ThreadX is considered a RTOS.
I know general definitions and requirements of an RTOS, however, could anyone help to shed some light on why ThreadX can be called an RTOS, or, what features of the OS make it realtime capable?
Thanks~
When programmers talk about real-time operating systems they often mention features that relate to managing multiple processes or threads: mutexes, semaphores and interprocess (or interthread) communications etc.
However the true definition is that the system must guarantee that some given operations will always happen within a known, deterministic time (i.e. time in seconds, not in relative terms). Neither Linux or Windows are truly real time. A Linux or Windows computer can be so blazing fast that whatever you want done will almost always happen fast enough - but there is no guarantee that it will always be within a maximum time. If you are building a software system to control a medical device or a huge piece of factory equipment, then you need to stop or start something in x-milliseconds, not "soon", or "usually fast enough".
Now in practice, to provide this guarantee in a useful, non-trivial system one often needs pre-emptive multitasking, multiple threads and all the features usually mentioned, so you would be hard pressed to find an RTOS without them. However, the defining characteristic of an RTOS is right in the name: things can be known to happen in a real amount of time.
As to your specific question, from the ThreadX web site:
ThreadX is deteriminstic. A high priority thread starts responding to
an external event on the order of the time it takes to perform a
highly optimized ThreadX context switch.
- Boot time: 300 cycles
- Context switch time: <100 cycles
- Semaphore get: 30 cycles
What it all means is that your response time is deterministic.
This is one of the most important things you want in an RTOS.
In threadx your threads have a priority. The operating system is driven by a hardware interrupt timer and the scheduler ensures that the threads are scheduled correctly according to their priority.
For example, if thread A (high priority) is waiting on a semaphore and thread B (low priority) is running, then as as soon as the semaphore becomes available then thread B will be interrupted and thread A will be started.
Threadx has a number of other features to optimize the context switching time.
For example, each thread has its own stack.
For more detail you should get this: http://www.amazon.com/Real-Time-Embedded-Multithreading-Using-ThreadX/dp/1578201349/ref=sr_1_2?s=books&ie=UTF8&qid=1390859108&sr=1-2&keywords=real+time+threadx
Not an expert but, When you impose time constraints on application threads/processes it is called real-time software.
In RTOS, if high priority thread comes then low priority thread will be suspended until high priority thread is finished (or go into to idle/suspended state). Low priority thread will never get time (event time slice is enabled) until any high priority thread is active.
In case of same thread priority, if time slice is enabled then each thread will get specific amount of time.
You should also check priority inversion in RTOS case.
ThreadX will have the same response time no matter the size of the system: if the system has one thread or many, one semaphore or many, etc the response time will be the same. All operations have constant response times. Thread preemption time is bounded and constant. Interrupt response time is bounded and constant. The level of capabilities that ThreadX offers is sometimes described in academic literature as "hard real-time".
Related
Do the family of sleep functions (sleep(), nanosleep()) cause timer interrupts once they complete (i.e., are done sleeping)? If not, how does the OS know exactly when they are done? If so, I understand timers have a high interrupt priority. Does this mean a program using sleep() once awoken will likely cause another program running on one of the CPUs (in a multi-processor) to be removed in favor of the recently awoken program?
Does the sleep() function cause a timer interrupt upon completion?
Maybe.
For keeping track of time delays there's 2 common ways it could be implemented:
a) A timer IRQ occurs at a fixed frequency (e.g. maybe every 1 millisecond). When the IRQ occurs the OS checks if any time delays expired and deals with them. In this case there's a compromise between precision and overhead (to get better precision you need to increase the "IRQs per second" which increases the overhead of dealing with all the IRQs).
b) The OS re-configures the timer to generate an IRQ when the soonest delay should expire whenever necessary (when the soonest delay is cancelled, a sooner delay is created, or the soonest delay expires). This has no "precision vs. overhead" compromise, but has more overhead for re-configuring the timer hardware. This is typically called "tickless" (as there's no regular/fixed frequency "tick").
Note that modern 80x86 systems have a local APIC timer per CPU that supports "IRQ on TSC deadline". For "tickless", this means you can normally get better than 1 nanosecond precision without much need for locks (using "per CPU" structures to keep track of time delays); and the cost of re-configuring the timer is very small (as the timer hardware is built directly into the CPU itself).
For "tickless" (which is likely much better for modern systems) you would end up with a timer IRQ when "sleep()" expires most of the time (unless some other delay expires at the same/similar time).
Does this mean a program using sleep() once awoken will likely cause another program running on one of the CPUs (in a multi-processor) to be removed in favor of the recently awoken program?
Whether a recently unblocked task preempts immediately depends on:
a) The scheduler design. For some schedulers (e.g. naive "round robin") it may never happen immediately.
b) The priorities of the unblocked task and the currently running task/s.
c) Optimizations. Task switches cost overhead so attempts to minimize the number of task switches (e.g. postponing/skipping a task switch if some other task switch is likely to happen soon anyway) are practical. There's also complexity involving load balancing, power management, cache efficiency, memory (NUMA, etc) and other things that may be considered.
The Linux man pages notes:
Portability notes
On some systems, sleep() may be implemented using alarm(2) and SIGALRM (POSIX.1 permits
this); mixing calls to alarm(2) and sleep() is a bad idea.
I'm working on a wheeled-robot platform. My team is implementing some algorithms on MCU to
keep getting sensors reading (sonar array, IR array, motor encoders, IMU)
receive user command (via a serial port connected to a tablet)
control actuators (motors) to execute user commands.
keep sending sensor readings to the tablet for more complicated algorithms.
We currently implement everything inside a global while-loop, while I know most of the other use-cases do the very same things with a real-time operating system.
Please tell me the benefits and reasons to use a real-time os instead of a simple while-loop.
Thanks.
The RTOS will provide priority based preemption. If your code is off parsing a serial command and executing it, it can't respond to anything else until it returns to your beastly loop. An RTOS will provide the abstractions needed for an instant context switch based on an interrupt event. Otherwise the worst-case latency of an event response is going to be that of the longest possible excursion out of the main loop, and sometimes you really do need long-running processes. Such as, for example, to update an LCD panel or respond to USB device enumeration. Preemption permits you to go off and do these things safe in the knowledge that a 16-bit timer running at the CPU clock isn't going to roll over several times before it's done. While for simple control jobs a loop is sufficient, the problem starting with it is when you get into something like USB device enumeration it's no longer practical and will need a full rewrite. By starting with a preemptive framework like an RTOS provides, you have a lot more future flexibility. But there's definitely a bit more up-front work, and definitely a learning curve.
"Real Time" OS ensures your task periodicity. If you want to read sensors data precisely at every 100msec, simple while loop will not guarantee that. On other hand, RTOS can easily take care of that.
RTOS gives you predictibility. An operation will be executed at given time and it will not be missed.
RTOS gives you Semaphores/Mutex so that your memory will not be corrupted or multiple sources will not access buffers.
RTOS provides message queues which can be useful for communication between tasks.
Yes, you can implement all these features in While loop, but then that's the advantage! You get everything ready and tested.
If your while loop works (i.e. it fulfills the real-time requirements of your system), and it's robust, maintainable, and somewhat extensible, then there probably is no benefit to using a real-time operating system.
But if your while-loop can't fulfill the real-time requirements or is overly complex or over-extended (i.e., any change requires further tuning and tweaking to restore real-time performance), then you should consider another architecture.
An RTOS architecture is one popular next step beyond the super-loop. An RTOS is basically a tool for managing software complexity. It allows you to divide a complex set of software requirements into multiple threads of execution. When done properly, each individual thread has a relatively simple set of requirements and becomes easier to implement. And thread prioritization can make it easier to fulfill the real-time requirements of the application. These are basically the benefits of employing an RTOS.
An RTOS is not a panacea, however. An RTOS increases the overall system complexity and opens you up to new types of bugs (such as deadlocks). It requires knowledge and experience to design and implement an RTOS based program effectively. Consider alternatives such as Multi-Rate Main Loop Tasking or an event-based state machine architecture (such as QP). These alternatives might be simpler, easier to understand, or more compatible with your way of designing software.
There are a couple huge advantage that a RTOS multitasker has:
Very good I/O performance: an RTOS can set a waiting thread ready as soon as an I/O action that it requested has completed, so latency in handling reads/writes/whatever can be low. A looped, polled design cannot respond to I/O completions until it gets round to checking the I/O status, (either directly or my polling some volatile flag set by an interrupt-handler).
Indpendent functionality: The ease of implementing isolated subsystems for serial comms, actuators etc. may well be one for you, as suggested in the other answers. It's very reassuring to know that any extra delay in, say some serial exchange, will not adversely affect timing elsewhere. You need to wait a second? No problem: sleep(1000) and you're done - no effect on the other subsystems:) It's the difference between 'no, I cannot add a network server, it would change all the timing and I would have to retest everything' and 'sure, there's plenty of CPU free, I already have the code from another job and I just need another thread to run it'.
There ae other advanatges that help offset the added annoyance of having to program a preemptive multitasker with its critical sections, semaphores and condvars.
Obviously, if your hardware has multiple cores, the RTOS helps - it is designed to share out available CPU execution cycles just like any other resource, and adding cores means more cycles.
In the end, though, it's the I/O performance and functional isolation that's the big win.
Some of the suggestions in other answers may help, either instead of, or together with, an RTOS. When controlling multiple I/O hardware, eg. sensors and actuators, an event-driven state-machine is a very good idea indeed. I often implement that by queueing all events into one thread, (producer-consumer queue), that has sole access to the state data and implements the state-machine, so serializing actions.
Whether the advantages are worth the candle is between you and your requirements:)
RTOS is not instead of while loop - it is while loop + tools which organize your tasks. How do they organize your tasks? Assign priorities to them, decide how much time each one have for a job and/or at what time it should start/end. RTOS also layers your software, i.e harwdare related stuff, application tasks, etc. Aside of that gives you data structures, containers, ready to use interfaces to handle common tasks so you don't have to implement your own i.e allocate some memory for you, lock access for some resources and so on.
I am working with time-critical applications where the microsecond counts. I am interested to a more convenient way to develop my applications using a non bare-metal approach (some kind of framework or base foundation common to all my projects).
A considered real-time operating system such as RTX, Xenomai, Micrium or VXWorks are not really real-time under my terms (or under the terms of electronic engineers). So I prefer to talk about soft-real-time and hard-real-time applications. An hard-real-time application has an acceptable jitter less than 100 ns and a heat-beat of 100..500 microseconds (tick timer).
After lots of readings about operating systems I realized that typical tick-time is 1 to 10 milliseconds and only one task can be executed each tick. Therefore the tasks take usually much more than one tick to complete and this is the case of most available operating systems or micro kernels.
For my applications a typical task has a duration of 10..100 microseconds, with few exceptions that can last for more than one tick. So any real-time operating system cannot not fulfill my requirements. That is the reason why other engineers still not consider operating system, micro or nano kernels because the way they work is too far from their needs. I still want to struggle a bit and in my case I now realize I have to consider a new category of operating system that I never heard about (and that may not exist yet). Let's call this category nano-kernel or subtick-scheduler
In such dreamed kernels I would find:
2 types of tasks:
Preemptive tasks (that run in their own memory space)
Non-preemptive tasks (that run in the kernel space and must complete in less than one tick.
Deterministic kernel scheduler (fixed duration after the ISR to reach the theoretical zero second jitter)
Ability to run multiple tasks per tick
For a better understanding of what I am looking for I made this figure below that represents the two types or kernels. The first representation is the traditional kernel. A task executes at each tick and it may interrupt the kernel with a system call that invoke a full context switch.
The second diagram shows a sub-tick kernel scheduler where multiple tasks may share the same tick interrupt. Task 1 was summoned with a maximum execution time value so it needs 2 ticks to complete. Task 2 is set with low priority, so it consumes the remaining time of each tick upon completion. Task 3 is non-preemptive so it operates on the kernel space which save some precious context switch time.
Available operating systems such as RTOS, RTAI, VxWorks or µC/OS are not fully real-time and are not suitable for embedded hard real-time applications such as motion-control where a typical cycle would last no more than 50 to 500 microseconds. By analyzing my needs I land on different topology for my scheduler were multiple tasks can be executed under the same tick interrupt. Obviously I am not the only one with this kind of need and my problem might simply be a kind of X-Y problem. So said differently I am not really looking at what I am really looking for.
After this (pretty) long introduction I can formulate my question:
What could be a good existing architecture or framework that can fulfill my requirements other than a naive bare-metal approach where everything is written sequentially around one master interrupt? If this kind of framework/design pattern exists what would it be called?
Sorry, but first of all, let me say that your entire post is completely wrong and shows complete lack of understanding how preemptive RTOS works.
After lots of readings about operating systems I realized that typical tick-time is 1 to 10 milliseconds and only one task can be executed each tick.
This is completely wrong.
In reality, a tick frequency in RTOS determines only two things:
resolution of timeouts, sleeps and so on,
context switch due to round-robin scheduling (where two or more threads with the same priority are "runnable" at the same time for a long period of time.
During a single tick - which typically lasts 1-10ms, but you can usually configure that to be whatever you like - scheduler can do hundreds or thousands of context switches. Or none. When an event arrives and wakes up a thread with sufficiently high priority, context switch will happen immediately, not with the next tick. An event can be originated by the thread (posting a semaphore, sending a message to another thread, ...), interrupt (posting a semaphore, sending a message to a queue, ...) or by the scheduler (expired timeout or things like that).
There are also RTOSes with no system ticks - these are called "tickless". There you can have resolution of timeouts in the range of nanoseconds.
That is the reason why other engineers still not consider operating system, micro or nano kernels because the way they work is too far from their needs.
Actually this is a reason why these "engineers" should read something instead of pretending to know everything and seeking "innovative" solutions to non-existing problems. This is completely wrong.
The first representation is the traditional kernel. A task executes at each tick and it may interrupt the kernel with a system call that invoke a full context switch.
This is not a feature of a RTOS, but the way you wrote your application - if a high priority task is constantly doing something, then lower priority tasks will NOT get any chance to run. But this is just because you assigned wrong priorities.
Unless you use cooperative RTOS, but if you have such high requirements, why would you do that?
The second diagram shows a sub-tick kernel scheduler where multiple tasks may share the same tick interrupt.
This is exactly how EVERY preemptive RTOS works.
Available operating systems such as RTOS, RTAI, VxWorks or µC/OS are not fully real-time and are not suitable for embedded hard real-time applications such as motion-control where a typical cycle would last no more than 50 to 500 microseconds.
Completely wrong. In every known RTOS it is not a problem to get a response time down to single microseconds (1-3us) with a chip that has clock in the range of 100MHz. So you actually can run "jobs" which are as short as 10us without too much overhead. You can even have "jobs" as short as 10ns, but then the overhead will be pretty high...
What could be a good existing architecture or framework that can fulfill my requirements other than a naive bare-metal approach where everything is written sequentially around one master interrupt? If this kind of framework/design pattern exists what would it be called?
This pattern is called preemptive RTOS. Do note that threads in RTOS are NOT executed in "tick interrupt". They are executed in standard "thread" context, and tick interrupt is only used to switch context of one thread to another.
What you described in your post is a "cooperative" RTOS, which does NOT preempt threads. You use that in systems with extremely limited resources and with low timing requirements. In every other case you use preemptive RTOS, which is capable of handling the events immediately.
How is process-based multitasking achieved by using multi-threading in each process?
For example, consider when an operating system is running with two background process. Each process supports internally multi-threading features. Now, how does time slicing happen between and inside these processes, and how does time slicing happen between threads?
The scheduler typically works at the thread level. In simplest terms the scheduler gives each runnable thread its timeslice in turn.
So a process with two threads will get twice as much CPU time as a process with one thread.
From:
http://msdn.microsoft.com/en-us/library/ms684259(VS.85).aspx
"A multitasking operating system divides the available processor time among the processes or threads that need it. The system is designed for preemptive multitasking; it allocates a processor time slice to each thread it executes. The currently executing thread is suspended when its time slice elapses, allowing another thread to run. When the system switches from one thread to another, it saves the context of the preempted thread and restores the saved context of the next thread in the queue.
The length of the time slice depends on the operating system and the processor. Because each time slice is small (approximately 20 milliseconds), multiple threads appear to be executing at the same time. This is actually the case on multiprocessor systems, where the executable threads are distributed among the available processors. However, you must use caution when using multiple threads in an application, because system performance can decrease if there are too many threads."
Also check out This link for when to use multi-tasking
The operating system decides when and for how long each thread exectues. For Microsoft operating systems, there is no way to determine or predict which thread in which process will execute next. Each thread also has a priority that it runs at. Higher priority threads tend to get more time than lower This priority can be changed by the user or by a program. See this link for more info.
"Now, how does time slicing happen between and inside these processes, and how does time slicing happen between threads?"
That's entirely up to the operating system to decide, really. A really basic OS might not do time-slicing at all, and just let each process run through to completion on a first-come, first-serve basis.
However, most modern operating systems will use some flavor of scheduling algorithm to decide which thread gets to execute on which core and for how long, and perform the context-switching necessary to save and restore per-thread state when swapping out one thread for another.
I mean how and why are realtime OSes able to meet deadlines without ever missing them? Or is this just a myth (that they do not miss deadlines)? How are they different from any regular OS and what prevents a regular OS from being an RTOS?
Meeting deadlines is a function of the application you write. The RTOS simply provides facilities that help you with meeting deadlines. You could also program on "bare metal" (w/o a RTOS) in a big main loop and meet you deadlines.
Also keep in mind that unlike a more general purpose OS, an RTOS has a very limited set of tasks and processes running.
Some of the facilities an RTOS provide:
Priority-based Scheduler
System Clock interrupt routine
Deterministic behavior
Priority-based Scheduler
Most RTOS have between 32 and 256 possible priorities for individual tasks/processes. The scheduler will run the task with the highest priority. When a running task gives up the CPU, the next highest priority task runs, and so on...
The highest priority task in the system will have the CPU until:
it runs to completion (i.e. it voluntarily give up the CPU)
a higher priority task is made ready, in which case the original task is pre-empted by the new (higher priority) task.
As a developer, it is your job to assign the task priorities such that your deadlines will be met.
System Clock Interrupt routines
The RTOS will typically provide some sort of system clock (anywhere from 500 uS to 100ms) that allows you to perform time-sensitive operations.
If you have a 1ms system clock, and you need to do a task every 50ms, there is usually an API that allows you to say "In 50ms, wake me up". At that point, the task would be sleeping until the RTOS wakes it up.
Note that just being woken up does not insure you will run exactly at that time. It depends on the priority. If a task with a higher priority is currently running, you could be delayed.
Deterministic Behavior
The RTOS goes to great length to ensure that whether you have 10 tasks, or 100 tasks, it does not take any longer to switch context, determine what the next highest priority task is, etc...
In general, the RTOS operation tries to be O(1).
One of the prime areas for deterministic behavior in an RTOS is the interrupt handling. When an interrupt line is signaled, the RTOS immediately switches to the correct Interrupt Service Routine and handles the interrupt without delay (regardless of the priority of any task currently running).
Note that most hardware-specific ISRs would be written by the developers on the project. The RTOS might already provide ISRs for serial ports, system clock, maybe networking hardware but anything specialized (pacemaker signals, actuators, etc...) would not be part of the RTOS.
This is a gross generalization and as with everything else, there is a large variety of RTOS implementations. Some RTOS do things differently, but the description above should be applicable to a large portion of existing RTOSes.
In RTOSes the most critical parameters which should be taken care of are lower latencies and time determinism. Which it pleasantly does by following certain policies and tricks.
Whereas in GPOSes, along with acceptable latencies the critical parameters is high throughput. you cannot count on GPOS for time determinism.
RTOSes have tasks which are much lighter than processes/threads in GPOS.
It is not that they are able to meet deadlines, it is rather that they have deadlines fixed whereas in a regular OS there is no such deadline.
In a regular OS the task scheduler is not really strict. That is the processor will execute so many instructions per second, but it may occasionally not do so. For example a task might be pre-empted to allow a higher priority one to execute (and may be for longer time). In RTOS the processor will always execute the same number of tasks.
Additionally there is usually a time limit for tasks to completed after which a failure is reported. This does not happen in regular OS.
Obviously there is lot more detail to explain, but the above are two of the important design aspects that are used in RTOS.
Your RTOS is designed in such a way that it can guarantee timings for important events, like hardware interrupt handling and waking up sleeping processes exactly when they need to be.
This exact timing allows the programmer to be sure that his (say) pacemaker is going to output a pulse exactly when it needs to, not a few tens of milliseconds later because the OS was busy with another inefficient task.
It's usually a much simpler OS than a fully-fledged Linux or Windows, simply because it's easier to analyse and predict the behaviour of simple code. There is nothing stopping a fully-fledged OS like Linux being used in a RTOS environment, and it has RTOS extensions. Because of the complexity of the code base it will not be able to guarantee its timings down to as small-a scale as a smaller OS.
The RTOS scheduler is also more strict than a general purpose scheduler. It's important to know the scheduler isn't going to change your task priority because you've been running a long time and don't have any interactive users. Most OS would reduce internal the priority of this type of process to favour short-term interactive programs where the interface should not be seen to lag.
You might find it helpful to read the source of a typical RTOS. There are several open-source examples out there, and the following yielded links in a little bit of quick searching:
FreeRTOS
eCos
A commercial RTOS that is well documented, available in source code form, and easy to work with is µC/OS-II. It has a very permissive license for educational use, and (a mildly out of date version of) its source can be had bound into a book describing its theory of operation using the actual implementation as example code. The book is MicroC OS II: The Real Time Kernel by Jean Labrosse.
I have used µC/OS-II in several projects over the years, and can recommend it.
"Basically, you have to code each "task" in the RTOS such that they will terminate in a finite time."
This is actually correct. The RTOS will have a system tick defined by the architecture, say 10 millisec., with all tasks (threads) both designed and measured to complete within specific times. For example in processing real time audio data, where the audio sample rate is 48kHz, there is a known amount of time (in milliseconds) at which the prebuffer will become empty for any downstream task which is processing the data. Therefore using the RTOS requires correct sizing of the buffers, estimating and measuring how long this takes, and measuring the latencies between all software layers in the system. Then the deadlines can be met. Otherwise the applications will miss the deadlines. This requires analysis of the worst-case data processing throughout the entire stack, and once the worst-case is known, the system can be designed for, say, 95% processing time with 5% idle time (this processing may not ever occur in any real usage, because worst-case data processing may not be an allowed state within all layers at any single moment in time).
Example timing diagrams for the design of a real time operating system network app are in this article at EE Times,
PRODUCT HOW-TO: Improving real-time voice quality in a VoIP-based telephony design
http://www.eetimes.com/design/embedded/4007619/PRODUCT-HOW-TO-Improving-real-time-voice-quality-in-a-VoIP-based-telephony-design
I haven't used an RTOS, but I think this is how they work.
There's a difference between "hard real time" and "soft real time". You can write real-time applications on a non-RTOS like Windows, but they're 'soft' real-time:
As an application, I might have a thread or timer which I ask the O/S to run 10 times per second ... and maybe the O/S will do that, most of the time, but there's no guarantee that it will always be able to ... this lack of guarantee is why it's called 'soft'. The reason why the O/S might not be able to is that a different thread might be keeping the system busy doing something else. As an application, I can boost my thread priority to for example HIGH_PRIORITY_CLASS, but even if I do this the O/S still has no API which I can use to request a guarantee that I'll be run at certain times.
A 'hard' real-time O/S does (I imagine) have APIs which let me request guaranteed execution slices. The reason why the RTOS can make such guarantees is that it's willing to abend threads which take more time than expected / than they're allowed.
What is important is realtime applications, not realtime OS. Usually realtime applications are predictable: many tests, inspections, WCET analysis, proofs, ... have been performed which show that deadlines are met in any specified situations.
It happens that RTOSes help doing this work (building the application and verifying its RT constraints). But I've seen realtime applications running on standard Linux, relying more on hardware horsepower than on OS design.
... well ...
A real-time operating system tries to be deterministic and meet deadlines, but it all depends on the way you write your application. You can make a RTOS very non real-time if you don't know how to write "proper" code.
Even if you know how to write proper code:
It's more about trying to be deterministic than being fast.
When we talk about determinism it's
1) event determinism
For each set of inputs the next states and outputs of a system are known
2) temporal determinism
… also the response time for each set of outputs is known
This means that if you have asynchronous events like interrupts your system is strictly speaking not anymore temporal deterministic. (and most systems use interrupts)
If you really want to be deterministic poll everything.
... but maybe it's not necessary to be 100% deterministic
The textbook/interview answer is "deterministic pre-emption". The system is guaranteed to transfer control within a bounded period of time if a higher priority process is ready to run (in the ready queue) or an interrupt is asserted (typically input external to the CPU/MCU).
They actually don't guarantee meeting deadlines; what they do that makes them truly RTOS is to provide the means to recognize and deal with deadline overruns. 'Hard' RT systems generally are those where missing a deadline is disastrous and some kind of shutdown is required, whereas a 'soft' RT system is one where continuing with degraded functionality makes sense. Either way an RTOS permits you to define responses to such overruns. Non RT OS's don't even detect overruns.
Basically, you have to code each "task" in the RTOS such that they will terminate in a finite time.
Additionally your kernel would allocate specific amounts of time to each task, in an attempt to guarantee that certain things happened at certain times.
Note that this is not an easy task to do however. Imagine things like virtual function calls, in OO it's very difficult to determine these things. Also an RTOS must be carefully coded with regard to priority, it may require that a high priority task is given the CPU within x milliseconds, which may be difficult to do depending on how your scheduler works.