I am uploading ios build on testflight till now. But I am getting the following error on uploading any build (I also tried uploading the previous build again which I already uploaded on it).
Invalid IPA: Couldn't find executable specified in Info.plist - check the value of your CFBundleExecutable key.
I need to upload the build. Can someone suggest me a site other than testflight where I may upload the ios build or ipa file?
The other site you can use is http://diawi.com, i use it on my project now, very helpfull.
We had a problem with CFBundleExecutable ${EXECUTABLE_NAME}. Our iOS app was for example called OurAppName.
Ran fine in Simulator but when archived and deployed via organizer said CFBundleExecutable was not an executable file.
We checked the plist and the value for CFBundleExecutable was 'ourappname'. we unzipped the ipa > app folder (see how below) and there was a fie called ourappname but it was smaller than expected and not a exe (USE:ls -l should have x at end of -rwxr-xr-x ).
Bug was caused by a text file called 'ourappname' and when archive was built it took that as the exe and not OurAppName. Answer was to rename and or delete the file with same name as our exe. Do full clean build. and recheck final ipa.
To see contents of OurAppName.ipa :
Rename to OurAppName_ipa.zip (ignore warnings):
DOUBLE CLICK on OurAppName_ipa.zip to open (creates Payload folder containing OurAppName.app):
rename OurAppName.app to OurAppName_app (ignore warnings will change app bundle to folder).
Open OurAppName_app folder look for ...info.plist for app.
Check CFBundleExecutable is pointing to OurAppName.
Find OurAppName in folder do ls -l make sure it executable (USE:ls -l should have x at end of -rwxr-xr-x).
TIP FOR TEST FLIGHT:
If testflight download fails after 80% with UNABLE TO DOWNLOAD then drag the archive you built to a iOS device using Organizer.
Click on Device > applications and + at the bottom (i think dragging the ipa to the device in the organizer installs it as well).
in your info.plist file open as source code form and check CFBundleExecutable key is there or not and make sure it is written as
<key>CFBundleExecutable</key>
<string>${EXECUTABLE_NAME}</string>
Related
I'm working on a multi-platform iOS and Mac app. When I try and Archive and Distribute to the App Store I run into this issue:
ERROR ITMS-90259: "Bad Bundle Executable. You must include a valid CFBundleExecutable key in your bundle's information property list file."
Verified that the Info.plist for the Mac target has a CFBundleExecutable
Tried Xcode 12 & 13
Tried using App Transporter
Used Xcode 13 RC and let that auto-generate the Info.plist
I've tried everything I could find online - there's not much - and I can't get the upload to succeed.
However, I was able to replicate the issue with an entirely empty project. No dependencies, no code, nothing. The project archives successfully, but the upload fails.
Any help would be appreciated. I've spent two days on this already.
An example project that fails: https://drive.google.com/file/d/1qUN5lHEWNyNHQV54fYPXMeRsuO-cpHqW/view?usp=sharing
We had two issues causing this, making it fail when uploading a Mac build to iTunes. The first issue, we had included a package (from Steam), that had its own plist and post build script.
com.rlabrecque.steamworks.net/Editor/RedistCopy.cs - build script
com.rlabrecque.steamworks.net/Plugins/steam_api.bundle.meta - folder with plugin and plist
We renamed the post build script and removed the plugin folder, not 100% sure if the renaming was needed.
Then, we had this in our own post build script that was causing issues, so we removed it too.
rootDict.SetString("CFBundleExecutable", "${EXECUTABLE_NAME}");
Then it worked! Also worth noting that we believe the CFBundleExecutable didnt actually end up matching the file name e.g. the file produced was a.pkg and the plist says:
<key>CFBundleExecutable</key>
<string>b</string>
But seems iTunes was ok with that. We use Unity and it seems in the pList the string was set to the "Product Name" (Edit > Project Settings > Player, at the top, "Product Name").
We also didnt need to use Transporter to upload.
when I upload Iphone to App store then following bugs is coming.
Had the same issue with XCode (new submission interface), and all it took was to:
delete the build folder
clean, and then
build and archive again.
I think there's an issue with my app's .entitlements file when a .ipa is created and so I want to check the Bundle ID of the entitlements file. There's a fairly complicated build script I am using to change some stuff in there before building so I want to see what the final product is. I know that there used to be an Entitlements.plist that I could get off of the ipa but it doesn't seem to be there any longer. Is there any way to access the .entitlements file now?
For those getting here via Google, the Information Apple provides at https://developer.apple.com/library/ios/qa/qa1798/_index.html is a lot more recent.
Specifially, after unzipping the IPA:
Display the entitlements in the app by running:
codesign -d --entitlements :- "Payload/YourApp.app"
and display the provisioning profile by running:
security -D -i "Payload/YourApp.app/embedded.mobileprovision"
Sure, unzip the .ipa file which will create a Payload directory. Inside of the Payload directory is the application package. Right-click the app package in Finder to "Show Package Contents".
Look for the embedded.mobileprovision file which you can open with a text editor or plist editor. Look for the <key>Entitlements</key>
I tried to update an iphone app, which lies in an other "itunes connect" profile. I used "application loader" and everything is fine until I try to upload the zip file
I get this strange message and cant figure out whats going wrong
"The CodeResources file must be a symbolic link to _CodeSignature/CodeResources"
I opened the bundle and the folder _CodeSignature is there.
I compiled the app with my distribution profile (no problems)
How are you zipping it? I'm betting that FooApp.app/CodeResources is a file, not a symlink.
If you're using command-line "zip", you need to use zip -y -r to preserve the symlink.
Had the same issue with XCode 3.2.5 (new submission interface), and all it took was to:
delete the build folder
clean, and then
build and archive again.
I had the same issue. But then I noticed that I was building in release mode to the simulator, and not a device. When I targeted a device, I got the proper application file, which I then zipped with the iTunes Artwork and submitted without issue.
I had the same issue here but I "fixed" it after I changed the "Deployment Target" from 2.0 to 3.0 in the target I was building and removed the "Architectures" to only armv6 (before I had both armv6 and armv7). Finally I had to put 'No' to 'Build Active Architecture Only'.
I haven't figured out why I keep getting this error for every binary I create. I've followed all the standard procedures (double-checking my project settings, deleting build folders, cleaning all targets, removing and reinstalling certificates and provisioning profiles, creating and installing new certificates and provisioning profiles, repairing disk permissions, etc) but none of them seem to solve the problem.
I think the problem is that my XCode installation is unable to create symbolic links. I might reinstall it (or even OS X) to see if that fixes the issue permanently.
But in the mean time, this works for me. I use terminal to navigate into the binary and run the following commands
rm CodeResources
ln -s _CodeSignature/CodeResources CodeResources
This deletes the invalid CodeResources file and replaces it with the required symbolic link to _CodeSignature/CodeResources.
I just ran across this issue. It turned out, I had two info.plist files in my resources folder (one for the iPhone version and another for the iPad version). Once I took care of that, the issue went away.
Try this on the command line:
cd (to where your project is)
ln -s _CodeSignature/CodeResources CodeResources
I've just had the same problem. Turns out the project file project.pbxproj in Project.xcodeproj had been corrupted while uploading to an SVN server.
My solution was simply to revert to an older revision, which worked fine.
You have to:
1. Enter the AppName.app folder
2. Create a file named CodeResources
3. Open the file with a plain text editor
4. Type in _CodeSignature/CodeResources (The path where the actual CodeResources file is.)
{The app will now know where the CodeResources file is, and will have an account for all the files in the .app folder.}
I have an iphone simulator running on my Mac.
I have a .ipa file, can you please tell me how can I install it on the simulator?
You can't. If it was downloaded via the iTunes store it was built for a different processor and won't work in the simulator.
I found an .ipa file that I wanted using iTunes and copied it over to my desktop.
After that I changed the extension to .zip and extracted it.
Next I found the Payload folder and moved the application inside to my desktop.
Finally I moved that application to my iPhone simulators applications folder found at:
HD
> Applications
> Xcode.app (right click - Show Package Contents)
> Contents
> Developer
> Platforms
> iPhoneSimulator.platform
> SDKs
> iPhoneSimulator6.0.sdk
> Applications
(Note: Some apps crash more often than others.)
In Xcode 6+ and iOS8+ you can do the simple steps below
Paste .app file on desktop.
Open terminal and paste the commands below:
cd desktop
xcrun simctl install booted xyz.app
Open iPhone simulator and click on app and use
For versions below iOS 8, do the following simple steps.
Note: You'll want to make sure that your app is built for all architectures, the Simulator is x386 in the Build Settings and Build Active Architecture Only set to No.
Path: Library->Application Support->iPhone Simulator->7.1 (or another version if you need it)->Applications
Create a new folder with the name of the app
Go inside the folder and place the .app file here.
Update for Xcode 9.4.1+
Hope my answer is getting seen down here as this took me a while to figure out but I just got it working.
First of all you need to build and run the App on your simulator. Then you open the Activity Monitor. Double click the name of your App to find its content.
In the next screen open the Open Files and Ports tab and find the line with MyAppName.app/MyAppName.
Copy the link but make sure to stop at the MyAppName.app. Do not copy the path following it.
Control click onto the finder icon and select Go to folder.
]
Paste the path and click enter. You will see your MyAppName.app file.
Copy it to the Desktop and zip it. Move it to your desired 2nd computer and unzip the file. Build a random project to have a simulator open.
Lastly: Literally drag and drop the App from your Desktop into your Simulator. You will see the install and the App opens and does not crash.
You cannot run an ipa file in the simulator because the ipa file is compiled for a phone's ARM architecture, not the simulator's x86 architecture.
However, you can extract an app installed in a local simulator, send it to someone else, and have them copy it to the simulator on their machine.
In terminal, type:
open ~/Library/Application\ Support/iPhone\ Simulator/*/Applications
This will open all the applications folders of all the simulators you have installed. Each of the applications will be in a folder with a random hexadecimal name. You can work out which is your application by looking inside each of them. Once you have found out which one you want, right click it and choose "Compress ..." and it will make a zip file that you can easily copy to another computer and unzip to a similar location.
UPDATE: For Xcode 8.0+ you need to follow below Steps:
Download application from iTunes
Select downloaded app, right click show in finder
Copy .ipa file to Desktop, rename it to .zip file
Extract that .zip file and you will get directory with application name
Check that directory you will find app file in Payload folder, copy this app file
Go to ~/Library/Developer/CoreSimulator/Devices
FYI: Library folder is hidden by default in mac, you can see hidden file using below command.
defaults write com.apple.finder AppleShowAllFiles YES;
killall Finder /System/Library/CoreServices/Finder.app
Now here you'll see many directories with long hexadecimal names, these all are simulators.
To find your desired simulator, sort these directories using "Arranged By > Date Modified".
Select that simulator file and go to below location.
<HEXADECIMAL-SIMULATOR-STRING>/data/Containers/Bundle/Application/
Create new folder name with <download-app-name> and paste app file in that folder
Open Terminal and run below command to install this application
xcrun simctl install booted <APP_FILE_PATH>
Example <APP_FILE_PATH> will be looks like below:
~/Library/Developer/CoreSimulator/Devices/<HEXADECIMAL-SIMULATOR-STRING>/data/Containers/Bundle/Application/<APP_NAME>
First of all, IPAs usually only have ARM slices because the App Store does not currently accept Simulator slices in uploads.
Secondly, as of Xcode 8.3 you can drag & drop a .app bundle into the Simulator window and it will be installed. You can find the app in your build products directory ~/Library/Developer/Xcode/DerivedData/projectname-xyzzyabcdefg/Build/Products/Debug-iphonesimulator if you want to save it or distribute it to other people.
To install from the command line use xcrun simctl install <device> <path>.
device can be the device UUID, its name, or booted which means the currently booted device.
For Xcode 10, here's an easy way that worked for me for a debug IPA (development profiles)
Unzip the IPA to get the Payload folder.
Within the Payload folder is the app executable.
Drag and drop the app to an open simulator. (You might see a green add button when you drag it over the simulator)
It should install that app on that simulator.
You can run the application file of project in simulator - not .ipa file.
You can get it from:
Libraries-->Applicationsupport-->iphone simulator-->4.3(its ur simulator version)-->applications-->then u can see many files like 0CD04F.... find out your application file through open it.
You can copy the file to your system(which system simulator u need run ) location Libraries-->Applicationsupport-->iphone simulator-->4.3(its your simulator version)-->applications-->
Then open the simulator 4.3 (its your simulator version where you pasted). You can see the application installed there.
Getting from other people:
Please tell them to find out Libraries-->Applicationsupport-->iphone simulator-->4.3(its ur simulator version)-->applications-->then you can see many files like 0CD04F.... from their system and receive that file from them.
After they have got the file, please copy and paste the file in to your system `Libraries-->Applicationsupport-->iphone simulator-->4.3(its your simulator version)-->applications-->(paste the file here).
Then you can see the app is installed in your system simulator and you can run it after clicking the file.
Copy From Here:
- Run the application in the Xcode.
- Select Finder go to Go and click on select Library Library/Application Support/iPhone Simulator/7.0.3-64/Applications
- Select 32 bit folder Copy your application.
Paste To Here:
- /Applications/Xcode-Beta.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhone Simulator. SDK/Applications
- Paste here and run the simulator.
With Xcode 6:
It's very possible to build and install on a simulator.
I did it by copying the debug build configuration (I called it SimRelease for my example below) in the project settings. I changed the architectures to i386 and x86_64 (not sure how necessary this was), but key difference to change between the copied build configuration is build for active architecture set to NO. After that a couple simple command line tools will do the rest!
xcodebuild -scheme YOUR_SCHEME -configuration SimRelease -sdk iphonesimulator8.1
Depending on where you have your DerivedData set you need to go find the outputted .app folder. Once you've found it you can simply install it on any simulator device. To find the device UUID's open Xcode and go to Window->Devices you'll see the list of the device instances and you can grab the UUID's. For a trivial script you could grab all of them from: ~/Library/Developer/CoreSimulator/Devices/ and install on every device.
From there the simple command to install on a device is:
xcrun simctl install DEVICE_ID APP_FOLDER_LOCATION
Here's a simple shell script to take the app and install it on every device:
app_dir=$1
current_dir=$(pwd)
cd ~/Library/Developer/CoreSimulator/Devices/
devices=$(ls -d */)
cd "$current_dir"
for device in $devices
do
device_id=${device%/}
xcrun simctl install "$device_id" "$app_dir"
done
Hope this helps! Took me a while to figure out the best way to do it.
Step to run in different simulator without any code repo :-
First create a .app by building your project(under project folder in Xcode) and paste it in a appropriate location (See pic for more clarity)
Download Xcode
Create a demo project and Start simulator in which you want to run the app.
Copy the .app file in particular location(ex :- Desktop).
cd Desktop and Run the command (xcrun simctl install booted appName.app),
App will be installed in the particular booted simulator.
Tested on iPod touch (7th generation) Simulator 13 (iOS 15.0)
Xcode and Xcode Command Line tools are already installed
Since we have an .ipa file, we can get the .app file from it
Rename .ipa file as .zip and extract the contents
Once the zip file is extracted, we can find the Payload folder which contains App_Name.app file
Open Terminal or iTerm2 app
Navigate to the folder which contains .app file
To list all iOS connected devices & iPhone simulators -> Also shows the UDID of all devices
xcrun xctrace list devices
Boot the simulator
xcrun simctl boot <UDID>
Launch the simulator
open -a simulator
Install the .app file
xcrun simctl install booted <App_Name>.app
Just drag and drop .app file to simulator it will install app automatically.
I have checked in iPhone simulator 13(iOS 15.4)