Hi In my app Intially i loaded a view from app delegate. Next when some button click on this root view I added this code.
-(IBAction)method
{
View1 *v1=[[View1 alloc] init];
CGRect frame = CGRectMake(0.0f, 100.0f, 320.0f, 250.0f);
v1.view.frame=frame;
hideView = [[UIView alloc] initWithFrame: CGRectMake(0,0,320,480)];
hideView.backgroundColor = [UIColor blackColor];
hideView.alpha =0.8;
[hideView addSubview:v1.view];
[self.view addSubview:hideView];
}
In above code View1 is another view controller and hide view is just a view in root view controller. Now totally for Root view controller two views are added. Now my question is i want to remove the two added subviews from Root view when i clicked on table cell. how to do this? And also when i added this sub views to root view scrolling also not possible to table view and saying bad access error how to resolve this? Or any other ways to do this.
You can set unique tag to any view (subview) to easily retrieve reference to them later.
In your case, for example, you can add following lines:
v1.tag = 10112;
hideView = 10113;
And get references to that views later you can type:
//view - is a root view of that subviews
View1 *v1 = [view viewWithTag:10112];
UIView *hideView = [view viewWithTag:10113];
// and now you are able to remove them:
[v1 removeFromSuperview];
[hideView removeFromSuperview];
If View1 is inside hideView, so you can just call [hideView removeFromSuperView]; to remove both, or just use the #Nekto solution to recognize the view you want to remove.
For the scrolling issue, it's normal that if you add a view on top of the UITableView you're going to loss the table's scrolling, you could look at hitTest method of UIView.
Related
I am new to iPad developer,
I made one Registration form in my application, when i see my application in Portrait mode,
i am able to see whole form with no scrolling, but when i see same form in Landscape mode, i am not able to see part which is at bottom of page, for that a scrolling should be there to see bottom part.
:
In my .h file when i replace
#interface ReminderPage : UIViewController{
...
...
}
:UIViewController with :UIScrollView
and then when i add label in my .m file like this,
UILabel *Lastpaidlbl = [[[UILabel alloc] initWithFrame:CGRectMake(70 ,400, 130, 50)]autorelease];
Lastpaidlbl.backgroundColor = [UIColor greenColor];
Lastpaidlbl.font=[UIFont systemFontOfSize:20];
Lastpaidlbl.text = #"Lastpaid on :";
[self.view addSubview:Lastpaidlbl];
I am getting error on last line Property view not found on object of type classname.
i am unable to add label in my view.
Any help will be appreciated.
The question appears to be really asking how can all the components on the screen be placed inside a UIScrollView, rather than a UIView. Using Xcode 4.6.3, I found I could achieve this by simply:
In Interface Builder, select all the sub-views inside the main UIView.
Choose Xcode menu item "Editor | Embed In | Scroll View".
The end result was a new scroll view embedded in the existing main UIView, will all the former sub-views of the UIView now as sub-views of the UIScrollView, with the same positioning.
If you want to replace your UIViewController with a UIScrollView, you will have to go a bit of refactoring to your code. The error you get is just an example of that:
the syntax:
[self.view addSubview:Lastpaidlbl];
is correct if self is a UIViewController; since you changed it to be UIScrollView, you should now do:
[self addSubview:Lastpaidlbl];
You will have quite a few changes like this one to make to your code and will face some issues.
Another approach would be this:
instantiate a UIScrollView (not derive from it);
add your UIView (such as you have defined it) to the scroll view;
define the contentSize of the scroll view so to include the whole UIView you have.
The scroll view acts as a container for your existing view (you add your controls to the scroll view, then add the scroll view to self.view); this way, you could integrate it within your existing controller:
1. UIScrollView* scrollView = <alloc/init>
2. [self.view addSubview:scrollView]; (in your controller)
3. [scrollView addSubview:<label>]; (for all of your labels and fields).
4. scrollView.contentSize = xxx;
I think the latter approach will be much easier.
Please put all of your UIComponents to the UIScrollview and then it will start scrolling.
please look in to content size. please change it according to the orientation of device.
You're subclassing UIScrollView, so there is no self.view because already self is the view (of the scrollview). You dont need to subclass the scrollview, you can just embed your components in a ivar scrollview and set its contentSize (in your case, you have to enable the scrolling just when the device is in landscape mode). In interface builder you can embed the selected elements in one click, Editor-> Embed in-> scrollview.
First create scrollview
UIScrollView * scr=[[UIScrollView alloc] initWithFrame:CGRectMake(10, 70, 756, 1000)];
scr.backgroundColor=[UIColor clearColor];
[ self.view addSubview:scr];
second
change [self.view addSubview:Lastpaidlbl];
to
[scr addSubview:Lastpaidlbl];
third
set height depends on content
UIView *view = nil;
NSArray *subviews = [scr subviews];
CGFloat curXLoc = 0;
for (view in subviews)
{
CGRect frame = view.frame;
curXLoc += (frame.size.height);
}
// set the content size so it can be scrollable
[scr setContentSize:CGSizeMake(756, curXLoc)];
Finally
- (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation {
// Override to allow orientations other than the default portrait orientation.
if (interfaceOrientation==UIInterfaceOrientationLandscapeLeft || interfaceOrientation==UIInterfaceOrientationLandscapeRight) {
self.scr.frame = CGRectMake(0, 0, 703,768);
} else {
self.scr.frame = CGRectMake(0, 0, 768, 1024);
}
return YES;
}
I'm about to add a UIScrollView to my iPhone project and before I implement this functionality I wanted to check if my approach is the right one or if I could be violating some best practice I'm not aware of.
The tutorials I've seen generally involve adding a UIScrollView to an existing UIView and they work from there. However, I was wondering if I could spare the UIView altogether and just add the UIScrollView as the only top-level object in my nib file.
My sample project uses Xcode's View-based Application template:
Project navigator http://img542.imageshack.us/img542/5364/projectnavigator.png
I deleted the UIView top-level object from the original MySampleViewController.xib file and replaced it by adding a UIScrollView object:
Nib placeholders http://img526.imageshack.us/img526/7709/placeholderobjects.png
Now my nib file only shows this object in the canvas:
Canvas http://img233.imageshack.us/img233/4063/scrollview.png
Then I created the link from the UIViewController's view outlet to the UIScrollView.
Now, if I wanted to programmatically manipulate the contents of the UIScrollView I can use this code:
- (void)viewDidLoad {
[super viewDidLoad];
NSArray *colors = [NSArray arrayWithObjects:[UIColor redColor], [UIColor greenColor], [UIColor blueColor], nil];
// Solution B: With the following line we avoid creating an extra outlet linking to the UIScrollView top-level object in the nib file
UIScrollView *scrollView = (UIScrollView *)self.view;
for (int i = 0; i < colors.count; i++) {
CGRect frame;
//frame.origin.x = self.scroller.frame.size.width * i; // Solution A: scroller is an IBOutlet UIScrollView *scroller;
frame.origin.x = scrollView.frame.size.width * i; // Solution B
frame.origin.y = 0;
//frame.size = self.scroller.frame.size; // Solution A
frame.size = scrollView.frame.size; // Solution B
UIView *subView = [[UIView alloc] initWithFrame:frame];
subView.backgroundColor = [colors objectAtIndex:i];
//[self.scroller addSubview:subView]; // Solution A
[self.view addSubview:subView]; // Solution B
[subView release];
}
//self.scroller.contentSize = CGSizeMake(self.scroller.frame.size.width * colors.count, self.scroller.frame.size.height); // Solution A
scrollView.contentSize = CGSizeMake(scrollView.frame.size.width * colors.count, scrollView.frame.size.height); // Solution B
}
In order to implement Solution A the scroller outlet must be linked to the nib's UIScrollView as well, and the Connections Inspector looks like this:
Connections Inspector http://img228.imageshack.us/img228/8397/connectionsj.png
Solution A requires an outlet and this means having two connections to the UIScrollView: the UIViewController's own view outlet and MySampleViewController's scroller outlet. Is it legal and/or recommended to have two outlets pointing to the same view?
Solution B only involves UIViewController's view outlet linking to the view, and using this line:
UIScrollView *scrollView = (UIScrollView *)self.view;
My questions:
Do I incur in some sort of violation of Apple's design guidelines by using one of these two solutions?
Should I stick to the UIScrollView within a UIView solution?
Is there any other way to implement this?
Thanks!
P.S. Sorry for the syntax highlight, SO didn't recognize the use of the 'objective-c' tag
No I think you are fine either way.
I would, I don't think a UIView has any significant cost, plus what if you want to add a page control? and you don't have to cast the controller's view to a UIScrollView every time you need it.
Looks like you have it under control to me.
Solution A requires an outlet and this means having two connections to the UIScrollView: the UIViewController's own view outlet and MySampleViewController's scroller outlet. Is it legal and/or recommended to have two outlets pointing to the same view?
It standard to have IBOutlets to any view defined in your .nib that you want to access directly from your view controller.
If you don't want two outlets you could give the scroll view a tag then find it like so:
UIScrollView *myScrollView = (UIScrollView *)[self.view viewWithTag:1]
Then you only have the view as an outlet, but I would just add the extra outlet. Just make sure you set them to nil in your viewDidUnload.
Also you don't have to retain the scroll view (if you are even still using retain/release). Since the scroll view is inside your view controller's view it keeps a reference so you can have your scrollview's property by assign or week if your using ARC.
Hope that helps.
I'm using a UISegmentedControl as the headerview of a tableview. Now I want to add loading view (a view defined by myself) only covering the table cells but not my headerview. How do I achieve this?
You can add this view to the cell you want:
UITableViewCell *cell = [self tableView:self.tableView cellForRowAtIndexPath:indexPathOfCell];
[cell addSubview:view];
The simplest way to add the loading view would be like this
// get the frame of your table header view
CGRect headerFrame = headerView.frame;
// construct a frame that is the screen minus the space for your header
CGRect loadingFrame = [[UIScreen mainScreen] applicationFrame];
loadingFrame.origin.y += headerFrame.size.height;
loadingFrame.size.height -= headerFrame.size.height;
// use that frame to create your loading view
MyLoadingView *loadingView = [[MyLoadingView alloc] initWithFrame:loadingFrame];
// add your view to the window *
[[headerView window] addSubview:loadingView];
* Adding the view to the window may not be the best thing for your design, but since I don't know any of the details of your view hierarchy, this is the way that will always work.
Caution: If you do not cover up the segmented control, and it is enabled, the user may click on it and change the state of the app when you aren't expecting it - like when you're trying to load something for them. Be sure that you can cancel this loading view if the user changes the state of the app.
Apple's tab bar controller has a lot of limitations. One important limitation is that you can't modify the tab bar in a rejection safe mode. My tab bar has a simple sliding movements and it's multi row.
For those reasons I decided to build a TBVC from the beginning; everything seems to work correctly, but I'm really messing around with rotation. Every time that I change orientation main view frames are changed.
Here is my hierarchy from top to the container view:
-MainView--contains-->TabBarView+containerView
The containerView is the view used to contain views loaded from the other controllers.
Here is the -loadView method of my CustomTabBaViewController
- (void)loadView
{
UIView *theView=[[UIView alloc]initWithFrame:[[UIScreen mainScreen]bounds]];
theView.autoresizingMask=UIViewAutoresizingFlexibleHeight | UIViewAutoresizingFlexibleWidth;
theView.backgroundColor=[UIColor greenColor];
containerOfControllersView=[[UIView alloc] initWithFrame:theView.bounds];
containerOfControllersView.backgroundColor=[UIColor blueColor];
containerOfControllersView.autoresizingMask=UIViewAutoresizingFlexibleHeight | UIViewAutoresizingFlexibleWidth;
[theView addSubview:containerOfControllersView];
ideoloTabBar=[[IdeoloTabBar alloc]initWithNumberOfControllers:[controllers count]];
[theView addSubview:ideoloTabBar];
self.view=theView;
[theView release];
}
When I set a new view from another controller I use this method:
-(void)setCurrentViewWithView:(UIView*)theView{
if ([[self.containerOfControllersView subviews] count]>0) {
UIView *tagView=[self.containerOfControllersView viewWithTag:555];
tagView.tag=0;
[tagView removeFromSuperview];
}
theView.tag=555;
theView.autoresizingMask=UIViewAutoresizingFlexibleHeight | UIViewAutoresizingFlexibleWidth;
theView.frame=[[UIScreen mainScreen]applicationFrame];
[self.containerOfControllersView addSubview:theView];
[self.view bringSubviewToFront:ideoloTabBar];
}
As you can see the views from other view controllers are applied using the applicationFrame.
When I rotate the device happens something wrong, the mainview not only is resized according to the new orientation but also moved by 20px (status bar size) to the botton, thus leaving a gap between the status bar and the container view. Since I gave the mainview the screen bounds I can't understand with it should be moved.
UPDATE
I'm trying a different approach so I've modified the loadView like that:
- (void)loadView
{
[super loadView];
containerOfControllersView=[[UIView alloc] initWithFrame:self.view.bounds];
containerOfControllersView.backgroundColor=[UIColor blueColor];
containerOfControllersView.autoresizingMask=UIViewAutoresizingFlexibleHeight | UIViewAutoresizingFlexibleWidth;
self.view.backgroundColor=[UIColor greenColor];
[self.view addSubview:containerOfControllersView];
ideoloTabBar=[[IdeoloTabBar alloc]initWithNumberOfControllers:[controllers count]];
[self.view addSubview:ideoloTabBar];
}
And in the setCurrentViewWithView:(UIView*)theView I've modified the line with
theView.frame=self.view.bounds;
instead of using the applicationFrame.
NOW:
On iPhone when I try to load a modalView it cuts about 40px at the bottom
On iPad when I try to load a modalView it lefts 20px at the bottom, because 20px are under the status bar but wantsFullScreen is NO.
UPDATE 2
It seems that the presentModalViewController should be called from the root view controller. I will create a protocol and an abstract UIViewController subclass to implement it an load it correctly.
Any suggestion? work around?
I don't like the approach of creating an entirely custom TabBarController from scratch. I like to put a custom view on top of a real TabBar as a subview, and then pass all the button presses to the real TabBarController. This way you don't have to code a window manager yourself.
- (void)tabButtonPressed:(id)sender
{
UIButton *button = (UIButton *)sender;
if (button.tag == HomeButton)
self.tabBarController.selectedIndex = 0;
// etc.
}
This should also be rejection safe.
This has been addressed here: Application frame leaves blank line at the top
But, you could also specify your frame by subtracting 20 from y:
CGRect rect = [[UIScreen mainScreen] applicationFrame];
theView.frame = CGRectMake(rect.origin.x, rect.origin.y - 20, rect.size.width, rect.size.height);
It has been a while since I'm using my custom TabBarViewController with disappearing tabbar and it seems to work properly both on iPad and iPhone.
The main problem that I had was due to an incorrect assignment to the content view frame and probably to a wrong assumption that modalVC were loaded from the current view controller.
First point: the content view should use the bounds of the main view, here is a part of the loadView method of the Root View Controller:
[super loadView];
containerOfControllersView=[[UIView alloc] initWithFrame:self.view.bounds];
Second:before add as a subview a view of a view controller remark to it that its frame should have the same bounds of its new parent view.
theView.frame =self.view.bounds;
Third: modal view controllers should be loaded from the root view controller or the will never have correct size. That's why I've implemented a base abstract class for each view controllers that inherit a protocol that manage the presetation and dismissing of modal viewcontrollers.
Hope this helps someone else.
Andrea
I'm trying to do something that shouldn't be that complicated, but I can't figure it out.
I have a UIViewController displaying a UITableView. I want to present a context menu when the user press on a row. I want this to be a semi-transparent view with labels and buttons.
I could use an AlertView, but I want full control on the format of the labels and buttons and will like to use Interface Builder.
So I created my small view 250x290, set the alpha to .75 and create a view controller with the outlets to handle the different user events.
Now I want to present it.
If I use presentModalViewController two (undesired) things happen
1) the view covers all of the screen (but the status bar).
2) It is semi-transparent, but what I see "behind" it its not the parent view but the applications root view.
Ive tried adding it as a subview, but nothing happens, so Im not doing something right:
RestaurantContextVC* modalViewController = [[[RestaurantContextVC alloc] initWithNibName:#"RestaurantContextView" bundle:nil] autorelease];
[self.view addSubview:modalViewController.view];
Is it possible to do what I want?
Thanks in advance.
Gonso
I'm coding similar thing. My approach include.....
Not using dismissModalViewControllerAnimated and presentModalViewController:animated.
Design a customized full sized view in IB. In its viewDidLoad message body, set the background color to clearColor, so that space on the view not covered by controllers are transparent.
I put a UIImageView under the controllers of the floating view. The UIImageView contains a photoshoped image, which has rounded corners and the background is set to transparent. This image view serves as the container.
I uses CoreAnimation to present/dismiss the floating view in the modal view style: (the FloatingViewController.m)
- (void)viewDidLoad
{
[super viewDidLoad];
[self.view setBackgroundColor:[UIColor clearColor]];
[UIView beginAnimations:nil context:nil];
[self.view setFrame:CGRectMake(0, 480, 320, 480)];
[UIView setAnimationDuration:0.75f];
[self.view setFrame:CGRectMake(0, 0, 320, 480)];
[UIView commitAnimations];
}
wangii
Thats pretty much the solution I found.
I load the view with loadNibNamed and then just add it on top with addSubView, like this:
//Show a view on top of current view with a wait indicator. This prevents all user interactions.
-(void) showWaitView{
NSArray* nibViews = [[NSBundle mainBundle] loadNibNamed:#"WaitView" owner:self options:nil];
#ifdef __IPHONE_2_1
waitView = [ nibViews objectAtIndex: 0];
#else
waitView = [ nibViews objectAtIndex: 1];
#endif
CGFloat x = self.view.center.x - (waitView.frame.size.width / 2);
CGFloat y = self.view.center.y - (waitView.frame.size.height / 2);
[waitView setFrame:CGRectMake(x,y,waitView.bounds.size.width,waitView.bounds.size.height)];
[self.view addSubview:waitView];
}
Could you elaborate on points 3 and 4?
What I did to give the view the round rect aspect is put it inside a round rect button.
This code will actually allow you to have a small floating view, but if the view is smaller that its parent, the user could interact with the visible part of the parent.
In the end I create my view with the same size, but kept the code just in case.
Gonso
I would strongly consider using a navigation controller to slide in your subview instead of overlaying it. This is the expected model and any small benefit you may think you'll get by doing it your own way will be greatly offset by the principle of (least) surprise.
If you really really have to do it this way, I believe the trick is to add the first table view as a subview of a transparent "holding" view that the view controller maintains. Then add your new sub view as another subview of that.
Again, if you really want to do this, instead of adding a transparent "holding" view, since this pop-up is essentially modal, I would make it a subview directly of the window.
You might want to put in a transparent black shield behind it to prevent touches on the background and focus input on the popup.
But seriously, consider either popping a controller on the stack or using that alert view. Unless you've hired a $$ designer, it's probably not going to look appropriate on the iPhone.
What I did was create a UIViewController on top of my UINavigation controller in my app delegate and made it a property of a singleton object for convenience:
- (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions {
//--- create root navigation controller
self.window.rootViewController = self.navigationController;
//--- create view controller for popups:
popupViewController = [[BaseViewController alloc] init];
popupViewController.view.backgroundColor = [UIColor clearColor];
popupViewController.view.hidden = true; //for rendering optimisation
[self.window addSubview:popupViewController.view];
[AppState sharedInstance].popupViewController = self.popupViewController;
//--- make all visible:
[self.window makeKeyAndVisible];
return YES;
}
At any point in my app, I can then call e.g.
MyViewController * myVC = [[UIViewController alloc] init];
//... set up viewcontroller and its view...
// add the view of the created view controller to the popup view:
[AppState sharedInstance].popupViewController.view.hidden = false;
[[AppState sharedInstance].popupViewController.view addSubview:myVC.view];
The BaseViewController used on the top just inherits from UIViewController and sets up a full-screen view:
//----- in BaseViewController implementation
- (void)loadView {
//------- create root view:
CGRect frame = [[AppState sharedInstance] getScreenFrame];
rootView = [[VCView alloc] initWithFrame:frame];
rootView.backgroundColor = [UIColor whiteColor];
self.view = rootView;
}