This question already has answers here:
Closed 10 years ago.
Possible Duplicate:
Why should I use #properties?
When to use properties in objective C?
I have been programming in objective-c for a little over a year now, and I always felt like it was a convention to use #property and #synthesize. But what purpose do they really serve ? Are they solely there to be communicated between classes ? So, for instance, if I use an NSMutableDictionary only in the scope of the class where it was declared, an omission is O.K. ?
Another question:
If I set the property of an NSMutableDictionary, it is retained, right ? So, in my class I don't have to call alloc() and init(), do I ?
What are the rules to use properties ?
But what purpose do they really serve?
Access control to iVars and abstraction between representation and underlying data.
Are they solely there to be communicated between classes?
No, they are for when you want to control access to iVars instead of accessing them directly or when you could in the future change underlying data structures but wish to keep the current representation.
So, for instance, if I use an NSMutableDictionary only in the scope of the class where it was declared, an omission is O.K.?
It depends. Do you want to have controlled access to the iVar? Would it be possible for your code to change so the dictionary is fetched and not a direct iVar. Usually, the answer is yes.
If I set the property of an NSMutableDictionary, it is retained, right?
Depends on how you declare the property.
So, in my class I don't have to call alloc() and init(), do I?
You have sloppy wording here. I think you are asking if you still need to construct an instance of a property. Yes, you will need to construct an instance of a property in some way. There are lots of ways of doing this.
NOTE: the convention for talking about methods is use their signature. Instead of alloc(), you would use -alloc.
What are the rules to use properties?
This you will need to read the doc for.
Like in another languages, when we want to make our variable global or public we use public access modifier. In objective c when we want access our another class variable in other class, we use #property and #synthesize them. Basically #synthesize is way by which compiler create a setter and getter methods for that variable. You can manually create them but not use #synthesize.
By creating object of that class you can access your property variable in other class.
By using retain, you clear that is take place memory and not exist until that container class not goes dispose or released.
Properties simply make your life easier.
Nowadays use properties as much as you can in terms of memory management, code-style and timesaving.
What do #propertys do?
They can create getter and setter methods (depends on given parameters).
Normally you declare instance variables in the header file (like in c++).
Now you simply let that be and instead of that declare the properties you want for instance variables.
Properties can get multiple arguments.
For normal objective-c objects, where you need a pointer (*) you would write.
#property (nonatomic,retain,...)
When you #synthesize it it creates a getter and a setter.
The setter automatically does stuff like releasing your old object, that your variable hold and retaining the new one.
So you don't have to do that manually (which should be quite often the case). Thats important.
You also can give it arguments (readonly,readwrite) to decide if to set a setter or not.
You can even declare a #property in the header file readonly and override that in your implementation file with a extension (a category with no name).
To dive deeper into this, read the apple developer manuals, which are quite effective.
Hope that helps a bit.
Shure it is the tip of the iceberg, but it's mostly everything you need.
Related
This question already has answers here:
Closed 10 years ago.
Possible Duplicate:
Is there any reason to declare ivars if you're using properties exclusively in Objective-C?
ObjectiveC ivars or #property
I am new to iPhone programming (and the programming scene altogether). I have tried to study about Properties at various places and found out that they are basically the shortcut to making getter and setter methods for other classes to get access to those objects.
Now, I have seen programmers define the object in the curly braces after the #interface:UIViewController as well as in the properties after that when all the accessing will happen within that class' .m file.
Now, that superfluous (?) piece of code, is it necessary? Is this a standard? Looking forward to some intelligible opinions.
Thank you in advance.
I can interpret your question in a number of ways:
Question: Why do some programmers use properties and instance variables (the variables defined within the curly braces), and others just use properties, and other just use instance variables?
Answer: As you know, #property declarations will, when you #synthesize them, will generate the getters and setters for you. Historically, this is all that it did for you and you had to also manually declare your instance variables. Later, the compiler was improved so that if you didn't have the instance variable defined, that the #synthesize statement would generate that, too. When this was first introduced, common practice was to define both the property and the instance variables, but Apple eventually shifted their guidelines and encouraged programmers to not define instance variables, but let the compiler generate that itself from the #property and #synthesize declarations.
So, in answer to your questions: 1. defining instance variables for your properties is now superfluous; 2. it is no longer necessary; and 3. it is now standard to not explicitly declare instance variables, but rather to let the #synthesize statement do that.
As an aside, the convention on the #synthesize statement is to, with an property called var, to precede the instance variable name with an underscore, thus #synthesize var = _var. This is done to minimize the chance that a programmer might accidentally refer to an ivar when the property was intended (or vice versa). To further illustrate that this is the preferred standard, starting in Xcode 4.4, even the #synthesize statement is optional (thus, define the #property, but no ivar, and no #synthesize) and it will declare and ivar the same name as your property, except with a leading underscore.
Question: Why do some programmers define some of their properties and instance variables in the .m file? Why do other programmers declare some of their instance variables and properties in the .h file when they're only being used within the class's own .m file.
Answer: Those instance variables and properties defined within the .m file (in what is called a class extension) are just a convenient way of defining those ivars/properties that are not advertised to the world. In this convention, your .h file becomes just your public interface (what properties and methods can be invoked from elsewhere) and everything else goes in the .m file. It's a nice way to keep your interfaces a little cleaner so when you go to use your class at some future date, you can just look at the .h file and not get too lost in the details of the class's implementation details.
In the past, before class extensions became prevalent, we defined all of our instance variables and properties in the .h file, even if they were private and used only within the class's own .m file. Thus, you'll still see some code that does this.
So, in answer to your questions, 1. it's not superfluous to use class extensions (unless your class extension is empty, but even then I tend to keep it so I can see that there are no private ivars/properties); 2. the use of class extensions is not necessary; but 3. the use of class extensions for private properties/variables that are used only within the class itself is an emerging standard and probably does represent best practice.
Working on iPhone, after a lot of headache and memory problems I just realized from other examples that we do not need to necessarly create #properties for each instance variable we define in header file. And actually I found out ivars easy to just allocate and release it after I use anywhere in the class, for #properties I have to use autorealese or I have serious problems and becareful how I allocate..
For instance for objects below, #properties(retain/copy..) is not used in headers in many examples;
{
NSURLConnection *connection;
NSMutableData *xmlData;
NsMutableString *string
}
But for some strings or object types #properties is used, I know that when we set #property cocoa creates some setters getters which are handling the relasing and retaining of the objects. But seems like as for xmlData or connection instance variables we do not need that and they do their job like this.
Are there some reference guidelines I can keep in mind on deciding whether or not to create #property's or just use simple ivars?
My only problem when using properties is not becuase I am lazy to define it, but when I carefully allocate and init them in code, I have to use autorelase and dont feel like I have the control when to release reset and allocate it again, and it gives me one more thing to worry about while and when and how should I release, reset it. I find ivars I can alloc and release anytime once anywhere easily without worrying about anything..or I am missing other things here.
Tnx
There seem to still be some misconceptions flying around about properties.
that we do not need to necessarly create #properties for each instance variable we define in header file
Correct. You can use private instance variables directly in your implementation file. However, since synthesized properties come with free memory management, you might as well take advantage. My rule of thumb is to use the ivar directly until the first time I find myself writing:
[ivar release];
ivar = [newIvar retain];
As Sam says, there is already a potential bug there if iVar == newIVar. This is the point at which I switch from using ivars directly to creating a property. However, I put the declaration of the new property in a class extension in the implementation file. This means that the property is officially not part of the public interface (and will cause compiler warnings if used accidentally).
when we set #property cocoa creates some setters getters which are handling the relasing and retaining of the objects.
Actually, no. The #property just declares a property. In order to automatically generate the getter and setter, you need to #synthesize it. You could, alternatively write your own getters and setter which do not even have to reference a real ivar.
Technically, you should not use the property in the init or dealloc methods because a subclass might have overridden them or (in dealloc) you might set off a KVO notification.
From Sam's answer and comments
If you want a property regardless, you could use a private interface at the top of the implementation file
As I say above, private categories have sort of been obsoleted by class extensions (which is near enough the same thing but allows you to put the implementation of the methods in the main class implementation).
If you want the benefits of using dot notation shorthand
Some of us would argue that there are no benefits to dot notation. It's a gratuitous and needless pollution of the struct member syntax. However, dot notation has no relation to #property declarations. You can use dot notation for any accessors no matter how they were declared, provided they adhere to the pattern -foo and and -setFoo:
Create properties only for variables that need to be accessed from outside the class. Any class variables that are used internally need not have getters/setters defined.
Generally speaking an abundance of properties indicates high coupling and poor encapsulation. You should restrict what variables your class exposes in the interface.
EDITED to respond to comment:
Using properties over direct access may be preferred because it gives you easy memory management.. for example:
// interface
#property (retain) Object *someVar;
// implementation
self.someVar = otherVar;
is the same as
// implementation
if (_someVar != othervar)
{
[_someVar release]
_someVar = [otherVar retain];
}
However you should not needlessly expose vars in your interface because it opens the class up for people to use in the wrong way.
If you want a property regardless, you could use a private interface at the top of the implementation file
#interface TheClass(Private)
// private stuff
#end
First of all, let me say that Sam's answer is complete, IMO, and gives you clear guidelines (+1 from me).
My only problem when using properties is not becuase I am lazy to define it, but when I carefully allocate and init them in code, I have to use autorelase and dont feel like I have the control when to release reset and allocate it again, and it gives me one more thing to worry about while and when and how should I release, reset it. I find ivars I can alloc and release anytime once anywhere easily without worrying about anything..or I am missing other things here.
You should not worry about autorelease in the following idiom:
self.stringProperty = [[[NSString alloc] initWith...] autorelease];
because this is the way that things are meant to work;
EDIT: [the above statement has several parts:
the object is allocated and initialized (retain count is 1);
immediately, the allocated object is also autoreleased; this means that the object will be released automatically, (more or less) when the control flow gets back to the main loop;
in the very same statement, the allocated object is assigned to a retained property, self.stringProperty; this has the effect of (once again) incrementing the retain count;
So, it is true that autorelease adds some "ambiguity", because the object will be released at a time that you don't know precisely (but pretty soon anyway), but assigning to the retain property will increase the retain count so that you have full control over the lifetime of the object.]
If you don't like the autorelease you can always use a constructor method which gives you back an autoreleased object, when available:
self.stringProperty = [NSString stringWith...];
or assign directly to the ivar:
stringProperty = [[[NSString alloc] initWith...] autorelease];
because by accessing directly the ivar you are bypassing the setter and getter. Anyway, do the it only in this case (IMHO) to avoid ambiguities.
More in general, the autorelease glitch is the only drawback that using properties has over directly accessing the ivars. The rest are, IMO, only advantages that in many cases will save your life, and if not your life, a leak or a crash.
There is nothing you cannot do with directly accessing the ivars and taking care of when it is necessary to release before assigning, or not forgetting to set to nil after releasing, etc., but properties will do that easier for you, so my suggestion is simply use them and accept the autorelease shortcoming. It's only a matter of getting the basic "idioms" right.
It has long been custom to access ivars directly. That is, IMO, fine from inside the same class, although many properties are classes and then properties provide protection against retain/release issues.
IMO, it is, however, preferrable to encapsulate most ivars into properties, especially those that have retain/release semantics, but also those that need special handling, i.e. for which you write your own handlers, instead of using the synthesized ones. That way you can filter access to certain ivars, or even create properties that don't have any backing storage, and are just "aliases" to other properties, e.g. an Angle class that has a degrees property giving the angle in degrees, and a radians property denoting the same angle in radians (this is a simple conversion), or a property that must do a dictionary search to find its value, etc.
In Delphi, which was (AFAICT) one of the first languages with properties as language construct at all, it is customary to wrap ALL ivars in properties (but not all have to be public), and there are many such "unreal" (I am deliberately avoiding the term "virtual" here) properties, i.e. the ones that are only implemented in code, and not just getters and setters for an ivar.
Properties provide encapsulation, abstraction and a degree of protection against certain often made errors, and that is why they are to be preferred over direct access to ivars, IMO.
Addition
It doesn't make sense to declare and implement (either via #synthesize or with custom setters and getters) public properties for each ivar. Only expose publicly what others may need. Internal state can also be exposed to your own code via properties, but that should be done with a private or empty category in the implementation file. That way you get the automatic handling of retain/release and still don't expose them to the public.
This question already has answers here:
Closed 11 years ago.
Possible Duplicate:
What describes #property(…) best? What's that actually good for?
If I declare a variable in my class interface, I can use such variable anywhere on my class. Awesome.
If I use #property (retain) Something *myVar; I can access that variable with self.myVar... But, what is the difference? Is there a good reason I should use one method or another?
Short answer: Encapsulation of memory management.
Longer answer: You need to establish ownership of an object if you want to use it later. If you want to use it later, you'll need a reference to it with which to do so, and a great place to keep that reference is in an instance variable.
You could handle the ownership claims (i.e. retains and releases) each time you assign a new value to that, but that would leave a lot of repetitious and trouble-prone boilerplate code scattered all over the place, like cherries in a fruitcake. That kind of mess is fiendishly difficult to debug when (not if) something goes wrong. So, it's far better to wrap that code up in accessor methods, so you can write it once and then forget about it.
But accessor methods are mostly boilerplate too, so we use #property declarations to create them automagically, rather than writing them by hand.
Edit: Apple's Memory Management Guide provides a lot of detail about what the accessor methods generated by #property do behind the scenes.
If I use #property (retain) Something *myVar; I can access that variable with self.myVar... But, what is the difference?
#property (retain) Something *myVar;
// this property declaration declares:
- (Something *)myVar;
// and
- (void)setMyIvar:(Something *)arg;
// and is accessible by dot syntax.
// it also declares and/or documents how the ivar is managed (copy, retain, etc.)
in use:
// direct access to the ivar. zero additional overhead (with regard to accessing the ivar)
[myVar message];
// properties used with dot syntax invoke the accessor. therefore,
[self.myVar message];
// is the same as:
[[self myVar] message];
the property's properties also give instructions to the compiler as to how to synthesize an accessor.
Is there a good reason I should use one method or another?
in init and dealloc, access the ivar directly - you are interested in initialization and cleanup of the object's ivars and do not care about subclasses. using properties here can also introduce bugs or undefined behavior.
for other cases, that is, when the object is in a fully constructed state, you should always use the accessor for consistency. if a subclass overrides an accessor, direct access of the ivar could break designs.
if you want to avoid this, then make the ivar private and do not declare a property for it. if you do declare a property for it, then document that it is private; i'll typically write #property (retain) Something * private_myIvar; in this case. in this case, it is convenient to use a property to synthseize the ivar's memory management.
when the ivar is private, you have total access to it. it is safe to access directly or by private property. otherwise, assume that you must use the accessor.
if myIvar is declared private and will be created only at initialization, you can avoid declaring the properties altogether. this will reduce runtime overhead (if that is critical). messaging overhead, retain/release cycles, and atomics will (naturally) require more execution time. so it can be bypassed to improve performance.
visibility/maintenance. sometimes, it's far less maintenance/implementation to hide an ivar from the interface. in other cases, the ivar is an implementation detail of the class, and should not be a part of the public interface. in such cases, consider making it private (there are a few ways to accoomplish this in objc).
Using the #property to access your ivars, does a lot of the repetitive code of releasing and retaining objects for you. You don't have to use them. It's just a lot of tutorials make it simple for people that are new to the platform.
In my code, every time I need a new object attribute for my class, I typically copy/paste its name in 4 different places!
The declaration in the header file (NSObject * myObject;)
The #property() line
The #synthesize() line in the implementation
Releasing it under dealloc: (only for objects of course)
I do this because it works, not because I completely understand what's going on. I do know that the declaration in the header file allows other classes to see its attributes, the property specifier determines how its getter/setter methods will be constructed. And the synthesize line actually builds those getter/setter methods. I also know that primitive types should use (nonatomic,assign) instead of (nonatomic,retain), but I have no clue when I should omit the nonatomic.
What can I do to avoid redundancy in my code. If I change or add a variable in my class I have to check 4 different places, and it gets old really fast. Are there any key strokes to make this process faster? Are there lines of code I can simplify or combine to obtain the same result?
Accessorizer will automate a lot of this for you.
In the latest version of Clang (Ships with XCode 4, not in XCode 3 yet) you get default #synthesize as well as default ivar creation. The default ivar creation already works, but not on the simulator. With both of these features all you need to do is add the #property line and deal with the memory management in dealloc
As far as nonatomic vs atomic. atomic is the default, and what happens when you leave off the nonatomic annotation. Atomic guarantees that the value is completely set before allowing anything to access it, nonatomic doesn't. Atomic is only useful in threading situations, and is slightly slower in singlethreaded applications.
It's important to understand what each of those lines of code does. They are not all the same and they are not necessarily redundant. One thing that will help is to use the correct terminology — for example, with NSObject *myObject; you're probably referring to an instance variable declaration.
First and foremost, a #property declaration in an #interface lets you say that instances of a class expose a piece of state. It doesn't say much about the implementation of that state, only that it's exposed by instances of your class and the API contract (memory management, atomicity, methods) for the state.
The #synthesize directive tells the compiler to create or use a specific instance variable as storage for a declared #property. This does not need to be how you provide storage for a property. For example, Core Data provides its own storage for modeled properties, so you use #dynamic for those instead. You also don't need to use an instance variable with the same name as your #property — to extend your example above, you might name your instance variable myObject_ while naming your property object and that's perfectly fine.
Finally, you send the instance variable -release in -dealloc — for an object-type property marked retain or copy — because you've said you'll manage its memory. You're not releasing the property, you're releasing the storage. If you implemented the storage some other way, you'd clean it up some other way.
I'm diving into iOS development and I find that for each of my UI controls, I always just blindly declare their #property like so, since that's how it was done in some tutorial I read when I started learning...
#property (retain, nonatomic) IBOutlet UILabel *lblStatus;
I'm still getting familiar with these attribute types and what they mean, but I find these two attributes allow me to accomplish my goals. Would I ever want to use any #property attributes other than "retain" and "nonatomic" for UI variables?
Thanks in advance for all your help!
NOTE: This answer is more relevant to UI Items in general.
Yes there is other situation where you would want to use the "assign" macro instead of "retain" (Assign is default for now but you get warning at compile-time if you don't specify it explicitly)
Apple gives a good example of this on one of their tutorial: Advanced UITableViewCell
They only "assign" in order to avoid cycle retains. (each of the view retains the other so they can't be deallocated).
NOTE: I missed the reference to UI variables in the question, so this answer is a more general discussion.
Yes, you will definitely need to use other attributes than those two, although that combination is the most common one.
copy - Use this in situations where you don't want as subsequent change to the data to be "picked up" by your class. In other words, when you want full control of the data once it's passed in. Sometimes this is desirable, sometimes not. Classes like NSString and UIColor are often used through properties with the copy attribute. My answer here gives a little bit more background.
assign - You use this with primitive types like int. You can't retain or copy an int or a float, because they are not objects, so you have to use assign. (Also, you don't have to, and can't, release those variables in your dealloc method.) This is true also for C structs, which are not covered by the Objective-C retain count system.
assign special case - sometimes you use assign even with objects, because you want to avoid retain cycles. Look at the header for UITableViewfor example. You'll notice that the delegate property is declared like this: #property(nonatomic, assign) id<UITableViewDelegate> delegate . Delegate properties should always be declared with assign and the same applies in some other situations, although you are not likely to run into them very soon.
nonatomic - This tells the compiler that the property is intended only to be accessed from one thread, and therefore it can omit some code that would otherwise slow down your program (potentially considerably). So the rule here is: if the property will, or might, be accessed from several threads, you should not declare it to be nonatomic (atomic is the default). Note however that making properties atomic is in no way sufficient to make your code thread safe. That's another, and much much thornier, topic.
The answer is NO. The reason behind this is the reason why we are using nonatomic and retain. From memory management guide "Objects in the nib file are created with a retain count of 1 and then autoreleased. As it rebuilds the object hierarchy, UIKit reestablishes connections between the objects using setValue:forKey:, which uses the available setter method or retains the object by default if no setter method is available. This means that (assuming you follow the pattern shown in “Outlets”) any object for which you have an outlet remains valid." So we are providing this setter just to make a match with the default behavior. Yes, it is possible to declare the setter in other ways but at least I have not found no reason to do so. If we use assign instead of retain, then there is no guarantee that the objects will remain valid. And memory management is already critical in iPhone and obviously I don't want to make it further critical by ignoring the convention. -- edit The answer NO is only for UI variables, that is for IBOutlets. Don't be confused. Other attributes are necessary in other cases as explained in other answers.
(retain) is generally used for instance variables and assign will go for delegates and primitive data types like bool , int