11550][4.26.14] Exception java.net.ConnectException: Error opening socket to server
/192.168.171.251 on port 50,000 with message: Connection refused (Connection refused).
ERRORCODE=-4499, SQLSTATE=08001
With this test migration I am trying to create a simple table by executing this sql
CREATE TABLE PERSON (
ID INT NOT NULL,
NAME VARCHAR(100) NOT NULL
);
Anyone had this situation and solved it?
I believe that at present there is no support for flyway to work with IBM i (as/400) regardless of whether you use jt400.jar or an IBM jdbc driver.
You can either use a different database-schema versioning tool, or find a fork of flyway that supports i-series (or pay someone to create and support such a fork, it is open source...).
It seems that currently (flyway 7.7.2) does not recognize a URL that starts with "jdbc:as400:" as a Db2 URL, so it throws an exception, which is the reason that the jt400.jar style URL is rejected with exception:
"No database found to handle ..."
The github history tells a story (see: https://github.com/flyway/flyway/issues/105).
Looks like the devs did not succeed to get the AS400 support added due to the lack of a suitable available i-series testing/dev environment (and also available to travis ci) . There may have been at least one PR for such support in the past, although it seems to be removed.
If you try to use the IBM db2jcc4.jar driver to connect to i-series (as400) with a url similar to: jdbc:db2://hostname/dbname, and you explicitly use an IBM jre , and have the relevant license file (e.g. db2jcc_license_cisuz.jar on the CLASSPATH), then flyway will connect and then report the exception similar to:
Unsupported Database: AS 7.4
The flyway source code shows that flyway does not recognize this database product-name and version, at current flyway version 7.7.2.
Are you sure DBDEV is the name of your Db2 data base on the IBM i?
Use the Work with RDB Directory Entry (WRKRDBDIRE) from the green screen, and look for the *LOCAL entry.
Or use the Access Client Solutions (ACS) "Schemas" tool to see a list of DB on your system.
The above shows 2 DB's, UT29p63 and Dbtest
I am attempting to create and use an oracle DB.
Was able to create the DB using sql plus however when I attempt to connect to it via sqldeveloper I get the following error
Status : Failure -Test failed: IO Error: The Network Adapter could not establish the connection
When I check that all services are running I notice OracleVssWriterORCL is not running.
However upon attempting to start it I get the following error:
Windows could not start OracleVssWriterORCL service on local machine Error 0x80070005: Access is Denied
This is my first time using Oracle for DB so any help is greatly appreciated.
I should also note this is on a windows 10 VM
As stated above my listener was not running and going into cmd using the lsnrctrl start command fixed that issue but now I get a ORA-12505 error. Oh the fun of learning new things
I am new to freenode and postgresql. I am trying to migrate from mysql to postgresql. Currently trying to set up server for ssl. Have created my server certs and configured the .conf files for ssl according to the manual as far as I can see. Trying to restart postgre sql service fails. Windows event log gives me an event ID of 0 and says
pg_ctrl could not start server examine the log output.
I can't find any log detailing the failure to start in the postgresql folders.
I have tried to register the pgevent.dll as advised by the postgresql manual (18.11 of most recent version), but I get an error message
The module "C:postgreSQL\pg10\lib\postgresql\pgevent.dll" was loaded but the entry-point DllRegisterServer was not found
I believe that means it is either not a registrable dll or it's corrupt.
Can anyone please advise how I can track on Windows the error that is causing Postgre to fail to start?
I have an embedded database where I start an OServer and trying to connect to it from the console. I've been doing this successfully for many months and upgrading the database as new versions come out. Now, with 2.2.13, the embedded operations seem to work but I can't connect to the server with the 2.2.13 console.sh. I get the message:
Error: com.orientechnologies.orient.core.exception.OStorageException: Cannot create a connection to remote server address(es): [127.0.0.1:2424]
DB name="master"
The java code running the embedded database gets the following exception:
$ANSI{green {db=db}} Error executing request
com.orientechnologies.orient.core.exception.ODatabaseException: Error on plugin lookup: the server did not start correctly
DB name="db"
at com.orientechnologies.orient.server.OServer.getPlugin(OServer.java:850)
at com.orientechnologies.orient.server.network.protocol.binary.ONetworkProtocolBinary.openDatabase(ONetworkProtocolBinary.java:857)
at com.orientechnologies.orient.server.network.protocol.binary.ONetworkProtocolBinary.handshakeRequest(ONetworkProtocolBinary.java:229)
at com.orientechnologies.orient.server.network.protocol.binary.ONetworkProtocolBinary.execute(ONetworkProtocolBinary.java:194)
at com.orientechnologies.common.thread.OSoftThread.run(OSoftThread.java:77)
Seems to be looking for the 'cluster' plugin.
Any idea why this doesn't work anymore? It did work in 2.2.12.
Thanks
Curtis
Seems I had automatic backup turned on but the config file was missing. So, the server looked like it started up but actually didn't.
I created the config file and set enabled to false. Still didn't start up because it sees the false and stops the configuration and throws an exception because the 'delay' parameter isn't set.
I think orientdb should start up without backups enabled if the config file is missing or the enabled parameter is set to false.
At least the console is working now.
I hope someone can help. I am running codeigniter 3.05 and trying to connect to a remote PostgreSql database. If I set session to database, I get include(.../views/errors/html/error_php.php) failed to open stream error message.
No other session configuration setting generates the error. If I run a method on a model, I get the same error along with: Fatal error: Call to a member function from() on null in /opt/share/php/ci/application/libraries/ActiveRecord.php on line 295.
I run the PostgreSql client from command line and I can connect to the database ok. I am running Ubuntu 15.04 and I have checked permissions and ownership settings for Codeigniter. I had a similar problem loading the model, but, when I changed the first letter of the name of the file to uppercase, the message disappeared.
Is there a database driver that I need to change the first letter so Ubuntu can find it? Or, what else could it be?