I have a problem to pass parameter to dataset. My report is following:
MAIN REPORT query:
select distinct id_satellite from report.t_tmp_report_param where id_session = $P{id_session} order by id_satellite
(id_satellite is integer)
this query extracts at least two values: (i.e.) 3 and 4. I need these values to build details band (in this case 2 bands).
DATASET query:
select cn0 as x, elevation as y from mytable where id_satellite = ????
I should replace the question marks with the value extracted from MAIN REPORT query, and so before 3 and after 4.
How can I fix this problem?
Thanks for reply. My problem is on XY Line Chart, because, jasper builds two detail band, but in the two graphs, there is only one satellite (last satellite, in my example=4). I have in detail band a table too. The values on table are correct. It's very strange...
I've only tried it with subreports. But this article describes the solution to your question.
Related
I am trying to convert an old Microsoft Access report into Crystal reports. I have everything working perfectly except for this last small detail. The Access report uses a DSUM function within an if statement for one of the fields on the report.
After much searching, I've determined that CR doesn't have anything similar.
Here's basically what I'm dealing with.
I have a proposal report. In the details of the report I print the qty, description, and a couple of price fields.
The data looks like something this:
Proposalnum Partitem RolltoItem Unitprice
18611.............1.......... NULL........0.00
18611.............2......... NULL.......17225.92
18611............3............ 2............156.90
18611............4............. 2............482.05
What I need to do is when I print a specific part, I need to query through the rest of the records to find the parts that have a matching number in the rolltoitem field and add the unitprice to the part I'm printing.
So in this example when I print partitem #2, I need to add the 156.90 and the 482.05 from parts 3 and 4 to the 17225.92 so I print a total of 17864.87.
Is there any way to do this?
As far as i know, there is no such function.
But I would try this.
The general idea is: group the data by ProposalNum and use a subreport to select the "children rows" and sum the "children prices".
Details:
Create an empty group section by PartItem.
If you want to show only items where RoolToItem is null, use a suppress function for this case.
In the details section, put a subreport. The data source of the subreport would be the same of the main report.
Change subreport links to select data in subreport based on fields: PartItem in the main report = RolltoItem in the subreport.
Pass other fields to the subreport without select data: ProposalNum, PartItem, UnitPrice. I think you need to create parameters in the subreports before doing that - example: ParentProposalNum, ParentPartItem, ParentUnitPrice.
Create a new formula: ParentUnitPrice + Sum ({YourDataSource.UnitPrice})
Put the formula in the subreport footer a long with the other fields. Maybe: ParentProposalNum, ParentPartItem, formula.
It is a theoretical solution. I hope it points out to the right direction.
If you are trying to sum the Unitprice column for all items that have the same value in Rolltoitem, you could do this with a SQL Expression Field. The code would look something like this. My Where clause may need tweaked though since I'm not sure what your database structure looks like.
(
Select Sum("YourDataBaseTableName"."Unitprice")
From YourDataBaseTableName
Where "YourDataBaseTableName"."Rolltoitem" = *currentRolltoitemValue*
)
Syntax can also vary for SQL Expression Fields based upon what type of database you are using. The syntax I provided is fairly general, but should work on SQL Server.
EDIT: Adding example with explanation of how it works.
Here is one of my SQL Expression Fields from a crystal report that prints a Bill of Lading for shipped goods.
(
Select Sum("SHIPMENTS"."PALLET_COUNT")
From SHIPMENTS
Where "SHIPMENTS"."BOL_ID" = "BOL"."ID"
)
In my database the BOL table is the starting point. A single BOL can contain 1 or more SHIPMENTS, and a single SHIPMENTS can contain one or more PRODUCTS.
Top level grouping is on BOL.ID. The PALLET_COUNT is found once and only once on each SHIPMENTS. I also had a sorting requirement for the data in the details section that prevented me from using a Running Total Field.
This allows a BOL with 2 SHIPMENTS that contains a total of 3 products to look like this:
BOL.ID SHIPMENTS.ID SHIPMENTS.BOL_ID PALLET_COUNT PRODUCT.ID
1 10 1 2 XXX
1 9 1 1 YYY
1 10 1 2 ZZZ
The correct PALLET_COUNT for this BOL should be 3, since PRODUCTS XXX and ZZZ are in the same SHIPMENTS and the PALLET_COUNT is duplicated because of its relationship to the PRODUCTS.
I want to create a report like
in crystal report cross tab.
The Table has the following data .
I can get the report with three expected columns like SELF, 50% and 75%.
and their output look like
But my requirement is to use Increases and NPCalculated Columns under Main Column as mentioned in pic 1 above.
Note: I used the NPCalculated in Summarized Fields but It gives me out like NPCalculated Value comes under Increases Value but It should be side by side as per my requirement.
First I add NPCalculated column in Summarized field and now I have two summarized fields. Next, right-click one of the summary cells > Summarized Field lables > Summarize horizontally.
I'm using Crystal Reports XI (R2) and have a cross-tab which displays information about flights. There is the 'Total' column' as well as the Arrivals and Departures columns which are created automatically thanks to the grouping condition. What I'm trying to do is to have the 'flight directions' parameter, where the user can select 'All, departures only or arrivals only' values and according to this selection the cross-tab would have one or two columns. How can this be achieved? I tried using the following formula(and have the suppress empty columns option enabled) :
if {?Pm-#flight_direction_description} = "Departures Only"
then
if ({Command_1.IsArrival} = 1)
then 0
else {Command_1.IsArrival}
which indeed works (only one column is displayed) but then under the Departures column it lists all the flights (so the departures column is the same as the Total column) whereas it should only display information about departing flights.
I've had similar situations come up; while certainly not ideal, and if no one has any better suggestions, you could create Detail A, Detail B and Detail C sections, all of them suppressed. From there...
You could put your "All" crosstab in Detail A
Create a second crosstab for Destinations only, and put that in Detail B
Create a third crosstab for Arrivals only, and put that in Detail C
Then, in your Detail A, B and C sections, you can condtionally unsuppress the section you want based on the parameter passed in.
Below, I've attached a sample of my data as well as a sample of the chart output. I want to aggregate the data and include one row with this number; however, SSRS is just showing multiple of the same value.
In the example below, you'll notice there are 8 rows in Unit 1 and 8 rows in Unit 2, a
total of 13. How can I get Unit 1 to have one row which shows 8 and one row in Unit 2 to show 5? Currently, the expression is =COUNT(Fields!SubID.Value, "DataSet1").
I've also tried adding in a column full of the number 1 which I could use to Sum on, but that produced the same results.
Originally I was doing this all in SQL; that is, producing the exact output I want in SQL and then charting in SSRS. However, this is no longer a viable solution as the end user would like to be able to drill down into the details of the report. I do imagine, if there is no easy way to do this (which I feel like there has to be), that I could write two queries, having one show the report and the other show the details.
Thanks.
The second parameter of your count expression is the problem.
Don't use this:
=COUNT(Fields!SubID.Value, "DataSet1")
Try something like this instead:
=COUNT(Fields!SubID.Value, "UnitGroupName")
The group name should match what is shown in BIDS as the name you've given the grouping, such as under Row Groups.
This seems to be a very simple question, but I am trying to get the 2nd value in a dataset to display as a matrix's header value.
In this report, lets say that I have 2 datasets. In Dataset1, I have a query that pulls down 3 values for a parameter dropdown selection. In Dataset2, I return a result set and have bound it to my matrix.
Within the matrix, I have my repeating columns, and then 3 additional grouped columns to the right that have aggrigate values that I want to display. On the header of those 3 columns, I want to display the 3 values displayed in my Parameters dataset. Within the context of the matrix (and its dataset), I can get the first and last values of a different dataset (Dataset1 in this case) by using:
=First(Fields!DateDisplay.Value, "Dataset1")
=Last(Fields!DateDisplay.Value, "Dataset1")
I need to get something like:
=Second(Fields!DateDisplay.Value, "Dataset1")
How do I pull this off without violating the scoping rules on aggregate columns?
For SSRS 2008 R2, you can do this if each row of your dataset has an identifier column by using the LookUp() function.
=LookUp(1,Fields!Row.Value,Fields!DateDisplay.Value,”Dataset1”)
=LookUp(2,Fields!Row.Value,Fields!DateDisplay.Value,”Dataset1”)
=LookUp(3,Fields!Row.Value,Fields!DateDisplay.Value,”Dataset1”)
If you do not have an identifier column you can use ROW_NUMBER() to build one in.
Query:
SELECT ROW_NUMBER() OVER(ORDER BY DateDisplay) AS Row, DateDisplay
FROM Dates
Results:
Row DateDisplay
--- ---------
1 June 1st
2 March 12th
3 November 15th
Here is a link to a similar thread in MSDN Forums: Nth row element in a dataset SSRS
If you are using SSRS-2012 or 2014 then one has to use below expression.
=LookUp(AnyRowNumber, Fields!RowNumber.Value,Fields!DisplayField.Value,”DatasetName”)
I have tried above it was not working in my case.