I have a mirth system on a windows server. The system was running properly. Then, suddenly, I was only able to launch Mirth Administrator when logged in as Admin on Windows Server. For all other accounts, if I right click the mirth icon in the system tray, click Run Administrator and give my credentials, Mirth will hang on "Loading Preferences." If I am not logged in as administrator then all of the buttons are greyed out in the Mirth Server Manager menu and if I click OK, I get an error message saying "could not save file conf\mirth.properties"
It seems like Mirth is suddenly having trouble communicating with the mirthdb--maybe because of a permissions issue. But I can't figure out why.
The only change I've made to the system is installing .NET 4.
Any suggestions on how to debug this?
I'm not sure why your users would have had access in the first place, but in my experience, for all applicable non-administrative accounts, AD security groups, etc, you need to grant read/write permissions to C:\Program Files\Mirth. Also, if you have configured the Mirth Service to run under a particular non-administrative account, then that account will also need permissions to the Mirth folder.
However, there is an alternative means of accessing the Mirth Administrator. Instead of logging directly into the server, open a web browser on your local machine, and navigate to:
http://myservername:8080
You should be greeted with a webpage, and on it, a single buttom labelled "Launch Mirth Connect Administrator." So long as you have the JVM installed on your local machine, you should be able to load and launch the Mirth Administrator directly from there.
Related
Whenever I try to open process definition in drools , Getting the Below Error
Invalid credentials to load data from remote server. Contact your system administrator.
I have given all permissions to role permission to user but still this error shows up.
While many details from your problem are not clear, here is the bottom line of this issue.
You are logging into the business-central with user 'nithish'. This user, will be used in the remote REST requests to your kie server instance. This means that user 'nithish' needs to exists on the kie-server side as well - otherwise kie-server will not recognise that user, thus authentication will fail. He needs to be created there with the same password and same roles as are present on the business-central side. I would advise at least
kie-server, rest-all,admin
roles.
The server you've installed your business central on has no access rights.
I am upgrading Collaborative lifecycle management version to 6.0.5 current version is 5.0.2. As specified in IBM Interactive upgrade guide one of the step is to run upgrade script on your databases and below are the command
cd D:\IBM\JazzTeamServer6.0.5\server
upgrade\jts\jts_upgrade.bat -oldJTSHome "D:\IBM\JazzTeamServer5.x\server\conf" -updateTomcatFiles no -updateAppServerFiles no
After running this command I am getting message as "Upgrade must be run with administrator rights"
I am logged in as administrative user on the system, assigned all the full access control permission of folder where CLM server is installed to user still everytime same problem persist.
I was going through links to troubleshoot the problem but nothing seems to be working out for me. Some of the links I have referred are
https://www.techsupportall.com/how-to-enable-administrator-account-on-welcome-screen/
http://www.thewindowsclub.com/elevated-privileges-windows
Can anyone please suggest I am missing anything here?
This could be caused by User Account Control, a feature which makes so that, even if you have administrative rights, you don't actually have them unless you explicitly request them. There are two distinct policies governing UAC behaviour (both found in Computer settings\Windows settings\Security settings\Local policies\Security options), one for the built-in Administrator account, and another one for all other administrative users:
User Account Control: Admin Approval Mode for the built-in Administrator account (disabled by default)
User Account Control: Run all administrators in Admin Approval Mode (enabled by default)
What this means is: by default, the built-in Administrator account is not affected by UAC, while all other administrative users are; thus, it's possible for an administrative user (different from the built-it Administrator) to not actually have administrative rights, even if it's a member of the Administrators group.
More info -> https://learn.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2008-R2-and-2008/dd835564(v=ws.10)
In our current environment all the users who would like to access ClearCase will require local administrative rights and i'm looking into the options to remove the local admin privs constraint so that all the users should be able to access if they are part of clearcase domain groups like CCUsers.
Local admin privilege should only be required for installing ClearCase, especially when it comes to the MVFS (MultiView FileSystem) part.
But it is also used for launching ClearCase services. Without a privilege elevation, you would see:
C:\>net start albd
System error 5 has occurred.
Access is denied.
From Windows Services
Unable to open service Albd for writing on Local Computer
Error 5: Access is denied.
First, check if you can set those services as "Automatic": they should be started during Windows Startup, even if the user is not an administrator.
This thread recommends:
Click on Atria Location Broker service and select Properties.
On the General tab, "Startup type" should be "Automatic".
On the Log On tab, select the radio button to Log on as "This account" and enter the ALBD user account and password that you should have already setup (e.g. your-domain\clearcase_albd). If you do this properly, the Atria Location Broker service should start automatically for any user.
See also "Troubleshooting ALBD startup failures on Microsoft Windows".
I am currently using Tableau for my reporting module. However, I have several issues I need answered. I tried the following; please comment if I am on the right track.
I want to embed Tableau generated report to my website, so I used Javascript API. My data may come from Tableau Online (Cloud Server), or Tableau Server, for now I used Tableau Online.
Now, I have to create my report so I used Tableau Desktop to create how my report would look like. Tableau Desktop can connect to my local DB for get data.
Then, I published my workbook to my server . However, in Tableau Online, I need to data connection which fails since I don't have a live server.
I downloaded Tableau Server but I can't proceed since in configuration it want an Active Directory credentials.
I haven't done any output, I think I am stuck. I would welcome some input.
Tableau supports both Active Directory and Local Authentication Mode. We have tableau server running in local authentication mode but however its not highly advisable to run the server in local authentication.
If you have installed tableau server in active directory mode, reinstall the server. During your reinstall select local authentication as the default authentication. Once you have installed it, you need to add on Administrator Account.
Another workaround is go to All Programs > Tableau Server > Configure Tableau Server. In General Tab, you will be having the User Authentication. Try changing it if its enabled. If its disabled you need to reinstall tableau.
below are the steps to reinstall tableau server
Back up and remove Tableau Server
When Tableau Server has been uninstalled, open Windows Explorer and navigate to C:\Program Files\Tableau.
Delete the Tableau Server folder.
Navigate to the C:\ProgramData\Tableau.
Delete the Tableau Server folder.
Reinstall Tableau Server and restore the backup
Install Tableau Server. This step will allow you to set a new authentication method.
After installing Tableau Server, a browser window will display and you will be prompted to create a new administrator account. Ignore this, and close the browser window.
After restoring your backup file, a browser window will display and you will be prompted to create a new administrator account again. Ignore this, and close the browser window. If you are prompted to type in the Run As user password, type the password and continue with the next step. You will not see a password confirmation.
In the Command Prompt window, from the Tableau Server bin directory, type the following command to reset Tableau Server back to a state that requires an administrator account to be set up:
tabadmin reset
Open a browser window, and type http://localhost in the address bar to set up the administrator account for Tableau Server.
I may have assumed that when you say Tableau Online, you dont mean the Tableau Public..
I assume your tableau online is your local or let's say company hosted tableau server...
for the answers to your questions in sequence
1 - 3 it can be done.
tableau supports a lot of datasources even the classic text based data it can read..
did you tried installing your database drivers?
If the server is configured to use local authentication, when you add
a user identity, you specify a username, a password and a site role.
In that case, the Tableau Server repository is used exclusively to
authenticate the user.
http://onlinehelp.tableau.com/current/server/en-us/security_auth.htm
Have VS-2003, VS-2005, VS-2008
Tried enabling MSMQ in Add/Remove Windows Components and get this
'A local user is authenticated as an anonymous user and cannot access active directory. You need to log on as a domain user to access Active directory.'
I am trying to do development on my machine and want to set up a private Q so that I can develop a MSMQ application.
This is similar to this situation: I am on my machine as an admin. Am logged into VPN and trying the above.
link text
Uncheck the "active directory integration" option in the "add windows component" gui. It is not needed for private queues.