So in a UITableView when you have sections the section view sticks to the top until the next section overlaps it and then it replaces it on top. I want to have a similar effect, where basically I have a UIView in my UIScrollView, representing the sections UIView and when it hits the top.. I want it to stay in there and not get carried up. How do I do this? I think this needs to be done in either layoutSubviews or scrollViewDidScroll and do a manipulation on the UIVIew..
To create UIView in UIScrollView stick to the top when scrolled up do:
func createHeaderView(_ headerView: UIView?) {
self.headerView = headerView
headerViewInitialY = self.headerView.frame.origin.y
scrollView.addSubview(self.headerView)
scrollView.delegate = self
}
func scrollViewDidScroll(_ scrollView: UIScrollView) {
let headerFrame = headerView.frame
headerFrame.origin.y = CGFloat(max(headerViewInitialY, scrollView.contentOffset.y))
headerView.frame = headerFrame
}
Swift Solution based on EVYA's response:
var navigationBarOriginalOffset : CGFloat?
override func viewWillAppear(animated: Bool) {
super.viewWillAppear(animated)
navigationBarOriginalOffset = navigationBar.frame.origin.y
}
func scrollViewDidScroll(scrollView: UIScrollView) {
navigationBar.frame.origin.y = max(navigationBarOriginalOffset!, scrollView.contentOffset.y)
}
If I recall correctly, the 2010 WWDC ScrollView presentation discusses precisely how to keep a view in a fixed position while other elements scroll around it. Watch the video and you should have a clear-cut approach to implement.
It's essentially updating frames based on scrollViewDidScroll callbacks (although memory is a bit hazy on the finer points).
Evya's solution works really well, however if you use Auto Layout, you should do something like this (The Auto Layout syntax is written in Masonry, but you get the idea.):
- (void)scrollViewDidScroll:(UIScrollView *)scrollView {
//Make the header view sticky to the top.
[self.headerView mas_remakeConstraints:^(MASConstraintMaker *make) {
make.top.equalTo(self.scrollView.mas_top).with.offset(scrollView.contentOffset.y);
make.left.equalTo(self.scrollView.mas_left);
make.right.equalTo(self.scrollView.mas_right);
make.height.equalTo(#(headerViewHeight));
}];
[self.scrollView bringSubviewToFront:self.headerView];
}
Related
I'm working with NSCollectionView and want to implant paging logic (loading additional content). For that I want to know when user have scrolled to bottom of collection view, because I used to add this approach in iOS apps. How I can do that? Or maybe I need to work with NSScrollView or NSClipView?
Maybe CollectioView have ScrollView delegate method.
Try this:
var lastOffsetY: CGFloat = 0
override func scrollViewDidScroll(_ scrollView: UIScrollView) {
if scrollView.contentOffset.y == (scrollView.contentSize.height - scrollView.frame.size.height) {
loadMore()
}
}
I need to do this app that has a weird configuration.
As shown in the next image, the main view is a UIScrollView. Then inside it should have a UIPageView, and each page of the PageView should have a UITableView.
I've done all this so far. But my problem is that I want the scrolling to behave naturally.
The next is what I mean naturally. Currently when I scroll on one of the UITableViews, it scrolls the tableview (not the scrollview). But I want it to scroll the ScrollView unless the scrollview cannot scroll cause it got to its top or bottom (In that case I'd like it to scroll the tableview).
For example, let's say my scrollview is currently scrolled to the top. Then I put my finger over the tableview (of the current page being shown) and start scrolling down. I this case, I want the scrollview to scroll (no the tableview). If I keep scrolling down my scrollview and it reaches the bottom, if I remove my finger from the display and put it back over the tebleview and scroll down again, I want my tableview to scroll down now because the scrollview reached its bottom and it's not able to keep scrolling.
Do you guys have any idea about how to implement this scrolling?
I'm REALLY lost with this. Any help will be greatly appreciate it :(
Thanks!
The solution to simultaneously handling the scroll view and the table view revolves around the UIScrollViewDelegate. Therefore, have your view controller conform to that protocol:
class ViewController: UIViewController, UIScrollViewDelegate {
I’ll represent the scroll view and table view as outlets:
#IBOutlet weak var scrollView: UIScrollView!
#IBOutlet weak var tableView: UITableView!
We’ll also need to track the height of the scroll view content as well as the screen height. You’ll see why later.
let screenHeight = UIScreen.mainScreen().bounds.height
let scrollViewContentHeight = 1200 as CGFloat
A little configuration is needed in viewDidLoad::
override func viewDidLoad() {
super.viewDidLoad()
scrollView.contentSize = CGSizeMake(scrollViewContentWidth, scrollViewContentHeight)
scrollView.delegate = self
tableView.delegate = self
scrollView.bounces = false
tableView.bounces = false
tableView.scrollEnabled = false
}
where I’ve turned off bouncing to keep things simple. The key settings are the delegates for the scroll view and the table view and having the table view scrolling being turned off at first.
These are necessary so that the scrollViewDidScroll: delegate method can handle reaching the bottom of the scroll view and reaching the top of the table view. Here is that method:
func scrollViewDidScroll(scrollView: UIScrollView) {
let yOffset = scrollView.contentOffset.y
if scrollView == self.scrollView {
if yOffset >= scrollViewContentHeight - screenHeight {
scrollView.scrollEnabled = false
tableView.scrollEnabled = true
}
}
if scrollView == self.tableView {
if yOffset <= 0 {
self.scrollView.scrollEnabled = true
self.tableView.scrollEnabled = false
}
}
}
What the delegate method is doing is detecting when the scroll view has reached its bottom. When that has happened the table view can be scrolled. It is also detecting when the table view reaches the top where the scroll view is re-enabled.
I created a GIF to demonstrate the results:
Modified Daniel's answer to make it more efficient and bug free.
#IBOutlet weak var scrollView: UIScrollView!
#IBOutlet weak var tableView: UITableView!
#IBOutlet weak var tableHeight: NSLayoutConstraint!
override func viewDidLoad() {
super.viewDidLoad()
//Set table height to cover entire view
//if navigation bar is not translucent, reduce navigation bar height from view height
tableHeight.constant = self.view.frame.height-64
self.tableView.isScrollEnabled = false
//no need to write following if checked in storyboard
self.scrollView.bounces = false
self.tableView.bounces = true
}
func tableView(_ tableView: UITableView, numberOfRowsInSection section: Int) -> Int {
return 20
}
func tableView(_ tableView: UITableView, viewForHeaderInSection section: Int) -> UIView? {
let label = UILabel(frame: CGRect(x: 0, y: 0, width: tableView.frame.width, height: 30))
label.text = "Section 1"
label.textAlignment = .center
label.backgroundColor = .yellow
return label
}
func tableView(_ tableView: UITableView, cellForRowAt indexPath: IndexPath) -> UITableViewCell {
let cell = tableView.dequeueReusableCell(withIdentifier: "cell", for: indexPath)
cell.textLabel?.text = "Row: \(indexPath.row+1)"
return cell
}
func scrollViewDidScroll(_ scrollView: UIScrollView) {
if scrollView == self.scrollView {
tableView.isScrollEnabled = (self.scrollView.contentOffset.y >= 200)
}
if scrollView == self.tableView {
self.tableView.isScrollEnabled = (tableView.contentOffset.y > 0)
}
}
Complete project can be seen here:
https://gitlab.com/vineetks/TableScroll.git
After many trials and errors, this is what worked best for me. The solution has to solve two needs 1) determine who's scrolling property should be used; tableView or scrollView? 2) make sure that the tableView doesn't give authority to the scrollView until it has reached the top of it's table/content.
In order to see if the scrollview should be used for scrolling vs the tableview, i checked to see if the UIView right above my tableview was within frame. If the UIView is within frame, it's safe to say the scrollView should have authority to scroll. If the UIView is not within frame, that means that the tableView is taking up the entire window, and therefor should have authority to scroll.
func scrollViewDidScroll(_ scrollView: UIScrollView) {
if scrollView.bounds.intersects(UIView.frame) == true {
//the UIView is within frame, use the UIScrollView's scrolling.
if tableView.contentOffset.y == 0 {
//tableViews content is at the top of the tableView.
tableView.isUserInteractionEnabled = false
tableView.resignFirstResponder()
print("using scrollView scroll")
} else {
//UIView is in frame, but the tableView still has more content to scroll before resigning its scrolling over to ScrollView.
tableView.isUserInteractionEnabled = true
scrollView.resignFirstResponder()
print("using tableView scroll")
}
} else {
//UIView is not in frame. Use tableViews scroll.
tableView.isUserInteractionEnabled = true
scrollView.resignFirstResponder()
print("using tableView scroll")
}
}
hope this helps someone!
None of the answers here worked perfectly for me. Each one had it's owned nuanced problem (needing to do a repeated swipe when one scrollview hit it's bottom, or the scroll indicator not looking correct, etc), so figured I'd throw in another answer.
Ole Begemann has a great write up on doing this exactly https://oleb.net/blog/2014/05/scrollviews-inside-scrollviews/
Despite being an old post, the concepts still apply to the current APIs. Additionally, there is a maintained (Xcode 9 compatible) Objective-C implementation of his approach https://github.com/eyeem/OLEContainerScrollView
If you are facing problem with the nested scrolling issue , here tis the simplest solution for it .
go to your design screen
select your scroll view and then disable bounce on scroll
if your view uses table view inside scroll view then disable bounce on scroll of the table view as well
run and check it is solved
check how to disable bounce on scroll of a scroll view
check how to disable bounce on scroll of a tableview view
I was struggling with this problem, too. There is a very simple solution.
In interface builder:
create simple ViewController
add a simple View, it will be our header, and constrain it to superview
it's the red view on the example below
I have added 12px from top, left and right, and set fixed height to 128px
embed a PageViewController, making sure it is constrained to the superview, and not the header
Now, here comes the fun part: for each page you add, make sure its tableView has an offset from top. Thats it. You can do if with this code, for example (assuming you use UITableViewController as a page):
override func viewDidLayoutSubviews() {
super.viewDidLayoutSubviews()
let tables = viewControllers.compactMap { $0 as? UITableViewController }
tables.forEach {
$0.tableView.contentInset = UIEdgeInsets(top: headerView.bounds.height, left: 0, bottom: 0, right: 0)
$0.tableView.contentOffset = CGPoint(x: 0, y: -headerView.bounds.height)
}
}
No messy scroll inside scroll inside table view, no mangling with delegates, no duplicated scrolls, perfectly natural behavior. If you can't see the header, it is probably because of the tableView background color. You have to set it to clear, for the header to be visible from under the tableView.
I think there are two options.
Since you know the size of the scroll view and the main view, you are unable to tell whether the scroll view hit the bottom or not.
if (scrollView.contentOffset.y >= (scrollView.contentSize.height - scrollView.frame.size.height)) {
// reach bottom
}
So when it hit; you basically set
[contentScrollView setScrollEnabled:NO];
and other way around for your tableView.
The other thing, which is more precise I think, is to add Gesture to your views.
UITapGestureRecognizer *tapRecognizer = [[UITapGestureRecognizer alloc]
initWithTarget:self action:#selector(respondToTapGesture:)];
// Specify that the gesture must be a single tap
tapRecognizer.numberOfTapsRequired = 1;
// Add the tap gesture recognizer to the view
[self.view addGestureRecognizer:tapRecognizer];
// Do any additional setup after loading the view, typically from a nib
So when you add Gesture, you can simply control the active view by changing setScrollEnabled in the respondToTapGesture.
I found an awesome library
MXParallaxHeader
In Storyboard just set UIScrollView class to MXScrollView then magic happens.
I used this class to handle my UIScrollView when I embed a UIPageViewController container view. even you can insert a parallax header view for more detail.
Also, this library provides Cocoapods and Carthage
I attached an image below which represent UIViewHierarchy.
MXScrollView Hierarchy
SWIFT 5
I had some trouble using Vineet's answer for when I could not guarantee the scrollView content offset (Y) due to various different screen sizes. To resolve this, I changed the first trigger event of when the tableView's scroll gets enabled.
func scrollViewDidScroll(_ scrollView: UIScrollView) {
if scrollView.bounds.contains(button.frame) {
tableView.isScrollEnabled = true
}
if scrollView == tableView {
self.tableView.isScrollEnabled = (tableView.contentOffset.y > 0)
}
}
The scrollView.bounds.contains will check if a given element's frame is FULLY within the scrollView's visible content. I set this to a button that I have below the tableView. You could set this to your tableVIew's frame instead if your only condition is that your tableView is fully visible.
I left the original implementation of when to disable the tableView's scroll and it works very well.
I tried the solution marked as the correct answer, but it was not working properly. The user need to click two times on the table view for scroll and after that I was not able to scroll the entire screen again. So I just applied the following code in viewDidLoad():
tableView.addGestureRecognizer(UISwipeGestureRecognizer(target: self, action: #selector(tableViewSwiped)))
scrollView.addGestureRecognizer(UISwipeGestureRecognizer(target: self, action: #selector(scrollViewSwiped)))
And the code below is the implementation of the actions:
func tableViewSwiped(){
scrollView.isScrollEnabled = false
tableView.isScrollEnabled = true
}
func scrollViewSwiped(){
scrollView.isScrollEnabled = true
tableView.isScrollEnabled = false
}
One easy trick, if you want to achieve it is replacing parent scrollview with normal container view.
Adding a pan gesture on container view, you can play with top constraint of first view to assign negative values. You can keep a check of page View's origin if it achieves to top you can start assigning that value on content offset of the pageView's child view. Until user achieves the table view in a state of top most view in container view, you can keep page tableView's scrolling disabled and allow scrolling manually by setting content offset.
So initially the page view height will be collapsed (or say out of screen) or less at bottom. Later on scrolling down it will expand to take more space.
Gesture will automatically stop responding if out of frames say on nav bar or other view outside container view.
Gestures are a key to user interactive transitions used in many apps. You can mimic scroll for a certain time with it.
In my case I'm using constraint for height like that:
self.heightTableViewConstraint.constant = self.tableView.contentSize.height
self.scrollView.contentInset.bottom = self.tableView.contentSize.height
Below code works great for me
As I wanted to show some header after some scroll and table view supposed to scroll
And in ViewDidLoad add
override func viewDidLoad() {
super.viewDidLoad()
mainScrollView.delegate = self
}
Change 265 to whatever number you want to stop upper scroll
extension AccountViewController: UIScrollViewDelegate {
func scrollViewDidScroll(_ scrollView: UIScrollView) {
print(notebookTableView.contentOffset.y)
if notebookTableView.contentOffset.y < 265 {
if notebookTableView.contentOffset.y > 0 {
mainScrollView.setContentOffset(notebookTableView.contentOffset, animated: false)
} else {
mainScrollView.setContentOffset(CGPoint(x: 0.0, y: 0.0), animated: false)
}
} else {
mainScrollView.setContentOffset(CGPoint(x: 0.0, y: 265), animated: false)
}
}
}
CGFloat tableHeight = 0.0f;
YourArray =[response valueForKey:#"result"];
tableHeight = 0.0f;
for (int i = 0; i < [YourArray count]; i ++) {
tableHeight += [self tableView:self.aTableviewDoc heightForRowAtIndexPath:[NSIndexPath indexPathForRow:i inSection:0]];
}
self.aTableviewDoc.frame = CGRectMake(self.aTableviewDoc.frame.origin.x, self.aTableviewDoc.frame.origin.y, self.aTableviewDoc.frame.size.width, tableHeight);
Maybe brute-force, but working perfectly if cell heights are the same: by the way, I use auto layout.
for the tableView (or collectionView or whatever), set an arbitrary height in storyboard, and make an outlet to class. Wherever appropriate, (viewDidLoad() or...) set the tableView's height big enough so that tableView doesn't need to scroll. (need to know the number of rows in advance) Then only the outer scrollView will scroll nicely.
I have a TableViewController:
As you see I have my own custom bar at the top.
The UITable View is just a static one, and I add a view at the top of UITableView.
The thing is when I scroll the TableView to top-side it become like bellow image, and I don't want it. is there any easy code that I can limit the scroll for the tableView?
since UITableView is a subclass of UIScrollView you can use this UIScrollViewDelegate method to forbid scrolling above the top border
- (void)scrollViewDidScroll:(UIScrollView *)scrollView {
if (scrollView == self.tableView) {
if (scrollView.contentOffset.y < 0) {
scrollView.contentOffset = CGPointZero;
}
}
}
Yo will need to set the bounce property of the uitableview to NO
UITableView *tableView;
tableView.bounces = NO;
Edit: Note also you can uncheck the bounces from interface builder too
Please check this answer for further details Disable UITableView vertical bounces when scrolling
I had the same problem and asked our UX-Designer, how it would be better to do. He said, that both strict solutions (prevent bouncing or allow it as it is) are bad. It's better to allow bouncing but only for some space
My solution was:
override func scrollViewDidScroll(_ scrollView: UIScrollView) {
if scrollView == self.tableView {
if scrollView.contentOffset.y < -64 {
scrollView.scrollRectToVisible(CGRect(origin: CGPoint(x: 0, y: -64), size: scrollView.frame.size), animated: false)
scrollView.scrollRectToVisible(CGRect(origin: CGPoint.zero, size: scrollView.frame.size), animated: true)
}
}
}
Where 64 was that "some space" for me. Code stops tableView at -64 from the top and brings it up with an animation.
Good luck!
If i understand correctly you have set-up your custom bar as part of your tableview. Put your custom bar in a separate view not in the tableview and put your tableview below custom bar when you are setting up your views. You need to create your custom view controller that will have your custom bar and your static table view.
You need to create your view controller object as type UIViewController and not UITableViewController. Then add the custom bar as a subview to self.view. Create a separate UITableView and add it below the custom bar. That should make custom bar static and table view scrollable.
Update:
In order to make the tableview static you need to set it as
tableView.scrollEnabled = NO:
Let me know if this works for you.
Swift version of Mattias's answer:
func scrollViewDidScroll(_ scrollView: UIScrollView) {
if (scrollView == self.ordersTable) {
if (scrollView.contentOffset.y < 0) {
scrollView.contentOffset = CGPoint.zero;
}
}
}
What is the easiest and most elegant way to check if a UIView is visible on the current UIScrollView's contentView? There are two ways to do this, one is involving the contentOffset.y position of the UIScrollView and the other way is to convert the rect area?
If you're trying to work out if a view has been scrolled on screen, try this:
CGRect thePosition = myView.frame;
CGRect container = CGRectMake(scrollView.contentOffset.x, scrollView.contentOffset.y, scrollView.frame.size.width, scrollView.frame.size.height);
if(CGRectIntersectsRect(thePosition, container))
{
// This view has been scrolled on screen
}
Swift 5: in case that you want to trigger an event that checks that the entire UIView is visible in the scroll view:
extension ViewController: UIScrollViewDelegate {
func scrollViewDidScroll(_ scrollView: UIScrollView) {
if scrollView.bounds.contains(targetView.frame) {
// entire UIView is visible in scroll view
}
}
}
Implement scrollViewDidScroll: in your scroll view delegate and calculate manually which views are visible (e.g. by checking if CGRectIntersectsRect(scrollView.bounds, subview.frame) returns true.
updated for swift 3
var rect1: CGRect!
// initialize rect1 to the relevant subview
if rect1.frame.intersects(CGRect(origin: scrollView.contentOffset, size: scrollView.frame.size)) {
// the view is visible
}
I think your ideas are correct. if it was me i would do it as following:
//scrollView is the main scroll view
//mainview is scrollview.superview
//view is the view inside the scroll view
CGRect viewRect = view.frame;
CGRect mainRect = mainView.frame;
if(CGRectIntersectsRect(mainRect, viewRect))
{
//view is visible
}
José's solution didn't quite work for me, it was detecting my view before it came on screen. The following intersects code works perfect in my tableview if José's simpler solution doesn't work for you.
func scrollViewDidScroll(_ scrollView: UIScrollView) {
let viewFrame = scrollView.convert(targetView.bounds, from: targetView)
if viewFrame.intersects(scrollView.bounds) {
// targetView is visible
}
else {
// targetView is not visible
}
}
Solution that takes into account insets
public extension UIScrollView {
/// Returns `adjustedContentInset` on iOS >= 11 and `contentInset` on iOS < 11.
var fullContentInsets: UIEdgeInsets {
if #available(iOS 11.0, *) {
return adjustedContentInset
} else {
return contentInset
}
}
/// Visible content frame. Equal to bounds without insets.
var visibleContentFrame: CGRect {
bounds.inset(by: fullContentInsets)
}
}
if scrollView.visibleContentFrame.contains(view) {
// View is fully visible even if there are overlaying views
}
How would I make two scroll views follow each others scrolling?
For instance, I have a scroll view (A) on the left of a screen, whose contents can scroll up and down, but not left and right. Scroll view B matches the up and down of A, but can also scroll left and right. Scroll view A is always on the screen.
-----------------------------------------------------------
| | |
| | |
| | |
| A | B |
| | |
| scrolls | |
| up & down | scrolls all directions |
| | |
-----------------------------------------------------------
How would I make it so the the up and down scrolling (of either view) also makes the other view scroll in the same up-down direction? Or is there another method to do this?
Set the delegate of scroll view A to be your view controller... then have...
- (void)scrollViewDidScroll:(UIScrollView *)scrollView {
CGPoint offset = scrollViewB.contentOffset;
offset.y = scrollViewA.contentOffset.y;
[scrollViewB setContentOffset:offset];
}
If you want both to follow each other, then set delegate for both of them and use...
- (void)scrollViewDidScroll:(UIScrollView *)scrollView {
if([scrollView isEqual:scrollViewA]) {
CGPoint offset = scrollViewB.contentOffset;
offset.y = scrollViewA.contentOffset.y;
[scrollViewB setContentOffset:offset];
} else {
CGPoint offset = scrollViewA.contentOffset;
offset.y = scrollViewB.contentOffset.y;
[scrollViewA setContentOffset:offset];
}
}
The above can be refactored to have a method which takes in two scrollviews and matches one to the other.
- (void)matchScrollView:(UIScrollView *)first toScrollView:(UIScrollView *)second {
CGPoint offset = first.contentOffset;
offset.y = second.contentOffset.y;
[first setContentOffset:offset];
}
- (void)scrollViewDidScroll:(UIScrollView *)scrollView {
if([scrollView isEqual:scrollViewA]) {
[self matchScrollView:scrollViewB toScrollView:scrollViewA];
} else {
[self matchScrollView:scrollViewA toScrollView:scrollViewB];
}
}
Swift 3 Version:
func scrollViewDidScroll(_ scrollView: UIScrollView) {
if scrollView == scrollViewA {
self.synchronizeScrollView(scrollViewB, toScrollView: scrollViewA)
}
else if scrollView == scrollViewB {
self.synchronizeScrollView(scrollViewA, toScrollView: scrollViewB)
}
}
func synchronizeScrollView(_ scrollViewToScroll: UIScrollView, toScrollView scrolledView: UIScrollView) {
var offset = scrollViewToScroll.contentOffset
offset.y = scrolledView.contentOffset.y
scrollViewToScroll.setContentOffset(offset, animated: false)
}
I tried the Simon Lee's answer on iOS 11. It worked but not very well. The two scroll views was synchronized, but using his method, the scroll views would lost the inertia effect(when it continue to scroll after you release your finger) and the bouncing effect. I think it was due to the fact that setting the contentOffset through setContentOffset(offset, animated: false) method causes cyclic calls of the scrollViewDidScroll(_ scrollView: UIScrollView) delegate's method(see this question)
Here is the solution that worked for me on iOS 11:
// implement UIScrollViewDelegate method
func scrollViewDidScroll(_ scrollView: UIScrollView) {
if scrollView == self.scrollViewA {
self.syncScrollView(self.scrollViewB, toScrollView: self.scrollViewA)
}
else if scrollView == self.scrollViewB {
self.syncScrollView(self.scrollViewA, toScrollView: scrollViewB)
}
}
func syncScrollView(_ scrollViewToScroll: UIScrollView, toScrollView scrolledView: UIScrollView) {
var scrollBounds = scrollViewToScroll.bounds
scrollBounds.origin.y = scrolledView.contentOffset.y
scrollViewToScroll.bounds = scrollBounds
}
So instead of setting contentOffset we are using bounds property to sync the other scrollView with the one that was scrolled by the user. This way the delegate method scrollViewDidScroll(_ scrollView: UIScrollView) is not called cyclically and the scrolling happens very smooth and with inertia and bouncing effects as with a single scroll view.
Swift 5.4 // Xcode 13.1
What has worked flawlessly for me was the following:
Create a custom subclass of UIScrollView
Conform to UIGestureRecognizer delegate
Override the gestureRecognizer(_:shouldRecognizeSimultaneouslyWith:) GestureRecognizerDelegate method
public func gestureRecognizer(_ gestureRecognizer: UIGestureRecognizer, shouldRecognizeSimultaneouslyWith otherGestureRecognizer: UIGestureRecognizer) -> Bool {
return true
}
Both collection views need to have the same superview. Add both gesture recognizers to your superview
yourSuperview.addGestureRecognizer(scrollView1.panGestureRecognizer)
yourSuperview.addGestureRecognizer(scrollView2.panGestureRecognizer)
Hope this helps!
Guys i know the question is answered, but decided to share with you here my approach for solving a similar issue that i had, because i believe it is a pretty clean solution. Basically i had to make three collection views scroll together, and what i did, is i made a custom UICollectionView subclass called SharedOffsetCollectionView, that when you set this class to a collection view in storyboards or you instantiate it from code directly, you can have all instances scroll the same.
So with SharedOffsetCollectionView all collection view instances of this class in your app, will scroll the same always. In my opinion it is a clean solution because it requires adding zero logic in your view controllers, it is all contained in this external class, you just have to set the class of your collection view to be SharedOffsetCollectionView and you are done.
The same approach could easily be transferred to UITableViews and UIScrollViews
Hope that is helpful to some you. :)
My solution is written in:
Swift 5.2, XCode 11.4.1
The answer above all did not quite work our for me, since I run into a cyclic call of scrollViewDidScroll. This happend, because setting the content offset of a scroll view also calls scrollViewDidScoll. I solved it by putting a lock between it, which is set based on if a scroll view is being dragged by the user or not, so the syncing won't happen by setting the content offset:
func scrollViewDidScroll(_ scrollView: UIScrollView) {
self.synchronizeScrollView(offSet: scrollView.contentOffset.y,
scrollViewAIsScrolling: scrollView == scrollViewA,
isScroller: scrollView.isDragging)
}
private enum Scroller {
case page, time
}
private var scroller: Scroller? = nil
func synchronizeScrollView(offSet: CGFloat, scrollViewAIsScrolling: Bool,
isScroller: scrollView.isDragging) {
let scrollViewToScroll = scrollViewAIsScrolling ? scrollViewB : scrollViewA
var offset = scrollViewToScroll.contentOffset
offset.y = offSet
scrollViewToScroll.setContentOffset(offset, animated: false)
}
This code can be refactored based on how many scroll views are used and based on who owns them. I won't recommend having one controller being the delegate of many scroll views. I would rather solve it with delegation.