I have to make view where there will be multiple curved or irregular shaped imageview. Now when i will touch a UIImageview then it will import image from photo gallery.For example: Suppose
I have an UIView with background image.
On that view i have 3 irregular shaped UIImageview.every UIImageview is attached with each other.
Now suppose i have touch in the first UIImageview then it will take an image from photo gallery.
When i have imported the image then that image will be as the background image of the UIImageview.
I have to make sure that if my UIImageviewis smaller then its background image then i will able to move the image or rotate the image or scale or zoom the image to adjust the image according to the size of UIImageview.
How can i do that whole process??? any help by link,source code,tutorial or anything else will be cordially appreciable.
Basically my first priority is that how can i make those irregular shaped UIImageView pro-grammatically.
IF ANY FURTHER QUERY TO ASK THEN PLEASE DON'T HESITATE.
Thanks In Advance
The one way of doing this is as follows:
Subclass from UIImageView set touchesBegan methods for each UIImageView for import image, setting on background and whatever you want to do on touch.
What does 'attached' mean? If all of them should move together, then, again, you have to deal with it in touchesBegan methods, sending messages like 'Hey views, i've moved on this vector:[vector], please do it too'.
In pt. 3.2 i didn't get your point. :( You can set in UIImageView subclass self.contentMode = UIViewContentModeScaleAspectFit or UIViewContentModeScaleToFill, so its image will always fit the view.
About irregular shape, did you read links below? I suppose there's not an super easy way to do it :(
http://www.iphonedevsdk.com/forum/iphone-sdk-development/76923-hittest-collision-for-irregular-shaped-uiviews.html
Draggable UIImageView Partially Transparent & Irregular Shaped
Simple way of using irregular shaped buttons
I have a image in UIImageView. When user taps one particular area on image, that part of image should be highlighted by a square and the subpart of image in that square should be used for scaling.
How can I do it?
Well, it's actually going to involve:
user tap gesture handling
overlay a UIView for the square to highlight
crop and scale the certain area of the original image, you may need some helpers like: https://github.com/Nyx0uf/NYXImagesKit
I have a button that changes its image to different images depending on what modus we are in.
The images are set with:[modusBtn setImage:cx forState:UIControlStateNormal];
The images have round corners and the button is of Type "Custom".
Now when the button is pressed one can see another image in the upper and lower edge background.
Really weird - the buttons ALL have round corners - but for example when the blue modus is on and shows the blue image and one presses the blue button now - one can see red little edges only on the left two corners.
I already played around with all the button attribute settings in IB, but no luck.
Did anyone have a similar experience when changing button images?
So far all my button images where 100% rectangular and did not have round corners - therefore I never experienced this before.
Many thanks!
Use this UIButton's propriety for your button.
avatarButton.clipsToBounds = YES;
Whenever you set an image for custom button make sure to set
yourButton.backgroundColor=[UIColor clearColor];
The effect was happening as your button was using default background transitions during changing the state.
I have a UIButton that's 90x90 in size and I would like it to glow when tapped. Using showsTouchWhenHighlighted will make it glow but it's glowing out of the center of the button and for a small radius only. This might work well for a small button like the info button, but for my button size, it's not. Is there anything I can do to make it glow from the outer perimeter of the button before I resort to designing a highlighted state?
I can think of 2 ways to do what you want:
Use different highlighted background image for your button's highlighted state,
Use CoreGraphics to draw the glow effect in your button's IBAction (touchDown is a decent place).
This is assuming you want some kind of custom glow effect of course - UIButtons already naturally have a highlighted effect when touched.
How can I get a non-rectangular shaped button?
For example I do have a PNG image with alpha transparency.
How can I set the shape of a button to this image without the transparent color.
Like the others say you should have a reasonable surface for registering touch events, but I'm sure you know that and have your reasons so I'll just tell you how I did it:
I needed to do this not so long ago and what I did is what Sixten Otto just suggested. There are some hints in my original question ("UPDATE" section) for getting the alpha value for your image at a certain point:
How to create a transparent window with non-rectangular buttons?
Edit: I suggest subclassing UIControl in the example below but if you don't need any special behavior on your button apart from the "non-rectangleness" of it then just subclassing a borderless UIButton set up with your PNG will do the job and require less work. You have more control on the control's behavior by subclassing UIControl and doing it the "hard way" though.
I would suggest that you subclass UIControl and override the touch event methods, then check for alpha under the tapped point and not handle the event if alpha == 0. For drawing you override drawRect: and use the NSImage's drawInRect:fromRec:operation:fraction: method in there to draw your image in the control's frame.
First you need to load the image and get a bitmap representation of it:
buttonImage = [NSImage imageNamed:#"myButtonImage"];
buttonImageRep = [[buttonImage representations] objectAtIndex:0];
Then you can draw it to the control's view: (where stateImage is a pointer to the image that must be drawn depending on if the button is pressed or not)
- (void)drawRect:(NSRect)aRect {
[stateImage drawInRect:[self bounds] fromRect:NSMakeRect(0.0,0.0,[buttonImage size].width,[buttonImage size].height)
operation:NSCompositeSourceOver fraction:1.0];
}
At this point you have drawn your button with your png image. You can override the touch event methods and handle the event if the alpha is not 0:
NSColor *colorUnderMouse = [buttonImageRep colorAtX:mouse.x y:mouse.y];
float alpha = [colorUnderMouse alphaComponent];
That's what I did and it works wonderfully. Hope this helps!
N.B: My example is for the Mac but it should also work on the iPhone, maybe with some slight modifications.
It sounds like you are looking to have the clickable area of the button exactly match the PNG you are using.
If that is what you are looking for, I would firstly say to not do that. The iPhone is pressed using a finger, which generally doesn't have the accuracy to distinguish such a small region.
However if you are stuck on the idea, then the solution is to not use buttons at all, instead handle the click in a parent frame and manually interpret the X/Y value of the click to determine if it is in some bounding region (In the case of a rounded edge button, would likely consist of oring the result of checking 4 circles and 2 rectangles)
Edit:
Realizing part of your original question, I noticed you mentioned you wanted to handle the function automatically based on the Alpha channel. While I would recommend my method of bounding regions, you could in theory accomplish this by sampling the PNG to test the Alpha channel at a value offset by the origin of the button. Potentially even doing this in a normal button's click event.
Rectangular buttons are a button type, you can use the custom button type and assign an image to get rid of the rectangular edges of the button...heres a reference to button types http://developer.apple.com/iphone/library/documentation/UIKit/Reference/UIButton_Class/UIButton/UIButton.html#//apple_ref/doc/c_ref/UIButtonType and to UIButton http://developer.apple.com/iphone/library/documentation/UIKit/Reference/UIButton_Class/UIButton/UIButton.html
As Guvante says, it's really not a good idea to rely on precision touches. Apple, for instance, recommends that controls be at least 44px across.
I'd recommend using a UIButton of type UIButtonTypeCustom, set the button's image to your PNG, and register for touch events (see here for more on event handling). Then, in your action method, you can get the coordinates of the touch out of the event, and test those coordinates against the alpha of your image to see whether you should treat it as a "real" touch or not.
Another option could be to split your button up into multiple, rectangular parts.
#Form right about using 'drawRect' to implement custom shape for button.
But better method to exam touch inside or not inside button is using of
- (BOOL)pointInside:(CGPoint)point withEvent:(UIEvent *)event;
You can create your button transparent for touches in some parts.
If you can't use custom image for button (for example if you draw text on the button) you can use new method to draw subviews hierarchy into a image:
- (BOOL)drawViewHierarchyInRect:(CGRect)rect afterScreenUpdates:(BOOL)afterUpdates;